Functional Location Required field- Notification processing
Hello All,
I would like to maintain Functional Location as a Required field for certain Notification Types. In IMG:
Plant Maintenance and Customer Service>Maintenance and Service Notifications>Notification Creation>Notification Types>Set Field Selection for Notifications
Field Selection for Maintenance Notifications
Field Selection Reference Objects PM Notification
When I Select Field Selection for Maintenance Notifications>Select Influencing: Notification Types and Selected the desired Notification Type and set Functional Location as a Required field the Notification Type does not have Functional Locatiion as a Required Field.
When I select Field Selection Reference Objects PM Notification:ISelect Influencing: Notification Types and Selected the desired Notification Type and set Functional Location as a Required field* the Notification Type does not have Functional Locatiion as a Required Field.
But When I select Field Selection Reference Objects PM Notification:Make Functional Location as a Required field and then Select Influencing: Notification Types and Selected the desired Notification Type and set Functional Location as a Required field* all the Notification Type does have Functional Locatiion as a Required Field.
How do i make the Functional Location as a Required field for a particular Notification type.
Thanks
Krish
1) Field Selection Reference Objects PM Notification
2) Click 'Influencing' button
3) Double-click 'Notification type'
4) Input your notification type on 'Contents' field, then enter
5) Select 'Required' for functional location
Save
Regards
Luke
Similar Messages
-
To maintain 'Functional Location Description' field as mandatory field
Hi All,
I am unable to maintain the "Functional Location Description" field as mandatory field (Screen Filed: IFLO-PLTXT).
In IMG settings, I am unable to find this field to change it to "required" field. Could you pls. tell me the way to make this field as mandatory.
Thanks in advance.
JKhi try t.code oiaj there is a filed of description
-
LSMW for functional location address fields
HI Folks,
I'm loading functional location thru LSMW Direct input method. I coudn't able to see any structure relation for address fileds on functional location. I have mapped the IBIPFLOC for functional location but it doesn't have any address fields. So how to load the address fields of functional location thru LSMW direct input method. Thanks in advance.Hi Praveen,
You can create a separate LSMW for this or you create a LSMW for FLoc upload along with the address details. I don't think this is possible with the standard program you have chosen.
Regards,
Bala -
Functional Location should Auto Populate when installed Equipment is select
Hi All,
In our client I have made the Functional location mandatory field during the Notification and Maintenance Order creation.
When a Work Order or Notification is created with Equipment number then Functional Location is not automatically populated.
If we create Notification and Order through IH01 then only functional location is coming automatically but I need through IW21 and IW31.
Can anybody please tell me how I can achieve this functionality?
Thanks
KAVSHi,
The functional location will be automatically populated in IW21/31 when you enter the equipment. However there is a problem if you make the functional location field mandatory. In that case the system expects user to fill the functional location field before any logic is executed to set a default. The screen processing, including checks for required fields, is processed first. So an error will be generated asking the user to fill the f/loc field. They will not be able to proceed until the field is filled by user input.
The solution is to not make the functional location field mandatory. You can then implement exits QQMA0014 (for notifications) and IWO10009 (for orders) to check that functional location field is not empty.
-Paul -
Partner data from Functional Location to Equipment
Dear Expert,
How can I transfer partner data (Bill to party, Ship to party) from Functional Location to Equipment. I have tried with 'Install with data transfer' but there is no option available for partner.
Is there is any other way to transfer partner data while assigning Equipment to Functional Location.Hi,
Functional Location:
Define field selection for partner data fields : Plant Maintenance and Customer Service --Master Data in Plant Maintenance and Customer Service -- Technical Objects -- Functional Locations --Field Selection for Multi-Level List Displays of Functional Location.
The Partner tab should be visible in the functional location: Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service-- Technical Objects-- General Data -- Set View Profiles for Technical Objects.
Assign functional location category to partner determination procedure: Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects -- Functional Locations -- Define Category of Functional Location.
Define field selection for partner data fields
Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects --Equipment -- Define Field Selection for Multi-Level List Displays of Equipment.
The Partner tab should be visible in the equipment
Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects --General Data -- Set View Profiles for Technical Objects
Assign equipment category to partner determination procedure
Plant Maintenance and Customer Service --Master Data in Plant Maintenance and Customer Service --Technical Objects --Equipment -- Assign Partner Determination Procedure to Equipment Category.
Regrads
bharat -
Requirement of functional location
Hi friends
Please clarify about the below issue
1. Client is supplying the equipment to customer as a rental , sale.Once the delevrey is over they usually installing the equipment to thier functional location. For this use actually we defined the functional location as customer location(city) name. Now the issue is if the customer is moving to different location is required to create new functional location? If so what we need to do for old functional location?
2. The client usually receiving the serialised material (machine) from supplier and then selling /renting it to customer. However they will not provide the services If they sold the machine to customer. If any repair the client will recive the equipment from customer and sent to supplier (if warrnty) or sent to sub contractor (if non warranty). Both the time they follow the procurement (PO) process. For non warranty repair they raise the billing agianst the customer by sales process. Now tell me is required to create the equipment master ?
Thank you
ThennaHello thenna arasu ,
The process is clearly explined in the previous posts . In addition to that
1. For each sales ( Delivery ) create equipment and do the installation at functional location here the Fuctional location is same as your customer premises. so incase you are making Notification you will have all the details and also partner details . If the location is changing and you will know only at time of complaint generaintg you can think of changing the location data through cuszomization before registering the complaint .
2. If youn want to track warranty and need more controll over your services you must create eqipment master .
With Regards
Aswin Nair -
Way to update header and address fields to a functional location simultane
Hi all,
Can you please help me out in this.
I used the FM u201CISU_M_FUNCLOC_CHANGEu201D for changing the Functional data (Including Header and Address data), but this FM will not work for my requirement as it clears the entire data in the transaction and updates the one which i pass. I looked for the BAPI u201CBAPI_FUNCLOC_CHANGEu201D, this is also not working to update the Address fields.
Please let me know the way i can update the header as well as address fields in a functional location simultaneously.not possible to upload data header and multiple items upload through LSMW-recordin
try with below LSMW- IDOC method
Message Type INOTIF Notifications
Basic Type INOTIF01 Notification IDOC
Enhancement -
Addition of sub-screen for Functional Location / Equipment / Notification
Hi All,
Can any one help me on Addition of sub-screen based on config in new tab or sub-screen for objects for Functional Location / Equipment / Notification / Notification Item / Work OrderWork Order Operation.
If you are designed the above requirement by using ABAP objects please send sample code for the same.
I am not bothering about addtional fields which you created in your program.
Thanks a lot.
-KalluriThenna,
QMIH-ILOAN -> ILOA-ILOAN
ILOA-TPLNR -> IFLOT-TPLNR
PeteA
[www.pjas.com] -
Functional Location Field In AS02 (Time dependent)
Hi All,
I need to know if it is possible to add or show functional location in time-dependent tab(tcode AS02), because i found TPLNR(functional location) in table ANLZ. Fyi, ANLZ is the source table of time-dependent tab in tcode AS02.
Really appreciate your help
ThanksDear:
First see layout assigned to your class through OAOA and then go to the path SPRO....Financial Accounting...Asset Accounting...Master Data....Screen Layouts...Define screen layout for master data...select layout...logical field group...select time dependent data...field group rules.. There you will find 89 (functional area)... Make its status optional or mandatory whatever you require.
This will show the field in AS01 for data input.
Regards -
Euipment or Function location field Mandatory in Work Order
Hi
How to make either Equipment or Function location ( either of the one) mandatory in Work Order.
Thanks ini advance
ThiyagarajanHi ,
The field equipment or f.loc can be made mandatory using transaction variants -- but it would be applicable for all order types .....
1.use tcode SHD0 , give IW31 in Transaction code and ZIW31 in transaction variants and press create ..
2.this would take you to IW31 initial screen and enter planning plant and order types and press enter this would give the dialog box of screen variant .Here press continue and this would take you to inside screen .
3.Here you again press enter and by entering some required data you can finally reach to screen variant of reference object
and can mark the equipment or f.loc field mandatory as required .
4.Once this is finished you can you can select local object and save ... and come back and test the same ... now this trans varint ZIW31 can be assigned to user group ...
go thru the documentation of SHD0 for bette information
regards
pushpa -
Functional locations from order to notification
Hello
We have a small problem regarding how the functional location field in the notification is filled. The user creates an order Iw31, and on his peronal settings there is defined a value for functional location, the top of a hierarchy. In the order he changes this value to the correct functional location, and everything else in the order, then he saves it and a notification is created (for some ordertypes) in that notification the functional location is not from the order, but from the personal settings, if we remove the personal settings the notification is updated correct. Is there a way to get it updated correct without removing the value from the personal setting?
IvarIts not possible when you set User Default values settings. Check the below links.
From SAP Help:
If you create notifications in which certain data is always the same, you can permanently define certain user default values to make it easier to create the notifications. The system automatically copies this default data into the appropriate notification fields. You can, however, overwrite the proposed information.
http://help.sap.com/saphelp_470/helpdata/en/3c/abc57c413911d1893d0000e8323c4f/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/2d/352680448c11d189420000e829fbbd/content.htm -
PM Notification contains functional location after dismantling
Dear Gentlemen,
We are facing the following problem.
An equipment is installed on a functional location.
A maintenance notification is created for the equipment.
The maintenance notification automatically takes on the functional
location number.
Now an order is created for the functional location that does NOT refer
to the notification mentioned. With a reservation referring to the orderthe equipment is dismantled from the functional location with transaction
IE4N.
The equipment is now in stock and no longer installed on the functional
location. However, the original notification still refers to the
functional location.
When we execute transaction IW28 (overview of notifications for the
functional location) the notification is still displayed in spite of thefact that the notification is for the equipment that does not belong to
the functional location anymore.
Is there a way to remove the functional location automatically from the
notification for the equipment after the dismantling operation has takenplace?
Thanks a lot and best regards
Pierre Peeters
Steps for Reconstruction
1) Equipment installed on functional location
2) Transaction IW21 to create a notification for the equipment
3) Notification contains the functional location
4) Transaction IW31 to create an order the functional location
5) Enter the material of the equipment as a reservation
6) Release the order with transaction IW32
7) Transaction IE4N to dismantle the equipment from the functional
location with reference to the reservation from the order
8) Transaction IW28 to display all notifications for the functional
lcoation. The notification is still displayed but the equipment is no
longer installed on the functional location!Hi Pierre,
The Procedure followed by SAP is to maintain the state of equipments during creation of the notification. The process in the notification is before dismantling of the equipment so standard process says you should complete the noitification rather than changing the equipment in the notification.
Now for better explanation, can you just specify for what case the notification is created? And what is the problem if the functional location is not removed?
Regards,
Chin2 -
Partner function for notification processing in SPRO.
Hi Gurus,
I have to know that what is the use of settings for Partner function for notification processing in SPRO(implementing dptmnt,person responsible,function for paging,Task processor,partner function approver).what is the function for these?
2'nd in while creating/changing the notification in the notification screen in standard tool bar there are two Icons one for partners(ctrl+F1) and another for determine partner(F7).Pls explain what is use of this icon determine partner.???
Pls explain in details....hi
1.Refer the below threads,links
[Partner determination procedure and partner function;
[http://help.sap.com/saphelp_46c/helpdata/en/42/51b39b4a1211d182b80000e829fbfe/content.htm]
2.Partner are determined from master datas like equipment,functional location during notiifcations,order creation.
you can have defualt and mandatory partners
Regards
Seenu -
Is required Functional location
Hi Guys
There is small consfusion about the solution.Actually the client receiving thier own(rented) equipments, customer equipments for servicing. For own equipments ,If its under warranty they do the services and get the claim from supplier. Unless no warranty they do services and charge to customers.Customer equipment they sent to some third party to get the job done and then charge the cost to customer accordingly.
Here my query is that, required to mainatain the functional location to keep the repair equipments ? Is needed the maintenance plant ? How to track the warrnty repair costs and non warranty repair costs seperately?
Please have your suggestion.
Regards
ThennaI feel, Functional location may not be required. You can use location field for that purpose. As service includes spare parts delivery as well, create one miantenance plant same as planning plant. you can create different storage location based on the location.
-
Help required: class assignment and values for functional location
Hi All,
My requirement is to get classification data for a functional location as in IL03.
Can any one let me know where in the standard program are they getting the assigned classes
and class values. So that I can use the same logic.
Thanks.FM BAPI_OBJCL_GETDETAIL
OBJECTKEY ?0100000000000011643
OBJECTTABLE IFLOT
CLASSNUM ZPMI_BLDG
CLASSTYPE 003
KEYDATE 29.07.2009
UNVALUATED_CHARS
LANGUAGE EN
Cheers!
Maybe you are looking for
-
Question about Global index and Table Partitions
I have created a global index for a partitioned table now in the future the partitions will be dropped in the table. Do I need to do anything to the global index? Does it need to be rebuilt or would it be ok if partitions get dropped in the table?
-
How to send images into another panel
hi i got two panels and one panel creates a couple of images and the confusing thing is that i don't want that panel to display my images but i want the other side panel to display these images.. but i don't know how to do it. actually i can create t
-
Finder WebDAV still unreliable to the point of impossible: MobileMe misery
The biggest let down in 10.6, including 10.6.2, from my perspective is WebDAV in the Finder. It is incredibly BUGGY. This was not the case previously, despite a very long history of WebDAV flakiness in general. Typical experience: I am on my MobileMe
-
No autocorrect in iPhone safari search???
Why doesn't my safari search engine have autocorrect? It's really frustrating when I want to search for something. Is there a way to turn this on? My autocorrect is on in settings. Thanks.
-
Hi . I want to know how we can associate reference Operation Set to a Routing with using the FM: CP_BD_DIRECT_INPUT_PLAN (The Direct Input API for Routing update) . I am successful with creation of Operations(Table: PLPO_DI_TAB). I found few field