Fullscreen slideshow will not "slide" automatically

To make it easy for my collegues to show a slideshow in full screen with 5 sec. delay and a soft transistion, I have made one in Acrobat and expect people to run it with 1 click in their Acrobat Reader X. It seems like I can store these parameters in acrobat PRO X under: EDIT-PREFERENCES-FULLSCREEN. There you can take away the "Alert when document requests full screen",  set the speed of the full screen slideshow and ask it to loop. THE PROBLEM: even after saving the parameter the file wont start automaticilly to change slides. YES I know i can change the settings back to advance the show in Reader on each computer, but the hole point is to make a Oneclick experience. How can I pack the parameters into the file once and for all? PS You need a PC without Acrobat (only the reader) to remake my problem.

I had the same problem. Here is what you need to do:
1. Collect all your videos in one folder on your Mac
2 Through iTune transfer them to iPad via photo. Now they will be on your iPad
3. Open your presentation in Keynote on iPad.
4. Delete he video.
5. paste he video from your folder with the video in your iPad
6. automate it to come as a cube.
All set to go

Similar Messages

  • Ipod touch not recognised by Itunes and will not slide to unlock.

    Hi,
    I got my Ipod touch 32GB 3rd gen for christmas last year, my battery ran flat some time last week. When i plugged it into my computer via USB to charge, it charged for a few minutes then stoped. When i looked and tryed to unlock the Ipod, it will not slide to unlock, same with the slide to power off, I have pushed both home and power botton to reset; both plugged into compter and not however after the reset it still will not unlock. when pluged into itunes i get a message saying it needs a full factory settings restore, i start that process, however i am shown an error message which reads "the Ipod software update server could not be contacted. An unknown error occured (1612)".
    Sorry about the long post, can anyone help, has this sort of thing happened with anyone else before?
    Any help would be much appreciated.
    Thanks Alot.

    - See if this program will get it out of recovery mode:
    RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov
    - Next see if you can place the iPod in DFU mode and then restore the iPod.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to.

    I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.

    Are there any previous networks that you have used that have the same password as Molly?  YES
    Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
    Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
    Delete any other networks that you no longer need so that your Mac will search for networks more quickly
    Click OK, then click Apply
    Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
    Then look for any old networks that might have used the name Molly in the past and do the same for them.
    Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
    Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
    and then click KeyChain First Aid
    Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
    Quit Keychain Access
    Power down the entire network...all devices...order is not important
    Power up the modem first, then your main router, the other devices one at a time
    Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system.

  • My phone will not slide to unlock and it has a line around the date

    my phone will not slide to unlock and when i try to slide it a box appears around the area and if i touch the time on the screen a box appears round that too. i have held the touch button and the on/off button together and waited for the apple icon to appear but when it all comes back to life its just the same it won't let me swipe to open the screen

    Hello there, lawrence5nwk.
    Great job on troubleshooting your issue so far. The following Knowledge Base article provides additional assistance and recommendations for troubleshooting your issue:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • IPhoto album slideshow will not play in the manually sorted order.

    iPhoto Album slideshow will not play in the manually sorted order.

    Use a regular slideshow created by "File > New Slideshow".  These will play manually sorted. The instant slideshows cannot be played in a manual sort order.

  • The iMessage button will not slide on in the settings. What is going on?

    The iMessage button will not slide on/green in the settings. Whay is going on?

        teachersyd, thanks for keeping us posted. We're relieved to hear that your device issue has been resolved. However, if the issue persists, we're standing by to further assist you. Additionally, for your convenience, you can access our device support website page here: http://vz.to/1bJ0BOF
    LasinaH_VZW
    Follow us on Twitter @VZWSupport

  • Itunes will not start automatically when iphone plugged in

    itunes will not start automatically when iphone is plugged in.  it used to.  now it turns on iphoto but not itunes.  the option to check "open itunes when this iphone is connected" is ghosted and cannot be selected.
    i have ios 5 now, but it also did this with the previous os.

    Hi billm1013,
    I'm sorry to hear you are having these issues with your iPhone. If your iPhone isn't being recognized in iTunes, and/or iTunes isn't responding to your mouse when the iPhone is connected, you may find the troubleshooting steps outlined in the following article helpful:
    If you don't see your connected device in iTunes for Mac - Apple Support
    Regards,
    - Brenden

  • Verizon Media Manager will not start automatically with Windows, even though it is set to do so.

    Verizon Media Manager will not start automatically with Windows, even though it is set to do so.  This started with the latest update.  I see that the desktop icon for Media Manager now has a security shield on it, and it requires UAC confirmation when you start it, which I don't remember the old version doing.
    One thing I noticed, msconfig.exe shows that "C:\Program Files\Verizon\McciTrayApp.exe" is set to start at Windows startup, but the desktop icon used to start Media Manager manually has a target of ""C:\Program Files\Verizon\Verizon Media Manager\Release\Verizon Media Manager.exe" Verizon Media Manager".
    I don't remember what the previous version was, but this one is 9.4.86.  It asked me if I wanted to update it a few days ago, and I said yes.
    I am running Windows 7 Home Premium.
    Solved!
    Go to Solution.

    Try setting the startup option to off and then to on again. It looks to be pointing to a wrong location.
    Attached is a partial screen shot of my msconfig setting.
    Attachments:
    media manager startup cmd line.jpg ‏18 KB

  • After Upgrade, Windows Service will not start automaticly

    I just upgraded from 10.2 to 10.4. When I did the Windows File Service, will not start automaticly. I can start it manually, after a reboot. Any idea on how to fix this?

    I am having the same problem on a clean install of Server 10.4.10, AFP & Web starts automatically on restart, but not Windows Service. This is the first time I have run into this, it starts fine on all other servers I administer. Then entry in /etc/hostconfig for SMBSERVER is set to "-YES-", there is no errors or messages of any kind in the console or system log, it just won't start.
    This complicated with the problem I am having on the same server where I cannot connect via ARD after reboot without someone there physically plugging a monitor into the video port first (another open post I have - http://discussions.apple.com/message.jspa?messageID=5850246#5850246 ). So, doing maintenance at off-hours is almost unworkable.

  • SunONE CS 5.1.1 HTTP Service will Not Start Automatically

    Hello,
    I have just upgraded from iPlanet Calendar Server 5.1 to SunOne Calendar Server 5.1.1. (great improvement). However, the HTTP service will not start automatically on boot anymore. But after the boot sequence, I can start in manually. There are no errors posted to the Event Log so I am not sure what exactly is happening here. Maybe an ICS.CONF setting? I am doing this on Windows NT Server 4.0, SP6a. Any help would be great - thanks.

    This is due to the fact that the directory server was not ready when the calendar needed it. I assume the directory server is running on the same machine as the calendar server.
    What you have todo is the following :
    you must create a dependancy between the http NT service and the LDAP NT service
    - run regedt32.exe
    - goto HKEY_LOCAL_MACHINE
    - goto \system\currentcontrolset\services\iplanetcalendarhttpservice5
    - you will see that this entry has alread an attribute with the name DependOnService
    - click on it, and it will open
    - add below tcpip the name of the service of the ldap. This service name can be found in the same
    \system\currentcontrolset\services\
    tree and begins with slapd-<instance-name>
    when you reboot now, the http will wait until the LDAP has succesfully started before starting HTTP.

  • TS3992 I am not able to backup my iphone to Icloud because my wi-fi is greyed out on my phone. The wi-fi button will not slide to the ON position, therefore, Iam unable to backup my phones contents. What can I do?

    I am not able to backup my Iphone to Icloud because my wi-fi is greyed outon my phone.  The wi-fi button will not slide to the ON position, therefore, Iam unable to backup my phones contents. What can I do? I need to save my pics, info....etc, because I have to get another phone.

    Back up to your computer instead.  To do this, connect your phone to your computer, open iTunes, click on the name of your phone in iTunes, go to the Summary tab of your iTunes sync settings and click Back Up Now.  Also go to File>Devices>Transfer Purchases to transfer your apps and other purchased media to your iTunes library.  Finally, save any photo stream photos to your camera roll (open your my photo stream album, tap Edit, tap the photos, tap Share, tap Save to Camera Roll), then import your camera roll photos and videos to your computer as explained here: http://support.apple.com/kb/HT4083.  (You don't need to delete them from your phone afterwards unless you need the space.)
    If you're getting another phone, be sure to delete your iCloud account and turn off iMessage, FaceTime and Game Center before doing so.  (See http://support.apple.com/kb/HT5661).
    This is a support article on your wifi issue: http://support.apple.com/kb/ts1559.

  • HT4061 the phone will not slide to unlock

    My iphone S4 is locked and will not slide to unlock

    I just had this problem two days ago and the Apple support line suggested that I press power and home button at same time. It took a few tries and the Apple logo showed and everything started working again. The screen now is sensitive to touch and I can unlock it to answer called, etc.
    Thank you Apple
    John47

  • Ipad screen will not slide to open

    ipad screen will not slide to open

    Reboot:  Press and hold BOTH the power and home buttons at the SAME time for about 10 seconds (ignore the red slider to shut down until the Apple Logo appears, then let go of both buttons and your iPad should restart.  You won't lose any data or settings.

  • Macbook will not sleep automatically

    Hi
    I've recently noticed that my Macbook will not sleep automatically, even when the power management is set to sleep at minimum (1 minute).
    It will sleep if I do it via the menu, however if I walk away from the machine with the lid up, it just won't go to sleep.
    I've tried switching everything off that could possibly be running in the background, tried from a new user account and also tried a power management and zapped the P Ram.
    Up until a few weeks ago it's been running fine, don't know what's happened since, any help would be appreciated.
    Thank you
    Kiran

    mscpro
    Thanks, i've pasted below some of the text that was shown in 'Console', the last line was repeated several times so i've only copied it once.
    I have no idea what this means, except there is some sort of error, how would you suggest I proceed.
    Mac OS X Version 10.4.11 (Build 8S2167)
    2008-05-28 06:56:38 +0100
    2008-05-28 06:56:38.801 loginwindow[67] FSResolveAliasWithMountFlags returned err = -43
    2008-05-28 06:56:39.735 SystemUIServer[83] lang is:en
    2008-05-28 07:04:44.405 SyndicationAgent[216] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 27 May 2008 22:26:15 -800'
    thanks
    Kiran

  • Screen will not slide to unlock

    the screen on my ipod touch will not slide to open.

    Try the standard fixes:
    - Reset. Notihng will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.
    - Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem.

Maybe you are looking for

  • Using a second computer when the first takes a dive

    I need serious help....simply put: My original computer died on me and I cant seem to get any of my info from itunes or download my library off my nano....any ideas??? I know someone has had to have been through this before.

  • Data Adapter Configuration Wizard and custom datatype's

    I was wondering if there is planned support for GUI wizards similar to the Microsoft wizards that appear when you add a data adapter to a form at design time. These wizards appear when you use the Microsoft OracleClient, OLEDB or SQL Server client. T

  • Bespoke Oracle Forms and Reports and Adobe LiveCycle

    I'm looking to produce dynamic questionnaire letters from Oracle Reports. Currently they're produced in PDF format. I now need to get them into a format where the recipient can enter their responses, save the doc and then email the doc back to the se

  • Re: ISU and BI

    Hi All, I have some question related to ISU and BI. Any one can help me out. 1) Is it ISU is separate server or component of ECC ? 2) What is the Architecture of ISU? 3) As a BI consultant what are we need to know in ISU 4) Any setting we do, to extr

  • USB recovery disk won't restore System Image - U410 internal harddrives don't load? Error 0x80042414

    Hello all. My name's Richard and I have a problem.  My U410 was stolen (bastards!) on Christmas Eve (double bastards!) but I had an old System Image saved on an external hard drive. So I bought exactly the same laptop second-hand intending to restore