Generate XML report using MAX Generate report.vi

Hi All,
Caught in simple and wierd problem. I'm using a simle VI called MAX Generate Reoprt.vi to generate an XML report but getting error
Error code -2147220553
Error description :Incorrect report file extension provided.
The image of the block diagram is attached. I'm able to generate HTML reoport from MAX(absolutely no probs).
Thanks in advance
Regards
VDC
Attachments:
Error_in_MAX.JPG ‏7 KB

You must have the correct file extention. Here's what is wirtten in the detailed help of the function:
output filename specifies the filename of the generated report.
You must have the correct extension for the type of report to generate (.xml, .htm, .html, or .zip).
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Similar Messages

Error while printing generated XML doc using DBMS_OUTPUT

while generating XML document using XDK for PL/SQL i am getting " ORU-10027: buffer overflow, limit of 1000000 bytes " error even though i had set DBMS_OUTPUT to 1000000.
Is there any way to getrid of this problem .
i am using this code ..
CREATE OR REPLACE procedure SQLToXML1 is
queryCtx DBMS_XMLquery.ctxType;
result CLOB;
begin
DBMS_OUTPUT.ENABLE (1000000);
queryCtx := DBMS_XMLQuery.newContext ('select * from depolib_library' )
result := DBMS_XMLQuery.getXML(queryCtx);
printClobOut(result);
DBMS_XMLQuery.closeContext(queryCtx);
exception
when others then
dbms_output.put_line(sqlerrm);
end;
urgent help is needed
Thanks
null

No, It is a PO Print only. Only for changes to PO that do not affect the value of the PO,this error occurs. When i select the entry for the PO and click on Output message, the output message fails. On clicking Display Message, it shows the message - No schedules exist for the Scheduling Agreement XXXXXX(the PO number".
So,it is not for Scheduling Agreements but for PO only. I know it is weird to see such an error on the PO output message in ME9F.
Pls help.

Creating Union Report using 3 different reports in OBIEE 11.1.1.5.0

Hi Gurus,
This is my first time where I am creating a union report, I have a urgent requirement to create a union report using 3 different reports and it has 3 common dimension columns and each report has 3 measures and a measure label, and 1st report measures has to show $ amounts with column names ,2nd report measures has to show % with column names and 3rd units with column names, the result should be in pivot with all columns and measures ,can someone please help me with steps to approach,I am really confusing with the results when i tried, I really appreciate your inputs.
Thanks
KP

Addendum: I've tried it with CSV instead of XLS. Again, the repository appears to work just fine, but in Answers I get this message, similar to the Excel error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 16001] ODBC error state: IM006 code: 0 message: [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed. [nQSError: 16001] ODBC error state: S1009 code: -1023 message: [Microsoft][ODBC Text Driver] '(unknown)' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.. (HY000)

FAQ: Please submit all crash reports using Adobe Crash Reporter (Mac)

It's extremely important that if you encounter a crash to submit all crash reports using Adobe Crash Reporter on Macintosh and include the following information:
Please provide a detailed description. If you can consistently reproduce the problem with specific steps, submit those steps (see related article on writing a quality bug report) . Even if you don’t know the exact steps to consistently reproduce the problem, try to provide as much detail as you can about what you were doing when the problem occurred: What operations were you performing when the problem occurred and just before the error occurred? What type of document were you using? Did you recently use any plug-ins? If the problem is specific to a particular file, feel free to post the file via Dropbox, YouSendIt, or some other free file sharing service and include a link to the file in the problem description. If you have problems transferring the file or have a sensitive file, please contact the beta coordinators to make arrangements.
Please include your email address. Someone from the product may want contact you to gather more information from you.
Please note: Crash reports are only helpful if they're submitted using Adobe Crash Reporter. Sending crash reports using OS X's crash reporting infrastructure does not go to the Photoshop engineering team.
Please read the following articles for additional details:
Submitting Crash Reports
How to Write a Quality Bug Report
Thanks,
The Photoshop Development Team

Hi Gary,
First, thank you for submitting the crashes. And if you run into this again, on the about:support page you can click "submit crashes [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] "
Copying and pasting the crash reports with bp in front of them will allow troubleshooters in the thread to take a look. Or pasting the bp-xxxxx.... in this search [https://crash-stats.mozilla.com/home/products/Firefox] will show you the report. It may also show a bug in the bug section if it is currently being worked on.

How to Custom Report using sql server report builder for SCCM 2012 SP1

Hi ,
I am new to database, if i want to create a manual report using sql server report builder for SCCM 2012 SP1, what step should i take.
i want to create a report in which computer name, total disk space, physical disk serial no come together. i already added class (physical disk serial no.) in hardware inventory classes. refer snapshot

Hi,
Here is a guide on how to create custom reports in Configuration Manager 2012, it is a great place to start, change to the data you want to display instead.
http://sccmgeekdiary.wordpress.com/2012/10/29/sccm-2012-reporting-for-dummies-creating-your-own-ssrs-reports/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Easiest and/or best methods for generating XML output (not with a report)

Hi, several of our EBS customers (11.5.10) are converting their PDF reports to use XML/BI publisher to produce output. The data stream comes from a report that generates the XML output, and then the XML template is applied. This works great ... no problems, etc. From what I have read, however, Oracle intends to treat the traditional Forms and Reports Developers as legacy tools (although still supporting them, of course).
My question is if I wanted to ditch using Reports to generate XML output, what, in your opinion or in your current usage, is the easiest way of getting this data? In Reports, the data modeler is excellent in providing a method to write your queries, split them into different repeating groups, write formula and summary columns, link multiple queries, etc, etc. If one were to become Reports Developer free, what comparable tools are available to take its place? I would expect this tool to handle a mix of GUI and coding like the Reports data modeler. Please note that I'm not looking for an EBS-specific solution -- say for a custom application using regular Oracle 10g DB and iAS, with BI Publisher for reporting.
Thanks for your feedback,
Ryan

What I'm looking for is to not use Oracle Reports to generate the XML data output since Oracle's statement of direction is pushing BI Publisher rather than Oracle Reports as the preferred tool for reporting. That said, the data modeler in Reports provides a very flexible tool to construct and link multiple queries and to manipulate the queries into several levels of a master/detail relationship. Further, the mix of GUI and coding makes setting up the data model a lot more efficient. What I'm looking for (and I don't know if anything exists) is something comparable that can be used to generate XML output from the DB -- the idea being that I wouldn't use legacy tools, like Reports, for this task. I hope that is clearer.
Really, another way of answering my question is, aside from Reports and the APIs mentioned so far, what are my fellow developers using, if anything, to extract XML data in a way that handles the features i list above?

Generate XML output using DBMS_XMLGEN.getxmltype and not from rdf

Hi,
I have a requirement to display output from a particular table in XL format. Out of all the known possible options, I am planning to use the XML publisher to generate XL output.
For the data source, instead of using the conventional way of creating XML data using rdf,I am planning to use DBMS_XMLGEN.getxmltype pl/sql procedure to generate the XML output. And from the output, call the template to generate the required Excel output.
Now, I am using the following code to generate XML output but am not sure how to proceed from here. I need to first print the XML data in the FND Output file after which I was planning to call the 'XML Report Publisher' (XDOREPPB) program and use the current request id to get the excel output but I am not able to find the way to print the XML data in the output file as:
fnd_file.put_line (fnd_file.output, l_xml_type); - is throwing an error as l_xml_type is an XML data output.
PROCEDURE xml_main (
errbuf OUT VARCHAR2
,retcode OUT VARCHAR2
,p_project_from IN VARCHAR2
,p_project_to IN VARCHAR2
AS
l_xml_type XMLTYPE;
BEGIN
SELECT DBMS_XMLGEN.getxmltype
('SELECT fnd_global.conc_request_id
,TO_CHAR (segment1)
,to_char(start_date,''MM/DD/RRRR'')
,to_char(xxmcc_project_details_pkg.current_profit_projection
(project_id),''999,999,990.90'')
,to_char(xxmcc_project_details_pkg.cost_to_date (project_id),''999,999,990.90'')
,''1''
FROM pa_projects_all
WHERE segment1 BETWEEN NVL (p_project_from, segment1)
AND NVL (p_project_to, segment1)')
INTO l_xml_type
FROM DUAL;
fnd_file.put_line (fnd_file.output, l_xml_type);
END xml_main;
Can anyone point me as to how to publish XML output using a PL/SQL procedure (DBMS_XMLGEN.getxmltype)
Thanks.

Pl see if the example included in this presentation helps http://www.oracle.com/technology/products/applications/Events/OOW-2006/EBS/S281401_Sridhar_Bogelli.pdf
Also, you do not need to explicitly call XDOREPPB in later versions of XML Publisher. If you set up everything correctly (as described in the presentation above and the link below) the Output Post Processor is called automatically after the XML file is generated successfully.
Another excellent tutorial is at http://www.oracle.com/technology/obe/fusion_middleware/fusion/bi/xmlp_ebiz/index.html
HTH
Srini

How do I generate XML File Using JDeveloper 9.0.3

Hi All
I want to generate a XML file against the data in one of my Oracle table,,,, This is the first time I am doing this Task, so please let me know whether I am going through the correct path, or if not appreciate if you could put me to the correct system of doing this please��..
OK , Well I am working to a publishing company in Australia and we have Oracle 8i (Release 3 ) database and I have Oracle JDeveloper (9.0.3 -Preview ) version in my personal computer.
I have a Table(ONIXT4) with three Columns( ISBN,Author,Price) in Oracle as follows:
ISBN     Author     Price
2512456321     Peter     14.50
7445854127     Ray      21.75
What I want to generate a XML File using JDeveloper as below with respect to data in above Table.
<ISBN>2512456321</ISBN>
<ProductInfor>
<Author>Peter</Author>
<Price>14.50</Price>
</ProductInfor>
<ISBN>7445854127</ISBN>
<ProductInfor>
<Author> Ray </Author>
<Price>21.75</Price>
</ProductInfor>
I created the database connection within JDeveloper to Oracle those working fine,, my major problem is,, the Tag <ProductInfor>, since this is not a Column Name of the Table I don't know how should I incorporate this with the file.
What I did so far with the JDeveloper:
1.Create the Workspace and the Project
2.File -- New -- XML -- XSQL
3.Then I Selected Query from the Component Palette,, Property Values were NOT changed, and gave 'Select * from ONIXT4'
Whole Untitled3.xsql file look likes below
<?xml version = '1.0' encoding = 'windows-1252'?>

<page xmlns:xsql="urn:oracle-xsql" connection="Connection1">
<xsql:query max-rows="-1" null-indicator="no" tag-case="lower">
Select * From OnixT4
</xsql:query>
</page>
Then the Result comes as:
<?xml version="1.0" encoding="windows-1252" ?>
- 
- <page>
- <rowset>
- <row num="1">
<isbn>2512456321</isbn>
<author>Peter</author>
<price>14.5</price>
</row>
- <row num="2">
<isbn>7445854127</isbn>
<author>Ray</author>
<price>21.75</price>
</row>
</rowset>
</page>
How do I format the outcome to obtain the my requirement??
Welcome all comments of donig this ....

To format your XML to the requiered output you'll use a stylesheet and XSLT
As it says in your output:
- 
A nice tutorial on XSLT is available on the XML technology center in OTN:
See Transforming XML with XSLT
http://otn.oracle.com/tech/xml/learner.html

Generating XML Payload using outbound interface

Hi Members ,
I have a requirement which is not that clear or details of which are not exactly known.But I just know that I have to outbound some accounting information basically GL Account segment values .Thing is I have done some interfaces before but was using UTL_FILE to have delimiter files. Please let me know how to generate XML file in our case?
Is it something I can leverage in R12 the XML Gateway ??
Appreciate help.
Thanks
Narayana

1) First you have yo create map using message designer(map between DTD and DataBase). Please refer user guide for more details.
2) Load Map
3) use ecx_oubound.getxml for generating an xml with the map code given

How to? regarding adding xml parent tag in generated xml script using C# scripting

Hi All,
I have a set of transformations, which will generate xml data by reading rows from database
here is my data flow https://social.msdn.microsoft.com/Forums/getfile/606619
<Customer>
<CustomerId>1</CustomerId>
<Name></Name>
<Title></Title>
<Phone>1 (11) 500 555-0162</Phone>
<Gender>F</Gender>
<MaritalStatus>S</MaritalStatus>
<YearlyIncome>70000</YearlyIncome>
<BirthDate>15-02-1968 12:00:00</BirthDate>
<EmailAddress>[email protected]</EmailAddress>
<CustomerKey>11003</CustomerKey>
</Customer>
<Customer>
<CustomerId>2</CustomerId>
<Name></Name>
<Title></Title>
<Phone>1 (11) 500 555-0131</Phone>
<Gender>F</Gender>
<MaritalStatus>S</MaritalStatus>
<YearlyIncome>80000</YearlyIncome>
<BirthDate>08-08-1968 12:00:00</BirthDate>
<EmailAddress>[email protected]</EmailAddress>
<CustomerKey>11004</CustomerKey>
</Customer>
my problem is I am not able to add <?xml version="1.0" encoding="UTF-8"?> (xml tag) to output folder, which should be just at the beginning of xml file.
I am a beginner in SSIS, any help/hints will be appreciated.
Regards,
Mateen

Why not do it in t-sql?
http://visakhm.blogspot.in/2014/05/t-sql-tips-fun-with-for-xml-path.html
http://visakhm.blogspot.in/2013/12/generating-nested-xml-structures-with.html
If you want to do it in SSIS use this
http://bicortex.com/how-to-create-an-xml-file-using-ssis-and-ms-sql-server/
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to generate XML file using select files manually option in MOPz

Hi Guru's!
Can someone tell me how can I generate XML file not using the calculate automatically option but using select files manually. thanks!

Hi Maix,
You may manually add the files into download basket and then approve it.
Use the SCN document below for the steps.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10b14f0c-b9af-2e10-ba83-f05ebcfbc3c2?QuickLink=index&…
Hope this helps.
Regards,
Deepak Kori

Error in Report Using XMLP without report builder

Hi,
Recently I came to know about the building the report using the XMLPublisher instead of Report Builder.
So i tried it But ended with error Please help me where I went wrong.
I have Created the Concurrent program with the Executable Type as 'XDODTEXE' and of Output type as 'XML'.
And
I have define the data definitions and uploaded XML file in Data template.
The XML file has the below,
"<?xml version = '1.0' encoding = 'UTF-8'?>
<dataTemplate name="Invoice" description="This report gives the invoice details" version="1.0">
<parameters>
<parameter name = "P_INVOICE_ID" dataType = "NUMBER" defaultValue=""/>
</parameters>
<dataQuery>
<sqlStatement name="Q_Invoice">
<![CDATA[
              select ai.Invoice_id invoice_id
             ,ai.Invoice_amount invoice_amount
             ,ai.vendor_id vendor_id
             ,ai.amount_paid amount_paid
          ,ai.invoice_date invoice_date
          ,ail.line_number line_number
          ,aid.distribution_line_number distribution_line_number
from ap_invoices_all ai, ap_invoice_lines_all ail,ap_invoice_distributions_all aid
where ai.invoice_id = ail.invoice_id
and ai.org_id = ail.org_id
and ail.line_number = aid.invoice_line_number
and aid.invoice_id = ail.invoice_id
and ai.invoice_id = nvl(:P_INVOICE_ID,ai.invoice_id);
     ]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_Invoice" source="Q_Invoice">
<element name="invoice_id" value="invoice_id"/>
<element name="invoice_amount" value="invoice_amount"/>
<element name="vendor_id" value="vendor_id"/>
<element name="amount_paid" value="amount_paid"/>
<element name="invoice_date" value="invoice_date"/>
<element name="line_number" value="line_number"/>
<element name="distribution_line_number" value="distribution_line_number"/>
</group>
</dataStructure>
</dataTemplate>
When I ran the report The ended up with the following Error,
"TEST_INVOICE_DETAILS module: Test_invoice_details
+---------------------------------------------------------------------------+
Current system time is 18-APR-2013 18:17:37
+---------------------------------------------------------------------------+
XDO Data Engine Version No: 5.6.3
Resp: 20707
Org ID : 5186
Request ID: 9102277
All Parameters: P_INVOICE_ID=145072
Data Template Code: TEST_INVOICE_DETAILS
Data Template Application Short Name: PO
Debug Flag: N
{P_INVOICE_ID=145072}
Calling XDO Data Engine...
--SQLException
java.sql.SQLSyntaxErrorException: ORA-00911: invalid character
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:205)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:861)
     at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1145)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1267)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3493)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1491)
     at oracle.apps.xdo.dataengine.XMLPGEN.processQuery(XMLPGEN.java:1947)
     at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:501)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:308)
     at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:273)
     at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:215)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:254)
     at oracle.apps.xdo.dataengine.DataProcessor.processDataStructre(DataProcessor.java:390)
     at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:355)
     at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:334)
     at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:294)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
103
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 18-APR-2013 18:17:43
+---------------------------------------------------------------------------+
I know I made you tried to read such a big thing. Since I want to make you clear So I did.
Thanks in advance.
Regards
Uva.
Edited by: Uva on Apr 18, 2013 6:54 AM

check result of
>
select ai.Invoice_id invoice_id
,ai.Invoice_amount invoice_amount
,ai.vendor_id vendor_id
,ai.amount_paid amount_paid
,ai.invoice_date invoice_date
,ail.line_number line_number
,aid.distribution_line_number distribution_line_number
from ap_invoices_all ai, ap_invoice_lines_all ail,ap_invoice_distributions_all aid
where ai.invoice_id = ail.invoice_id
and ai.org_id = ail.org_id
and ail.line_number = aid.invoice_line_number
and aid.invoice_id = ail.invoice_id
and ai.invoice_id = nvl(:P_INVOICE_ID,ai.invoice_id);
>
is there any spec symbol like < > ...
?

Generate XML with tag names generated dynamically.

Hi Mark,
I want to generate xml in the following way using SQLXoperators.
But only problem is when i use the operator, the tag name should be supplied before in hand as parameter.
So it works well when the data for the tags are stored in seperate columns then its pretty simple.
But lets say the whole hierarchy of the nodes is stored in one table with ID-->PARENTID relationship and the text is stored in a column called description.
Now using CONNECT BY PRIOR i get the hierarchy and now based on the description value i have to generate the tags and then fill in the other details.
This is just a summary of what i want. the below sample has much more than that and actual data comes from more than one table.
But if i get the solution for what i asked before i think i can build the test of the thing.
<?xml version="1.0" encoding="UTF-8"?>
<SequenceData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="SequenceData.xsd">
     <Header>
          <TemplateName>Template(XML)</TemplateName>
          <TemplateVersion>1.1</TemplateVersion>
          <CreatedUser>rsh2kor</CreatedUser>
          <CreatedDate>17-06-2005 12.12.22</CreatedDate>
     </Header>
     <List>
          <LoadPoints>
               <LoadPoint description="Loadpoint1_in_list(level one)">
                    <SetPhase>
                         <SetPhaseVariables>
                              <SetPhaseVariable>
                                   <Name>pRail</Name>
                                   <Unit>bar</Unit>
                                   <Value>100</Value>
                                   <SettlingTime>0.0</SettlingTime>
                              </SetPhaseVariable>
                         </SetPhaseVariables>
                         <MonitoredVariables>
                              <MonitoredVariable>
                                   <ID>12344<ID>
                                   <Name>MeasPoint</Name>
                                   <Unit>pascal</Unit>
                                   <Limit>10</Limit>
                                   <Tolerance>0.0</Tolerance>
                                   <Operator>></Operator>
                                   <AlertType>STOP</AlertType>
                              </MonitoredVariable>
                         </MonitoredVariables>
                    </SetPhase>
                    <WaitPhase>
                         <WaitingTime>10</WaitingTime>
                         <MonitoredVariables>
                              <MonitoredVariable>
                                   <Name>MeasPoint</Name>
                                   <Unit>pascal</Unit>
                                   <Limit>10</Limit>
                                   <Tolerance>0.0</Tolerance>
                                   <Operator>></Operator>
                                   <AlertType>STOP</AlertType>
                              </MonitoredVariable>
                         </MonitoredVariables>
                    </WaitPhase>
                    <MeasPhase>
                         <MeasPhaseVariables>
                              <MeasPhaseVariable>
                                   <Name>MeasPoint</Name>
                                   <Unit>pascal</Unit>
                                   <Result>0</Result>
                              </MeasPhaseVariable>
                         </MeasPhaseVariables>
                    </MeasPhase>
               </LoadPoint>
          </LoadPoints>
     </List>
     <Loop Iteration="5">
          <LoadPoints>
               <LoadPoint description="Loadpoint2_in_Loop">
                    <SetPhase>
                         <SetPhaseVariables>
                              <SetPhaseVariable LoopCount="1">
                                   <Name>pRail</Name>
                                   <Unit>bar</Unit>
                                   <Value>10</Value>
                                   <SettlingTime>0.0</SettlingTime>
                              </SetPhaseVariable>
                              <SetPhaseVariable LoopCount="2">
                                   <Name>pRail</Name>
                                   <Unit>bar</Unit>
                                   <Value>20</Value>
                                   <SettlingTime>0.0</SettlingTime>
                              </SetPhaseVariable>
                              <SetPhaseVariable LoopCount="3">
                                   <Name>pRail</Name>
                                   <Unit>bar</Unit>
                                   <Value>30</Value>
                                   <SettlingTime>0.0</SettlingTime>
                              </SetPhaseVariable>
                              <SetPhaseVariable LoopCount="4">
                                   <Name>pRail</Name>
                                   <Unit>bar</Unit>
                                   <Value>40</Value>
                                   <SettlingTime>0.0</SettlingTime>
                              </SetPhaseVariable>
                              <SetPhaseVariable LoopCount="5">
                                   <Name>pRail</Name>
                                   <Unit>bar</Unit>
                                   <Value>50</Value>
                                   <SettlingTime>0.0</SettlingTime>
                              </SetPhaseVariable>
                         </SetPhaseVariables>
                         <MonitoredVariables>
                              <MonitoredVariable>
                                   <Name>MeasPoint</Name>
                                   <Unit>pascal</Unit>
                                   <Limit>10</Limit>
                                   <Tolerance>0.0</Tolerance>
                                   <Operator>></Operator>
                                   <AlertType>STOP</AlertType>
                              </MonitoredVariable>
                         </MonitoredVariables>
                    </SetPhase>
                    <WaitPhase>
                         <WaitingTime>10</WaitingTime>
                         <MonitoredVariables>
                              <MonitoredVariable>
                                   <Name>MeasPoint</Name>
                                   <Unit>pascal</Unit>
                                   <Limit>10</Limit>
                                   <Tolerance>0.0</Tolerance>
                                   <Operator>></Operator>
                                   <AlertType>STOP</AlertType>
                              </MonitoredVariable>
                         </MonitoredVariables>
                    </WaitPhase>
                    <MeasPhase>
                         <MeasPhaseVariables>
                              <MeasPhaseVariable>
                                   <Name>MeasPoint</Name>
                                   <Unit>pascal</Unit>
                                   <Result>0</Result>
                              </MeasPhaseVariable>
                         </MeasPhaseVariables>
                    </MeasPhase>
               </LoadPoint>
          </LoadPoints>
          <List>
               <LoadPoints>
                    <LoadPoint description="Loadpoint3_in_list(level two)">
                         <MonitoredVariables/>
                         <SetPhase>
                              <SetPhaseVariables>
                                   <SetPhaseVariable>
                                        <Name>pRail</Name>
                                        <Unit>bar</Unit>
                                        <Value>100</Value>
                                        <SettlingTime>0.0</SettlingTime>
                                   </SetPhaseVariable>
                              </SetPhaseVariables>
                              <MonitoredVariables>
                                   <MonitoredVariable>
                                        <Name>MeasPoint</Name>
                                        <Unit>pascal</Unit>
                                        <Limit>10</Limit>
                                        <Tolerance>0.0</Tolerance>
                                        <Operator>></Operator>
                                        <AlertType>STOP</AlertType>
                                   </MonitoredVariable>
                              </MonitoredVariables>
                         </SetPhase>
                         <WaitPhase>
                              <WaitingTime>10</WaitingTime>
                              <MonitoredVariables>
                                   <MonitoredVariable>
                                        <Name>MeasPoint</Name>
                                        <Unit>pascal</Unit>
                                        <Limit>10</Limit>
                                        <Tolerance>0.0</Tolerance>
                                        <Operator>></Operator>
                                        <AlertType>STOP</AlertType>
                                   </MonitoredVariable>
                              </MonitoredVariables>
                         </WaitPhase>
                         <MeasPhase>
                              <MeasPhaseVariables>
                                   <MeasPhaseVariable>
                                        <Name>MeasPoint</Name>
                                        <Unit>pascal</Unit>
                                        <Result>0</Result>
                                   </MeasPhaseVariable>
                              </MeasPhaseVariables>
                         </MeasPhase>
                    </LoadPoint>
               </LoadPoints>
          </List>
     </Loop>
</SequenceData>
Pls help as soon as possible.
Thanks.

I'm not Mark, but check out this article it may be helpful.
http://www.oracle.com/technology/oramag/oracle/05-may/o35asktom.html
In 10g there are other SQL statements besides connect by prior for parent child relationships.
such as:
CONNECT_BY_ROOTâreturns the root of the hierarchy for the current row; this greatly simplifies our query. (See below for an example).
CONNECT_BY_ISLEAFâis a flag to tell you if the current row has child rows.
CONNECT_BY_ISCYCLEâis a flag to tell you if the current row is the beginning of an infinite loop in your hierarchy. For example, if A is the parent of B, B is the parent of C, and C is the parent of A, you would have an infinite loop. You can use this flag to see which row or rows are the beginning of an infinite loop in your data.
NOCYCLEâlets the CONNECT BY query recognize that an infinite loop is occurring and stop without error (instead of returning a CONNECT BY loop error).

How to generate .xsd file using jaxb generated java files

Hi,
We need to upgrade our applicatio to jdk1.6 which has jaxb2.0 class files in it. Our application has java files generated from .xsd using jaxb1.0.2 version. At present we dont have .xsd or .xml file with us.
We decide to generate .xsd file by using jaxb1.0.2 generated java files. I tried using schemagen.exe given by jdk1.6 to generate .xsd file. It error out. Is there any other way to generate .xsd file ?
pls let me know.
thanks,
Thiru

Object-XML mapping is a new feature in JAXB 2.0. Classes generated with JAXB 1.0 won't generate a schema.
Generate Java classes with JAXB 2.0 xjc.
http://www.theregister.co.uk/2006/09/22/jaxb2_guide/

How to create a single report using 5 difftent reports

Hi Experts
how to create a single report using 5 repors in it.
Example
I have to create a Survey history report using
Reports like Surevy 1
                  Surevy 2
                  Surevy 3
                  Surevy 4
                  Surevy 5
Please suggest me.
Santosh

Use Analysis Process Designer (RSANWB) to feed each of the survey BEX reports to one DSO. Assuming each of the surveys has something in common to compare. Could also be used as a snapshot storage for the surveys in case history needs to be compared/archived.
Build the Direct update DSO with the survey objects. Add needed time characteristics and/or version control objects to the key.
Data sources will be the 5 surveys.
Add formula to hardcode version/time for history.
Data target is the direct update DSO.
http://help.sap.com/saphelp_nw2004s/helpdata/EN/49/7e960481916448b20134d471d36a6b/frameset.htm
-SM

Generate XML report using MAX Generate report.vi

Similar Messages

Maybe you are looking for