Get stuck in Installation step due to language change in the OTN
Hi Friends
I am following the crystal train Instructions to setup Development Environment for BPEL
these are the steps given in that
Step1 : Oracle Database 10g Instructions
Step 2 : Repository Creation Utility
Step 3 : Oracle Weblogic Server 10.3.3
Step 4 : Oracle SOA Suite 11.1.1.2.0
Step 5 : Upgrade to Oracle SOA Suite 11.1.1.3.0
Step 6 : Domain Creation
Step 7 : Verification of Admin Server Installation
Step 8 : Verification of SOA Server Installation
Step 9 : Verification of BAM Server Installation
Step 10 : JDeveloper Installation
Step 11 : SOA Extension for JDeveloper Installation
Step 12 : Oracle Service Bus 11g Installation
Step 13 : Extension of Weblogic Domain With OSB
Step 14 : Verification of OSB Server Installation
Step 15 : SOAP UI
Step 16 : JMS Adapter
Step 17 : DB Adapter
Step 18 : BAM Adapter
I have completed until step 11
But in the
Step 12 : Oracle Service Bus 11g Installation
As per the document step
I want to download oracle service bus(11.1.1.3.0)
This will get downloaded as ofm_osb_generic_11.1.1.3.0_disk1_1of1.zip
But in my case i went to that link but i cannot find oracle service bus(11.1.1.3.0).so i put the requirement in the searh region ..but i find this software oracle service bus(11.1.1.3.0) In chinese and japanese language ... please help to get download this software and to complete my installation process
Thanks in Advance
Ur help ll be appriciable
Thiliban
Hi Friends
where ever i go i am getting pointed to download Oracle Service Bus 11g (11.1.1.4.0)
if i down load "Oracle Service Bus 11g (11.1.1.4.0)" ll it affects my installtion process because i have done every thing based on the document ...
more over i have installed This sofwware in my system
Repository Creation Utility (11.1.1.3.3)
Oracle Weblogic Server 10.3.3
Oracle SOA Suite 11.1.1.3.0
oracle Jdeveloper 11g(11.1.1.3.0)
If i install "Oracle Service Bus 11g (11.1.1.4.0)" ll it affect my process??? (or )ll It support the process??
I have downloded the "Oracle Service Bus 11g (11.1.1.4.0)" .when i try to install
it just asked for
Welcome=> next
step 2 install software update => i clicked skip software updates =>next
step3 installation location => i got
Oracle Middleware home => c:\Oracle \Middleware\
Oracle HOme Directory : Oracle_OSB1
when i click next=>i get error message
(INST-07286 :specified oracle Middleware home location does not have version 10.3.4.0 of weblogic server .if the version iscorrect then configuring with the weblogic server will fail)
so i tried this one
Oracle Middleware home => c:\Oracle \Middleware\wlserver_10.3
Oracle HOme Directory : Oracle_OSB1
=>next
I get INST -07248 specified middleware home location is not a valid location
PLEASE HELP ME I STRUGGLING A LOT TO INSTALL THIS SOFTWARE PLEASE
Thanks In advance
your help will be appreciable
Thiliban
Edited by: Newbie on Jan 31, 2011 4:29 AM
Similar Messages
-
i keep trying to update the software and it gets stuck on configuration, so i can i sped up the process?
Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US -
My spot healing tool gets stuck and freezes and won't keep up with the curser. I'm using LR4.
My spot healing tool gets stuck and freezes and won't keep up with the curser. I'm using LR4.
Remove the song in question from the sync list and see if the rectifies the problem.
If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected. -
when i run keynote in the play mode, some times the computer get stuck, why?, when i run key note in the play mode, some times the computer get stuck, why?
hello,
I had the same issue. This is what I was told to do.
iWork has to be removed completely to be effective when re-installing, you must use an application removal tool to do this or it wont remove every Keynote file.
Appcleaner will do this and its free.
The following procedure has helped solve many issues with Keynote:
1 Close Keynote then use Appcleaner
2 Empty the Trash
3 Shut down the Mac, then restart and press the shift key immediately after the startup sound, then release shift when the Apple logo appears
allow the Mac to boot up to the desktop, it will take longer then usual as the hard drive is being repaired
4 restart the Mac
5 Reinstall iWork
6 Repair permissions:
Applications > Utilities > Disk Utility > First Aid: click on your system disc in the drive column
and select Repair Disk Permissions
7 open Keynote and test -
Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
I keep getting emails stating that my password had been changed but the name attached to the message is not minr but it's my email address. Is someone using my email address to sign into FaceTime or other Apple Programs?
Of you're being phished. There are a lot of phishing scams going around right now with bad guys trying to get access to apple ID's.
Anytime you want to verify the info, do not click on any links in the mail, but open up iTUnes on your computer and check things out that way.
If you want to verify if anything is wrong http://www.apple.com/support/appleid/contact/
contact apple on your own and see what they say. -
Hi Gurus,
I have a scenario where an employee submits his trip expenses and a workflow gets triggered thenafter. The workflow should then send an email to his supervior for a review. The supervisor has no actions to perform here and he will only receive an email.
But the workflow gets stuck at that particular step meant for the email generation and the supervisor is not getting any emails(found from SWI1).
The step has a method used where an FM is called and 2 parameters(Emp ID & Trip No) are passed to it.
But due to some reason the fields are not poupulated with data.
There are no binding errors.
In fact we are using the object-key- parameters so that the data should be captured.
The FM while testing is generating emails as viewed from SCOT.
I have no idea of what more to check in this case.
Please help me. Its too urgent.
Regards,
Binay.What product are you using? Remember this forum is for Business Objects products, not SAP as such...
Ludek -
Eternity Long Syncing, Getting Stuck On Last Step
Okay, I have tried and tried to solve this problem on my own and I am just at a dead end here. One time I was happy with having music on my iPod Touch 5 until all of a sudden the music would not show up on there anymore. I'm sure a lot of people are experiencing the same thing, having their playlist come up gray-colored with that dotted circle next to it and having it say that it is in the storage in blue but not really on your iPod/iPhone. The real problem I see for me at least it that it does not quite finish the syncing process. It'll get stuck on "waiting for changes to be applied" and well one time last night i left my iPod on that step over night into 9am this morning and STILL on that last step. No music. This is the same for my iPhone 5s. Although at one point I was able to manually grab a song from my playlist and drag to my phone and it'll be on there but that stopped too. Any new songs I manually drag to the phone will show up in that grayed color, but the blue storage part on the bottom part accounts for it, but its not on the phone/pod. The only problem I can spot as of right now is that its not "completely" getting done with syncing. And yes I have tried many alternatives; I've uninstalled iTunes and reinstalled back in the proper way (in case this helps I do have a Windows 7 computer), I've rebooted my iPod 5 and iPhone 5s before syncing, I have un-check marked the "Sync Music" and re-checked it back (That also never gets done syncing, so I just cancel it), I even restored my iPod as new just to see if it'll get music on there and well it didn't work (I was thinking that something corrupted could have been on the iPod as well as in the back-up so I did that and no improvments. I didnt do this for my iPhone yet.), and yes this iTunes is authorized with this computer. I don't know what else to do, this could either be my iPod, the computer, iTunes (I have the 11.1.4) or the dock connector messed up. I just want that syncing to be finished!!! Can someone please help me out so I can listen to music on my iPod again. Thank you!
Also as additional information, it only shows the songs I've bought off of iTunes, rather than the ones I have on my computer. The majority of my playlist came from my computer and I have it in the "My Documents", I have 540 songs total.See this previous discussion:
Syncing stays on 'waiting for items to copy' with iOS 5 (Updated) -
Bootcamp gets stuck in installation
After creating a partition the bootcamp assistant restarts my mac and then it gets stuck in grey screen. After few minutes it makes the restating noise and keeps getting stuck in the same screen. If i force quit it, and try to load from windows disc it gets stuck again. It tried different internal hard drive, different windows 7 dvd ( happens to have 2 different versions) still the same.. Anyone knows a way around?
Let's reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
My phone isnt syncing- gets stuck backing up step 2
i am trying to sync my 4s phone but it seems to be stuck on step 2 backing up.
also have changed my apple id in itunes but if i try to buy an app on phone my old id shows up so password inactive> does anyone know how to update the id on phone?Delete the latest backup listed in iTunes/Edit/Preferences/Devices and try again to sync. If iTunes can't read the backup in order to replace it, the sync will stop at step two.
Log out of the Store in Settings/Store on your old phone, restart the device and log in with your new Apple ID. -
I would like to disable ssl 3 but need to test what sites only support ssl 3. I keep getting stuck with an error that is over my head. I've tried manipulating the string a dozen different ways and keep getting the same error. I am not familiar with -notin
or how to specify which part of the property its checking: thanks a ton
http://blog.whatsupduck.net/2014/10/checking-ssl-and-tls-versions-with-powershell.html
line with issues:
$ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name -notin @("Default","None") | %{$_.Name}
You must provide a value expression on the right-hand side of the '-' operator.
At S:\scripts\test23.ps1:50 char:126
+ $ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name - <<<< noti
n @("Default","None") | %{$_.Name}
+ CategoryInfo : ParserError: (:) [], ParseException
+ FullyQualifiedErrorId : ExpectedValueExpression
<#
.DESCRIPTION
Outputs the SSL protocols that the client is able to successfully use to connect to a server.
.NOTES
Copyright 2014 Chris Duck
http://blog.whatsupduck.net
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
.PARAMETER ComputerName
The name of the remote computer to connect to.
.PARAMETER Port
The remote port to connect to. The default is 443.
.EXAMPLE
Test-SslProtocols -ComputerName "www.google.com"
ComputerName : www.google.com
Port : 443
KeyLength : 2048
SignatureAlgorithm : rsa-sha1
Ssl2 : False
Ssl3 : True
Tls : True
Tls11 : True
Tls12 : True
#>
function Test-SslProtocols {
param(
[Parameter(Mandatory=$true,ValueFromPipelineByPropertyName=$true,ValueFromPipeline=$true)]
$ComputerName,
[Parameter(ValueFromPipelineByPropertyName=$true)]
[int]$Port = 443
begin {
$ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name -notin @("Default","None") | %{$_.Name}
process {
$ProtocolStatus = [Ordered]@{}
$ProtocolStatus.Add("ComputerName", $ComputerName)
$ProtocolStatus.Add("Port", $Port)
$ProtocolStatus.Add("KeyLength", $null)
$ProtocolStatus.Add("SignatureAlgorithm", $null)
$ProtocolNames | %{
$ProtocolName = $_
$Socket = New-Object System.Net.Sockets.Socket([System.Net.Sockets.SocketType]::Stream, [System.Net.Sockets.ProtocolType]::Tcp)
$Socket.Connect($ComputerName, $Port)
try {
$NetStream = New-Object System.Net.Sockets.NetworkStream($Socket, $true)
$SslStream = New-Object System.Net.Security.SslStream($NetStream, $true)
$SslStream.AuthenticateAsClient($ComputerName, $null, $ProtocolName, $false )
$RemoteCertificate = [System.Security.Cryptography.X509Certificates.X509Certificate2]$SslStream.RemoteCertificate
$ProtocolStatus["KeyLength"] = $RemoteCertificate.PublicKey.Key.KeySize
$ProtocolStatus["SignatureAlgorithm"] = $RemoteCertificate.PublicKey.Key.SignatureAlgorithm.Split("#")[1]
$ProtocolStatus.Add($ProtocolName, $true)
} catch {
$ProtocolStatus.Add($ProtocolName, $false)
} finally {
$SslStream.Close()
[PSCustomObject]$ProtocolStatus
Test-SslProtocols -ComputerName "www.google.com"V2 version:
function Test-SslProtocols {
param(
[Parameter(
Mandatory=$true,
ValueFromPipelineByPropertyName=$true,
ValueFromPipeline=$true
)]$ComputerName,
[Parameter(
ValueFromPipelineByPropertyName=$true
)][int]$Port = 443
begin {
$protocols=[enum]::GetNames([System.Security.Authentication.SslProtocols])|?{$_ -notmatch 'none|default'}
process {
foreach($protocol in $protocols){
$ProtocolStatus = @{
ComputerName=$ComputerName
Port=$Port
KeyLength=$null
SignatureAlgorithm=$null
Protocol=$protocol
Active=$false
$Socket = New-Object System.Net.Sockets.Socket('Internetwork','Stream', 'Tcp')
$Socket.Connect($ComputerName, $Port)
try {
$NetStream = New-Object System.Net.Sockets.NetworkStream($Socket, $true)
$SslStream = New-Object System.Net.Security.SslStream($NetStream, $true)
$SslStream.AuthenticateAsClient($ComputerName, $null, $protocol, $false )
$RemoteCertificate = [System.Security.Cryptography.X509Certificates.X509Certificate2]$SslStream.RemoteCertificate
$protocolstatus.Active=$true
$ProtocolStatus.KeyLength = $RemoteCertificate.PublicKey.Key.KeySize
$ProtocolStatus.SignatureAlgorithm = $RemoteCertificate.PublicKey.Key.SignatureAlgorithm.Split("#")[1]
catch {
Write-Host 'Failed'
finally {
New-Object PsObject -Property $ProtocolStatus
$SslStream.Close()
Test-SslProtocols -ComputerName www.google.com
¯\_(ツ)_/¯ -
The text language changed on the layout selections in pages.
I noticed there has been a language change on my pages text layout selections from English. Any ideas if/how this can be changed back to English.
HI Bev,
Are you referring to documents you have created, or to the placeholder text in some of Pages' supplied templates?
If the latter, be aware taht the placeholder text is in Latin, and is intendet to show what a block of text will look like in that template, without distracting your attention from the appearance by including any easily read meaning in that text.
Placeholder text disappears as soon as you begin typing in its contaner—replaced by the text you type.
Regards,
Barry -
Profiles get stuck on terminal servers due to Z@??.tmp files
Running 2003R2 patched to the latest everything, get user profiles that won't unload (we are using UHPClean) due to tmp files left in documents and settings\local settings\temp that start with Z@??.tmp. Been reading articles on inet, looks like they are from adobe - maybe font files, i followed all their recommendations - removed unnecessary plugins, tried running a logoff script to delete the tmp files - still no solution. the files are locked and can not be deleted, I have to reboot the terminal server and manually delete the files. If I don't reboot and manually delete the files the users keep getting new directory folders under users and computers - example first time user logs in c:\documents and settings\jsmith if he prints from outlook a pdf file it creates Z@??.tmp files that are locked. when he tries to get off the terminal server it hangs for awhile and then finally gives up on deleting the files. the next time the user signs onto the terminal server it sees a profile already out there so it creates another profile folder like jsmith.domain if they print a pdf from outlook and then get off the terminal server, it hangs and leaves the tmp files out there, then when they sign on they get a new profile folder like jsmith.doman.001
May very likely be related to server use. If you are indeed using Acrobat on a server, read the EULA carefully. Unless you have a special license with Adobe, server use is not permitted. You should install Acrobat on each machine that it will be used on with a separate license for each machine.
-
When it freezes, the mouse pointer displays like if it was thinking and I can't simply do anything inside Firefox and the open page, however, the rest of the computer seems completely operational as I can open anything else from the Start Menu or opening any files... Then, 40+ seconds later, it becomes normal again... I don't think it happens on a regular time basis, but it happens many times in the day, some more continuous and it is becoming a real pain! I even re-started the computer a couple of times and nothing!... Honestly, I have been loyal to Firefox and still prefer it, but need a quick solution!... Please HELP!
I tried Chrome -just for proving- and it didn't happened in 2 hours, then went back to Firefox (my fav browser) and keeps freezing with the message: "Mozilla Firefox is not responding" in the upper left corner... HELP PLEASE!!!!freezing at regular intervals: http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
http://kb.mozillazine.org/Firefox_hangs -
Language change in the app store
What do I need to do when the language in the app store is french and you want to change it back to english?
Hi Mario49
that article no getting solved
https://itunes.apple.com/my/app/id427076566?mt=8#
here is an exmple..
following this...
Your country's iTunes Store may not have the language available that you just enabled in iTunes (in the first section of this article). See the table below to determine which languages are available for your country.
If the table does have the language, you can apply that language to the iTunes Store by following the steps below.
If the table doesn't have the language, you cannot have the iTunes Store displayed in that language
but.. i dont see "malaysia" in the table.. it was change from english to malay...
can i suggest in AppleID add in one section.. language used.. and when anyone login with that appleID to the web/device automatically change/update to that language setting..
Maybe you are looking for
-
I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails
-
Find Your Stolen iPhones Once and For All
You just lost your iPhone (I had mine stolen last weekend). You panic and then you come to your senses. Ah! I'll use the "Find My iPhone" app. Thank you, Apple! After frantically asking someone to borrow his/her/their iPhone to use the app, you reali
-
How to bring in source file into OEPE
Hi, I used import to bring up an older version project, but it has a lot extras. The only thing I need is a plain java project. So I create a new empty java project and copy the source code to this project's src directory in the file system. I expect
-
Hi, In the attached VI,Iam giving temperature input from a string array,then converting it to binary and again converting to a decimal inorder to display in the thermometer.But while running it is giving incorrect values.what to do with this VI?
-
Receiving error Safari quit unexpectedly
Error occurs everytime I try to access info on a website. Appears I can pull up any site...no problem as long as I don't click on a link. As soon as I do, receive the error. Have updated my software and disabled java as recommended. Any additional