Requirement of functional location

Hi friends
Please clarify about the below issue
1. Client is supplying the equipment to customer as a rental , sale.Once the delevrey is over they usually installing the equipment to thier functional location. For this use actually we defined the functional location as customer location(city) name. Now the issue is if the customer is moving to different location is required to create new functional location? If so what we need to do for old functional location?
2. The client usually receiving the serialised material (machine) from supplier and then selling /renting it to customer. However they will not provide the services If they sold the machine to customer. If any repair the client will recive the equipment from customer and sent to supplier (if warrnty) or sent to sub contractor (if non warranty). Both the time they follow the procurement (PO) process. For non warranty repair they raise the billing agianst the customer by sales process. Now tell me is required to create the equipment master ?
Thank you
Thenna

Hello thenna arasu ,
The process is clearly explined in the previous posts . In addition to that
1. For each sales ( Delivery ) create equipment and do the installation at functional location here the Fuctional location is same as your customer premises. so incase you are making Notification you will have all the details and also partner details . If the location is changing and you will know only at time of complaint generaintg you can think of changing the location data through cuszomization before registering the complaint .
2. If youn want to track warranty and need more controll over your services you must create eqipment master .
With Regards
Aswin Nair

Similar Messages

Functional Location Required field- Notification processing

Hello All,
I would like to maintain Functional Location as a Required field for certain Notification Types. In IMG:
Plant Maintenance and Customer Service>Maintenance and Service Notifications>Notification Creation>Notification Types>Set Field Selection for Notifications
Field Selection for Maintenance Notifications
Field Selection Reference Objects PM Notification
When I Select Field Selection for Maintenance Notifications>Select Influencing: Notification Types and Selected the desired Notification Type and set Functional Location as a Required field the Notification Type does not have Functional Locatiion as a Required Field.
When I select Field Selection Reference Objects PM Notification:ISelect Influencing: Notification Types and Selected the desired Notification Type and set Functional Location as a Required field* the Notification Type does not have Functional Locatiion as a Required Field.
But When I select Field Selection Reference Objects PM Notification:Make Functional Location as a Required field and then Select Influencing: Notification Types and Selected the desired Notification Type and set Functional Location as a Required field* all the Notification Type does have Functional Locatiion as a Required Field.
How do i make the Functional Location as a Required field for a particular Notification type.
Thanks
Krish

1) Field Selection Reference Objects PM Notification
2) Click 'Influencing' button
3) Double-click 'Notification type'
4) Input your notification type on 'Contents' field, then enter
5) Select 'Required' for functional location
Save
Regards
Luke

Functional Location

Hi,
Client is having lot of moving Equipments. So then he want that when production person should create notifiaction, he should enter the location also to identify the location of perticular machine like welding machine. For fixed machines , that will be installed at functional location.But what about moving machines. Can i control it with any exit. Means when equipment status inst, system should fetch from Functional Location or else.
Thanx in advance
Edited by: SAPPM@10021983 on Jul 21, 2009 10:58 AM

Hi
I hope this can be done for your case...
Create New Equipment category for moving equipments.... You can create notification with respect to equipments... thats enough... in other case.. if u require a functional location... then create one functional location EX : Maintenance Room etc... Assign all the moving equipments to this functional location...
You can get the functional location datas from here... so notification will have a functional location...
Normally for moving equipments... Say Equipment A and B is working in one functional location Z for five days... but equipment A will be used in another functional after 3rd day... in such case... you need to assemble and dismantle the functional location, once the work is started and completed... you need to take care of these things...
By this.. you can track the usage of equipments at different functional location
- Pithan

PM Functional Location In Project System

Dear Expert ;
Is There Any Way Possible to Integrate PM Functional Location in PS System (Cj20n). Please any Method if Possible.

Your query is not clear, can you please explain your requirement.
Functional location is available in WBS Element which you can see it in the Assignments Tab from CJ20N.

Help required: class assignment and values for functional location

Hi All,
My requirement is to get classification data for a functional location as in IL03.
Can any one let me know where in the standard program are they getting the assigned classes
and class values. So that I can use the same logic.
Thanks.

FM BAPI_OBJCL_GETDETAIL
OBJECTKEY                       ?0100000000000011643
OBJECTTABLE                     IFLOT
CLASSNUM                        ZPMI_BLDG
CLASSTYPE                       003
KEYDATE                         29.07.2009
UNVALUATED_CHARS
LANGUAGE                        EN
Cheers!

Required to get class Charateristics and values for an functional location

Hi ,
   As per the requirement ,i have to read the class characteristics and the corresponding values for an function location.I have functional location number ,and the various class names associated with fn.location. Any pointers would be helpful
Regards
Arun T

FM BAPI_OBJCL_GETDETAIL
OBJECTKEY                       ?0100000000000011643
OBJECTTABLE                     IFLOT
CLASSNUM                        ZPMI_BLDG
CLASSTYPE                       003
KEYDATE                         29.07.2009
UNVALUATED_CHARS
LANGUAGE                        EN
Cheers!

Is required Functional location

Hi Guys
There is small consfusion about the solution.Actually the client receiving thier own(rented) equipments, customer equipments for servicing. For own equipments ,If its under warranty they do the services and get the claim from supplier. Unless no warranty they do services and charge to customers.Customer equipment they sent to some third party to get the job done and then charge the cost to customer accordingly.
Here my query is that, required to mainatain the functional location to keep the repair equipments ? Is needed the maintenance plant ? How to track the warrnty repair costs and non warranty repair costs seperately?
Please have your suggestion.
Regards
Thenna

I feel, Functional location may not be required. You can use location field for that purpose. As service includes spare parts delivery as well, create one miantenance plant same as planning plant. you can create different storage location based on the location.

User status with reference to characteristic value of the Functional locati

Hi,
For a Functional location for which a characeteristic values is maintained as"1",i want "user status of the mainteance order,when created to be updated as "XXX".Can any one of you tell me the user exit and code changes for this.Please reply at the earliest.
EX:A functional location(XXXX) has a Characteristic(xxx) has value as "1"
we have created an user status as"xxx" for the order(through status profie).Now,My requirement is
When i have created a maintenance order for the functional location(XXXX),upon on saving of the order,or Assigning the priority for the maintenance order,i want the user status has to be modified as "XXX".
Could you please tell us what to do?
is our requirement will be fulfilled with the exit"IWO10009".If so,please tell us the code to be made>
Can we map our requirement through "Object dependencies" or any other means to meet our requirement
you will be highly appreciated
with regards,
Joshita

HI joshita,
I had a similar issue in the past where i wanted to attach permit to an order based on some characteristic of functional location at user exit 'IWO10002 - Customer check for order release'.
This will solve your purpose during release of the order.
You can also use the exit 'IWO10009 - Customer Check for 'Save' Event', this will check irrespective of the status of the order.
Regards,
Deepak

Clients distributor or dealer location as functional location

Dear All,
We are implementing PM/CS module in Ice Cream Mfg. Co. Here my client purchases deep freezer and send to various distributor locations in all over India by doing some commercial agreement. In this up to the one year deep freezer is asset of my client then after one year it is asset of distributor.
Kindly go through following points & how this can be mapped in SAP PM/CS module.
1) After purchasing of deep freezer my client (Ice cream mfg. co.) send this to various distributors. They give deep freezer to distributor for one year which on Free of Cost basis. In that some maintenance is taken place, which is carried out by client (Ice cream mfg. co.) service technician. This maintenance is also carried on free of cost basis. Once one year gets completed they sell out to distributor.
So that becomes a distributoru2019s asset.
2) After one year what ever maintenance is taken place which is reported to client (Ice cream mfg. co.) then client sends technician to distributor location. He carries maintenance & charged for the same. Which may include some material cost or spares cost.
3) In this scenario can I use functional location category as u201CS - Customer system u2013 standardu201D for creating functional location. Also confirm, can I create all Distributor or Dealer location will be as functional location.
4) Whatever deep freezer is installed at distributor location, those deep freezer can I create as Equipment.
Thanks & Regards,
Sandeep Theurkar

Sandeep,
The following is the rough mapping of your requirement.
You = Ice Cream Mfg Co.,
Customer = Distributor
Equipment = Freezer
4) Whatever deep freezer is installed at distributor location, those deep freezer can I create as Equipment.
Yes, every Freezer is an Equipment
3) In this scenario can I use functional location category as u201CS - Customer system u2013 standardu201D for creating functional location. Also confirm, can I create all Distributor or Dealer location will be as functional location.
Yes, you can use Customer site as Functional location
1) After purchasing of deep freezer my client (Ice cream mfg. co.) send this to various distributors. They give deep freezer to distributor for one year which on Free of Cost basis. In that some maintenance is taken place, which is carried out by client (Ice cream mfg. co.) service technician. This maintenance is also carried on free of cost basis. Once one year gets completed they sell out to distributor.
So that becomes a distributoru2019s asset.
1a.You may use customer consignment process to maintain the Eqiupment in your stock.
1b.Create another sales order and deliver to the distributor from Consignment Stock
Service and Maintenance would be standard process
2) After one year what ever maintenance is taken place which is reported to client (Ice cream mfg. co.) then client sends technician to distributor location. He carries maintenance & charged for the same. Which may include some material cost or spares cost.
Service and Maintenance would be standard process. You may also execute a Service contract between you and Distributor for servicing and maintenance
Babu

Updating and deleting Partner functions for functional location

Hi ,
I am having a requirement of updating and deleting partner function for functional location .
If anyone can suggest some BAPI or function module for same .
Thanks n Regards
Manik

Hi Fritz,
Thank you for your response,
My need is to create a PARTNERS for the FUNCTIONAL LOCATION.
LET ME DESCRIBE IT.
WHEN I AM CREATING A FUNCTION LOCATION USING IL01, AS I ENTER A FUNCTIONAL LOCATION AND PRESS ENTER IN THE NEXT SCREEN.
AND
I NEED TO ENTER THE PARTNERS FROM THE DROP DROWN MENU GOTO ->PARTNERS
WHICH TAKES ME TO THE NEXT SCREEN WHERE I NEED TO FILL THE INFORMATION IN THE TWO FIELDS : FUNCT & PARTNER.
I need a partner for the functional location that i mentioned above.and i need to upload that information in through Emigall.
So my query was that can we customize that partner for this functional location and if yes, what should the constraints,
what are steps required? Do we require a custom service module?
Regards,
Robert.

Equipment list in a functional location

Hi,
My scenario is as follow:
I have a functional location with a equipment list. I have to create a maintenance plan that affects to all the equipments.
All the equipments have to be controlled with the same parameters.
How can I act?
Could I create an unique maintenance plan to the functional location or could I have to create a maintenance plan for ech equipment?
How can I check that all the equipments are controlled?
Best regards

hi
it depends on your requirement only for example if you cost analysis is based on FL only ,then create one maintenance plan for that FL and attach the equipments in the object list ,hence once the call object is generated you can see the list of the equipment for maintenance activities,the cost incurred will be reflected to the FL
OR other thing is if all the equipments are to be maintained at regular interval with same parameter then create a maintenance plan with several maintenance item,in which system will create a call object for each maintenance item,drawaback is if you change any parameter ,then it will affect all the maintenance item attached to it
simple one is create maintenance plan for each equipment
regards
thyagarajan

Listing of Functional Locations in a Heirarchical Order in PM module

Hi Gurus ,
                 I am working on a requirement to display the Functional Locations in a heirarchical order for a given input Functional Location from table IFLOT. This is to be done by selecting all functional locations with the same String Indicator and the next lower heirarchy level for a given functional location.
    The above procedure is to be done upto 2 levels.
For eg .
Input given: AA (Functional location with heirarchy XX-NN-XX)
Then , my report should display
Level 2      Level 3
AA-22       AA-22-BB
Kindly provide me some useful tips .
Regards,
Venkatesh.

Hi,
When you are fetching the data from IFLOT
first table TNAPR field.
For each TNAPR you have to check Superior FL(TPLMA) field repeatedly till all the below levels have been fetched.
So the IFLOT select should be in a loop pass.
After fetching all the Levels of Values for FL, then you can put them in a string by concatenating as per your requirement and display.
Regards,
Anji

What is the use of ABC indicator in functional location segment.

Hi Expert,
I want to know about ABC indicator in functional location segement actually, what is the use of indicators in master data?
Regards,
Ram Rathode

Hi,
As per Application help, ABC indicator signifies:
An indicator that is assigned by the procedure of ABC analysis.
The following ABC indicators are possible:
A - Important
B - Less important
C - Relatively unimportant
According to these criteria, "A" materials are those materials that are of greatest importance for the production operations of a company.
Examples of use for ABC indicators are vendor master records, material master records, and master records of technical objects.
You can customize the values in ABC indicator as per your requirement
Thanks

Functional location Task lists Header/Operation Mass Upload

Hello experts,
I am using LSMW to upload Functional location Task lists Header & Operations in T-code IA12, for this i am using the Standard program IBIP (Object -> 480).
All required fields are in the standard structures apart from Operation QM Data, Recording view -> ERFSICHT & Inspection point Completion -> QPPKTABS (see attached screen shot).
Should i upload these 2 fields in different way ?
Thank you by advance.
Regards,
Soufiane

Generally, for all kinds of task list (Maintenance, Quality as well as Production), I tend to use BDC programs by which all the fields can be addressed. In standard, there are certain fields which might have got avoided for certain reasons.
So, I suggest you to look for some other options available.

Replication of functional location and equipment from ECC to CRM.

Hi Guys
I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.

As of SAP CRM 7.0 you can replicate functional locations from SAP ERP to SAP CRM. This function is supported as of SAP enhancement package 4 for SAP ERP 6.0.
In SAP CRM, functional locations are represented as object components of an installed base. The structure of functional locations is also replicated, and reflected in the installed base structure. If you replicate functional locations and pieces of equipment, the assignment of equipment to functional locations is also reflected in the installed base structure. The following replication processes are available:
- Initial download of functional locations from SAP ERP to SAP CRM in R3AS tcode.
Bye,
sekhar.

Requirement of functional location

Similar Messages

Maybe you are looking for