Getting back the pertially filled screen after showing the error

Dear Exparts,
I have come across a situation where i am populating data in a screen with a table contrlol. Before populating the table control, i have some input fields.
In the table control i have some data check. while checking the data i have given some error message with type I. But whenever i am pressing enter after showing the message, the already filled fileds(input fields and the fields in table control) are getting blank.
I want to show already filled data and make that fileld blank where i put wrong data.
Waiting for your valuable inputs.
Supratim

just check with
set HOLD DATA on.

Similar Messages

I can't get back to my home screen? Is the home button broke?

I can't get back to my home screen? Is the home button broke?

A simple press on the home button should always get you back to your 'app-menu'. If this is not the case there is a problem. It is possible that your button is broken. Maybe you could try first to install the latest iOS version through iTunes if you haven't done already. Or try to reset your iPhone by pressing the power button a few seconds and then Slide to Power off.
Let me know if it works!

I just installe Lion and when I get to the log in screen it shows the two users but when I try to select either of them nothing happens. How can I fix this so I can log in.

I just installe Lion and when I get to the log in screen it shows the two users but when I try to select either of them nothing happens. How can I fix this so I can log in.

Can you select them with "Arrow left" or "arrow right" key on your keyboard?

Iam not getting the data on screen after using the user exit zxpadu01

Dear Freinds
            As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in   ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.   -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn.         --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008   --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
               i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.

Hi Pranesh,
               i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti.

Getting back play counts and ratings after moving the librar

Hi,
I have just moved my music library on to my other internal hard drive. I pointed itunes to the new folder and then imported the iTunesMusicLibrary.xml and got all my playlist back. Unfortunately I cannot get my playcounts or my ratings to import. Does anyone know where these are located and how I can get them imported. With thanks.
Sean

Sean hello,
the reason that none of the info was in was in your library is, you started a new library file... by default when iTunes starts it looks in the home iTunes folder for the file 'iTunes Library' if it is not there a new file will be created and all songs will need to be added again but all playcounts, ratings and date added data will be lost ...
To recover your situation open the home iTunes folder and put the iTunes Library file on the desktop... now move the original iTunes Library file from the other HD back to it's proper place the home iTunes folder and leave it there... start iTunes for the 1st time after putting the file back by double/clicking on the file.
TP

I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen?

I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen? or how do i get the litle loading circle to go away.. it wont even load into itunes

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My computer will not open after in after I log in. What do i need to do in order to get back to my home screen?

My computer will not open after in after I log in. What do i need to do in order to get back to my home screen?

Hello kdeutsch86,
The article linked below details some useful troubleshooting steps that can also help resolve login issues.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Cheers,
Allen

Gnome often turn back to gdm login screen after I hit the keybord

I am not sure whether there are anybody get same problem as me. Gnome often suddently turn back to GDM login screen after I hit keybord( any keys). The rate I get this problem is 2 times within about 6 hours . This is really bad problem ,while I was writting php codes ,the gnome suddently turn back to GDM caused I lost all codes I wrote!
is there any solution?

http://bbs.archlinux.org/viewtopic.php?id=82308
I have same problem, but sometimes it works perfectly until I reboot my PC O.o

Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.

Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.
I Turn it off/on and nothing changes.

Hello bigboza,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
Have a nice day,
Mario

HT4623 i cannot get past the screen that shows the itunes icon and the usb plug, and my computer wont see my phone

i cannot get past the screen that shows the itunes icon and the usb plug, and my computer wont see my phone

Restore the device.

I updated my Ipad with IOS7.1.1. After more then 12 hours, the screen still show the Apple logo. How can I shut it down or reboot it?

I updated my Ipad with IOS7.1.1. After more then 12 hours, the screen still show the white Apple logo. How can I shut it down or reboot it?

It works really well.
Thank you for your tip.
Alain

I just restarted my phone, and now its frozen on the apple logo screen it shows when it restarts! anyone know how to get it to work?

My phone is frozen on the apple logo screen that shows when restarting. I tried to restart it again, but it still freezes and stays on that screen . I really dont want to reformat! Does anyone have any idea how to fix it? THANKS!

You have to put it in dfu mode, when its plugged into itunes reset it by holding the home and the power button, when it starts back up let go of the power button and just hold the home button it should find your phone and say its in restore mode. from there you just have to restore it

Does anyone get a black screen after dismissing the balance on a paygo phone

I get a blank, black, screen after dismissing the balance on my paygo 3GS iphone. To get rid of it I put the phone into standby and then wake it up!

From your logfile
[787100.353] (EE) Failed to load /usr/lib/xorg/modules/drivers/i740_drv.so: /usr/lib/xorg/modules/drivers/i740_drv.so: undefined symbol: I740_Sync
Corruption seems the correct assumption here; I'd boot using a rescue disc; then mount your actual system and reinstall all packages. After chrooting, that should be something like pacman -Sf `pacman -Qqet`

Can't get back to Mac OS X after windows 7 install

I have a Macbook (aluminum one, not a pro)with leopard OS X and have gone through the process of creating a 60gig partition and installing windows 7 32bit ultimate edition on it using boot camp. After the installation process and several restarts, it seems windows 7 works great... The problem is I have no idea how to get back to OS X.
When I restart the computer it gives a gray screen for a moment then a black screen with a white blinking cursor, it flashes to the typical windows OS selection screen for about 1.5 seconds then boots up in windows 7. I have spammed the up arrow key to make sure that I am able to interact with the DOS OS selection screen and windows 7 is the only one shown.
I am completely lost as to what to do about this. My Leopard OS disc is long gone, I have an .iso of it saved on my Mac partition but I don't know how to access that either.
If anybody could help me out I would be ever grateful. Thanks in advance.

Windows 7 has a hidden task bar at the bottom of the screen. It really isn't apparent especially if you have not used Win 7. This is not the power looking icon in the lower left, move the cursor to the lower right side and the task bar should appear.
Then, as with other windows versions, there should be a shortcut that allow you to access Bootcamp. Once in the bootcamp window you can select to reboot back to the Mac OS.

Getting back the pertially filled screen after showing the error

Similar Messages

Maybe you are looking for