Giving multiple assignments alongside a 'Next Patch' assignment crashes set

I can reproduce the behavior whereby creating a button in Layout mode and then, in Edit mode, assigning it with a 'Next Patch' assignment and something else ('Stop' specifically), will crash the set if you try to use it.
Has anyone else had this experience?
My workflow is that I have several patches representing songs. Each patch has separate playback plugins with grouped tracks. I have a master 'Play/Stop' action button assigned at the conert level to start each track. When the song ends on a patch, the play/stop button never turns off, and the master clock keeps running. I wanted to assign a 'Stop' assignment to my 'Next Patch' assignment so that when I click to go to the next song, it both stops the existing patch and then takes me to the next.

I finally got the solution from a friend at the TSR forum. It was a problem with QUicktime 7.2. I needed to install this update:
http://www.apple.com/support/downloads/macosx10410comboupdatev11intel.html

Similar Messages

  • Not Allowing "Next Patch" To Change Set

    I'm trying to solve a simple problem with MainStage 3.  I've got a number of sets with multiple patches in each, and I want to be able to switch back and forth between patches within sets without the danger of accidentally switching sets, since each set is on an individual click track.  I've mapped different keys to change patches and to change sets, but if I get to the last patch within a set I'd like the key that cycles to the next patch to not do anything.
    Basically, I want to switch sets only by using the key mapped to do specifically that, and I'd like the keys mapped to change patches not to have the ability to move from set to set.  Is this possible?

    See:
    *Firefox/Tools > Options/Preferences > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
    The setting in "Tools > Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
    See also:
    *https://support.mozilla.org/kb/settings-network-updates-and-encryption#w_general-tab
    *http://kb.mozillazine.org/accessibility.blockautorefresh
    *http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • How do I use edge commons composition loader to load multiple compositions with a next and back button?

    I am working on an interactive book and have set up each page as a separate composition in edge.
    I am using  the edge commons JS library to load multiple compositions into a main composition.
    You can see how this works here: Edge Commons - Extension Library for Edge Animate and Edge Reflow | EdgeDocks.com
    The way the edge commons tutorial is set up requires a button for each composition i want to load. I am interested in loading multiple compositions with a "next" and "back" button, and a "swipe left, "swipe right" gesture on the content symbol that each composition is loaded into. I also need the swipe features on the content symbol not to interfere with the interactive elements on the loaded composition.
    Please suggest a solution that will work without adding additional scripts beyond edge commons and jquery.

    Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
    Let me know if you have any luck.
    //Check to see if pageCounter already exists
    if (typeof EC.pageCounter === 'undefined') {
      // it doesn't exist so initialize it to first page
        EC.pageCounter = 2;
    //check if the page is only 1 digit -- patch for single digit
    if (EC.pageCounter < 9) {
       // it is, so we need to pad a 0 on the front.
      EC.pageCounterString = "0" + EC.pageCounter;
      //e.g.  01 ...09,11,12,13....115,222352,,....
    else {
      EC.pageCounterString = EC.pageCounter;
    EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
    EC.pageCounter = EC.pageCounter + 1;
    //TODO for back  -1

  • Msg SE181 on ML81N/ME21N- PR WITH MULTIPLE SERVICES ITEMS-1 ACC. ASSIGNMENT

    Hi,
    when trying to create a new order using transaction ME21N or creating an entry sheet  on an existing order based on a purchase requisition  with multiple items in the tab services , the system gives the error message SE181 .
    Debugging , i've discovered that the part of code in wich the system gets stuck , is the following :
    PROGRAM  DIMP_GENERAL_SAPLMLSP - INCLUDE LMLSPF3W
    Check if accounting data is in sync with service data "846124
               IF ACC_TOTAL NE COMSRV-NETPR and glob_empty_package NE 'X'.
                  IF SY-TCODE = 'ML81'.
                    MESSAGE I181.
                    EXIT.
                  ELSE.
                    IF GLOB_SUBSCREEN_INIT EQ SPACE.
                      ACT_PACKNO = ESLL-PACKNO.
                      MESSAGE E181.
                    ELSE.
                      perform add_message using comsrv-packno
                                          'E' 'SE' '181' '' '' '
    Someways , it risults that the total of the items value inserted in the tab services , is different from the total NETPR in eban .
    But that is not true . ACC_TOTAL is the variable in which the values of the multiline services is put ; I thought that maybe finding out how it is populated could help me to fix the issue , but I did'nt manage to do that .
    Can somebody help me , please?
    Thanks and Regards,

    Hi,
    I have found a note for this error:
    1102653 SE181 with correct account assignment data
    1159878    ML81N: SE181 is displayed when you delete a entry s
    I have also seen many customers with same error that also applied some of the following notes:
    1113594    BAPI_PO_CHANGE - No rounding in multiple acc -> SE1
    846124     ME21N: Account assignment prompt missing for subite
    800471     ML81: Commitments and reference problems
    784911     ML81N Problems with account assignment
    749021     Service selection with incorrect documents
    716030     ML81N: SE001 when copying a new entry sheet
    709163     ML81N - Multiple Account Assignments - Postings inc
    Best regards,
    Arminda Jack

  • Multiple Assignments Issue

    We are in process of implementing Multiple assignments for a clients despite the assignment carries same Payroll and GRE .Could anyone list on the impact of having multiple assignments , any document id to review,
    Basically to take a stock of bad effects , when configuring Retropay, Tax distribution, Benefits Deduction..etc..Please advise
    Thanks
    -S-

    Hi
    Thanks for that - I now have it working.
    I am however having issues with Totals.
    They are fine in Discoverer Plus but I need to run this report in Desktop.
    In Desktop, I have totals for rows and totals for columns for both HeadCount and FTE.
    Initially, none were showing.
    After changing the aggregation option from 'Default aggregation behaviour' to 'Show the sum of the values', I now get everything except the grand total for HeadCount.
    Example below
    ______________Head Count____________________________FTE
    ________Asg Cat 1______Asg Cat 2____Total______Asg Cat 1____Asg Cat 2______Total
    Org1________2____________3__________5__________2____________3___________5
    Org2________1____________2__________3__________1____________2___________3
    Total________3____________5_____________________3____________5___________8
    As you can see, I'm getting every total except the total of '8' for HeadCount but I am getting it for FTE.
    I know this is often due to folder joins, but FTE and HeadCount are coming from the same folder, yet FTE is working and HeadCount isn't.
    Any ideas?
    Many thanks
    Martin
    Edited by: christm31 on May 4, 2012 10:27 AM

  • A person can have multiple assignments as an employee.

    I'm interested for the architecture using 2 PERNR.
    A person can have multiple assignments as an employee. To make a distinction between employment relationships (employees = 0EMPLOYEE) and real people (0PERSON), the person is an attribute of the employee.
    Why "multiple assignments"? for what?

    Hi Konstantin,
    This may be the case in concurrent employment.
    Please check:
    http://help.sap.com/saphelp_47x200/helpdata/en/31/39de77c15c5043b0b420b60a89e4db/content.htm
    In general, when an employee has two personnel assignments, we generally create two separate positions and assign the same personnel numbers to these positions, percentage of which assignment not be more than 100%.
    However, if according to customer policy, a real person is to be paid/benefits are arranged differently based on the personel assignment he/she is holding, then you will need two separate employee numbers. In the end, however, there is only one physical person so you will maintain this information using 0PERSON characteristic.
    Regards,
    Dilek

  • Union deductions across multiple assignments

    Hi there,
    We are setting up Unison Union deductions which has rates based in steps on the total pay across all assignments. We have a wide use of multiple assignments. Due to the way it is calculated it is not possible to calculate the Unison amount against each individual assignment and combine it.
    I gather we can do this using Historic Rates but have so far failed to get it picking up rates from all assignments.
    Any help is greatly appreciated
    Neil

    Can you see if this metalink note helps
    How to Run One FSG Report For Multiple Sets of Books [ID 1023889.6]
    Thanks,
    Anil

  • NI Multiple Assignments Checkbox - Person Record

    Hi,
    Please can someone explain what the "NI Multiple Assignments" checkbox is used for on the person record (ie, what it represents)? It looks as though it represents whether a user has multiple assignments, however why would we need a checkbox to do that? Surely we could derive that from the assignment records? We have some issues around RTI which we think may be related to this.
    Regards

    I think , we can use to have same NI element to the other assignment whihc we will set up on person , if we set multiple assignments and all assignments having same NI is concept behind this

  • OTL Multiple Assignments Approvals

    Hi All,
    I have configured OTL time entry with multiple assignments successfully. Each assignment has its own Supervisor. Now I am faced with the challenge on how to send approvals for multiple assignments. I started using Formula(Select mechanism) but not quite clear on if each line entered on the time card, will go thru the formula. and pick the Supervisor.
    I would appreciate any inputs.
    Thanks
    Veena

    Authorized delegate screens won't support these customizations. Also on the approval front, its a tough job getting the approval routed based on the assignments, would rather suggest for a redesign of the solution approach.
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Oracle HR restrictions based on multiple assignments and multiple GRE's.

    In oracle HR, with multiple assignments and multiple GRE. How can we restrict to having 1 assignment per GRE. I do not want more than 1 assignments per GRE. Has anyone done this before?

    Hi,
    If the requirement is to prevent the creation of multiple assignments, you can achieve that by personalizing the assignment form.
    Thanks
    Satheesh

  • How do you select and move more than one bookmark at a time? Shift+Click does not select multiple items that are next to one another in a list because the item

    How do you select and move more than one bookmark at a time?
    Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.

    Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
    * one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
    *see also [[How to use bookmarks to save and organize your favorite websites]]
    *and [[Use bookmark folders to organize your bookmarks]]

  • Is it possible to (selectively) automatically move to next patch and start?

    .. so that (for example) my first three songs play one after the other then MS stops awaiting a play cmd?
    I can't see this anywhere in the help but it must be a frequently used function.

    I don't know a way of doing this so it automatically skips to the next patch to play after the song ends, but there are a few other ways of doing this:
    1. You could combine the three tracks into one and have it play as one Playback. Insert Markers if you needed them for navigation to each of the sections/tracks.
    2. You could have three different plug in's and play/mute the separate channel strips
    3. There is a mixer with backing tracks template that might be useful for the type of performance/functions you need.
    Try any of those, meanwhile, I'll try to think of more options.
    J.

  • Multiple Assignments in Timekeeper entry form

    Team,
    We are trying to setup multiple assignments for Timekeeper.
    We followed the whitepaper out on Metalink and got most of the stuff working.
    Now, we are showing a list of jobs for each employee to choose from whether it is primary job or secondary job.
    The issue that we are getting into, how do we filter the list just for the employee that we are entering timecard for.
    This is doable in Self service using right conditions but not clear on how to do this in timekeeper.
    Has anyone done this before?
    Any help will be appreciated.
    Thanks
    Arul

    I presume you have a specific column in TK for the job and that you have linked this through the TK layout preference.
    Have you tried making the LOV behind this column dependent on the employee id of the row you are querying? Not sure if it's possible, but worth a try.
    Otherwise, I would suggest that you create a Time Entry Rule which is linked to a TER Group just for the TK. The TER could then do the validation to make sure you don't select an invalid value for the employee. It's a bit late in the process, but would prevent errors.
    This TER has been used on my projects to ensure that the hours type selected is valid for the employee. This is a simialr scenario.
    Regards
    Tim

  • Employes with Multiple Assignments

    Hi all
    can you please let me know how can i get list of employees with multiple assignments.
    Thanks in advance

    This has now been resolved, closing this post.
    thanks

  • Multiple assignments of one sales order to several customers

    Hello all,
    One of my users send me a Excel report with multiple assignments of sales orders to different sold-to parties. It looks somehow like this:
    Sold-to  Sales Order
    A........100
    .........200
    B........100
    .........200
    .........300
    C........100
    .........200
    This error is not reproduceable but occured now the second time. If I run the query it looks fine.
    Before I blame it to the user I would like to know if there are any technical reasons why this could happen, e.g. a change run is active while the report is running or the OLAP engine or the cache may be buggy in certain cases.
    Any hints?
    thanks,
    Marco
    Message was edited by: myself
            Marco Males

    Thanks for all your replies!
    I checked the cube content and it was okay. But I didn't check the index. If this was wrong then every user would have the same problem, wouldn't they?
    My guess is that it was a problem with refreshing the report. I told the user to delete all data and then save the workbook again. So, when he refreshes it, there are no old values in it.
    Marco

Maybe you are looking for