General settings for full hd 1080 cam

hey,
I have full hd 1080 cam avchd, and I don't know wich correct settings I need 2 use!!??
firtst of all: dv or hdv= I think hdv
second: avchd
I really don't know it any more and it's starting to get me ennoying

so my settings, i used hdv
1080 50i anamorphic
then my mts-clip export
format dvpal
preset dv pal widescreen
but underneath that i see
output:720x576!!!
source 1920x1080
video codec dv pal
then export.
but when i import this file again i see in the right screen that my clip is to small??!!
Vinnie

Similar Messages

  • How to set the same General settings for all users

    Hi Experts,
    How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
    Regards,
    Arti.

    Hi Arti!
    You can default user settings in a PFCG role, in the "personalization" tab.
    If you have a PFCG role that is common to all your users, you can set the default values here.
    However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
    Matthias

  • Whats the best settings for exporting a three camera youtube video on a mac book pro

    I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

    chucknoris501
    What version of Premiere Elements are you using on Mac?
    Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
    See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
    If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
    hard drive for upload to YouTube at the YouTube web site.
    ATR

  • General Settings for Material Management

    Hi,
    under Material Management in SPRO under General Settings for Materials Management
    1. Set material block for goods movements Lock Exclusively and (ii) Late lock
    2. Set Up Material Block for Invoice Verification
    Set Up Material Block for Invoice Verification
    (ii) Set Up Material Block for Invoice Verification
    (iii) Set Up Material Block for Invoice Verification
    Pls tell me which option i should select in which case?

    Hi,
    Each option have some time advantage on the other one, when the subject material is blocked for other users, preventing them from carrying out any IM postings.
    For goods movement process, Exclusive block will hold the item code for longer time than Late block.
    It is better to go with the stadard settings of 'Exclusive block' for Goods movement and 'blocked at first read' for invoice verification.
    Jeeva.

  • HT1222 i am not getting the software update tag in the general settings for my iphone, how to update my software then??

    I am not getting the "software update" tag in the general settings for my iphone, how do I update my iphone 4 software then????

    How to update your iPhone, iPad, or iPod touch

  • IPad 2, general settings for "WiFi" is greyed out, "No WiFi"

    Wishing assistance...iPad 2 general settings for WiFi is greyed outsaying "No WiFi"
    AirPort Express is working.
    I have triedf the following steps and attempted to enable Wi-Fi after each one.
    Verified that Airplane Mode is turned off.
    I'm running the latest version of iOS.
    I have Reset Network Settings more than several times, along with complete restore several times in iTunes.
    Suggestions?... thanks...

    Thank you for the suggestion, Carolyn...
    I tried the actions listed in the link. The iPad 2 WiFi is still greyed out, with No Wifi.
    I beginning to think this may be a hardware problem.

  • Settings for port forwarding IP cameras

    I am trying to configure Airport Extreme to set them up for Port Forwarding. As I have found many times, the directions are set up for routers on PC's, not on Macs... I have accessed Port Forwarding before for other cameras, and tried to do it the same way as before, but when I click on UPDATE to update the Airport Express, and then check on the settings I made for the camera, the settings are missing...I am not sure if there is one set of Port numbers I should be using but am not... Also, on the very first heading of a port forwarding window, there are apparently several default set ups, Remote access, Mail etc.. but none for IP cameras.. wondering if there is one set up I should use in this heading. Thanks for any help or advice....
    Geoff

    the program that came with the camera found the IP address for the camera but lists a web address for my LAN, not a WAN...ie http://10.0.1.34/   how do I either find out what IP address the DHCP gave the camera
    The 10.0.1.34 IP address is the one assigned by the DHCP server in your AirPort Extreme router.
    how do I either find out what IP address the DHCP gave the camera, if it did, or assign one to the camera so that its accessible from outside my LAN? like an IP address of 198. etc...
    Typically, you will want to assign a static Private IP address for your IP camera. You can then port map to this static address when attempting to access the camera from the Internet. In this case you will want to use the DHCP Reservations feature that is located on the DHCP tab within the AirPort Utility.
    Accessing the camera from the Internet would require the public WAN-side IP address of your router. This address is provided to you from your ISP. So for example, if your camera is accessable from a web browser, you would enter http://<your WAN-side IP address>:80 in the browser when you are at a remote location.

  • Best settings for Point Grey Flea camera

    Hi
    Can anyone using Point Grey Camera(Flea) find out the best settings(Hue, White Balance U, White balance V, Saturation....) for best image quality.
    Regards
    Abhishek Verma

    chucknoris501
    What version of Premiere Elements are you using on Mac?
    Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
    See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
    If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
    hard drive for upload to YouTube at the YouTube web site.
    ATR

  • Correct PPro CS3 Project Settings for Neoscene/Cineform 1080 60i .avi files?

    I am looking for clarification on the correct Premiere CS3 project settings for AVCHD 1080 60i NTSC files converted with Neo Scene with the "maintain source frame format" option.
    Should the PPro project settings for "Field" be upper or lower field first?
    On a Cineform discussion board I was told all interlaced HD footage is upper field first.
    However, I have found that a PPro project setting of upper field first results in much more sluggish playback than lower field first.
    So seems there is additional processing needed with the upper field first project setting and this suggests to me that lower field first is the proper setting.
    Any thoughts from NeoScene/Cineform users out there?
    Thanks!
    The project settings I have been using are:
    Editing Mode: Desktop
    Timebase: 29.97
    Frame size: 1920 x 1080
    Pixel Aspect Ratio: Square Pixels (1.0)
    Fields: Lower Field First
    Audio: 48000

    ...is not so good - bad colours. In Microsoft DV Avi-DV Pal compression. D1/DV PAL Wide is pixelate. I have click the de-interlace so it is not because of that. I have no problem to use encore it the file i send is compressed in those settings i mention before. I have no problems in compressing the file with those settings at all, like i have when i want to transfor the video in avi uncompressed.
    Oaaa...i am going crazy here. I have had so many problems with this and if i end up working this documentary and not beeing able to export it i go mad!...this if i do not go there before because of this problems...

  • Correct FCE export settings for full HD on XBOX 360?

    Hey everyone! Help!!!
    I just bought an excellent Sony HDR-XR500V camera, which has a large sensor and shoots at a marvelous full 1080 resolution. Directly from my camera into the Bravia TV, it looks amazing.
    I want to be able to watch the video file through my Xbox 360, but have no idea what export settings to use in FCE. I've been experimenting with Mpeg4 settings, but am fuzzy on the kbps.... I think my camera is capable of shooting 6.2 mbps... so what should I put?
    I also thought of just exporting to Quicktime Movie and then converting to WMV on my PC, but Quicktime on my PC is unable to play the Quicktime Exported Movie that FCE produced. Does that make sense? I don't see a way to convert it.
    Anyway, any thoughts would be helpful!
    Thanks!
    Marcus

    The Easy Setup should always match the format of the footage you shot, as should the Sequence setting. The Canon shoots HDV, so [you need to read this first|http://documentation.apple.com/en/finalcutpro/professionalformatsandworkf lows/#chapter=2%26section=0].
    With the correct settings make the best quality master file that the material will allow. This file can then be used for a variety of delivery formats, should you choose to show it in places other than on the web.
    To make your web video, use a H264 web preset in Compressor. If you need to deliver a Flash file for the web, rename the H264 movie's file extension to .flv -in most cases it will work fine.

  • Export settings for full HD

    Hi Guys. I've edited my AVCHD video shot with Panasonic TM300 at full quality 1920 resolution. I used the AIC1920x1080i50 Easy setup to transfer. Now I want to export in full HD to my Playstation 3. What settings do I use? I assume I have to use Quicktime Conversion but what settings? I have tried MP4 H264 18000kbs 1920 x 1080. 30 fps Keyframe automatic. I don't think the quality is that good for HD so does anyone use full hd settings successfully? Is anyone exporting to PS3?

    Hi Guys. I've edited my AVCHD video shot with Panasonic TM300 at full quality 1920 resolution. I used the AIC1920x1080i50 Easy setup to transfer. Now I want to export in full HD to my Playstation 3. What settings do I use? I assume I have to use Quicktime Conversion but what settings? I have tried MP4 H264 18000kbs 1920 x 1080. 30 fps Keyframe automatic. I don't think the quality is that good for HD so does anyone use full hd settings successfully? Is anyone exporting to PS3?

  • Final cut  pro settings for h.264 1080/50i

    Hi to all,
    can someone explain me how I have to set final cut 7 to use h.264 1080/50i videos (samsung-hmx-q10bp camera)?
    I have some problem to see playback (every time i have to render video and audio) and rendering is very very slow.
    tks a lot

    download and install  MPEG Streamclip for Mac:
    MPEG Streamclip

  • Settings for full HD

    I did a short film in full HD (1920 x 1080) and want to know what are the best settings in Premiere Pro CS3 (when creating the project and when exporting) so I don't lose the quality. Whatever, the final media will be web.

    Thanks Ann!
    What about CS4? Cause I'm still using Windows XP Pro and this is the latest version accepted by this operating system...

  • Correct project settings for Brinno time lapse cameras?

    Hi,
    I am totally new to all this so please forgive if an obvious answer.  I have been doing a building project time lapse using some time lapse cameras by Brinno. They are the TLC200's (http://www.brinno.com/html/TLC200.html). I am about to start a new project to put together the final timelapse but have no idea what type project settings to start it as. They claim to record in 1280x720 HD and output a raw avi file of the time lapse sequence after filming (each frame i think is captured as jpeg). You pre set the number of frames it takes (eg 1 every 30 minutes like I have) and what frame rate it puts the sequence of individuale captures together and outputs to the avi file (I choose 10 fps). That is all the informatoin I have. Any ideas?
    Many thanks
    [I though I would also mention it is ultimately going to be around a 1min30s - 2 min video at the end to be posted on youtube.]

    First, you need to find out exactly what is inside your file
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen
    shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/
    Also... if your "raw avi file" uses the H.264 codec... it will not work
    http://forums.adobe.com/thread/854115
    Also... you mention jpeg... which may or may not work
    MJPEG http://forums.adobe.com/thread/730396

  • Final Cut settings for JVC GZ-HD7AH Camera

    I have connected the camera via the DV socket to the computer firewire 800 and the software does not find the camera. What am i doing wrong.

    FireWire capture is primarily for tape-based media. Sounds like this is standard definition video. You probably need to use MPEG Streamclip to convert this to QuickTme as Final Cut doesn't work with this media. For higher quality throughout your workflow I'd suggest converting it to ProRes LT.
    Or DVCPRO 50.
    Message was edited by: Tom Wolsky

Maybe you are looking for