Glossary Wizard Issues

Here's an interesting issue.
When using the Glossary Hotspot Wizard, my template.css font
changes as soon as a term is selected and the "next" button is
pressed. My coworker has found this same situation is happening to
him. Any idea why this is occurring? Better yet, any idea how to
make this stop recurring?

Welcome to our community, Implicit_D
Can you be more specific about exactly what changes?
The Glossary Hotspot Wizard inserts certain styling
characteristics for its own hotspots. You may change them if you
like, but it has its own formatting until you do.
Cheers... Rick

Similar Messages

  • E72 Wlan Wizard Issue: Icon/Selection disappeared ...

    Crossposted from here: http://discussions.nokia.com/t5/Eseries-and-Communicators/E72-Wlan-Wizard-Issue-Memory-Full-and-icon... 
    After my mobile phone automatically switched off while I was trying to check my SMS because of low battery, I plugged it to charger and switch it on again. Upon turning on however, the Wlan Wizard icon/selection has disappeared from start up screen/desktop. When I try to access Wlan Wizard by going Menu > Ctrl Panel > Connect > WLAN wiz., it gave me Memory Full error instead.
    I've tried various method available that I can get from here: Turn off and on (it worked when the same issue happened a long time ago but not this time), deleting licenserserv.log to free up space in phone memory (still no Wlan Wiz and still Memory Full error after restart), going back to factory setting and restart but all to no avail.
    Following the advice in the thread I posted before, I installed Nokia Suite and updated my E-72 with the latest software. I even try reinstalling for good measure. Still the same thing: no Wlan Wizard icon on desktop/home screen and Memory Full upon Menu > Ctrl Panel > Connect > WLAN wiz.
    What else can I do to solve this issue? The attached picture is my phone info using Nokia Suite. Note the red highlight box. Is it supposed to be so?
    Attachments:
    nokia e72.jpg ‏155 KB

    You need to try the *#7370# reset. It should not touch anything on the memory card but you can remove it as a precaution. Do 2 backups, one with everything and the oter with only your data. Sometimes when you restore all the settings as well it brings bck the problem. 
    After the reset, try the phone to make sure everything is working fine before restoring your backup. If the problem comes back after the restore then reset again but this time use restore using the data only backup. 

  • Report and Layout Import Wizard issue

    Running SAP B1 v8.82 PL04. RDC into the client server.
    I'm getting an issue when importing a report.  I get all the way to clicking the "Finish" button and it never loads to the next screen (telling me if the import was successful or not).  When I go to the location I specified for the report, it appears there but with a different icon and when I click it shows me an error: "No matching records found 'Queries' (OUQR) (ODBC -2028) [Message 131-183]".
    Narrowed down the issue a little:
    - Happens for any report I try to import
    - Happens for both file types (.rpt / .b1p)
    - The wizard works in the other databases on the server
    - Same issue when I try on different computers with different log ins
    There didn't seem to be any major event that triggered the issue.  I was in the middle of importing a few reports, and imported a couple successfully, when all of the sudden the issue occurred.
    You can also refer to the video link I've attached below which is a complete walk-through of the issue.  Any help on this is greatly appreciated, this is really holding me up. Thanks in advance!
    -Andrew
    http://screencast.com/t/g88C39K78Zgs

    Verifique a SAP Note 1532509.
    Solution
    Please run the below query and if it returns results please Go to the PEQ page mentioned below or log a support message via SAP Service
    Marketplace, and attach the results of the query.
    select * from CDPM where ObjectType = 232 and ObjectKey not in (select doccode from rdoc) order by permid
    Select * from USR3 where PermId
    not in (Select distinct Absid from OUPT union Select distinct cast(PermId as nvarchar(50) )from CDPM)
    the solution to this note can be found at:
    http://wiki.sdn.sap.com/wiki/display/PEQ/Can%27t+import+CR+template+into+B1
    By using

  • Database adapter wizard issue

    Hi,
    I recently created a bpel flow containing a database adapter where I completed all the steps through to completion. Since then, when I attempt to review the adapter by double-clicking on it and then click on "Define Adapter Service", then when I step through to the "Adapter Config. Wizard - Select Table" I am told :
    'No Tables Imported'.
    I cannot figure out what I have done to have caused this. As far as I can see everything related to the database adapter from its initial creation still exists:
    * under "Application Sources" I see the adapter, and within this are 3 javaclasses that relate to the tables in the join
    * under "Application Sources->TopLink" again I see a reference to the adapter
    * under "Integration Content", there is another reference to the adapter, which contains :
    - wsdl, xsd & toplink mappings xml
    I have two further database adapters that do not have any issues - I can use the wizard to review their configuration. The entire flow compiles without issues...
    Is there anyway I can "fix" the 1st adapter so that the wizard correctly shows the imported tables?
    Thanks in advance.
    Anit

    Hi,
    No it is not a bug, I think. If you created your query by choosing from imported tables/views and related those using the wizard, the only way to change them is to re-import the tables and basically redefine your database adapter.
    It's a pity, but that's how it is (also in 10.1.2 I saw recently).
    Regards,
    Martien

  • Anywhere access wizard issues

    Hi,
    I have set up anywhere access (specifically remote web access) on a 2012 R2 Essentials server.
    When I ran the wizard, it found the following issues:
    "Anywhere Access to your server is blocked. Some routers may not work properly with your server...Some Internet service providers (ISP) block TCP ports 80 and 443 to prevent customers from remotely accessing services hosted on their networks..."
    and
    "There may be more than one router on your network. Windows Server Essentials is not able to setup the networking correctly."
    We have a SonicWall router sitting behind an AT&T U-verse modem. The router's WAN IP is a static public IP from AT&T, and the Windows Server has a static LAN IP.
    Since the SonicWall doesn't support UPNP, I manually configured NAT policies so that https 443 traffic is forwarded to the server. 
    The strange thing is that remote web access works just fine for the most part. Are the following issues safe to ignore?
    Thanks.

    Hi Jason,
    à
    Since the SonicWall doesn't support UPNP, I manually configured NAT policies so that https 443 traffic is forwarded to the server.
    When run
    Set up Anywhere Access wizard, the Windows Server 2012 R2 Essentials will attempt to configure your router. If UPnP is supported in router, Windows 2012 Server R2 Essentials may be able to automatically configure the router. Since your SonicWall router
    does not support UPnP, those red warnings will be shown as you see in the Set up Anywhere Access wizard and you need to
    manually configure your router. Meanwhile, since you have manually configured the router to forward TCP 443 port, the RWA will run as normal.
    So, I agree with Robert. If RWA works fine, those red warning message in
    Set up Anywhere Access wizard can be safely ignored.
    Hope this helps.
    Best regards,
    Justin Gu

  • Management Reporter wizard issue

    I prepare the migration for Microsoft FRx to Microsoft Management Reporter and I have an issue for Management Reporter wizard when I wrote the server name cannot connect for step 2 specify connection management reporter database server and have long time
    and show me error message “can’t retrieve database ensure server and login credential are correct”, although at the same time I connected by server for Report Design and I proceed all instructions required for Migration guide documentation. please help me
    and solve this problem

    I'd try them over here.
    https://community.dynamics.com/default.aspx
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Customization Wizard Issues

    We have an issue with Adobe Reader when we use the Customization Wizard 9 to create our transforms for deployment. After creating the transforms and install Reader none of the MS Office Application embedding works. We cannot insert an Adobe PDF nor can we open a PDF in any MS Office 2007 Application.  It gives me an error telling me that the application is not installed.
    If I install without using the Customization Wizard these features work just fine. I have done a registry comparison between the two installs and the differences are significant after weeding out my customs. I inserted the missing registry keys into the transform (primarily AcroExch entries) and the issue is still there. I suspect that there are also files missing from this install as well.
    I can work around the need of the Customization Wizard but have several changes such as disabling updates that I would like to incorporate into the install package.
    Please help!
    Thanks in advance  
    Corey Owen

    Hi,
    You need to provide more deployment details such: ]
    Versions
    Any chaining you might be using.
    Deployment method (AIP?)
    Installing over other products?
    etc.
    There was a bug in 9.3.4 that was about linking to Office docs, but I don't think that's your problem. See the release notes.
    You can of course customize the install via registry keys or installer tables (not recommended) manually. For a Preference Reference (db of registry keys), get AIM from www.adobe.com/go/acrobatitinfo. See also the admin guide.
    Ben

  • Flex PHP Wizard Issues (Is Flex/PHP ready for prime time)

    I have been designing a website using Flex. I thought of using Flex form many reasons, but one was to reduce the number of languages used in the development process. I am going to be hosting at Godaddy so I thought  I would try PHP. I normally would use Java, but Flex seems to want Enterprise Beans and Java Remote Objects which cost to much and would probably not work on Godaddy. I started out with MAMP on a Apple computer and have design 60% of my application, when I started noticing as the database go larger, I started getting communication errors with the MAMP version of mysql. So I installed MySQL and and started using Apache and PHP that comes with OSX. The communication errors are increased.
    Any suggestions? I am at the point, if I can find a proven programmer, with GoDaddy/Flex/MySQL/PHP and Java experience to help answer some question, I think I can come up with contract dollars.
    First question is Flex ready? or is this an issue with PHP?

    have moved this thread from the ADDT forums to the Flex Data Services forums

  • SQL Server Import and Export Wizard Issue

    i am trying to export SQL data into excel to send out weekly reports.  I have created a view and a SQL account has access to this view; however, I am unable to successfully export the data.  In preview I see all of the data yet it fails on the
    Pre-execute with the below.  It creates the excel file with just the header.  I am using SQL 2014 and loaded the 64 bit AccessDatabaseengine.  I am selecting excel 2007.  Any ideas welcome.
    Messages
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80040E37.
     (SQL Server Import and Export Wizard)
    Error 0xc02020e8: Data Flow Task 1: Opening a rowset for "WeeklyList" failed. Check that the object exists in the database.
     (SQL Server Import and Export Wizard)
    Error 0xc004701a: Data Flow Task 1: Destination - WeeklyList failed the pre-execute phase and returned error code 0xC02020E8.
     (SQL Server Import and Export Wizard)

    Hi astro,
    Please ensure that you haven’t renamed or moved the destination excel file during the exporting process. Also make sure that “Create destination table” option is checked as below screenshot and the SQL statement is correct.
    For more details about using SQL Server Import/Export Wizard to export data from a SQL Server database to an Excel spreadsheet, please review the below blog.
    http://www.mssqltips.com/sqlservertutorial/202/simple-way-to-export-data-from-sql-server/
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • Configuration Wizard Issue

    Hello,
    I am executing Configuration Wizard for Automatic Configuration for eTax. It gives errors for certain steps where it refers to particular services which were not present in SR. I have published these services from backend to SR and these are visible in SR now. But these services are not visible in SOA Management ->Business Admin ->Web Service Administration and when I execute Configuration Wizard again it gives me same errors.
    Could you please guide me to resolve this?
    Helpful answers will be appreciated.
    Regards,
    Pramod

    Solved

  • EA1: Diff Wizard Issues

    The schema difference tool now seems to work reliably, but I find it very limited. The main limitations are
    1 it is 'one-way'.
    It doesn't show you objects in the target schema which aren't in the source schema. I think this is by design - the aim seems to be to provide a tool for converting adding one schema to another. I had hoped for more of a 'schema merge' tool (see below).
    2 You can't see the actual differences.
    For tables you can see the ddl to change the table, but you can't see what was there in the first place.
    For PL/SQL objects, the 'create or replace syntax' means you can't see what the differences were at all.
    This is what I would like to see.
    As I said above, I would like a schema merge tool, just like the code merge tool in JDeveloper and many other development tools.
    1) The ability to view the two schemas side by side with differences highlighted.
    2) The ability to create a merged schema by selecting differences from either side
    3) Generate DDL to go from either schema to the merged schema.
    I used to use something similar years ago with ERwin http://www.ca.com/us/products/product.aspx?id=260
    BTW. How do you post proper hyper links in the forum?

    An example of an empty line? If you insist... ;-)
    Delimiting the code blocks with *.
    Here's the contents of an SQL tab in the base schema:
    *  CREATE OR REPLACE FORCE VIEW "VW_AFI_CNO" ("AFICNO_ID", "AFICNO_CODIGO", "GENTRADUC_TRADUCCION", "GENIDIOMA_ID") AS
      SELECT AFI_CNO.AFICNO_ID, AFI_CNO.AFICNO_CODIGO, GEN_TRADUCCIONES.GENTRADUC_TRADUCCION, GEN_TRADUCCIONES.GENIDIOMA_ID
    FROM   AFI_CNO, GEN_TRADUCCIONES
    WHERE  GEN_TRADUCCIONES.GENEXPRES_ID(+) = AFI_CNO.GENEXPRES_ID
    Here's the contents in the destination schema:
    *  CREATE OR REPLACE FORCE VIEW "VW_AFI_CNO" ("AFICNO_ID", "AFICNO_CODIGO", "GENTRADUC_TRADUCCION", "GENIDIOMA_ID") AS
      SELECT AFI_CNO.AFICNO_ID, AFI_CNO.AFICNO_CODIGO, GEN_TRADUCCIONES.GENTRADUC_TRADUCCION, GEN_TRADUCCIONES.GENIDIOMA_ID
    FROM   AFI_CNO, GEN_TRADUCCIONES
    WHERE  GEN_TRADUCCIONES.GENEXPRES_ID(+) = AFI_CNO.GENEXPRES_ID
    Here's the comparison result:
    --  DDL for View VW_AFI_CNO
      CREATE OR REPLACE VIEW "VW_AFI_CNO" ("AFICNO_ID", "AFICNO_CODIGO", "GENTRADUC_TRADUCCION", "GENIDIOMA_ID") AS
      SELECT AFI_CNO.AFICNO_ID, AFI_CNO.AFICNO_CODIGO, GEN_TRADUCCIONES.GENTRADUC_TRADUCCION, GEN_TRADUCCIONES.GENIDIOMA_ID
    FROM   AFI_CNO, GEN_TRADUCCIONES
    WHERE  GEN_TRADUCCIONES.GENEXPRES_ID(+) = AFI_CNO.GENEXPRES_ID
    Thanks,
    K.
    PS: Jim, we did a complete backup/restore with EXP/IMP between 2 Redhats 64 bit.
    Message was edited by: K

  • Adobe Customization Wizard issue

    Is there an option to disable Javascript when creating a transform? I've looked through the options and don't see anything.

    Yes, but you have to use the registry feature to do it.  You can also use the new version 10.1.2 registry entry that will not only disable JavaScript  but lock it too.  These entries and others can be found in AIM (Administrator's Information Manager).  Here is the link to the AIR based application:  Administrator's Information Manager

  • Payment Wizard SAP B1 2005 PL23 Issues

    Hey Friends,
    I asked about this issue twice already but I still don't have any solution yet.
    When I do the Payment runs, the payment wizard either:
    Randomly executes only some of the recomended payments
    or
    does not execute any of the recomended payments at all.
    The wizard sometime recomends non selected payments.
    At stage 9 of 9 of the payment wizard, when I choose to see the non-included transaction report, I get the message "No Data".
    Please any suggestions to help me resolve this issue will highly be appreciated.
    Kind Regards
    Chike

    Hello,
    Have you tested the issue still exists on the latest patch for 2005 A SP01? Many payment wizard issues were fixed in later patches which may alos resolve your issue.
    Regards,
    Paul Finneran
    SAP Business One Forums Team

  • Glossary Hotspot Wizard problems

    I am trying to use the Glossary Hotspot Wizard in my current
    project. When running the wizard, I am choosing to Automatically
    add definitions for all topics, choosing All Folders with Any
    Status, I am not make it case-sensitive or define the first
    occurrence only. I select my glossary (the only one I have set up)
    and choose all of my terms in the glossary. Then I run the wizard,
    and after a few minutes I get a pop-up that says "One or more of
    the following files could not be checked out. These files must be
    checked out to continue. Would you like to cancel the wizard?" If I
    select yes, I can't create the glossary hotspots. If I select no,
    it gives me the pop up again with a different file. This could
    potentially happen to hundreds of topics. What am I doing wrong? I
    don't have to manually check out every file in my project, do
    I?

    Hi LMcNeil and welcome to the RH community.
    This sounds like you are using some sort of source control
    application integrated with RH. Maybe RoboSource Control? If so,
    yes you do have to have all your files checked out. This is because
    the glossary wizard updates all the files (it adds an expanding
    text) where it finds a match for a glossary term.

  • Why has HTML in RH X5 glossary hotspots?

    Hi all,
    I have a RoboHelp X5 WebHelp project which is updated every quarter.  I do not work in the client's office - simply send the WebHelp to them for publication.  The project is updated every quarter and while testing before this quarter's publication at the end of June a problem has come up with how glossary hotspots display.  After every glossary hotspot (in magenta...client's choice, not mine) we now have an extra space.  In previous publications that extra space wasn't there.  I've pasted a screen shot here to show you:
    The IT guy in the client's office diagnosed it this way after looking at the HTML:
    (<a class="glossterm" href="javascript:kadovTextPopup(this)" id="a1">CCO</a> <span class="glosstext" style="display:'none';" id="POPUP181927339">Chief Credit Officer - John Doe</span>).
    The problem is the space between </a> and <span (highlighted above). The space needs to be right before the text inside of the <span> tag.
    Copied below is code from the last quarter's publication when we didn't have the extra space followed by this quarter's project which suddenly and inexplicably has the extra space.
    (<a class="glossterm" href="javascript:kadovTextPopup(this)" id="a1">CCO</a><span class=glosstext style="display: 'none';" id=POPUP43291891 >   Chief Credit Officer - John Doe</span>)
    What I need to try to determine is how and why the HTML would change when I made no change to content in the project and haven't knowingly made any updates to RoboHelp.  The IT guy thought there might be a possibility that an automatic Adobe Updater might have touched RoboHelp somehow.  If that's true, how might I get rid of this problem?  An uninstall and reinstall of RH X5?  And if it isn't possible that the RH software was somehow changed without my doing anything, what else could account for this change in the HTML?  My client doesn't want to publish with these extra spaces but I have no idea how to get rid of them.
    Any help would be greatly appreciated...thank you.
    Diane
    P.S.
    If any of this rings a bell about some recent posts of mine, you're not crazy.  I wrote about a problem I was having with a custom program written for me to identify and locate manually-added glossary hotspots so I could update definitions when necessary.  RoboHelp can only find and update hotspots added with its Glossary Wizard and the client had insisted on some hotspots in places different than the wizard would place them.  Suddenly with this quarter's project publication the program no longer worked and we were unable to find out why.  If in fact the RH software was somehow changed through an automatic update or some such thing, that would explain why my custom program no longer worked...it was looking for HTML that is different than when the programmer first wrote the program for me.

    I actually love RoboHelp so hated thinking I was blaming it!
    Imported a topic from the problem project into the test project, regenerated
    WebHelp and all is fine.
    In case this helps at all, this is the HTML in the test project for a
    glossary term in the topic I imported from the real project:
    credit approval authority <!begin!kadov{{><!--
    kadovTextPopupInit('A3');
    //></script><!}}end!kadov-->
    And here's the code from that same glossary term as it exists in the real
    project where I have the problem:
    credit approval authority <!begin!kadov{{><!--
    kadovTextPopupInit('A3');
    //></script><!}}end!kadov-->
    And here's the code for that same glossary term in an old version of the
    project where I don't have the spacing problem:
    credit approval authority <!begin!kadov{{><!--
    kadovTextPopupInit('A2');
    //></script><!}}end!kadov--

Maybe you are looking for