Gmail emails with Read Receipt Request are returned as "Not Read"

When reading and organizing my emails with my work gmail account that have read receipts attached to them, they are reporting "Not Read", "deleted without being read" even though I have read them. This is happening both from my iPhone and from web based gmail. It seems that upon IMAP syncing, the "Not Read" status goes out.
I believe this is linked to my iPhone because I emailed one of my coworkers on the same gmail domain an email with a read receipt attached. After he read and archived it from web based emailed (he doesn't have an iPhone), it did not return any response, either "read" or "not read". This is what previously happened with emails viewed on my iPhone.
Is there some setting for Read Receipts? How can I stop these messages from showing as deleted and not read?
Thanks!!!

Just found this thread on GMail sync issues:
/t5/Nseries-and-S60-Smartphones/N8-Email-Client-Sync-issues-and-deleted-emails-still-appearing/td-p/...
So far it looks good - after following the advise in the last post by Ali_L sync seems to working. Push does at least, better than ever.
Short version:
1. Remove your GMail account from the N8.
2. Add your GMail account again, but this time make sure you decline the "Terms of Service" when they are presented to you.
3. Manually configure sync intervals / GMail IMAP folders etc.

Similar Messages

Email with Mail Rules applied are automatically marked as read

I am using Mail in Mac OS X 10.5 with Gmail IMAP, and any email I receive that has a mail rule applied to it (such as, if person x emails me move email to this folder) is automatically marked as read (i.e., doesn't show up as a new message). Any email that comes into the Inbox, however, is marked as new.
The mail folder I am testing this with does not have the "mark email as read" rule applied to it, yet it keeps marking any email that goes through this rule as read. Also, no new mail sound plays after receiving these emails. In Tiger, even when an email was automatically marked as read by mail rules, it made the new mail sound.
I don't know if this is a Mac OS X Mail issue or a Gmail IMAP issue, but it's frustrating as all edit: I guess he-double-hockey sticks is a four letter word]. Is anyone having this issue and does anyone have a solution?
Message was edited by: thenotoriousxis

For me, it never counted it as new. It would just appear.
I deleted the Mail preference file and that seemed to fix some things, even though it did require me to re-setup Mail almost entirely. This morning, though, I got an email from my girlfriend that did not filter at all, even though the email address she sent from is in a rule. Might be an isolated incident, though.

Read receipt requested but I'd like to know who sends it before sending receipt.

I often get emails which apparently have requested a read receipt as I am always asked for my SMTP password, which I decline every time. My question is, Can I discover who is requesting the receipts so I can acknowledge them or put them on my permanent junk filter?
Thanks.

Oops, sorry, that was me. (Probably not, but I do request read requests on important messages.)
Read receipts should not be triggered until you open a message, or if you use the default setting of having the message marked read when you preview it. So you should be able to tell which message is associated with the receipt.
(Actually, based on my experience with Outlook, a "didn't read" receipt may be triggered by deleting a message without reading it or moving it to a folder without first marking it read.)
You can create a Message Filter to detect and tag messages with a receipt request. I only tested this on a single message, so it probably requires some refinement.
(1) Create a new Receipt tag
"3-bar menu" > Message > Tag > Manage Tags...
Click Add, then type or paste Receipt, then choose a color. I picked magenta.
(2) Create a new Message Filter
For easier entry, select and copy this text: Disposition-Notification-To
"3-bar menu" > Message Filters > New...
Click New, and name the rule something like: Read Receipt
Click the Subject button and assuming the list does not already show '''Disposition-Notification-To''', choose Customize...
Type or paste Disposition-Notification-To and click Add then OK.
Back in the Filter Rules dialog, change from Customize to Disposition-Notification-To, keep contains on the next button, and type a @ in the text box to the right. This should match any message with a read receipt request.
In the lower section, choose Tag Message and then Receipt. Click OK to save your rule.
Back in the Message Filters dialog, you can click the Run Now button to test it, assuming you have a message in the Inbox with a read receipt requested.
Once you are confident that the correct messages are tagged, you could do something more aggressive with your rule...

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

I just received an email with a receipt for a purchase that i did not do

i just received an email with a receipt for a purchase that i did not do
<Personal Information Edited by Host>

Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here. I've asked the hosts to remove your email address and address from your post
If you didn't make it and nobody else has access to your iTunes account then you can contact iTunes Support via this link and ask them for help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have placed an order (: AD016135648) and I am unable to reset my email address because I am not receiving an email with a temporary password. I am not a fan of your website. I'

I have placed an order (: AD016135648) and I am unable to reset my email address because I am not receiving an email with a temporary password. I am not a fan of your website. I'm 30 minutes into this which should have been a breeze.

We are not Adobe. This is a user to user forum. We are customers just like you.
You need to contact Adobe:
Contact | Adobe
You may need to use the chat option.

? With Ray-traced 3D are animated mattes not possible....

Hallo,
With Ray-traced 3D are animated mattes not possible ( say this help function ).
But - library.creativecow.net/mize_rob/AE_Flame-Effects/1 by Rob Mize - theese animated
mattes work.
And what means a separately area to render in classic 3d renderer?
Simply, can you do the same as in classic only with some better possibilities?
thx a lot,
In german:
animierte Masken sollen nicht in ray traced funktionieren, in o.g. Projekt funktionieren diese aber..
Und was heißt "Sie könne Komps über den klassischen 3d renderer in einer separaten Umgebung rendern?
Mir ist unklar, ob die Einschränkungen für den ray traced für die gesamte Komposition gelten oder kann
man beides - für verschiedene Ebenen - abwechselnd einsetzen?
Vielen Dank
https://docs.google.com/file/d/0B7W-ipXwfajoV1VVbTBqSnpxMmM/edit

Hallo Mylenium,
vielen Dank für deine Antwort, deutsch ist mir schon ein bissschen lieber!
Was mich irritiert, ist , dass das Projekt von Rob Mize in ray-traced gerendert keine Veränderungen bringt.
Es funktioniert also alles wie vorher - ich meine die vielen animierten Masken -.
Eigentlich sollten die ja nicht mehr funktionieren....
Ich habe das auch mit eigene tests probiert , es läßt sich alles animieren und trotzdem die Vorteile von ray-traced
nutzen!?!
Du meinst, die zu animierenden Masken in einer separaten comp realisieren, rendern und später integrieren,
verstehe ich das richtig ? ! ?
Noch eine Frage: Was meint Adobe Hilfe mit folgendem:
Sie können comps weiterhin über den classic 3d renderer in einer separaten Umgebung rendern.
Was meinen die mit separater Umgebung, - das was du gepostet hast -?
Schön, dass es deutschsprachige hier gibt, echt cool
Nochmal danke schön für dein reply und noch einen schönen Sonntag

How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

Hi mujabee1111,
Please uninstall the application from your machine and then use the link below to download the installer for the CS5 download in English language:
Download CS5 products
Regards,
Sheena

Outlook 2010 Exchange 2010 Read Receipt Request for all emails cannot be switched OFF.

I have a strange situation with an Outlook 2010 client using Exchange 2010. The user has Outlook configured so that Under Options/Mail/Tracking - that "Read receipt confirming the recipient has viewed the message" is turned off. Yet everytime she
sends a message, the option to request pops up on the recipient's outlook.
I have tried to toggle the option on and off to no avail. I can switch the Delivery Receipt request on and off and it is no issue.
Can anyone tell me what attribute in ADSIEdit or Exchange is that seems to be stuck ON?

Hi,
I believe you would like to block this only for the user and not for your ORG... ??
Although, you can block this for your entire ORG.
what happens is that the Read receipt contains a "Disposition-Notification-To"
If we get rid of this header we can restrict the receiver to get that prompt.
we can create a Transport rule either for the entire org or for that specific user by making an adjustment in the "exception tab"
for more info refer this blog.
http://blogs.technet.com/b/exchange/archive/2011/02/23/3412028.aspx
Thanks & Regards
John Chris

Why is it when I save an email with attachments, the attachments are not in the saved email?

Does anyone know why it is when you save an email that has images (attachments) when you go to access the file again with the images, they are not in the document?
The box marked "save attachments" is ticked?
I dont understand
Can anyone help?
Thanks

Is this your Apple account or some other mail?
And are they all in the Inbox of your Mail? If so, rebuild the mailbox. If this is huge, it'll take some time.
IF the images are HUGE, it'll take time to download them from the server to your computer. But once done they should remain there without the need to do anything at all (by default they are already saved).
To click the Save button is to save them somewhere on your hard drive ... maybe to offload elsewhere later.
Actually, you could just as easily save them to iPhoto instead of using Mail to look for and view them. Its a much faster viewing process, and you could set them up by dealers, artists, etc. ... or so I think.

Premiere Pro CS4 Export fails with Media Encoder CS4 "Encoding Failed"," Could Not Read From Source.

There has never been a history of Adobe CS3 installation on the brand new MAC Pro I am using prior to installing Master Collection CS4, despite other posts claiming that chief cause of this issue is a previous CS3, Beta or trial installations of previous versions. I simply had a straightforward installation of CS4 and have had trouble since day 1.
I have uninstalled and reinstalled Master CS4 three times, two times with the action script cleaner for CS4. I tried changing Adobe Cache folder locations to alternative drives. I ran shift start many times to correct any inconsistencies and corrected for permissions using disk utilities repeatedly. All updates have been installed and I am still getting the same error when exporting my timeline to Media Encoder CS4, be it a large High Definition project or a small one consisting of few stills.
No matter what presets I chose, the job appears as one of the items in the render qeuee of Media Encoder CS4 and sits there with the status WAITING until i hit Start Queue. When I do, it still says WAITING under Status and at the bottom corner of the window it reads : Loading "project name.prproj" and after an average of about 6 minutes, a yellow caution sign appears. No render whatsoever takes place. When I click on the yellow caution sign, it reads a log of all errors in connection with each job, including the ones that have gone before it. Here is one:
Start of the Error Paste
- Source File:/users/myname/Library/Caches/TemporaryItems/test.prproj
- Output File:/ users/my name/Documetns/Adobe/Premiere Pro/4.0/Sequence 01.mov
- Preset used :NTSC DV
- Video:
- Audio:
- Bitrate:
0 Encoding Time: 00:33:01
Sat Mar 21 17:12:25 2009 : Encoding failed
Could not read from the source. Please check if it has moved or been deleted.
END OF ERROR Paste
Please any gurus out there know how to troubleshoot this damn thing on Mac, I really appreciate it. I have not yet encountered any posts of Mac owners with no previous CS3 installation having this issue. I am in the middle of 3 projects with tight deadlines and need your urgent help. THANK YOU!

Hello There,
I resolved the issue through a simple process of elimination. So simple in fact I wonder how I missed it. Since there has been no history of prior CS3 installation on this machine and every conceivable trick was applied to resolve the problem (refer to my original post earlier in the thread) ending in frustration, the problem had to reside in a factor or series of factors that were only present in this machine. Of the two remaining causes different in compare to other machines, I had to look into the possibility of any hardware and/or software conflicts. After all, this very same installation works perfectly fine on my colleague's Apple Macbook Pro and several Windows machines.
It turns out that I had installed Pro Tools on this machine that comes with all kinds of optional plug-ins in the so called ignition pack. One of these optional plug-ins is called IZOTOPE (three varieties include Spectron, Trash and another one that escapes my mind). They were all lite version licenses that would automatically pop up on their own when you would start a program where they had been residing. One such program where an association existed was indeed the Premiere. An annoying dialogue box directing you to buy the full version when you would start the premiere would refuse to go away. Sometimes it would even start on its own culminating in a a permanent dialogue box.
The cause of the problem was right before my eyes and I had overlooked it. Once uninstalled using IZOTOPE clean uninstaller on step 4, the problem was resolved. Projects are now loading very fast into the AME and encoding begins in earnest. I have never had any issues ever since.
Long story short, if you have any plug-ins specially the ones that are loading upon the start of any program or the ones that reside inside the premiere or the ones that start on their own independently, they could be one of the highly probable causes of this error. I have seen other similar posts complaining of plug in folders inside premiere that needed to be moved to resolve the issue for instance the ones that needed to be moved to AE folders. If you are a plug-in admirer, I would suggest to look into them seriously.
On the side note, many combination and causes may lead to the same error. I am not claiming that this is the solution for everyone.
It must also be noted that I applied the trick of creating a shortcut of Premiere (and naming it exactly as such) and dropped it into the Adobe Dynamic LInk folder (even though this was suggested for windows)and have changed the adobe Cache locations to an alternative folder on a separate drive. I haven't been able to establish conclusively if the latter steps are also essential in fixing the error on MAC but I can confirm that since the latter steps were taken before the uninstalling of Izotope plug-ins and i still had issues, probably uninstalling those plug ins or finding a way to move them to a place where they don't interfere (if you absolutely need to keep them) is the one essential step that solved the problem.
Hope this helps.

Reader Extended forms are broken in Adobe Reader XI

We use Livecycle Server 11.0 to enable saving of forms data in our forms. We are receiveing complaints from people using Reader XI that if they reopen a form they are working on, they get the following message. "This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no loner available".
Is this a known bug with Redaer XI. We have a lot of Licecycle licences and cannot guarantee that users will not use Reader XI.

is the problem specific to Reader 11 ? not experienced on reader 10 ?
you could compare the settings of a working Reader 10.x with Reader 11.x where it throws the exception.
Also ensure that while creating form in designer > File > Form properties> Default PDF render format is set as: Dynamic XML Form.

SCSM - Service Request Area list - modifications not showing for all users

Hi All
As you cant edit the Service Request Area list, i've settled on changing the default display names to better reflect the categories we want for our SR's. The changes i've made are visible in SCSM on my computer (where i made the changes from), however if
i fire up another instance on a different computer - i can only see the defaults. Anyone seen that before? Typically when i make any sort of change to a list item it is visible for all users.
I'm aware that there is a custom MP out there to allow you to have your own SR Area List, however i was not able to get it to work in our environment (link: http://gallery.technet.microsoft.com/Custom-Service-Request-e4d40738/view/Discussions#content)
Any help would be appreciated.
Thanks

Have you made sure that the selected language in both consoles (the one you are editing from and the one you are testing in) are the same?
When editing lists you will only be asked to save changes (be that changing existing values or adding new ones) if they are stored in a sealed MP - which they should be according to best practice.
If you are not asked which MP to save to then you have already "commited yourself" to a specific MP. You could delete this MP (if there is nothing but the list values in it) or delete them one by one using the console. Then when back to square one the console
will once more ask you which MP to save changes to.
http://codebeaver.blogspot.dk/

T61p XP3 with Mat**bleep**a UJ-852 will not read CDs

Got From IBM Certified Used Equipment back in April, and just noticed I can't read CDs. Read alot of problems with the UJ-852 and DVDs, but not the problem I'm (my wife) is having. Machine Type 6457 AK7 with latest BIOS and Controller code. I have the Extended Warranty, but haven't found the right number to call. I can replace the hardware myself, and don't want to send Laptop back.
I sounds as if the Mat**bleep**a hardware has had problems for a while, and I should be able to get some help from Lenovo.
How come they put that drive in there in the first place, knowing it had problems... maybe I wouldn't notice... well, my wife noticed and her temperature is rising fast
Any suggestions??
Regards,
Billl

1-800-426-7378 the DVD should be a CRU so you won't have to send the laptop in
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

I have just put iCloud on my computer this week. I have had multiple issues with it and my computer not working. Thought I worked most of the bugs out with updates etc, but now it will not read my dvd's or audio books. Why is this?

Not sure what to do? My disk drive will not read my dvd's or audio books. Was working fine till I upgraded my comp with Icloud.

I am a very novice user. Here goesl I have a MacBook Pro 2.53 GHz intel Core i5. 4gb 1067 MHz DDR3.
OSX 10.9

Gmail emails with Read Receipt Request are returned as "Not Read"

Similar Messages

Maybe you are looking for