Getting scanner error 22 from my HP Laserjet Professional M1213nf MFP.

I'm getting the scanner error 22 when i try copy a page using copier function. After that i have to restart my printer to vanish that error. I've also checked the firmware version by printing config report and it says the frimware datecode is 20130211 and software version is 20121108. I've also used HP Print and Scan doctor to fix the error. But nothing seems to be working for me. So please help me .......

Hello
I understand you are getting a scanner 22 error.
Perform a power reset.
Press the Power button to turn on the printer.
With the printer turned on , disconnect the power cord from the rear of the printer.
Wait at least 30 seconds. Reconnect the power cord to the rear of the printer.
Press the Power button to turn on the printer.
Update the firmware on the printer. I have included the url.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=4075457&
I will send you a private message with some more information to take a look at.
In the forum beside your handle name just click on the envelope to view it.
Let me know if that helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

As soon as I login with iChat, I get an error from MobileMe!

Hey, I've had this issue for a while, and my work around for it was just not using iChat. However, I want to use iChat now so I need a proper resolution. Now I have mobile me with my [email protected] address, and I have my iChat account with [email protected] (created before my MM subscription).
When I log into iChat for the first time, within minutes I get an error from MobileMe saying "You've entered an incorrect password for MobileMe, please try again"... I didn't do anything though.
If I go to MobileMe in System Preferences, it says: "Your password has changed. Enter your new password.
If you have not changed (or reset) your password contact MobileMe support."
If I enter my password in and get that fixed, the next time I start up iChat it says: "Your login ID or password is incorrect"... soo I'm confused.
The password for my @me and @mac addresses are different, is it possible they are sharing the same keychain? I do have the check box ticked to remember the password.
Any idea's?

Hi,
I would not repair at this time.
In the list of password you should find the one for iChat Or possibly several for iChat if you have different Account/Screen Names list by their Account names.
Double click on the one that is causing you issue.
In the new window that pops up put a tick in the Password Box. You will probably have to confirm with your Admin Password to Allow Once.
Does this show the right password ?
If not change the Password.
If it does then click the Access Tab and see if iChat is Allowed (Or Allow All is being used)
Either change to Allow All or add iChat to the List.
7:45 PM Saturday; April 3, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Why do i get an error from bios for my sata dvd recorder?

Hi!
I have updated my bois to the latest 1.70 version for my K9N Neo 1.0 motherboard and get an error from bios that the S.M.A.R.T drives dont work and that i cant be read from my Sata DVD recorder?
I have a samsung lightscribe 18X dvd recorder and it was no problem until i updated the bios. I have tryed to turn off s.m.a.r.t drives checkup but i still get the error.
What can i do to stop bios from the error? now i have turn my bios to "no errors" so i dont have to clickon F1 every time i start och restart my computer.
im using:
XP PRO 32Bit
AMD AM2 4200+
2048 MB Corsair 800Mhz Ram
2 x WD 250 GB Sata II 8 MB
1 x Samsung dvd lightscribe recorder
K9N Neo motherboard with 1.70 v Bios ( updated today)
//VargTass

Quote from: vargtass on 20-June-07, 22:51:54
Hard Disk : S.M.A.R.T Status BAD, Backup and Replace
//VargTass
Quote from: BOSSKILLER on 20-June-07, 19:39:17
so if you disable SMART & reported errors can your Sata DVD works normal?

I am getting RPD0018 Error from IDS for few portal requests

Hi,
We are getting RPD0018 error from IDS for few portal requests. I thought this error was generating when the IDS max wait time sets 30 seconds for gendata to respond back. I have changed this IDS Wait time to 180 Seconds, but still i am getting the same error. I was not able to figure out the cause. Can some one help me out?
Thanks

Hi,
This error is likely being thrown by GenData due to some failure in the generation, not by the max wait time. According to the documentation:
"Category: Error: Bridge Configuration
Gendata failure in //ROWSET[@NAME="RPD0018"]//VAR[@NAME="LOCATION"].
Cause: Gendata failed.
Remedy: Fix Gendata errors and try again.
You should look at the transactions that are failing and debug the forms/sections being generated.
-DA

Scanner error 22 message on LaserJet M1212nf MFP

I have a Laser Jet Professional MI212nf MFP printer which I use at the office for photocopying, printing and scanning documents. since last week, it has been showing a scanner 22 error and as such I cannot photocopy anything from it. Kindly help me what do to with it to correct the error.

Hi cnc1,
Welcome to the HP Forums!
I understand that you are getting the scanner 22 error with your HP Laserjet Professional MI212nf MFP printer, and I am happy to help!
Please try the solution within this guide. A 'Scanner Error 22' Message Displays on the Printer Control Panel.
If that does not work, Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Scanner error 22 with HP Laserjet M1210 MFP

Hello - I have an HP Laserjet M1210 MFP (fax, printer and scanner all in one) that has been working until yesterday. Now I am getting an error message "Scanner Error 22". I have tried to unpulg and replug the machine after a few minutues multiple time and restore factory default. But it still show the same error. I cannot make copies. I am frustrated and not sure what else to do. Please help!

The document scannere is having issues. Could be the ribbon connection, the scanner motor or the scanner assembly is having a hard time moving along the rail. If the unit is under warranty, bring in for service. If out of warranty all I can suggest is do a google search for the service manual and look for instructions for removing the scanner bezel and remove it and see if you can slide the scanner assembly back and forth and make sure it is seated correctly on the rail. I have had a couple of similar models where the scanner had sort of come off the track and removing the bezel and reseating solved the problem. Hope that is your issue and not a defective part in the scanner assembly.

How to get actual error from Crystal Report

We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in Advance

Same as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek

Help: Getting permission errors from an important document

I'm having permissions errors with a specific document. I've tried running Disk Utility with no luck.
The problem started when I tried to restore an older version of the document from Time Machine. Time Machine gave me an error saying I didn't have permissions to save the restored document. Time Machine also removed my newer version of the document, because I said I wanted Time Machine to replace the old document with the new one.
I was able to save the document from Time Machine to an external drive. But now I'm getting permissions errors with that document and I'm unable to save. The document is a Moneywell document (Moneywell is a finance app).
Here are some more details:
When I tried to saved the document, I got the following error: The file “Moneywell 2013.moneywell” is locked.
If you want to make changes to this document, click Unlock. To keep the file unchanged and work with a copy, click Duplicate.
There were three buttons: Duplicate, Cancel, Unlock
When I clicked Unlock, I got the following message:
"The file “Moneywell 2013.moneywell” cannot be unlocked.
You can duplicate this document and edit the duplicate."
There were two buttons: Cancel and Duplicate.
I clicked Duplicate and got the following message:
"Could Not Duplicate File
Moneywell could not duplicate your file at this time"
There was one button: OK
When I clicked OK, I got the following message:
"“Moneywell 2013.moneywell” couldn’t be copied because you don’t have permission to access 'Dropbox'
To view or change permissions, select the item in the Finder and choose File > Get Info."
So, I clicked OK.
I was saving to my Drop Box folder so I thought I'd try saving it somewhere else. I dragged the document out of my Dropbox folder and into my Documents folder (which is the parent folder for my Dropbox folder).
I got the same errors as I did when the document was in my Dropbox folder. Only this time when I chose Duplicate it's telling me I don't have permissions to my Documents folder:
"“Moneywell 2013.moneywell” couldn’t be copied because you don’t have permission to access “Documents”. To view or change permissions, select the item in the Finder and choose File > Get Info."
So, I don't know what's going on. I had none of these problems yesterday and my Moneywell document is the only document giving me this trouble.
I know permissions problems like this one are common so I hope someone can help me.

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Getting setpagedevice error from xerox ps printer

cannot print any indesign (cs1, windows7) document on one of our printers...the xerox 245 pro ps. i only get an error page with error:typecheck and offending command: setpagedevice.
is this a post script issue, a drive issue? i am not a techie so if someone could help that would be lovely.
thanks for any advice!

if anyone else has this issue...
i downloaded the global pcl driver 5 from xerox and that worked.
note the global pcl driver 6 did not print the graphics. the global pcl drive 5 did.

I can't download Mountain Lion. Get unknown error from app store.

Has anyone else had this problem? I'm using OS Lion now. Have updated all my apps. Looks like everything is cleared to go.
When I click "download" from the app store, I get an error. Says unknown error. Try again later.

Press Shift key while your Mac is starting and download OS X

Running windows 7 64 I get this error from downloader.exe The procedure entry point ?GetRegisterInfo@@GXPADHOH@Z could not be located in the dynamic link library transport_dll.dll

I keep getting this message from downloader.exe running Windows 7 64 bit O/S each time I start Firefox 3.6.9. The procedure entry point ?GetRegisterInfo@@GXPADHOH@Z could not be located in the dynamic link library transport_dll.dll. I have uninstalled Firefox and reinstalled it on a number of occasions but this message box persists. I can still use Firefox by just clicking the message away but it is an annoyance when starting the program. Thank you for any info you can provide me on this.

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Using SMTP I can not use a mail server with more than 13 characters. I get an error from TCP open

I have no trouble sending an email if the mail server name is less than 13 characters long. I get an error 54 from TCP open when it exceeds that length. How do I get around this?

Don't know what to say, I just tried the SMTP email VI I have with an 18-character mail server address and everything worked fine. The error 54 means that the address is ill-formed.
The only thing I would suggest is trace the mail-server address down through the hierarchy and make sure nothing is done to modify it. Also try putting a probe on the wire going into the TCP open function and make sure the string you see there is the same one you are using. Finally, change the formatting of the control taking the address into the subvi that contains the TCP open function (SMTP Open Session.vi)to show the slash codes and make sure some invisible characters aren't getting added along the way.
As a last resort save the vi in 6.0 format and send it to me and I'll
try it on my system--maybe there's something screwy going on with your computer...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Getting the error from icp report

i am looking to take the icp report but getting below error
An error has occurred. Please contact your administrator.
Show Details:
Error Number:70
Error Description:Permission denied
Error Source:Microsoft VBScript runtime error
Page On which Error Occurred:/hfm/Administration/ShowRunningTaskLog.asp
Edited by: Kimi on Feb 20, 2012 4:13 PM

Hi
Follow the below steps..
This issue is caused by NTFS permissions on the FileTransfer folder on the HFM Web Server and can be verified by giving the Everyone group Full Access Control to the FileTransfer folder
1. Check the data value of FileTransferFolderPath value in the Windows Registry: HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\Hyperion Financial Management\Web
2. In Windows Explorer navigate to the folder specified in above registry, right-click on folder name and select Properties then the Security tab.
3.Make sure that the below accounts should be available. if not Add IUSR, IWAM, IIS_WPG, Interactive, System, Service, Local Service, Network, Network Services, DCOM account, Anonymous and Everyone to the Web folder and
Give Full Control permissions
4. Click apply and Restart IIS
now it should work.. still if you face the issue follow the below Oracle knowledge base article
Financial Management Error "Error Number:70 Error Description: Permission denied" When Loading or Saving Objects (Doc ID 596447.1)
thank you
Regards,
Mahe

LaserJet professional M1213nf

How to configure my HP Laser Jet Professional M1213nf MFP to my Nexus 4 device so that I can do cloud printing?

Hi diwakaranand,
Welcome to the HP Support Forums. I see that you would like to learn how to setup your printer so you are able to use Google Cloud Print to print from your Nexus 7 tablet.
I’m presuming that you have already setup the printer with an ethernet connection. To setup Google Cloud Print first we need to setup the ePrint feature of your printer. To begin please start by Getting the Printer Claim Code. Once you have the printer’s claim code please Set Up A Custom Email Address for ePrint.
Now that the printer’s ePrint feature has been setup and configured we can now set up Google Cloud Print. Please follow the steps for HP ePrint-enable printers in the document Using Google Cloud Print with your HP Printer. I’ve also included Google Chrome’s Print a Page document for additional reference.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I get an error from iTunes saying it cant recognize the "iPhone"

I just upgraded to itunes 7.6.0.29, after that got a pop up with a message from iTunes saying it cant recognize the "iPhone" and to detach it and try again.
Just for verification uninstalled 7.6 and reinstalled 7.5. The problem went away. Then upgraded the iPod Touch software to version 1.1.3
Thinking that with the new SW version in the iPod maybe the problem went away upgraded again iTunes to 7.6 just to get the same error again.
Any way to "fix" this? or should I re-install 7.5 and wait for 7.7?
Any help will be appreciated.

Hi there,
follow the following steps below and it shud sort ur problem.
"THE FIRST AND FOREMOST BLUNDER THAT WE HAVE DONE IS OUR ITUNES VERSION SHOULD BE 7.6 IN ORDER TO UPDATE THE IPOD SOFTWARE/FIRMWARE TO 1.1.3 FROM WHAT EVER OLDER VERSION WE HAVE."
*MAKE SURE THE ACTUAL EXISTING VERSION OF THE ITUNES ON YOUR
COMPUTER/LAPTOP
STEP 1:Friends what I have done is I disconnected my IPOD from my laptop and
firstly downloaded the ACTUAL (EXISTING OLDER) ITUNES version (7.5) that I
initially had while i was DOING THE BLUNDER OF UPDATING THE FIRMWARE TO
1.1.3.
YOU CAN DOWNLOAD THE OLDER VERSIONS FROM THIS SITE:
http://www.filehippo.com/download_itunes/?3694
STEP 2: Once the ITUNES (older version) dump is available on your computer
uninstall the ITUNES and all the IPOD related stuff from your computer
from Start>Control panel>ADD/Remove programs.
Step 3: Restart ur computer and reinstall that older version ITUNES software
again.
Open the ITUNES software.
Step 4: Now connect your IPOD and the ITUNES will prompt you that an IPOD in
recovery mode is detected. It will ask you if u want to recover it to the
factory settings by clicking on "restore" under the "summary" tab on
ITUNES. Before doing this the very important step we need to do is to
UPDATE THE ITUNES VERSION FROM THE EXISTING OLDER VERSION TO 7.6 WHICH IS
VERY IMPORTANT.
STEP 5: To do this click on the HELP menu on the top and click on CHECK FOR
UPDATES. Thats it the ITUNES will be updated to latest version which will
allow us to update the IPOD'S FIRMWARE to 1.1.3 as well.
STEP 6: Now go to the summary tab of the IPOD and click on restore> wait for the
restoration process to carry on and the IPOD should be running back to
normal.
WELL FRIENDS THIS WHAT I HAVE DONE ON MY IPOD AND THE PROBLEM IS SORTED.
I HOPE THIS SHOULD SORT YOUR PROBLEMS AS WELL.

Getting scanner error 22 from my HP Laserjet Profession​al M1213nf MFP.

Similar Messages

Maybe you are looking for

Getting scanner error 22 from my HP Laserjet Professional M1213nf MFP.