Gnome3 suspend
Hi guys,
When suspending in gnome3, the screen seems to fade out, but then come straight back on again, before finally turning off when the computer suspends.
This occurs on two different computers, one has an ati graphics card the other is a laptop with intel graphics.
I guess this should be submitted as a bug to gnome, but cant seem to find their bug tracker ... lol
Cheers guys
Kane
someone had already reported it:
https://bugzilla.gnome.org/show_bug.cgi?id=646750
Cheers
Kane
Similar Messages
-
Howto suspend with systemd [SOLVED]
Hi All,
I have converted my machines to full systemd including some laptops. ... and am on the whole, very happy with systemd ..
I notice my daughter's laptop (a Samsung N70) sleeps and resumes just fine without any extra work from me ..
However, my Sony vaio laptop just reboots when I use the Gnome3 suspend menu item. Is there something else I can try to get it to suspend?
I presume the Gnome3 suspend is suspend and not hibernate to disk ..
NB: The samsung was installed from a fresh installation, where the Sony has been recently upgraded and converted to systemd.
Thanks,
B
Last edited by bmentink (2012-09-17 04:18:14)First of all, don't presume things - establish the facts. I have no experience with Gnome, so my advice would be to see if 'systemctl suspend' works in a terminal. If it does, then you need to make sure that's what Gnome uses. If it doesn't you have a more fundamental issue, and the information provided by the systemd journal will help you solve it.
-
Lenovo T430 suspend issue (systemd-sleep)
On my Lenovo T430, I'm having a problem with suspend. I use the Gnome3 Suspend option from the menubar. Suspend works successfully only about 50% of the time. When it doesn't work, the screen goes blank and the power button starts a fast blink. The only option then is a hard reboot (long press the power button).
I haven't been able to identify a consistent way to reproduce the problem. Doesn't seem to be related to battery or charging state. Also, doesn't seem to be related to the current running apps.
Here are the last entries from journalctl just before the hard reboot...
Sep 11 09:33:19 mylaptop systemd[1]: Starting Sleep.
Sep 11 09:33:19 mylaptop systemd[1]: Reached target Sleep.
Sep 11 09:33:19 mylaptop systemd[1]: Starting Suspend...
Sep 11 09:33:19 mylaptop systemd-sleep[2807]: Suspending system...
Where else should I be looking for error messages?Hi linhe43,
What operating system are you using?
Which WLAN card do you have?
Are your drivers updated?
Are you using the driver from the Lenovo site or intel site?
Unfortunately, as erceve said, there is no definite fix.
You have to play around with the options to see what combination works.
Here are a few forum threads I've been working on that detail different methods of how to fix the issue.
http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/WiFi-connectivity-issue-ThinkPad-Twist/m-p/104459...
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T430s-no-WLAN/m-p/1044569#M75746
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/About-Intel-WiFi-Link-5300-AGN/m-p/1044501#...
http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/x1-carbon-wireless-problem/m-p/1037723#M47631
http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/Can-t-turn-on-WiFi-on-Windows-8-X131e-3372-2VU...
The issue is currently being worked on.
Try one of the suggestions in these forums in the meantime.
Hope this helps.
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it. -
Gnome3 poweroff / suspend issue -- [patch included]
There's been a debate about the Power Off / Suspend item in gnome-shell. You can only directly shutdown your computer if you press Alt while in the status menu. The default is to suspend.
I think this is crazy. One of the fundamental things you do to your computer is to shut it off. No need to make that difficult.
Here's a patch for gnome-shell;
(/usr/share/gnome-shell/js/ui/statusMenu.js)
http://pastebin.com/kBPi7CW5
If you think others will benefit from it, let me know and I'll file a bug report.
Last edited by vkumar (2011-05-02 03:12:56)IIRC one of the available exensions (see https://wiki.archlinux.org/index.php/GN … xtensions) puts a "Power off" item in that menu.
And yes indeed, believe it, gnome3 has no power off by default. Another thing they don't have by default is any way to pick the font, there's only "small" "medium" and "large", and "larger" under the accessibility settings. But, if you recall the "TweakUI" PowerToy for Windows XP or Windows 98, there's something exactly like that in the main repos, gnome-tweak-tool, that has some of the more blatant missing options, like fonts. -
Gnome3 - disable suspend [solved]
Hi all,
I want to disable suspend from the power management options in gnome. I don't have support for suspend as I don't have a swap partition on purpose. I only want reboot and shutdown as options.
Can I configure this?
I didn't see any settings in gconf-editor that would correlate to this.
Walter
Last edited by walterjwhite (2011-06-08 01:37:19)I got this from somewhere else on the internet, but I'm not sure where anymore. In any case, it works.
To disable suspend and hibernation, add a file named 50-admin.pkla to:
/etc/polkit-1/localauthority/50-local.d
full path as reference: /etc/polkit-1/localauthority/50-local.d/50-admin.pkla
Add the following text to the file and save it. Log out and back in. This will remove suspend and hibernate from the shut down menus
[disable suspend]
Identity=unix-user:*
Action=org.freedesktop.upower.suspend
ResultAny=no
ResultInactive=no
ResultActive=no
[disable hibernate]
Identity=unix-user:*
Action=org.freedesktop.upower.hibernate
ResultAny=no
ResultInactive=no
ResultActive=no -
[solved] gnome3 only in fallback mode
There a few threads dealing with similar problems, but they are rather old. So I decided to open a new topic.
gnome3 only starts in fallback-mode on my notebook (Lenovo TP x61). I cleaned up my xinitrc and use gdm to start gnome, but still no results.
A few outputs:
glxinfo | grep rendering
direct rendering: Yes
glxinfo | grep -i opengl
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 965GM
OpenGL version string: 2.1 Mesa 7.11
OpenGL shading language version string: 1.20
OpenGL extensions:
xorg.0.log
[ 77.813]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 77.813] X Protocol Version 11, Revision 0
[ 77.813] Build Operating System: Linux 3.0-ARCH x86_64
[ 77.813] Current Operating System: Linux Lambert 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64
[ 77.813] Kernel command line: root=/dev/sda3 resume=/dev/sda1 ro i915.modeset=1 quiet
[ 77.813] Build Date: 17 September 2011 07:42:58AM
[ 77.813]
[ 77.813] Current version of pixman: 0.22.2
[ 77.813] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 77.813] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 77.813] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 29 11:42:38 2011
[ 77.814] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 77.814] (==) No Layout section. Using the first Screen section.
[ 77.814] (==) No screen section available. Using defaults.
[ 77.814] (**) |-->Screen "Default Screen Section" (0)
[ 77.814] (**) | |-->Monitor "<default monitor>"
[ 77.814] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 77.814] (==) Automatically adding devices
[ 77.814] (==) Automatically enabling devices
[ 77.815] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 77.815] Entry deleted from font path.
[ 77.815] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 77.815] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 77.815] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 77.815] (II) Loader magic: 0x7d6160
[ 77.815] (II) Module ABI versions:
[ 77.815] X.Org ANSI C Emulation: 0.4
[ 77.815] X.Org Video Driver: 10.0
[ 77.815] X.Org XInput driver : 12.2
[ 77.815] X.Org Server Extension : 5.0
[ 77.816] (--) PCI:*(0:0:2:0) 8086:2a02:17aa:20b5 rev 12, Mem @ 0xf8100000/1048576, 0xe0000000/268435456, I/O @ 0x00001800/8
[ 77.817] (--) PCI: (0:0:2:1) 8086:2a03:17aa:20b5 rev 12, Mem @ 0xf8200000/1048576
[ 77.817] (II) Open ACPI successful (/var/run/acpid.socket)
[ 77.817] (II) LoadModule: "extmod"
[ 77.817] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 77.818] (II) Module extmod: vendor="X.Org Foundation"
[ 77.818] compiled for 1.10.4, module version = 1.0.0
[ 77.818] Module class: X.Org Server Extension
[ 77.818] ABI class: X.Org Server Extension, version 5.0
[ 77.818] (II) Loading extension MIT-SCREEN-SAVER
[ 77.818] (II) Loading extension XFree86-VidModeExtension
[ 77.818] (II) Loading extension XFree86-DGA
[ 77.818] (II) Loading extension DPMS
[ 77.818] (II) Loading extension XVideo
[ 77.818] (II) Loading extension XVideo-MotionCompensation
[ 77.818] (II) Loading extension X-Resource
[ 77.818] (II) LoadModule: "dbe"
[ 77.818] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 77.818] (II) Module dbe: vendor="X.Org Foundation"
[ 77.818] compiled for 1.10.4, module version = 1.0.0
[ 77.818] Module class: X.Org Server Extension
[ 77.818] ABI class: X.Org Server Extension, version 5.0
[ 77.818] (II) Loading extension DOUBLE-BUFFER
[ 77.818] (II) LoadModule: "glx"
[ 77.819] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 77.819] (II) Module glx: vendor="X.Org Foundation"
[ 77.819] compiled for 1.10.4, module version = 1.0.0
[ 77.819] ABI class: X.Org Server Extension, version 5.0
[ 77.819] (==) AIGLX enabled
[ 77.819] (II) Loading extension GLX
[ 77.819] (II) LoadModule: "record"
[ 77.819] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 77.819] (II) Module record: vendor="X.Org Foundation"
[ 77.819] compiled for 1.10.4, module version = 1.13.0
[ 77.819] Module class: X.Org Server Extension
[ 77.819] ABI class: X.Org Server Extension, version 5.0
[ 77.819] (II) Loading extension RECORD
[ 77.819] (II) LoadModule: "dri"
[ 77.820] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 77.820] (II) Module dri: vendor="X.Org Foundation"
[ 77.820] compiled for 1.10.4, module version = 1.0.0
[ 77.820] ABI class: X.Org Server Extension, version 5.0
[ 77.820] (II) Loading extension XFree86-DRI
[ 77.820] (II) LoadModule: "dri2"
[ 77.820] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 77.821] (II) Module dri2: vendor="X.Org Foundation"
[ 77.821] compiled for 1.10.4, module version = 1.2.0
[ 77.821] ABI class: X.Org Server Extension, version 5.0
[ 77.821] (II) Loading extension DRI2
[ 77.821] (==) Matched intel as autoconfigured driver 0
[ 77.821] (==) Matched vesa as autoconfigured driver 1
[ 77.821] (==) Matched fbdev as autoconfigured driver 2
[ 77.821] (==) Assigned the driver to the xf86ConfigLayout
[ 77.821] (II) LoadModule: "intel"
[ 77.821] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 77.821] (II) Module intel: vendor="X.Org Foundation"
[ 77.821] compiled for 1.10.2, module version = 2.15.0
[ 77.821] Module class: X.Org Video Driver
[ 77.821] ABI class: X.Org Video Driver, version 10.0
[ 77.821] (II) LoadModule: "vesa"
[ 77.821] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 77.822] (II) Module vesa: vendor="X.Org Foundation"
[ 77.822] compiled for 1.10.0, module version = 2.3.0
[ 77.822] Module class: X.Org Video Driver
[ 77.822] ABI class: X.Org Video Driver, version 10.0
[ 77.822] (II) LoadModule: "fbdev"
[ 77.822] (WW) Warning, couldn't open module fbdev
[ 77.822] (II) UnloadModule: "fbdev"
[ 77.822] (II) Unloading fbdev
[ 77.822] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 77.822] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 77.824] (II) VESA: driver for VESA chipsets: vesa
[ 77.824] (++) using VT number 7
[ 77.833] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 77.833] (WW) Falling back to old probe method for vesa
[ 77.833] drmOpenDevice: node name is /dev/dri/card0
[ 77.833] drmOpenDevice: open result is 9, (OK)
[ 77.833] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 77.833] drmOpenDevice: node name is /dev/dri/card0
[ 77.833] drmOpenDevice: open result is 9, (OK)
[ 77.833] drmOpenByBusid: drmOpenMinor returns 9
[ 77.833] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 77.833] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 77.834] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 77.834] (==) intel(0): RGB weight 888
[ 77.834] (==) intel(0): Default visual is TrueColor
[ 77.834] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 77.834] (--) intel(0): Chipset: "965GM"
[ 77.834] (**) intel(0): Relaxed fencing enabled
[ 77.834] (**) intel(0): Framebuffer tiled
[ 77.834] (**) intel(0): Pixmaps tiled
[ 77.834] (**) intel(0): 3D buffers tiled
[ 77.834] (**) intel(0): SwapBuffers wait enabled
[ 77.834] (==) intel(0): video overlay key set to 0x101fe
[ 77.834] (II) intel(0): Output LVDS1 has no monitor section
[ 77.834] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 77.853] (II) intel(0): Output VGA1 has no monitor section
[ 77.853] (II) intel(0): EDID for output LVDS1
[ 77.853] (II) intel(0): Manufacturer: LEN Model: 4000 Serial#: 0
[ 77.853] (II) intel(0): Year: 2005 Week: 0
[ 77.853] (II) intel(0): EDID Version: 1.3
[ 77.853] (II) intel(0): Digital Display Input
[ 77.853] (II) intel(0): Max Image Size [cm]: horiz.: 25 vert.: 18
[ 77.853] (II) intel(0): Gamma: 2.20
[ 77.853] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 77.853] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 77.853] (II) intel(0): First detailed timing is preferred mode
[ 77.853] (II) intel(0): redX: 0.569 redY: 0.342 greenX: 0.312 greenY: 0.544
[ 77.853] (II) intel(0): blueX: 0.149 blueY: 0.132 whiteX: 0.313 whiteY: 0.329
[ 77.854] (II) intel(0): Supported established timings:
[ 77.854] (II) intel(0): 640x480@60Hz
[ 77.854] (II) intel(0): 800x600@60Hz
[ 77.854] (II) intel(0): 1024x768@60Hz
[ 77.854] (II) intel(0): Manufacturer's mask: 0
[ 77.854] (II) intel(0): Supported detailed timing:
[ 77.854] (II) intel(0): clock: 54.2 MHz Image Size: 246 x 185 mm
[ 77.854] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 77.854] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
[ 77.854] (II) intel(0): Supported detailed timing:
[ 77.854] (II) intel(0): clock: 43.3 MHz Image Size: 246 x 185 mm
[ 77.854] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 77.854] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
[ 77.854] (II) intel(0): Unknown vendor-specific block f
[ 77.854] (II) intel(0): LTN121XJ-L07
[ 77.854] (II) intel(0): EDID (in hex):
[ 77.854] (II) intel(0): 00ffffffffffff0030ae004000000000
[ 77.854] (II) intel(0): 000f010380191278eaed7591574f8b26
[ 77.854] (II) intel(0): 21505421080001010101010101010101
[ 77.854] (II) intel(0): 01010101010128150040410026301888
[ 77.854] (II) intel(0): 3600f6b900000018ed10004041002630
[ 77.854] (II) intel(0): 18883600f6b9000000180000000f0061
[ 77.854] (II) intel(0): 43326143280f01004ca3584a000000fe
[ 77.854] (II) intel(0): 004c544e313231584a2d4c30370a0000
[ 77.854] (II) intel(0): EDID vendor "LEN", prod id 16384
[ 77.854] (II) intel(0): Printing DDC gathered Modelines:
[ 77.854] (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz)
[ 77.854] (II) intel(0): Modeline "1024x768"x0.0 43.33 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (32.2 kHz)
[ 77.854] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 77.854] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 77.854] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 77.855] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 77.855] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 77.855] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 77.855] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 77.855] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 77.855] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 77.855] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 77.855] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 77.855] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 77.855] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 77.855] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 77.855] (II) intel(0): Printing probed modes for output LVDS1
[ 77.855] (II) intel(0): Modeline "1024x768"x50.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz)
[ 77.855] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 77.855] (II) intel(0): Modeline "1024x768"x40.0 43.33 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (32.2 kHz)
[ 77.855] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 77.855] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 77.855] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 77.855] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 77.873] (II) intel(0): EDID for output VGA1
[ 77.873] (II) intel(0): Output LVDS1 connected
[ 77.873] (II) intel(0): Output VGA1 disconnected
[ 77.873] (II) intel(0): Using exact sizes for initial modes
[ 77.873] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 77.873] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 77.873] (II) intel(0): Kernel page flipping support detected, enabling
[ 77.873] (**) intel(0): Display dimensions: (250, 180) mm
[ 77.873] (**) intel(0): DPI set to (104, 108)
[ 77.873] (II) Loading sub module "fb"
[ 77.873] (II) LoadModule: "fb"
[ 77.873] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 77.874] (II) Module fb: vendor="X.Org Foundation"
[ 77.874] compiled for 1.10.4, module version = 1.0.0
[ 77.874] ABI class: X.Org ANSI C Emulation, version 0.4
[ 77.874] (II) Loading sub module "dri2"
[ 77.874] (II) LoadModule: "dri2"
[ 77.874] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 77.874] (II) Module dri2: vendor="X.Org Foundation"
[ 77.874] compiled for 1.10.4, module version = 1.2.0
[ 77.874] ABI class: X.Org Server Extension, version 5.0
[ 77.874] (II) UnloadModule: "vesa"
[ 77.874] (II) Unloading vesa
[ 77.874] (==) Depth 24 pixmap format is 32 bpp
[ 77.874] (II) intel(0): [DRI2] Setup complete
[ 77.874] (II) intel(0): [DRI2] DRI driver: i965
[ 77.874] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 77.892] (II) UXA(0): Driver registered support for the following operations:
[ 77.892] (II) solid
[ 77.892] (II) copy
[ 77.892] (II) composite (RENDER acceleration)
[ 77.892] (II) put_image
[ 77.892] (II) get_image
[ 77.892] (==) intel(0): Backing store disabled
[ 77.892] (==) intel(0): Silken mouse enabled
[ 77.892] (II) intel(0): Initializing HW Cursor
[ 77.923] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 77.925] (==) intel(0): DPMS enabled
[ 77.925] (==) intel(0): Intel XvMC decoder enabled
[ 77.925] (II) intel(0): Set up textured video
[ 77.925] (II) intel(0): Set up overlay video
[ 77.926] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 77.926] (II) intel(0): direct rendering: DRI2 Enabled
[ 77.926] (==) intel(0): hotplug detection: "enabled"
[ 77.926] (--) RandR disabled
[ 77.926] (II) Initializing built-in extension Generic Event Extension
[ 77.926] (II) Initializing built-in extension SHAPE
[ 77.926] (II) Initializing built-in extension MIT-SHM
[ 77.926] (II) Initializing built-in extension XInputExtension
[ 77.926] (II) Initializing built-in extension XTEST
[ 77.926] (II) Initializing built-in extension BIG-REQUESTS
[ 77.926] (II) Initializing built-in extension SYNC
[ 77.926] (II) Initializing built-in extension XKEYBOARD
[ 77.926] (II) Initializing built-in extension XC-MISC
[ 77.926] (II) Initializing built-in extension SECURITY
[ 77.926] (II) Initializing built-in extension XINERAMA
[ 77.926] (II) Initializing built-in extension XFIXES
[ 77.926] (II) Initializing built-in extension RENDER
[ 77.926] (II) Initializing built-in extension RANDR
[ 77.926] (II) Initializing built-in extension COMPOSITE
[ 77.926] (II) Initializing built-in extension DAMAGE
[ 77.942] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 77.942] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 77.942] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 77.942] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 77.942] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 77.942] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 77.942] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 77.943] (II) intel(0): Setting screen physical size to 270 x 203
[ 78.142] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 78.142] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 78.142] (**) Power Button: Applying InputClass "keyboard"
[ 78.142] (II) LoadModule: "evdev"
[ 78.142] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 78.142] (II) Module evdev: vendor="X.Org Foundation"
[ 78.142] compiled for 1.10.0, module version = 2.6.0
[ 78.142] Module class: X.Org XInput Driver
[ 78.142] ABI class: X.Org XInput driver, version 12.2
[ 78.142] (II) Using input driver 'evdev' for 'Power Button'
[ 78.142] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 78.142] (**) Power Button: always reports core events
[ 78.142] (**) Power Button: Device: "/dev/input/event3"
[ 78.142] (--) Power Button: Found keys
[ 78.143] (II) Power Button: Configuring as keyboard
[ 78.143] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 78.143] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 78.143] (**) Option "xkb_rules" "evdev"
[ 78.143] (**) Option "xkb_model" "evdev"
[ 78.143] (**) Option "xkb_layout" "de"
[ 78.143] (**) Option "xkb_variant" "nodeadkeys"
[ 78.189] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 78.190] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 78.190] (**) Video Bus: Applying InputClass "keyboard"
[ 78.190] (II) Using input driver 'evdev' for 'Video Bus'
[ 78.190] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 78.190] (**) Video Bus: always reports core events
[ 78.190] (**) Video Bus: Device: "/dev/input/event4"
[ 78.190] (--) Video Bus: Found keys
[ 78.190] (II) Video Bus: Configuring as keyboard
[ 78.190] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 78.190] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 78.190] (**) Option "xkb_rules" "evdev"
[ 78.190] (**) Option "xkb_model" "evdev"
[ 78.190] (**) Option "xkb_layout" "de"
[ 78.190] (**) Option "xkb_variant" "nodeadkeys"
[ 78.199] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 78.199] (II) No input driver/identifier specified (ignoring)
[ 78.200] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 78.200] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 78.200] (**) Sleep Button: Applying InputClass "keyboard"
[ 78.200] (II) Using input driver 'evdev' for 'Sleep Button'
[ 78.200] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 78.200] (**) Sleep Button: always reports core events
[ 78.200] (**) Sleep Button: Device: "/dev/input/event2"
[ 78.200] (--) Sleep Button: Found keys
[ 78.200] (II) Sleep Button: Configuring as keyboard
[ 78.200] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 78.200] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 78.200] (**) Option "xkb_rules" "evdev"
[ 78.200] (**) Option "xkb_model" "evdev"
[ 78.201] (**) Option "xkb_layout" "de"
[ 78.201] (**) Option "xkb_variant" "nodeadkeys"
[ 78.206] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 78.206] (II) No input driver/identifier specified (ignoring)
[ 78.215] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 78.215] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 78.215] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[ 78.215] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 78.215] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 78.215] (**) AT Translated Set 2 keyboard: always reports core events
[ 78.215] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 78.215] (--) AT Translated Set 2 keyboard: Found keys
[ 78.215] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 78.215] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 78.215] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 78.215] (**) Option "xkb_rules" "evdev"
[ 78.215] (**) Option "xkb_model" "evdev"
[ 78.215] (**) Option "xkb_layout" "de"
[ 78.215] (**) Option "xkb_variant" "nodeadkeys"
[ 78.216] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8)
[ 78.216] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 78.216] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 78.216] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 78.216] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 78.216] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 78.217] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 78.217] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
[ 78.217] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 78.217] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 78.217] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 78.217] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 78.217] (**) Option "Emulate3Buttons" "false"
[ 78.217] (**) Option "EmulateWheel" "true"
[ 78.217] (**) Option "EmulateWheelButton" "2"
[ 78.217] (**) Option "YAxisMapping" "4 5"
[ 78.217] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 78.217] (**) Option "XAxisMapping" "6 7"
[ 78.217] (**) TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 78.217] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 78.217] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 78.217] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[ 78.217] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 78.217] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 78.217] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 78.217] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 78.217] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 78.218] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
[ 78.218] (II) No input driver/identifier specified (ignoring)
[ 78.218] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 78.218] (II) No input driver/identifier specified (ignoring)
[ 78.220] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[ 78.220] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 78.220] (**) ThinkPad Extra Buttons: Applying InputClass "keyboard"
[ 78.220] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 78.220] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 78.220] (**) ThinkPad Extra Buttons: always reports core events
[ 78.220] (**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
[ 78.220] (--) ThinkPad Extra Buttons: Found keys
[ 78.220] (II) ThinkPad Extra Buttons: Configuring as keyboard
[ 78.220] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event6"
[ 78.220] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[ 78.220] (**) Option "xkb_rules" "evdev"
[ 78.220] (**) Option "xkb_model" "evdev"
[ 78.220] (**) Option "xkb_layout" "de"
[ 78.220] (**) Option "xkb_variant" "nodeadkeys"
[ 78.247] (II) intel(0): EDID vendor "LEN", prod id 16384
[ 78.247] (II) intel(0): Printing DDC gathered Modelines:
[ 78.247] (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz)
[ 78.247] (II) intel(0): Modeline "1024x768"x0.0 43.33 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (32.2 kHz)
[ 78.247] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 78.247] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 78.247] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 78.543] (II) intel(0): EDID vendor "LEN", prod id 16384
[ 78.543] (II) intel(0): Printing DDC gathered Modelines:
[ 78.543] (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz)
[ 78.543] (II) intel(0): Modeline "1024x768"x0.0 43.33 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (32.2 kHz)
[ 78.543] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 78.543] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 78.543] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 78.561] (II) intel(0): EDID vendor "LEN", prod id 16384
[ 78.561] (II) intel(0): Printing DDC gathered Modelines:
[ 78.561] (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz)
[ 78.561] (II) intel(0): Modeline "1024x768"x0.0 43.33 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (32.2 kHz)
[ 78.561] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 78.561] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 78.561] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 78.581] (II) intel(0): EDID vendor "LEN", prod id 16384
[ 78.581] (II) intel(0): Printing DDC gathered Modelines:
[ 78.581] (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz)
[ 78.581] (II) intel(0): Modeline "1024x768"x0.0 43.33 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (32.2 kHz)
[ 78.581] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 78.581] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 78.581] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 78.606] (II) intel(0): EDID vendor "LEN", prod id 16384
[ 78.606] (II) intel(0): Printing DDC gathered Modelines:
[ 78.606] (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz)
[ 78.606] (II) intel(0): Modeline "1024x768"x0.0 43.33 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (32.2 kHz)
[ 78.606] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 78.606] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 78.606] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 80.456] (II) AIGLX: Suspending AIGLX clients for VT switch
Thank you for your help!
Last edited by tyr0 (2011-09-29 14:14:31)So I thought since gnome 32 is not in extra it would work. So I upgraded but still same issue.
Gnome xession-errors
Client()@/usr/share/gnome-shell/js/ui/telepathyClient.js:77
_createUserSession()@/usr/share/gnome-shell/js/ui/main.js:84
start()@/usr/share/gnome-shell/js/ui/main.js:223
@<main>:1
JS ERROR: !!! message = '"this._accountManager.get_factory is not a function"'
Window manager warning: Log level 32: Execution of main.js threw exception: TypeError: this._accountManager.get_factory is not a function
(nm-applet:1923): libnotify-WARNING **: Failed to connect to proxy
gnome-shell-calendar-server[1943]: Got HUP on stdin - exiting
JS ERROR: !!! Exception was: TypeError: this._accountManager.get_factory is not a function
JS ERROR: !!! lineNumber = '124'
JS ERROR: !!! fileName = '"/usr/share/gnome-shell/js/ui/telepathyClient.js"'
JS ERROR: !!! stack = '"()@/usr/share/gnome-shell/js/ui/telepathyClient.js:124
Client()@/usr/share/gnome-shell/js/ui/telepathyClient.js:77
_createUserSession()@/usr/share/gnome-shell/js/ui/main.js:84
start()@/usr/share/gnome-shell/js/ui/main.js:223
@<main>:1
JS ERROR: !!! message = '"this._accountManager.get_factory is not a function"'
Window manager warning: Log level 32: Execution of main.js threw exception: TypeError: this._accountManager.get_factory is not a function
gnome-session[1850]: WARNING: App 'gnome-shell.desktop' respawning too quickly
gnome-shell-calendar-server[1971]: Got HUP on stdin - exiting
(gnome-settings-daemon:1876): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
[1317510232,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application
(nm-applet:1923): Gdk-WARNING **: nm-applet: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
(gnome-screensaver:1922): Gdk-WARNING **: gnome-screensaver: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
(gdu-notification-daemon:1926): Gdk-WARNING **: gdu-notification-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
(evolution-alarm-notify:1924): Gdk-WARNING **: evolution-alarm-notify: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
Client()@/usr/share/gnome-shell/js/ui/telepathyClient.js:77
_createUserSession()@/usr/share/gnome-shell/js/ui/main.js:84
start()@/usr/share/gnome-shell/js/ui/main.js:223
@<main>:1
JS ERROR: !!! message = '"this._accountManager.get_factory is not a function"'
Window manager warning: Log level 32: Execution of main.js threw exception: TypeError: this._accountManager.get_factory is not a function
(nm-applet:1923): libnotify-WARNING **: Failed to connect to proxy
gnome-shell-calendar-server[1943]: Got HUP on stdin - exiting
JS ERROR: !!! Exception was: TypeError: this._accountManager.get_factory is not a function
JS ERROR: !!! lineNumber = '124'
JS ERROR: !!! fileName = '"/usr/share/gnome-shell/js/ui/telepathyClient.js"'
JS ERROR: !!! stack = '"()@/usr/share/gnome-shell/js/ui/telepathyClient.js:124
Client()@/usr/share/gnome-shell/js/ui/telepathyClient.js:77
_createUserSession()@/usr/share/gnome-shell/js/ui/main.js:84
start()@/usr/share/gnome-shell/js/ui/main.js:223
@<main>:1
JS ERROR: !!! message = '"this._accountManager.get_factory is not a function"'
Window manager warning: Log level 32: Execution of main.js threw exception: TypeError: this._accountManager.get_factory is not a function
gnome-session[1850]: WARNING: App 'gnome-shell.desktop' respawning too quickly
gnome-shell-calendar-server[1971]: Got HUP on stdin - exiting
(gnome-settings-daemon:1876): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
[1317510232,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application
(nm-applet:1923): Gdk-WARNING **: nm-applet: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
(gnome-screensaver:1922): Gdk-WARNING **: gnome-screensaver: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
(gdu-notification-daemon:1926): Gdk-WARNING **: gdu-notification-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
(evolution-alarm-notify:1924): Gdk-WARNING **: evolution-alarm-notify: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
Last edited by Zyclone (2011-10-01 23:10:30) -
Gnome 3.2 suspend with status menu: screen is not locked after wakeup
Locking the screen with gnome-screensaver-command --lock or with the lock screen option from the status menu works fine.
However, when the suspend from the status menu is used, although it does seem to go into lock mode before it suspends (the screen goes black and there is a little lock icon in to top corner), it never asks for a password after it wakes up. This happens on both my laptops with gnome3 by the way.
The wiki article https://wiki.archlinux.org/index.php/Gn … ter_resume tells me to use
# gsettings set org.gnome.power-manager lock-use-screensaver 'false'
But that key doesn't exist in gnome 3.2.
Any ideas ?In the meantime I found the following:
- When I suspend with the power button, the screen is locked, but not when I use the status menu option
- This seems to be related to the screen setting 'Lock screen after'. I had it set to 1 minutes. When I change it to 'after the screen goes blank' the
problem doesn't seem to occur.
So, the way it looks now, it uses the same settings for delaying the locking the screen after the screensaver kicks in when locking the screen before suspend.
Which doesn't make much sense. And then the behaviour is still inconsistent with the power button suspend. -
Wrong keyboard-layout after suspend
Hej,
when I put my Thinkpad T400 to sleep (by closing the lid), it recovers from suspend with an english keyboard layout. I have to do a "setxkbmap de" manually everytime.
Running this from /usr/lib/pm-utils/sleep.d/ delivers a "Can't open "default display"" error in the logfile and other than that has no effect.
any ideas anyone?
I am using gnome3, if that is of any importance.
thanksHi,
two things I can think off:
1. Check if you have set your keyboard in xorg.conf as described here: https://wiki.archlinux.org/index.php/Be … S_keyboard
2. Open dconf-editor, surf there to org.gnome.libgnomekbd.keyboard
I have Layout set to ['de\tnodeadkeys'] there. -
DBUS error seems to prevent proper Gnome3.2 startup
Hi everyone,
I've been unable to start Gnome3.2 ever since it first came out. Here's my X error log:
X.Org X Server 1.10.4
Release Date: 2011-08-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0-ARCH x86_64
Current Operating System: Linux blackbriar 2.6.32-lts #1 SMP Tue Aug 30 08:59:44 CEST 2011 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=UUID=e09c380a-ed57-49b8-82ef-125ddd407ac4 ro quiet
Build Date: 17 September 2011 07:42:58AM
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 2 14:31:16 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
FATAL: Module fbcon not found.
xmodmap: commandline:1: bad add modifier name 'caps_lock', not allowed
xmodmap: 1 error encountered, aborting.
xset: unknown option +ft
usage: xset [-display host:dpy] option ...
To turn bell off:
-b b off b 0
To set bell volume, pitch and duration:
b [vol [pitch [dur]]] b on
To disable bug compatibility mode:
-bc
To enable bug compatibility mode:
bc
To turn keyclick off:
-c c off c 0
To set keyclick volume:
c [0-100] c on
To control Energy Star (DPMS) features:
-dpms Energy Star features off
+dpms Energy Star features on
dpms [standby [suspend [off]]]
force standby
force suspend
force off
force on
(also implicitly enables DPMS features)
a timeout value of zero disables the mode
To set the font path:
fp= path[,path...]
To restore the default font path:
fp default
To have the server reread font databases:
fp rehash
To remove elements from font path:
-fp path[,path...] fp- path[,path...]
To prepend or append elements to font path:
+fp path[,path...] fp+ path[,path...]
To set LED states off or on:
-led [1-32] led off
led [1-32] led on
-led named 'name' led off
led named 'name' led on
To set mouse acceleration and threshold:
m [acc_mult[/acc_div] [thr]] m default
To set pixel colors:
p pixel_value color_name
To turn auto-repeat off or on:
-r [keycode] r off
r [keycode] r on
r rate [delay [rate]]
For screen-saver control:
s [timeout [cycle]] s default s on
s blank s noblank s off
s expose s noexpose
s activate s reset
For status information: q
gnome-session[1704]: EggSMClient-WARNING: Desktop file '/home/bow/.config/autostart/dropbox.desktop' has malformed Icon key 'dropbox.png'(should not include extension)
** (gnome-settings-daemon:1719): WARNING **: /usr/lib/gnome-settings-daemon-3.0/libcolor.so: cannot open shared object file: No such file or directory
** (gnome-settings-daemon:1719): WARNING **: Cannot load plugin 'Color' since file '/usr/lib/gnome-settings-daemon-3.0/libcolor.so' cannot be read.
** (gnome-settings-daemon:1719): WARNING **: Error activating plugin 'Color'
GNOME_KEYRING_CONTROL=/tmp/keyring-r39ZPd
GNOME_KEYRING_PID=1726
GNOME_KEYRING_CONTROL=/tmp/keyring-r39ZPd
GNOME_KEYRING_CONTROL=/tmp/keyring-r39ZPd
SSH_AUTH_SOCK=/tmp/keyring-r39ZPd/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-r39ZPd
SSH_AUTH_SOCK=/tmp/keyring-r39ZPd/ssh
GPG_AGENT_INFO=/tmp/keyring-r39ZPd/gpg:0:1
WARNING: no socket to connect to
common-plugin-Message: checking whether we have a device for 4: yes
common-plugin-Message: checking whether we have a device for 5: yes
common-plugin-Message: checking whether we have a device for 12: no
common-plugin-Message: checking whether we have a device for 11: no
common-plugin-Message: checking whether we have a device for 10: no
common-plugin-Message: checking whether we have a device for 9: no
common-plugin-Message: checking whether we have a device for 8: no
common-plugin-Message: checking whether we have a device for 7: no
common-plugin-Message: checking whether we have a device for 6: no
gnome-session[1704]: WARNING: Application 'gnome-shell.desktop' failed to register before timeout
Failed to play sound: File or data not found
listen: bind to '0.0.0.0:6600' failed: Address already in use (continuing anyway, because binding to '[::]:6600' succeeded)
daemon: cannot init supplementary groups of user "bow": Operation not permitted
** Message: applet now removed from the notification area
(nm-applet:1959): libnotify-WARNING **: Failed to connect to proxy
(empathy:1957): libnotify-WARNING **: Failed to connect to proxy
Traceback (most recent call last):
File "/usr/lib/guake/guake.py", line 1353, in <module>
if not main():
File "/usr/lib/guake/guake.py", line 1296, in main
instance = Guake()
File "/usr/lib/guake/guake.py", line 649, in __init__
notification.show()
glib.GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Notifications was not provided by any .service files
(empathy:1957): folks-WARNING **: Error preparing Backend 'telepathy': Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[dix] couldn't enable device 10
JS LOG: GNOME Shell started at Sun Oct 02 2011 14:33:03 GMT+0200 (CEST)
** Message: applet now embedded in the notification area
(gnome-settings-daemon:1719): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
[1317558687,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application
xinit: connection to X server lost
waiting for X server to shut down
I have no idea what's wrong there. It looks like it's DBUS, but I'm not sure myself. I've waited a few days for new updates of Gnome3.2, but so far nothing's changed on my end.
If it helps, this is my pacman -Qm
aacgain-cvs 20101003-1
bug-buddy 2.32.0-1
chromium-stable-libpdf 14.0.835.186-1
culmus 0.120-1
dropbox 1.1.45-1
drush 4.5-1
easymp3gain-gtk2 0.5.0-4
evolution-webcal 2.32.0-1
fam 2.7.0-16
font-arhangai 20030401-3
jdk 7-3
jigdo 0.7.3-2
jre 7-3
mendeleydesktop 1.0.1-2
nautilus-dropbox 0.6.9-2
newlan 1.0.0.8-3
os-prober 1.49-3
otf-ipafont 003.03-1
packer 20110826-1
perl-gtk2-imageview 0.05-2
perl-proc-processtable 0.45-2
prey-tracker 0.5.3-1
pyroom-bzr 213-1
scrobby-git 20110905-1
tp_smapi 0.41-1
ttf-droid-sans 1.0-1
ttf-inconsolata-g 20090213-1
ttf-ms-fonts 2.0-8
ttf-sil-scheherazade 1.005-2
ttf-ubuntu-font-family 0.80-1
ttf-vista-fonts 1-3
vidalia 0.2.14-1
And I've also removed all custom extensions of Gnome3.2, all to no avail.
What should I do?wonder:
Ah shoot, that's the previous error.log , I'm sorry. I've saved too many error logs now already, it's getting out of hand. This is the correct one:
X.Org X Server 1.11.1
Release Date: 2011-09-24
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0-ARCH x86_64
Current Operating System: Linux blackbriar 2.6.32-lts #1 SMP Tue Aug 30 08:59:44 CEST 2011 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=UUID=e09c380a-ed57-49b8-82ef-125ddd407ac4 ro quiet
Build Date: 10 October 2011 08:55:30AM
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 12 21:01:19 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
FATAL: Module fbcon not found.
xmodmap: commandline:1: bad add modifier name 'caps_lock', not allowed
xmodmap: 1 error encountered, aborting.
xset: unknown option +ft
usage: xset [-display host:dpy] option ...
To turn bell off:
-b b off b 0
To set bell volume, pitch and duration:
b [vol [pitch [dur]]] b on
To disable bug compatibility mode:
-bc
To enable bug compatibility mode:
bc
To turn keyclick off:
-c c off c 0
To set keyclick volume:
c [0-100] c on
To control Energy Star (DPMS) features:
-dpms Energy Star features off
+dpms Energy Star features on
dpms [standby [suspend [off]]]
force standby
force suspend
force off
force on
(also implicitly enables DPMS features)
a timeout value of zero disables the mode
To set the font path:
fp= path[,path...]
To restore the default font path:
fp default
To have the server reread font databases:
fp rehash
To remove elements from font path:
-fp path[,path...] fp- path[,path...]
To prepend or append elements to font path:
+fp path[,path...] fp+ path[,path...]
To set LED states off or on:
-led [1-32] led off
led [1-32] led on
-led named 'name' led off
led named 'name' led on
To set mouse acceleration and threshold:
m [acc_mult[/acc_div] [thr]] m default
To set pixel colors:
p pixel_value color_name
To turn auto-repeat off or on:
-r [keycode] r off
r [keycode] r on
r rate [delay [rate]]
For screen-saver control:
s [timeout [cycle]] s default s on
s blank s noblank s off
s expose s noexpose
s activate s reset
For status information: q
gnome-session[2449]: WARNING: Session 'gnome' runnable check failed: Timed out
GNOME_KEYRING_CONTROL=/tmp/keyring-BVlgYc
GPG_AGENT_INFO=/tmp/keyring-BVlgYc/gpg:0:1
GNOME_KEYRING_PID=2468
GNOME_KEYRING_CONTROL=/tmp/keyring-BVlgYc
GPG_AGENT_INFO=/tmp/keyring-BVlgYc/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-BVlgYc
GPG_AGENT_INFO=/tmp/keyring-BVlgYc/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-BVlgYc
GPG_AGENT_INFO=/tmp/keyring-BVlgYc/gpg:0:1
SSH_AUTH_SOCK=/tmp/keyring-BVlgYc/ssh
WARNING: no socket to connect to
common-plugin-Message: checking whether we have a device for 4: yes
common-plugin-Message: checking whether we have a device for 5: yes
common-plugin-Message: checking whether we have a device for 12: no
common-plugin-Message: checking whether we have a device for 11: no
common-plugin-Message: checking whether we have a device for 10: no
common-plugin-Message: checking whether we have a device for 9: no
common-plugin-Message: checking whether we have a device for 8: no
common-plugin-Message: checking whether we have a device for 7: no
common-plugin-Message: checking whether we have a device for 6: no
Initializing tracker-miner-fs...
Initializing tracker-store...
Tracker-Message: Setting up monitor for changes to config file:'/home/bow/.config/tracker/tracker-miner-fs.cfg'
Starting log:
File:'/home/bow/.local/share/tracker/tracker-miner-fs.log'
Tracker-Message: Setting up monitor for changes to config file:'/home/bow/.config/tracker/tracker-store.cfg'
Tracker-Message: Setting up monitor for changes to config file:'/home/bow/.config/tracker/tracker-store.cfg'
Starting log:
File:'/home/bow/.local/share/tracker/tracker-store.log'
Failed to play sound: File or data not found
Failed to bind to '[::]:6600': Address already in use
** Message: applet now removed from the notification area
** (gnome-fallback-mount-helper:2545): DEBUG: Starting automounting manager
** (gnome-fallback-mount-helper:2545): DEBUG: ScreenSaver name vanished
** (gnome-fallback-mount-helper:2545): DEBUG: ScreenSaver name appeared
** (gnome-screensaver:2546): WARNING **: Config key not handled: disable-application-handlers
** (gnome-screensaver:2546): WARNING **: Config key not handled: disable-command-line
** (gnome-screensaver:2546): WARNING **: Config key not handled: disable-log-out
** (gnome-screensaver:2546): WARNING **: Config key not handled: disable-print-setup
** (gnome-screensaver:2546): WARNING **: Config key not handled: disable-printing
** (gnome-screensaver:2546): WARNING **: Config key not handled: disable-save-to-disk
** (gnome-fallback-mount-helper:2545): DEBUG: ScreenSaver proxy ready
** (gnome-fallback-mount-helper:2545): DEBUG: Screensaver GetActive() returned 0
** (gnome-fallback-mount-helper:2545): DEBUG: Found ConsoleKit session at path /org/freedesktop/ConsoleKit/Session4
** (gnome-fallback-mount-helper:2545): DEBUG: ConsoleKit session is active 0
** (notification-daemon:2517): DEBUG: Adding id 1
** Message: applet now embedded in the notification area
(empathy:2509): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -23 and height 32
(nm-applet:2512): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -8 and height 32
** (gnome-fallback-mount-helper:2545): DEBUG: ConsoleKit session is active 1
[dix] couldn't enable device 10
** (notification-daemon:2517): DEBUG: Bubble destroyed
** (notification-daemon:2517): DEBUG: No queued notifications
(tracker-miner-fs:2513): Tracker-WARNING **: Couldn't properly parse desktop file 'file:///usr/share/applications/brasero-nautilus.desktop': 'Desktop file doesn't contain type'
** (gnome-fallback-mount-helper:2545): DEBUG: ConsoleKit session is active 0
** (gnome-fallback-mount-helper:2545): DEBUG: ConsoleKit session is active 1
No backlights were found on your system
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-WARNING **: The maximum number of monitors to set (7692) has been reached, not adding any new ones
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
GLib-GIO-ERROR **: Creating pipes for GWakeup: Too many open files
No backlights were found on your system
No backlights were found on your system
No backlights were found on your system
(exe:3323): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(chromium:3025): GdkPixbuf-CRITICAL **: gdk_pixbuf_new_from_data: assertion `width > 0' failed
[3025:3025:909905557:ERROR:browser_main.cc(1022)] Gdk: IA__gdk_cursor_new_from_pixbuf: assertion `GDK_IS_PIXBUF (pixbuf)' failed
[3025:3025:909905591:ERROR:browser_main.cc(1022)] GLib-GObject: g_object_unref: assertion `G_IS_OBJECT (object)' failed
No backlights were found on your system
No backlights were found on your system
(exe:3323): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
No backlights were found on your system
PolicyKit daemon disconnected from the bus.
We are no longer a registered authentication agent.
** Message: NM disappeared
** Message: applet now removed from the notification area
** Message: Got disconnected from the system message bus; retrying to reconnect every 10 seconds
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
(gnome-settings-daemon:3800): libupower-glib-WARNING **: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
(gedit:3277): GVFS-RemoteVolumeMonitor-WARNING **: Owner :1.36 of volume monitor org.gtk.Private.GduVolumeMonitor disconnected from the bus; removing drives/volumes/mounts
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
(gnome-panel:2500): GVFS-RemoteVolumeMonitor-WARNING **: Owner :1.36 of volume monitor org.gtk.Private.GduVolumeMonitor disconnected from the bus; removing drives/volumes/mounts
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
gnome-session[2449]: WARNING: Application 'gnome-settings-daemon.desktop' killed by signal
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
** (notification-daemon:2517): DEBUG: Notification closed - removing from queue
** (notification-daemon:2517): DEBUG: Removing id 1
gnome-session[2449]: WARNING: Unable to determine session: Unable to find session for cookie
gnome-session[2449]: WARNING: Unable to determine session: Unable to find session for cookie
gnome-session[2449]: WARNING: Unable to determine session: Unable to find session for cookie
gnome-session[2449]: WARNING: Unable to determine session: Unable to find session for cookie
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
xinit: connection to X server lost
waiting for X server to shut down Check failed: g_shutdown_pipe_write_fd != -1
Received signal:1->'Hangup'g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Received signal:15->'Terminated'
OK
[3025:3025:1518677681:ERROR:browser_main_gtk.cc(75)] X IO Error detected
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Server terminated successfully (0). Closing log file.
I tried doing it again (startx), after that last fallback session, it didn't work. So now I'm back to the background-only view.
Here's my .xinitrc
xsetroot -cursor_name left_ptr
xmodmap -e "remove Lock = Caps_Lock"
xmodmap -e "keysym Caps_Lock = Escape"
xmodmap -e "add Caps_Lock = Escape"
xset +ft /usr/share/fonts/local
xset fp rehash
exec ck-launch-session gnome-session
toad: Here's my rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Amsterdam"
KEYMAP="us"
CONSOLEFONT="ter-116n"
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(vboxdrv vboxnetadp vboxnetflt tp_smapi)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="blackbriar"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
#WIRELESS_INTERFACE="wlan0"
#WIRED_INTERFACE="eth0"
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus acpid networkmanager netfs crond @httpd) -
[Solved] Asus 1215N - Freeze, crash when Suspend or Normal Use
Hello everyone,
I have installed Arch Linux i686 as always on my Asus 1215N. And, even before install any of the "problematic" applications needed for a full experience on this netbook, like acpi_call and bumblebee my pc start to became slow and then freeze just by using it, kernel panic at a random time, and something he doesn't Suspend/Reboot/Shutdown...
There is my configuration :
Asus 1215N - 2Gb Ram
Arch Linux (Updated) i686
Xfce 4.8 and Slim
Kernel 3.1.1-1-ARCH
Here is an example of my /var/log/error.log when one of the problems appear :
http://pastebin.com/t2hTkBnr
Here is an example of my /var/log/kernel.log when one of the problems appear (This one is by using acpi_call):
http://pastebin.com/FvNNxG3X
Some usefull informations :
The problem doesn't seem to occur while using Gnome3 or Kde4.
My girlfriend as an Asus 1015HA (without Nvidia ION), and since the last kernel (?) update, she start to have the same problem using slim and openbox.
So I thinks this can be caused by Slim, ConsoleKit, DBUS or anything related to the Intel drivers... but it is just an opinion.
Thanks in Advance for the help (It is really boring I've even tought to come back to Ubuntu :S...)
Luis Da Costa
Last edited by aliasbody (2011-11-29 17:11:08)The problem as been mysteriously solved by updating the kernel :S... Weird though...
I have checked the cpu temperature... very high only when the NVIDIA is activated... other than that it is a non-hot laptop ^^
Thanks in Advance -
Graphics corruption after waking from suspend
The image above shows what it looks like. The good news is that there's a process that restores it back to normal: I go to display settings and rotate the view then choose to restore previous setting when asked. Then i restart gnome-shell and everything is clean again.
The problem shows up consistently after suspend and sometimes when booting.
Any advice here is appreciated.AurosGamma wrote:If you are using the nvidia binary driver replace it with nouveau. Gnome 3 doesn't support nvidia binary drivers at all.
I am running a radeon x300 with the drivers xf86-video-ati 6.14.1-1 and ati-dri 7.10.2-2.
jib2 wrote:It"s a known problem. See https://bbs.archlinux.org/viewtopic.php?id=118077
That thread seems limited to nvidia cards and mine is ati. The downgrade of gnome-power-management suggested there did not work for me and I could not find the org.gnome.power-manager.lock-suspend option in gconf-editor.
Please note that I had posted a similar problem last year which I solved by downgrading to older drivers but gnome3 does not work with these. -
Resume from suspend not working anymore
Hello,
until a couple of months suspending and resuming on my system worked flawlessly. Then something happend (I can't remember what I did - system update or a new package most probably) and I didn't have time then to trace.
I'm running 64-bit archlinux on a SandyBridge i3 processor with onboard graphics and using Gnome3.
As I was trying to gather some information I found that actually sudo pm-suspend works (when suspending and resuming from a virtual console). When I try to get back to Gnome with Alt + F7 or sudo gdm (if gnome was not running) the system hangs and I must force shutdown with the power button.
As I am out of ideas and I don't have any experience at tracking errors, can anyone suggest what should I do next?
Thanks in advanceThanks for your quick reply!!
1) I didn't find anything weird in dmesg.log (or I don't know what to look for)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.9-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Aug 15 18:59:31 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/e1084449-2e1e-4073-b8ce-1cccb4558de0 rootfstype=ext4 ro add_efi_memmap
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000aed8a000 (usable)
[ 0.000000] BIOS-e820: 00000000aed8a000 - 00000000aeddc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aeddc000 - 00000000aee08000 (reserved)
[ 0.000000] BIOS-e820: 00000000aee08000 - 00000000aee09000 (usable)
[ 0.000000] BIOS-e820: 00000000aee09000 - 00000000aee0c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aee0c000 - 00000000aee0d000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000aee0d000 - 00000000aee17000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aee17000 - 00000000aee3c000 (reserved)
[ 0.000000] BIOS-e820: 00000000aee3c000 - 00000000aee7f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aee7f000 - 00000000af000000 (usable)
[ 0.000000] BIOS-e820: 00000000af800000 - 00000000bfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.00 by American Megatrends
[ 0.000000] efi: SMBIOS=0xaee3ac98 ACPI=0xaedd4000 ACPI 2.0=0xaedd4000 MPS=0xfcbc0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x0000000000077000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x0000000000077000-0x0000000000078000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000078000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000435000) (3MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000435000-0x0000000001000000) (11MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem07: type=4, attr=0xf, range=[0x0000000001100000-0x0000000001338000) (2MB)
[ 0.000000] efi: mem08: type=3, attr=0xf, range=[0x0000000001338000-0x000000000133a000) (0MB)
[ 0.000000] efi: mem09: type=4, attr=0xf, range=[0x000000000133a000-0x0000000001351000) (0MB)
[ 0.000000] efi: mem10: type=3, attr=0xf, range=[0x0000000001351000-0x0000000001355000) (0MB)
[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x0000000001355000-0x0000000001383000) (0MB)
[ 0.000000] efi: mem12: type=3, attr=0xf, range=[0x0000000001383000-0x000000000138b000) (0MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x000000000138b000-0x000000000138c000) (0MB)
[ 0.000000] efi: mem14: type=3, attr=0xf, range=[0x000000000138c000-0x0000000001395000) (0MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000001395000-0x000000000139d000) (0MB)
[ 0.000000] efi: mem16: type=3, attr=0xf, range=[0x000000000139d000-0x000000000139e000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x000000000139e000-0x00000000013a0000) (0MB)
[ 0.000000] efi: mem18: type=3, attr=0xf, range=[0x00000000013a0000-0x00000000013a4000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000013a4000-0x00000000013aa000) (0MB)
[ 0.000000] efi: mem20: type=3, attr=0xf, range=[0x00000000013aa000-0x00000000013ab000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000013ab000-0x00000000013b7000) (0MB)
[ 0.000000] efi: mem22: type=3, attr=0xf, range=[0x00000000013b7000-0x00000000013b9000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000013b9000-0x00000000013bf000) (0MB)
[ 0.000000] efi: mem24: type=3, attr=0xf, range=[0x00000000013bf000-0x00000000013c7000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000013c7000-0x00000000013e3000) (0MB)
[ 0.000000] efi: mem26: type=3, attr=0xf, range=[0x00000000013e3000-0x00000000013fa000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000013fa000-0x000000000178a000) (3MB)
[ 0.000000] efi: mem28: type=3, attr=0xf, range=[0x000000000178a000-0x000000000178b000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x000000000178b000-0x000000000178e000) (0MB)
[ 0.000000] efi: mem30: type=3, attr=0xf, range=[0x000000000178e000-0x0000000001790000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000001790000-0x0000000001792000) (0MB)
[ 0.000000] efi: mem32: type=3, attr=0xf, range=[0x0000000001792000-0x0000000001793000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000001793000-0x00000000017b1000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000017b1000-0x00000000017cc000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x00000000017cc000-0x00000000017d4000) (0MB)
[ 0.000000] efi: mem36: type=3, attr=0xf, range=[0x00000000017d4000-0x00000000017d6000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x00000000017d6000-0x00000000017d8000) (0MB)
[ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x00000000017d8000-0x00000000017da000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x00000000017da000-0x00000000017de000) (0MB)
[ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x00000000017de000-0x00000000017e1000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x00000000017e1000-0x00000000017e5000) (0MB)
[ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x00000000017e5000-0x00000000017e7000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x00000000017e7000-0x00000000017ea000) (0MB)
[ 0.000000] efi: mem44: type=3, attr=0xf, range=[0x00000000017ea000-0x00000000017ec000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x00000000017ec000-0x00000000017f7000) (0MB)
[ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x00000000017f7000-0x00000000017f9000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x00000000017f9000-0x00000000017fc000) (0MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000017fc000-0x0000000001804000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x0000000001804000-0x000000000180c000) (0MB)
[ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x000000000180c000-0x000000000180d000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x000000000180d000-0x000000000180e000) (0MB)
[ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x000000000180e000-0x0000000001813000) (0MB)
[ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x0000000001813000-0x0000000001819000) (0MB)
[ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x0000000001819000-0x000000000181b000) (0MB)
[ 0.000000] efi: mem55: type=4, attr=0xf, range=[0x000000000181b000-0x000000000181d000) (0MB)
[ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x000000000181d000-0x0000000001821000) (0MB)
[ 0.000000] efi: mem57: type=4, attr=0xf, range=[0x0000000001821000-0x0000000001824000) (0MB)
[ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x0000000001824000-0x0000000001831000) (0MB)
[ 0.000000] efi: mem59: type=4, attr=0xf, range=[0x0000000001831000-0x0000000001860000) (0MB)
[ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x0000000001860000-0x0000000001875000) (0MB)
[ 0.000000] efi: mem61: type=4, attr=0xf, range=[0x0000000001875000-0x000000000188f000) (0MB)
[ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x000000000188f000-0x000000000189a000) (0MB)
[ 0.000000] efi: mem63: type=4, attr=0xf, range=[0x000000000189a000-0x000000000189d000) (0MB)
[ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x000000000189d000-0x00000000018a1000) (0MB)
[ 0.000000] efi: mem65: type=4, attr=0xf, range=[0x00000000018a1000-0x00000000018a4000) (0MB)
[ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x00000000018a4000-0x00000000018a6000) (0MB)
[ 0.000000] efi: mem67: type=4, attr=0xf, range=[0x00000000018a6000-0x00000000018b3000) (0MB)
[ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000018b3000-0x00000000018b7000) (0MB)
[ 0.000000] efi: mem69: type=4, attr=0xf, range=[0x00000000018b7000-0x00000000018c0000) (0MB)
[ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000018c0000-0x00000000018c4000) (0MB)
[ 0.000000] efi: mem71: type=4, attr=0xf, range=[0x00000000018c4000-0x00000000018c9000) (0MB)
[ 0.000000] efi: mem72: type=3, attr=0xf, range=[0x00000000018c9000-0x00000000018d2000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x00000000018d2000-0x00000000018d6000) (0MB)
[ 0.000000] efi: mem74: type=3, attr=0xf, range=[0x00000000018d6000-0x00000000018da000) (0MB)
[ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x00000000018da000-0x00000000018dd000) (0MB)
[ 0.000000] efi: mem76: type=3, attr=0xf, range=[0x00000000018dd000-0x0000000001926000) (0MB)
[ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x0000000001926000-0x0000000001932000) (0MB)
[ 0.000000] efi: mem78: type=3, attr=0xf, range=[0x0000000001932000-0x0000000001936000) (0MB)
[ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x0000000001936000-0x0000000001939000) (0MB)
[ 0.000000] efi: mem80: type=3, attr=0xf, range=[0x0000000001939000-0x000000000193c000) (0MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x000000000193c000-0x0000000001940000) (0MB)
[ 0.000000] efi: mem82: type=3, attr=0xf, range=[0x0000000001940000-0x0000000001943000) (0MB)
[ 0.000000] efi: mem83: type=4, attr=0xf, range=[0x0000000001943000-0x0000000001945000) (0MB)
[ 0.000000] efi: mem84: type=3, attr=0xf, range=[0x0000000001945000-0x0000000001947000) (0MB)
[ 0.000000] efi: mem85: type=4, attr=0xf, range=[0x0000000001947000-0x0000000001949000) (0MB)
[ 0.000000] efi: mem86: type=3, attr=0xf, range=[0x0000000001949000-0x000000000194b000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x000000000194b000-0x000000000194d000) (0MB)
[ 0.000000] efi: mem88: type=3, attr=0xf, range=[0x000000000194d000-0x0000000001954000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x0000000001954000-0x000000000a004000) (134MB)
[ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x000000000a004000-0x000000000a006000) (0MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x000000000a006000-0x000000000a00c000) (0MB)
[ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x000000000a00c000-0x000000000a00f000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x000000000a00f000-0x000000000a017000) (0MB)
[ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x000000000a017000-0x000000000a01a000) (0MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x000000000a01a000-0x000000000a01c000) (0MB)
[ 0.000000] efi: mem96: type=3, attr=0xf, range=[0x000000000a01c000-0x000000000a01e000) (0MB)
[ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x000000000a01e000-0x000000000a020000) (0MB)
[ 0.000000] efi: mem98: type=3, attr=0xf, range=[0x000000000a020000-0x000000000a022000) (0MB)
[ 0.000000] efi: mem99: type=4, attr=0xf, range=[0x000000000a022000-0x000000000a028000) (0MB)
[ 0.000000] efi: mem100: type=3, attr=0xf, range=[0x000000000a028000-0x000000000a02b000) (0MB)
[ 0.000000] efi: mem101: type=4, attr=0xf, range=[0x000000000a02b000-0x000000000a02d000) (0MB)
[ 0.000000] efi: mem102: type=3, attr=0xf, range=[0x000000000a02d000-0x000000000a02f000) (0MB)
[ 0.000000] efi: mem103: type=4, attr=0xf, range=[0x000000000a02f000-0x000000000a031000) (0MB)
[ 0.000000] efi: mem104: type=3, attr=0xf, range=[0x000000000a031000-0x000000000a033000) (0MB)
[ 0.000000] efi: mem105: type=4, attr=0xf, range=[0x000000000a033000-0x000000000a037000) (0MB)
[ 0.000000] efi: mem106: type=3, attr=0xf, range=[0x000000000a037000-0x000000000a039000) (0MB)
[ 0.000000] efi: mem107: type=4, attr=0xf, range=[0x000000000a039000-0x000000000a048000) (0MB)
[ 0.000000] efi: mem108: type=3, attr=0xf, range=[0x000000000a048000-0x000000000a04a000) (0MB)
[ 0.000000] efi: mem109: type=4, attr=0xf, range=[0x000000000a04a000-0x000000000a04f000) (0MB)
[ 0.000000] efi: mem110: type=3, attr=0xf, range=[0x000000000a04f000-0x000000000a05c000) (0MB)
[ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x000000000a05c000-0x000000000a05e000) (0MB)
[ 0.000000] efi: mem112: type=3, attr=0xf, range=[0x000000000a05e000-0x000000000a060000) (0MB)
[ 0.000000] efi: mem113: type=4, attr=0xf, range=[0x000000000a060000-0x000000000a062000) (0MB)
[ 0.000000] efi: mem114: type=3, attr=0xf, range=[0x000000000a062000-0x000000000a064000) (0MB)
[ 0.000000] efi: mem115: type=4, attr=0xf, range=[0x000000000a064000-0x000000000a066000) (0MB)
[ 0.000000] efi: mem116: type=3, attr=0xf, range=[0x000000000a066000-0x000000000a068000) (0MB)
[ 0.000000] efi: mem117: type=4, attr=0xf, range=[0x000000000a068000-0x000000000a06c000) (0MB)
[ 0.000000] efi: mem118: type=3, attr=0xf, range=[0x000000000a06c000-0x000000000a072000) (0MB)
[ 0.000000] efi: mem119: type=4, attr=0xf, range=[0x000000000a072000-0x000000000a07a000) (0MB)
[ 0.000000] efi: mem120: type=3, attr=0xf, range=[0x000000000a07a000-0x000000000a07c000) (0MB)
[ 0.000000] efi: mem121: type=4, attr=0xf, range=[0x000000000a07c000-0x000000000a084000) (0MB)
[ 0.000000] efi: mem122: type=3, attr=0xf, range=[0x000000000a084000-0x000000000a087000) (0MB)
[ 0.000000] efi: mem123: type=4, attr=0xf, range=[0x000000000a087000-0x000000000a08f000) (0MB)
[ 0.000000] efi: mem124: type=3, attr=0xf, range=[0x000000000a08f000-0x000000000a091000) (0MB)
[ 0.000000] efi: mem125: type=4, attr=0xf, range=[0x000000000a091000-0x000000000a093000) (0MB)
[ 0.000000] efi: mem126: type=3, attr=0xf, range=[0x000000000a093000-0x000000000a098000) (0MB)
[ 0.000000] efi: mem127: type=4, attr=0xf, range=[0x000000000a098000-0x000000000a09e000) (0MB)
[ 0.000000] efi: mem128: type=3, attr=0xf, range=[0x000000000a09e000-0x000000000a0a1000) (0MB)
[ 0.000000] efi: mem129: type=4, attr=0xf, range=[0x000000000a0a1000-0x000000000a0c1000) (0MB)
[ 0.000000] efi: mem130: type=3, attr=0xf, range=[0x000000000a0c1000-0x000000000a0d1000) (0MB)
[ 0.000000] efi: mem131: type=4, attr=0xf, range=[0x000000000a0d1000-0x000000000a3fc000) (3MB)
[ 0.000000] efi: mem132: type=7, attr=0xf, range=[0x000000000a3fc000-0x000000000a3ff000) (0MB)
[ 0.000000] efi: mem133: type=4, attr=0xf, range=[0x000000000a3ff000-0x000000000a493000) (0MB)
[ 0.000000] efi: mem134: type=3, attr=0xf, range=[0x000000000a493000-0x000000000a495000) (0MB)
[ 0.000000] efi: mem135: type=4, attr=0xf, range=[0x000000000a495000-0x000000000a4b4000) (0MB)
[ 0.000000] efi: mem136: type=3, attr=0xf, range=[0x000000000a4b4000-0x000000000a4bf000) (0MB)
[ 0.000000] efi: mem137: type=4, attr=0xf, range=[0x000000000a4bf000-0x000000000a4c9000) (0MB)
[ 0.000000] efi: mem138: type=7, attr=0xf, range=[0x000000000a4c9000-0x000000000a4cd000) (0MB)
[ 0.000000] efi: mem139: type=4, attr=0xf, range=[0x000000000a4cd000-0x000000000a5cb000) (0MB)
[ 0.000000] efi: mem140: type=7, attr=0xf, range=[0x000000000a5cb000-0x000000000a5ec000) (0MB)
[ 0.000000] efi: mem141: type=1, attr=0xf, range=[0x000000000a5ec000-0x000000000a60d000) (0MB)
[ 0.000000] efi: mem142: type=7, attr=0xf, range=[0x000000000a60d000-0x000000000a7d0000) (1MB)
[ 0.000000] efi: mem143: type=4, attr=0xf, range=[0x000000000a7d0000-0x000000000ac40000) (4MB)
[ 0.000000] efi: mem144: type=7, attr=0xf, range=[0x000000000ac40000-0x0000000020000000) (339MB)
[ 0.000000] efi: mem145: type=6, attr=0x800000000000000f, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem146: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037a4e000) (376MB)
[ 0.000000] efi: mem147: type=2, attr=0xf, range=[0x0000000037a4e000-0x0000000037d1f000) (2MB)
[ 0.000000] efi: mem148: type=7, attr=0xf, range=[0x0000000037d1f000-0x0000000040000000) (130MB)
[ 0.000000] efi: mem149: type=6, attr=0x800000000000000f, range=[0x0000000040000000-0x0000000040200000) (2MB)
[ 0.000000] efi: mem150: type=7, attr=0xf, range=[0x0000000040200000-0x00000000859fe000) (1111MB)
[ 0.000000] efi: mem151: type=2, attr=0xf, range=[0x00000000859fe000-0x00000000aed8a000) (659MB)
[ 0.000000] efi: mem152: type=10, attr=0xf, range=[0x00000000aed8a000-0x00000000aeddc000) (0MB)
[ 0.000000] efi: mem153: type=6, attr=0x800000000000000f, range=[0x00000000aeddc000-0x00000000aeddf000) (0MB)
[ 0.000000] efi: mem154: type=0, attr=0xf, range=[0x00000000aeddf000-0x00000000aee06000) (0MB)
[ 0.000000] efi: mem155: type=5, attr=0x800000000000000f, range=[0x00000000aee06000-0x00000000aee07000) (0MB)
[ 0.000000] efi: mem156: type=6, attr=0x800000000000000f, range=[0x00000000aee07000-0x00000000aee08000) (0MB)
[ 0.000000] efi: mem157: type=7, attr=0xf, range=[0x00000000aee08000-0x00000000aee09000) (0MB)
[ 0.000000] efi: mem158: type=10, attr=0xf, range=[0x00000000aee09000-0x00000000aee0c000) (0MB)
[ 0.000000] efi: mem159: type=9, attr=0xf, range=[0x00000000aee0c000-0x00000000aee0d000) (0MB)
[ 0.000000] efi: mem160: type=10, attr=0xf, range=[0x00000000aee0d000-0x00000000aee17000) (0MB)
[ 0.000000] efi: mem161: type=5, attr=0x800000000000000f, range=[0x00000000aee17000-0x00000000aee1b000) (0MB)
[ 0.000000] efi: mem162: type=6, attr=0x800000000000000f, range=[0x00000000aee1b000-0x00000000aee2c000) (0MB)
[ 0.000000] efi: mem163: type=5, attr=0x800000000000000f, range=[0x00000000aee2c000-0x00000000aee39000) (0MB)
[ 0.000000] efi: mem164: type=6, attr=0x800000000000000f, range=[0x00000000aee39000-0x00000000aee3c000) (0MB)
[ 0.000000] efi: mem165: type=10, attr=0xf, range=[0x00000000aee3c000-0x00000000aee7f000) (0MB)
[ 0.000000] efi: mem166: type=3, attr=0xf, range=[0x00000000aee7f000-0x00000000aeff3000) (1MB)
[ 0.000000] efi: mem167: type=4, attr=0xf, range=[0x00000000aeff3000-0x00000000aeff6000) (0MB)
[ 0.000000] efi: mem168: type=3, attr=0xf, range=[0x00000000aeff6000-0x00000000af000000) (0MB)
[ 0.000000] efi: mem169: type=7, attr=0xf, range=[0x0000000100000000-0x000000013fe00000) (1022MB)
[ 0.000000] efi: mem170: type=0, attr=0x8000000000000000, range=[0x00000000af800000-0x00000000bfa00000) (258MB)
[ 0.000000] efi: mem171: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem172: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fed40000) (0MB)
[ 0.000000] efi: mem173: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z68 Pro3-M, BIOS P1.40 07/08/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x13fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0AF800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 13FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000af800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xaf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fce90] fce90
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000af000000
[ 0.000000] 0000000000 - 00af000000 page 2M
[ 0.000000] kernel direct mapping tables up to af000000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000013fe00000
[ 0.000000] 0100000000 - 013fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 13fe00000 @ aed84000-aed8a000
[ 0.000000] RAMDISK: 37a4e000 - 37d1f000
[ 0.000000] ACPI: RSDP 00000000aedd4000 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000aedd4068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000aeddb858 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000aedd4150 07702 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000aee0ef80 00040
[ 0.000000] ACPI: APIC 00000000aeddb950 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000aeddb9c8 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000aeddbad0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000aeddbb10 000D3 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000aeddbbe8 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000013fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000013fe00000
[ 0.000000] NODE_DATA [000000013fdfc000 - 000000013fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0013fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000aed8a
[ 0.000000] 0: 0x000aee08 -> 0x000aee09
[ 0.000000] 0: 0x000aee7f -> 0x000af000
[ 0.000000] 0: 0x00100000 -> 0x0013fe00
[ 0.000000] On node 0 totalpages: 977052
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 12 pages reserved
[ 0.000000] DMA zone: 3908 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 695116 pages, LIFO batch:31
[ 0.000000] Normal zone: 4088 pages used for memmap
[ 0.000000] Normal zone: 257544 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000aed8a000 - 00000000aeddc000
[ 0.000000] PM: Registered nosave memory: 00000000aeddc000 - 00000000aee08000
[ 0.000000] PM: Registered nosave memory: 00000000aee09000 - 00000000aee0c000
[ 0.000000] PM: Registered nosave memory: 00000000aee0c000 - 00000000aee0d000
[ 0.000000] PM: Registered nosave memory: 00000000aee0d000 - 00000000aee17000
[ 0.000000] PM: Registered nosave memory: 00000000aee17000 - 00000000aee3c000
[ 0.000000] PM: Registered nosave memory: 00000000aee3c000 - 00000000aee7f000
[ 0.000000] PM: Registered nosave memory: 00000000af000000 - 00000000af800000
[ 0.000000] PM: Registered nosave memory: 00000000af800000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fa00000 s82944 r8192 d23552 u524288
[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 956568
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/e1084449-2e1e-4073-b8ce-1cccb4558de0 rootfstype=ext4 ro add_efi_memmap
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3754180k/5240832k available (4543k kernel code, 1332624k absent, 154028k reserved, 4304k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 15728640 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 3092.770 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6188.27 BogoMIPS (lpj=10309233)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000024] init_memory_mapping: 00000000af800000-00000000bfa00000
[ 0.000026] 00af800000 - 00bfa00000 page 2M
[ 0.079342] Security Framework initialized
[ 0.079345] AppArmor: AppArmor disabled by boot time parameter
[ 0.079541] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.080185] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.080471] Mount-cache hash table entries: 256
[ 0.080591] Initializing cgroup subsys cpuacct
[ 0.080593] Initializing cgroup subsys memory
[ 0.080597] Initializing cgroup subsys devices
[ 0.080599] Initializing cgroup subsys freezer
[ 0.080600] Initializing cgroup subsys net_cls
[ 0.080601] Initializing cgroup subsys blkio
[ 0.080620] CPU: Physical Processor ID: 0
[ 0.080621] CPU: Processor Core ID: 0
[ 0.080625] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.080625] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.080627] mce: CPU supports 7 MCE banks
[ 0.080636] CPU0: Thermal monitoring enabled (TM1)
[ 0.080642] using mwait in idle threads.
[ 0.081556] ACPI: Core revision 20120320
[ 0.084916] ftrace: allocating 17833 entries in 70 pages
[ 0.093003] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.125997] CPU0: Intel(R) Core(TM) i3-2105 CPU @ 3.10GHz stepping 07
[ 0.230294] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.230299] PEBS disabled due to CPU errata.
[ 0.230301] ... version: 3
[ 0.230301] ... bit width: 48
[ 0.230302] ... generic registers: 4
[ 0.230303] ... value mask: 0000ffffffffffff
[ 0.230304] ... max period: 000000007fffffff
[ 0.230305] ... fixed-purpose events: 3
[ 0.230306] ... event mask: 000000070000000f
[ 0.250355] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.270297] Booting Node 0, Processors #1
[ 0.283526] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.293637] #2
[ 0.306866] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.316959] #3 Ok.
[ 0.330186] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.330210] Brought up 4 CPUs
[ 0.330211] Total of 4 processors activated (24752.08 BogoMIPS).
[ 0.332745] devtmpfs: initialized
[ 0.333413] PM: Registering ACPI NVS region [mem 0xaed8a000-0xaeddbfff] (335872 bytes)
[ 0.333418] PM: Registering ACPI NVS region [mem 0xaee09000-0xaee0bfff] (12288 bytes)
[ 0.333419] PM: Registering ACPI NVS region [mem 0xaee0d000-0xaee16fff] (40960 bytes)
[ 0.333421] PM: Registering ACPI NVS region [mem 0xaee3c000-0xaee7efff] (274432 bytes)
[ 0.333881] NET: Registered protocol family 16
[ 0.333955] ACPI: bus type pci registered
[ 0.333997] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.333999] PCI: not using MMCONFIG
[ 0.334000] PCI: Using configuration type 1 for base access
[ 0.334351] bio: create slab <bio-0> at 0
[ 0.334388] ACPI: Added _OSI(Module Device)
[ 0.334389] ACPI: Added _OSI(Processor Device)
[ 0.334390] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.334392] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.335133] ACPI: EC: Look up EC in DSDT
[ 0.335970] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.337761] ACPI: SSDT 00000000aee0dc18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.337968] ACPI: Dynamic OEM Table Load:
[ 0.337970] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.337986] ACPI: SSDT 00000000aee0ee18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.338158] ACPI: Dynamic OEM Table Load:
[ 0.338160] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.338495] ACPI: Interpreter enabled
[ 0.338497] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.338509] ACPI: Using IOAPIC for interrupt routing
[ 0.338523] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.338564] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.381551] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.384682] ACPI: No dock devices found.
[ 0.384684] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.384801] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.384911] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.384913] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.384914] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.384916] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[ 0.384917] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xffffffff]
[ 0.384921] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cdbff])
[ 0.384940] PCI host bridge to bus 0000:00
[ 0.384942] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.384943] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.384945] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.384946] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff]
[ 0.384953] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.384982] pci 0000:00:02.0: [8086:0112] type 00 class 0x030000
[ 0.384990] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.384995] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.384998] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.385057] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.385088] pci 0000:00:16.0: reg 10: [mem 0xfe508000-0xfe50800f 64bit]
[ 0.385193] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.385238] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.385266] pci 0000:00:1a.0: reg 10: [mem 0xfe507000-0xfe5073ff]
[ 0.385392] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.385427] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.385448] pci 0000:00:1b.0: reg 10: [mem 0xfe500000-0xfe503fff 64bit]
[ 0.385547] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.385577] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.385690] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.385725] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.385839] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.385873] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
[ 0.385986] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.386019] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.386132] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.386173] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.386202] pci 0000:00:1d.0: reg 10: [mem 0xfe506000-0xfe5063ff]
[ 0.386329] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.386361] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
[ 0.386527] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.386555] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 0.386566] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 0.386576] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 0.386587] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 0.386598] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.386607] pci 0000:00:1f.2: reg 24: [mem 0xfe505000-0xfe5057ff]
[ 0.386676] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.386700] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.386721] pci 0000:00:1f.3: reg 10: [mem 0xfe504000-0xfe5040ff 64bit]
[ 0.386750] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.386848] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.386950] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.386983] pci 0000:02:00.0: reg 10: [mem 0xfe400000-0xfe407fff 64bit]
[ 0.387143] pci 0000:02:00.0: supports D1 D2
[ 0.387144] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.393607] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 0.393617] pci 0000:00:1c.2: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.393711] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401
[ 0.393860] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.393874] pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.393875] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.393877] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.393878] pci 0000:00:1c.4: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[ 0.394016] pci 0000:03:00.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.394042] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.394044] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.394045] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.394047] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.394048] pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.394050] pci 0000:03:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.394051] pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.394053] pci 0000:03:00.0: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[ 0.394153] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.394177] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.394220] pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.394246] pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.394361] pci 0000:05:00.0: supports D1 D2
[ 0.394362] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.400270] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.400276] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.400289] pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.400326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.400385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.400402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.400418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.400434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.PE2P._PRT]
[ 0.400449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.400518] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.400639] pci0000:00: ACPI _OSC control (0x1c) granted
[ 0.402717] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.402746] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.402774] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.402801] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.402829] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.402857] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.402885] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.402912] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.402970] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.402975] vgaarb: loaded
[ 0.402975] vgaarb: bridge control possible 0000:00:02.0
[ 0.402997] PCI: Using ACPI for IRQ routing
[ 0.413220] PCI: pci_cache_line_size set to 64 bytes
[ 0.413282] reserve RAM buffer: 00000000aed8a000 - 00000000afffffff
[ 0.413284] reserve RAM buffer: 00000000aee09000 - 00000000afffffff
[ 0.413286] reserve RAM buffer: 00000000af000000 - 00000000afffffff
[ 0.413287] reserve RAM buffer: 000000013fe00000 - 000000013fffffff
[ 0.413348] NetLabel: Initializing
[ 0.413349] NetLabel: domain hash size = 128
[ 0.413350] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.413358] NetLabel: unlabeled traffic allowed by default
[ 0.413372] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.413377] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.415389] Switching to clocksource hpet
[ 0.418942] pnp: PnP ACPI init
[ 0.418954] ACPI: bus type pnp registered
[ 0.419048] pnp 00:00: [bus 00-ff]
[ 0.419049] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.419051] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.419052] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.419053] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.419055] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[ 0.419056] pnp 00:00: [mem 0xbfa00000-0xffffffff window]
[ 0.419057] pnp 00:00: [mem 0x00000000 window]
[ 0.419096] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.419130] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[ 0.419131] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.419132] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.419133] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.419134] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.419162] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.419164] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.419165] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.419167] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.419168] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.419171] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.419205] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.419206] pnp 00:02: [io 0x0290-0x029f]
[ 0.419209] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.419229] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.419231] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.419407] pnp 00:03: [io 0x03f0-0x03f5]
[ 0.419409] pnp 00:03: [io 0x03f7]
[ 0.419416] pnp 00:03: [irq 6]
[ 0.419418] pnp 00:03: [dma 2]
[ 0.419450] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.419661] pnp 00:04: [io 0x0378-0x037f]
[ 0.419663] pnp 00:04: [io 0x0778-0x077f]
[ 0.419667] pnp 00:04: [irq 5]
[ 0.419668] pnp 00:04: [dma 3]
[ 0.419746] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.419865] pnp 00:05: [dma 4]
[ 0.419866] pnp 00:05: [io 0x0000-0x000f]
[ 0.419867] pnp 00:05: [io 0x0081-0x0083]
[ 0.419868] pnp 00:05: [io 0x0087]
[ 0.419869] pnp 00:05: [io 0x0089-0x008b]
[ 0.419872] pnp 00:05: [io 0x008f]
[ 0.419873] pnp 00:05: [io 0x00c0-0x00df]
[ 0.419887] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.419893] pnp 00:06: [io 0x0070-0x0071]
[ 0.419897] pnp 00:06: [irq 8]
[ 0.419910] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.419914] pnp 00:07: [io 0x0061]
[ 0.419928] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.419937] pnp 00:08: [io 0x0010-0x001f]
[ 0.419938] pnp 00:08: [io 0x0022-0x003f]
[ 0.419939] pnp 00:08: [io 0x0044-0x005f]
[ 0.419940] pnp 00:08: [io 0x0062-0x0063]
[ 0.419941] pnp 00:08: [io 0x0065-0x006f]
[ 0.419942] pnp 00:08: [io 0x0072-0x007f]
[ 0.419943] pnp 00:08: [io 0x0080]
[ 0.419944] pnp 00:08: [io 0x0084-0x0086]
[ 0.419945] pnp 00:08: [io 0x0088]
[ 0.419946] pnp 00:08: [io 0x008c-0x008e]
[ 0.419947] pnp 00:08: [io 0x0090-0x009f]
[ 0.419949] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.419950] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.419951] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.419973] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.419975] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.419980] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.419984] pnp 00:09: [irq 13]
[ 0.419997] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.420153] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.420157] pnp 00:0a: [irq 4]
[ 0.420159] pnp 00:0a: [dma 0 disabled]
[ 0.420194] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.420297] pnp 00:0b: [io 0x0400-0x0453]
[ 0.420298] pnp 00:0b: [io 0x0458-0x047f]
[ 0.420299] pnp 00:0b: [io 0x1180-0x119f]
[ 0.420301] pnp 00:0b: [io 0x0500-0x057f]
[ 0.420303] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 0.420304] pnp 00:0b: [mem 0xfec00000-0xfecfffff]
[ 0.420305] pnp 00:0b: [mem 0xfed08000-0xfed08fff]
[ 0.420306] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 0.420328] system 00:0b: [io 0x0400-0x0453] has been reserved
[ 0.420329] system 00:0b: [io 0x0458-0x047f] has been reserved
[ 0.420331] system 00:0b: [io 0x1180-0x119f] has been reserved
[ 0.420332] system 00:0b: [io 0x0500-0x057f] has been reserved
[ 0.420334] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.420336] system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.420337] system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.420339] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 0.420341] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.420362] pnp 00:0c: [io 0x0454-0x0457]
[ 0.420384] system 00:0c: [io 0x0454-0x0457] has been reserved
[ 0.420386] system 00:0c: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.420450] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 0.420471] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.420563] pnp: PnP ACPI: found 14 devices
[ 0.420564] ACPI: ACPI bus type pnp unregistered
[ 0.426680] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.426695] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 0.426701] pci 0000:00:1c.2: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.426711] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[ 0.426735] pci 0000:00:1c.4: PCI bridge to [bus 03-04]
[ 0.426749] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.426752] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.426761] pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.426802] pci 0000:03:00.0: setting latency timer to 64
[ 0.426811] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.426813] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.426814] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.426816] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff]
[ 0.426817] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.426819] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.426820] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.426821] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.426823] pci_bus 0000:03: resource 7 [mem 0xbfa00000-0xffffffff]
[ 0.426824] pci_bus 0000:04: resource 8 [io 0x0000-0x0cf7]
[ 0.426826] pci_bus 0000:04: resource 9 [io 0x0d00-0xffff]
[ 0.426827] pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.426828] pci_bus 0000:04: resource 11 [mem 0xbfa00000-0xffffffff]
[ 0.426830] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.426831] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.426856] NET: Registered protocol family 2
[ 0.426935] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.427381] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.428316] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.428427] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.428429] TCP: reno registered
[ 0.428434] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.428446] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.428503] NET: Registered protocol family 1
[ 0.428513] pci 0000:00:02.0: Boot video device
[ 0.675460] PCI: CLS 64 bytes, default 64
[ 0.675493] Unpacking initramfs...
[ 0.714785] Freeing initrd memory: 2884k freed
[ 0.715067] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.715071] Placing 64MB software IO TLB between ffff8800aad84000 - ffff8800aed84000
[ 0.715072] software IO TLB at phys 0xaad84000 - 0xaed84000
[ 0.715429] audit: initializing netlink socket (disabled)
[ 0.715441] type=2000 audit(1345564835.613:1): initialized
[ 0.715668] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.716758] VFS: Disk quotas dquot_6.5.2
[ 0.716785] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.716842] msgmni has been set to 7361
[ 0.716962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.716985] io scheduler noop registered
[ 0.716987] io scheduler deadline registered
[ 0.717018] io scheduler cfq registered (default)
[ 0.717132] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.717265] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 0.717395] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.717490] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.717494] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.717512] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.717514] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.717518] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.717535] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.717536] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.717541] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.717599] efifb: probing for efifb
[ 0.718140] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90012180000, using 3072k, total 3072k
[ 0.718142] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.718143] efifb: scrolling: redraw
[ 0.718144] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.719514] Console: switching to colour frame buffer device 128x48
[ 0.720791] fb0: EFI VGA frame buffer device
[ 0.720795] intel_idle: MWAIT substates: 0x1120
[ 0.720796] intel_idle: v0.4 model 0x2A
[ 0.720797] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.720820] GHES: HEST is not enabled!
[ 0.720854] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.741411] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.762150] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.762283] Linux agpgart interface v0.103
[ 0.762329] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.765011] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.765031] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.765094] mousedev: PS/2 mouse device common for all mice
[ 0.765136] rtc_cmos 00:06: RTC can wake from S4
[ 0.765260] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.765289] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.765337] cpuidle: using governor ladder
[ 0.765421] cpuidle: using governor menu
[ 0.765509] TCP: cubic registered
[ 0.765572] NET: Registered protocol family 10
[ 0.765685] NET: Registered protocol family 17
[ 0.765688] Registering the dns_resolver key type
[ 0.765783] PM: Hibernation image not present or could not be loaded.
[ 0.765788] registered taskstats version 1
[ 0.766185] rtc_cmos 00:06: setting system clock to 2012-08-21 16:00:36 UTC (1345564836)
[ 0.766220] Initializing network drop monitor service
[ 0.767065] Freeing unused kernel memory: 740k freed
[ 0.767136] Write protecting the kernel read-only data: 8192k
[ 0.770282] Freeing unused kernel memory: 1584k freed
[ 0.771697] Freeing unused kernel memory: 636k freed
[ 0.776816] systemd-udevd[47]: starting version 188
[ 0.778195] SCSI subsystem initialized
[ 0.779045] libata version 3.00 loaded.
[ 0.779510] ahci 0000:00:1f.2: version 3.0
[ 0.779577] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.779608] ahci: SSS flag set, parallel bus scan disabled
[ 0.792074] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.792077] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 0.792082] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.827616] scsi0 : ahci
[ 0.827724] scsi1 : ahci
[ 0.827889] scsi2 : ahci
[ 0.828042] scsi3 : ahci
[ 0.828247] scsi4 : ahci
[ 0.828337] scsi5 : ahci
[ 0.828577] ata1: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505100 irq 43
[ 0.828580] ata2: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505180 irq 43
[ 0.828583] ata3: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505200 irq 43
[ 0.828586] ata4: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505280 irq 43
[ 0.828589] ata5: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505300 irq 43
[ 0.828592] ata6: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505380 irq 43
[ 1.148643] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.149073] ata1.00: ATA-9: M4-CT064M4SSD2, 0002, max UDMA/100
[ 1.149078] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.149569] ata1.00: configured for UDMA/100
[ 1.149769] scsi 0:0:0:0: Direct-Access ATA M4-CT064M4SSD2 0002 PQ: 0 ANSI: 5
[ 1.150512] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.150570] sd 0:0:0:0: [sda] Write Protect is off
[ 1.150573] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.150592] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.151977] sda: sda1 sda2 sda3 sda4
[ 1.152522] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.468572] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.470381] ata2.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 1.470385] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.473274] ata2.00: configured for UDMA/133
[ 1.473458] scsi 1:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 1.473563] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.473607] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.473610] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.473642] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.517966] sdb: sdb1 sdb2 sdb3
[ 1.518466] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.715157] Refined TSC clocksource calibration: 3092.974 MHz.
[ 1.715163] Switching to clocksource tsc
[ 1.791820] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.794693] ata3.00: ATAPI: ATAPI iHBS112 2, CL0K, max UDMA/100
[ 1.797137] ata3.00: configured for UDMA/100
[ 1.800652] scsi 2:0:0:0: CD-ROM ATAPI iHBS112 2 CL0K PQ: 0 ANSI: 5
[ 2.118410] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.438403] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.758269] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.759317] usbcore: registered new interface driver usbfs
[ 2.759331] usbcore: registered new interface driver hub
[ 2.759392] usbcore: registered new device driver usb
[ 2.759767] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.759783] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 2.759924] xhci_hcd 0000:02:00.0: irq 18, io mem 0xfe400000
[ 2.760013] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 2.760148] xHCI xhci_add_endpoint called for root hub
[ 2.760149] xHCI xhci_check_bandwidth called for root hub
[ 2.760166] hub 1-0:1.0: USB hub found
[ 2.760173] hub 1-0:1.0: 2 ports detected
[ 2.760241] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.760246] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 2.760307] xHCI xhci_add_endpoint called for root hub
[ 2.760308] xHCI xhci_check_bandwidth called for root hub
[ 2.760325] hub 2-0:1.0: USB hub found
[ 2.760331] hub 2-0:1.0: 2 ports detected
[ 2.761902] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.761934] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.761937] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.761943] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.761967] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.764780] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.764782] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.764953] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.765846] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.765866] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe507000
[ 2.774911] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.775035] hub 3-0:1.0: USB hub found
[ 2.775038] hub 3-0:1.0: 2 ports detected
[ 2.775116] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.775119] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.775125] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.775148] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.779024] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.779038] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe506000
[ 2.788249] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.788366] hub 4-0:1.0: USB hub found
[ 2.788369] hub 4-0:1.0: 2 ports detected
[ 2.820692] FDC 0 is a post-1991 82077
[ 2.872787] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[ 2.872789] EXT4-fs (sda3): write access will be enabled during recovery
[ 2.882131] EXT4-fs (sda3): recovery complete
[ 2.884871] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.982234] systemd-udevd[158]: starting version 188
[ 3.030910] FS-Cache: Loaded
[ 3.037531] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 3.037536] ACPI: Power Button [PWRB]
[ 3.037571] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.037574] ACPI: Power Button [PWRF]
[ 3.037734] RPC: Registered named UNIX socket transport module.
[ 3.037735] RPC: Registered udp transport module.
[ 3.037736] RPC: Registered tcp transport module.
[ 3.037737] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.037768] ACPI: Requesting acpi_cpufreq
[ 3.046690] NFS: Registering the id_resolver key type
[ 3.046702] FS-Cache: Netfs 'nfs' registered for caching
[ 3.048471] parport_pc 00:04: reported by Plug and Play ACPI
[ 3.048528] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 3.054887] Linux media interface: v0.10
[ 3.058479] iTCO_vendor_support: vendor-support=0
[ 3.058906] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.059160] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.059273] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.059907] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 3.059980] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 3.062446] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.063978] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.064004] Linux video capture interface: v2.00
[ 3.077833] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.078003] r8169 0000:05:00.0: irq 46 for MSI/MSI-X
[ 3.078206] r8169 0000:05:00.0: eth0: RTL8168evl/8111evl at 0xffffc900016f2000, 00:25:22:bf:8f:89, XID 0c900800 IRQ 46
[ 3.078219] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.079052] [drm] Initialized drm 1.1.0 20060810
[ 3.079105] usbcore: registered new interface driver uvcvideo
[ 3.079108] USB Video Class driver (1.1.1)
[ 3.081528] usb 3-1: new high-speed USB device number 2 using ehci_hcd
[ 3.108394] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
[ 3.129007] ppdev: user-space parallel port driver
[ 3.138311] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
[ 3.138894] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
[ 3.139667] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
[ 3.140205] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 3.205474] hub 3-1:1.0: USB hub found
[ 3.205580] hub 3-1:1.0: 6 ports detected
[ 3.311473] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 3.435441] hub 4-1:1.0: USB hub found
[ 3.435515] hub 4-1:1.0: 8 ports detected
[ 3.621479] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 3.621545] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 3.621591] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 3.621634] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 3.621676] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 3.621716] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 3.621757] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 3.621798] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 3.622331] mei 0000:00:16.0: setting latency timer to 64
[ 3.622424] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[ 3.628414] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 3.628609] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 3.630399] agpgart-intel 0000:00:00.0: detected 262144K stolen memory
[ 3.630714] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 3.630744] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 3.634204] i915 0000:00:02.0: setting latency timer to 64
[ 3.688532] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 3.688535] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 3.688658] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 3.688665] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.688666] [drm] Driver supports precise vblank timestamp query.
[ 3.688689] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.701451] usb 4-1.1: new full-speed USB device number 3 using ehci_hcd
[ 3.779653] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 3.810033] usbcore: registered new interface driver usbhid
[ 3.810037] usbhid: USB HID core driver
[ 3.816290] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input2
[ 3.818744] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.2/0003:046D:C52B.0003/input/input11
[ 3.819450] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:1d.0-1.1:1
[ 3.820990] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.2/0003:046D:C52B.0003/input/input12
[ 3.821189] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:1d.0-1.1:2
[ 3.854791] usb 4-1.2: new high-speed USB device number 4 using ehci_hcd
[ 4.038403] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 4.038405] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 4.038422] Console: switching to colour dummy device 80x25
[ 4.038941] fbcon: inteldrmfb (fb0) is primary device
[ 4.157787] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081b)
[ 4.172102] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input13
[ 4.201202] Console: switching to colour frame buffer device 240x67
[ 4.207749] fb0: inteldrmfb frame buffer device
[ 4.207751] drm: registered panic notifier
[ 4.207763] No ACPI video bus found
[ 4.207800] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.238123] usb 4-1.4: new full-speed USB device number 5 using ehci_hcd
[ 4.357930] Registered IR keymap rc-rc6-mce
[ 4.358063] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:060c) as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/rc/rc0/input14
[ 4.358178] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:060c) as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/rc/rc0
[ 4.359659] IR NEC protocol handler initialized
[ 4.361116] IR RC5(x) protocol handler initialized
[ 4.362624] IR RC6 protocol handler initialized
[ 4.364074] IR JVC protocol handler initialized
[ 4.365548] IR Sony protocol -
Gnome3 not work with ATI HD6950 Card?
Hey all..
I'm just installed the ALL drivers from the testing, and its the versions:
xf86-video-ati-6.14.2-1
mesa-7.10.99.git20110612-1
libdrm-2.4.25-1
And ofc, i'm using with last kernel 2.26.39.
So what's the problem with that? Why i can't running this Gnome3?
This is the my logs:
.xsession-errors:
/etc/gdm/Xsession: Beginning session setup...
/etc/gdm/Xsession: Setup done, will execute: gnome-session
Unknown chipset 0x6719
gnome-session-is-accelerated: No hardware 3D support.
gnome-session-check-accelerated: Helper exited with code 256
gnome-session[1181]: WARNING: Session 'gnome' runnable check failed: Exited with code 1
gnome-session[1181]: WARNING: Unable to find default provider 'notification-daemon' of required provider 'notifications'
Xorg.0.log:
[ 151.157]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 151.157] X Protocol Version 11, Revision 0
[ 151.157] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 151.157] Current Operating System: Linux yakir-arch 2.6.39-ARCH #1 SMP PREEMPT Mon Jun 6 22:37:55 CEST 2011 x86_64
[ 151.157] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
[ 151.157] Build Date: 30 May 2011 08:18:15AM
[ 151.157]
[ 151.157] Current version of pixman: 0.22.0
[ 151.157] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 151.157] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 151.157] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 16 11:52:13 2011
[ 151.157] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 151.157] (==) No Layout section. Using the first Screen section.
[ 151.157] (==) No screen section available. Using defaults.
[ 151.157] (**) |-->Screen "Default Screen Section" (0)
[ 151.157] (**) | |-->Monitor "<default monitor>"
[ 151.157] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 151.157] (**) | |-->Device "r"
[ 151.157] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 151.157] (==) Automatically adding devices
[ 151.157] (==) Automatically enabling devices
[ 151.157] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 151.157] Entry deleted from font path.
[ 151.157] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 151.157] Entry deleted from font path.
[ 151.157] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 151.157] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 151.157] Entry deleted from font path.
[ 151.157] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 151.157] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 151.157] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 151.157] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 151.157] (II) Loader magic: 0x7d3440
[ 151.157] (II) Module ABI versions:
[ 151.157] X.Org ANSI C Emulation: 0.4
[ 151.157] X.Org Video Driver: 10.0
[ 151.157] X.Org XInput driver : 12.2
[ 151.157] X.Org Server Extension : 5.0
[ 151.158] (--) PCI:*(0:1:0:0) 1002:6719:1002:0b00 rev 0, Mem @ 0xc0000000/268435456, 0xfe620000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 151.158] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 151.158] (II) "extmod" will be loaded by default.
[ 151.158] (II) "dbe" will be loaded by default.
[ 151.158] (II) "glx" will be loaded by default.
[ 151.158] (II) "record" will be loaded by default.
[ 151.158] (II) "dri" will be loaded by default.
[ 151.158] (II) "dri2" will be loaded by default.
[ 151.158] (II) LoadModule: "extmod"
[ 151.158] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 151.158] (II) Module extmod: vendor="X.Org Foundation"
[ 151.158] compiled for 1.10.2, module version = 1.0.0
[ 151.158] Module class: X.Org Server Extension
[ 151.158] ABI class: X.Org Server Extension, version 5.0
[ 151.158] (II) Loading extension MIT-SCREEN-SAVER
[ 151.158] (II) Loading extension XFree86-VidModeExtension
[ 151.158] (II) Loading extension XFree86-DGA
[ 151.158] (II) Loading extension DPMS
[ 151.158] (II) Loading extension XVideo
[ 151.158] (II) Loading extension XVideo-MotionCompensation
[ 151.158] (II) Loading extension X-Resource
[ 151.158] (II) LoadModule: "dbe"
[ 151.158] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 151.158] (II) Module dbe: vendor="X.Org Foundation"
[ 151.158] compiled for 1.10.2, module version = 1.0.0
[ 151.158] Module class: X.Org Server Extension
[ 151.158] ABI class: X.Org Server Extension, version 5.0
[ 151.158] (II) Loading extension DOUBLE-BUFFER
[ 151.158] (II) LoadModule: "glx"
[ 151.158] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 151.158] (II) Module glx: vendor="X.Org Foundation"
[ 151.158] compiled for 1.10.2, module version = 1.0.0
[ 151.158] ABI class: X.Org Server Extension, version 5.0
[ 151.158] (==) AIGLX enabled
[ 151.158] (II) Loading extension GLX
[ 151.158] (II) LoadModule: "record"
[ 151.158] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 151.158] (II) Module record: vendor="X.Org Foundation"
[ 151.158] compiled for 1.10.2, module version = 1.13.0
[ 151.158] Module class: X.Org Server Extension
[ 151.158] ABI class: X.Org Server Extension, version 5.0
[ 151.158] (II) Loading extension RECORD
[ 151.158] (II) LoadModule: "dri"
[ 151.158] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 151.158] (II) Module dri: vendor="X.Org Foundation"
[ 151.158] compiled for 1.10.2, module version = 1.0.0
[ 151.158] ABI class: X.Org Server Extension, version 5.0
[ 151.158] (II) Loading extension XFree86-DRI
[ 151.158] (II) LoadModule: "dri2"
[ 151.158] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 151.158] (II) Module dri2: vendor="X.Org Foundation"
[ 151.158] compiled for 1.10.2, module version = 1.2.0
[ 151.158] ABI class: X.Org Server Extension, version 5.0
[ 151.158] (II) Loading extension DRI2
[ 151.158] (II) LoadModule: "radeon"
[ 151.159] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 151.159] (II) Module radeon: vendor="X.Org Foundation"
[ 151.159] compiled for 1.10.1, module version = 6.14.2
[ 151.159] Module class: X.Org Video Driver
[ 151.159] ABI class: X.Org Video Driver, version 10.0
[ 151.159] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS
[ 151.162] (++) using VT number 8
[ 151.165] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 151.165] (II) [KMS] Kernel modesetting enabled.
[ 151.165] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 151.165] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 151.165] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 151.165] (==) RADEON(0): Default visual is TrueColor
[ 151.165] (==) RADEON(0): RGB weight 888
[ 151.165] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 151.165] (--) RADEON(0): Chipset: "AMD Radeon HD 6900 Series" (ChipID = 0x6719)
[ 151.165] (II) RADEON(0): PCIE card detected
[ 151.165] drmOpenDevice: node name is /dev/dri/card0
[ 151.165] drmOpenDevice: open result is 8, (OK)
[ 151.165] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 151.165] drmOpenDevice: node name is /dev/dri/card0
[ 151.165] drmOpenDevice: open result is 8, (OK)
[ 151.165] drmOpenByBusid: drmOpenMinor returns 8
[ 151.165] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 151.165] (II) Loading sub module "exa"
[ 151.165] (II) LoadModule: "exa"
[ 151.165] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 151.165] (II) Module exa: vendor="X.Org Foundation"
[ 151.165] compiled for 1.10.2, module version = 2.5.0
[ 151.165] ABI class: X.Org Video Driver, version 10.0
[ 151.165] (II) RADEON(0): KMS Color Tiling: disabled
[ 151.165] (II) RADEON(0): KMS Pageflipping: enabled
[ 151.165] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 151.170] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 151.176] (II) RADEON(0): Output DisplayPort-1 has no monitor section
[ 151.180] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 151.184] (II) RADEON(0): Output DVI-0 has no monitor section
[ 151.238] (II) RADEON(0): Output DVI-1 has no monitor section
[ 151.243] (II) RADEON(0): EDID for output DisplayPort-0
[ 151.250] (II) RADEON(0): EDID for output DisplayPort-1
[ 151.254] (II) RADEON(0): EDID for output HDMI-0
[ 151.257] (II) RADEON(0): EDID for output DVI-0
[ 151.312] (II) RADEON(0): EDID for output DVI-1
[ 151.312] (II) RADEON(0): Manufacturer: SAM Model: 736 Serial#: 1129132595
[ 151.312] (II) RADEON(0): Year: 2010 Week: 51
[ 151.312] (II) RADEON(0): EDID Version: 1.3
[ 151.312] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 151.312] (II) RADEON(0): Sync: Separate Composite SyncOnGreen
[ 151.312] (II) RADEON(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 151.312] (II) RADEON(0): Gamma: 2.20
[ 151.312] (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
[ 151.312] (II) RADEON(0): First detailed timing is preferred mode
[ 151.312] (II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 151.312] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 151.312] (II) RADEON(0): Supported established timings:
[ 151.312] (II) RADEON(0): 640x480@60Hz
[ 151.312] (II) RADEON(0): 800x600@56Hz
[ 151.312] (II) RADEON(0): 800x600@60Hz
[ 151.312] (II) RADEON(0): 1024x768@60Hz
[ 151.312] (II) RADEON(0): Manufacturer's mask: 0
[ 151.312] (II) RADEON(0): Supported standard timings:
[ 151.312] (II) RADEON(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 151.312] (II) RADEON(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 151.312] (II) RADEON(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 151.312] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 151.312] (II) RADEON(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 151.312] (II) RADEON(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 151.312] (II) RADEON(0): Supported detailed timing:
[ 151.312] (II) RADEON(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 151.312] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 151.312] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 151.312] (II) RADEON(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 75 kHz, PixClock max 175 MHz
[ 151.312] (II) RADEON(0): Monitor name: SM2333T
[ 151.312] (II) RADEON(0): Serial No: HVRZC00505
[ 151.312] (II) RADEON(0): EDID (in hex):
[ 151.312] (II) RADEON(0): 00ffffffffffff004c2d360733324d43
[ 151.312] (II) RADEON(0): 331401030e331d782aee91a3544c9926
[ 151.312] (II) RADEON(0): 0f50542308008100814081809500b300
[ 151.312] (II) RADEON(0): a94001010101023a801871382d40582c
[ 151.312] (II) RADEON(0): 4500dd0c1100001e000000fd00383d1e
[ 151.312] (II) RADEON(0): 4b11000a202020202020000000fc0053
[ 151.312] (II) RADEON(0): 4d32333333540a2020202020000000ff
[ 151.312] (II) RADEON(0): 004856525a4330303530350a20200083
[ 151.312] (II) RADEON(0): Printing probed modes for output DVI-1
[ 151.312] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 151.312] (II) RADEON(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 151.312] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 151.312] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 151.312] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 151.312] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 151.312] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
[ 151.312] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 151.312] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 151.312] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 151.312] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 151.312] (II) RADEON(0): Output DisplayPort-0 disconnected
[ 151.312] (II) RADEON(0): Output DisplayPort-1 disconnected
[ 151.312] (II) RADEON(0): Output HDMI-0 disconnected
[ 151.312] (II) RADEON(0): Output DVI-0 disconnected
[ 151.312] (II) RADEON(0): Output DVI-1 connected
[ 151.312] (II) RADEON(0): Using exact sizes for initial modes
[ 151.312] (II) RADEON(0): Output DVI-1 using initial mode 1920x1080
[ 151.312] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 151.312] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:80000000 visible:f7d7000
[ 151.312] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 151.312] (==) RADEON(0): DPI set to (96, 96)
[ 151.312] (II) Loading sub module "fb"
[ 151.312] (II) LoadModule: "fb"
[ 151.312] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 151.312] (II) Module fb: vendor="X.Org Foundation"
[ 151.312] compiled for 1.10.2, module version = 1.0.0
[ 151.312] ABI class: X.Org ANSI C Emulation, version 0.4
[ 151.312] (II) Loading sub module "ramdac"
[ 151.312] (II) LoadModule: "ramdac"
[ 151.312] (II) Module "ramdac" already built-in
[ 151.312] (--) Depth 24 pixmap format is 32 bpp
[ 151.312] (II) RADEON(0): [DRI2] Setup complete
[ 151.312] (II) RADEON(0): [DRI2] DRI driver: r600
[ 151.312] (II) RADEON(0): Front buffer size: 8100K
[ 151.312] (II) RADEON(0): VRAM usage limit set to 221119K
[ 151.312] (==) RADEON(0): Backing store disabled
[ 151.312] (II) RADEON(0): Direct rendering enabled
[ 151.312] (II) RADEON(0): Setting EXA maxPitchBytes
[ 151.313] (II) EXA(0): Driver allocated offscreen pixmaps
[ 151.313] (II) EXA(0): Driver registered support for the following operations:
[ 151.313] (II) Solid
[ 151.313] (II) Copy
[ 151.313] (II) Composite (RENDER acceleration)
[ 151.313] (II) UploadToScreen
[ 151.313] (II) DownloadFromScreen
[ 151.313] (II) RADEON(0): Acceleration enabled
[ 151.313] (==) RADEON(0): DPMS enabled
[ 151.313] (==) RADEON(0): Silken mouse enabled
[ 151.313] (II) RADEON(0): Set up textured video
[ 151.313] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 151.313] (--) RandR disabled
[ 151.313] (II) Initializing built-in extension Generic Event Extension
[ 151.313] (II) Initializing built-in extension SHAPE
[ 151.313] (II) Initializing built-in extension MIT-SHM
[ 151.313] (II) Initializing built-in extension XInputExtension
[ 151.313] (II) Initializing built-in extension XTEST
[ 151.313] (II) Initializing built-in extension BIG-REQUESTS
[ 151.313] (II) Initializing built-in extension SYNC
[ 151.313] (II) Initializing built-in extension XKEYBOARD
[ 151.313] (II) Initializing built-in extension XC-MISC
[ 151.313] (II) Initializing built-in extension SECURITY
[ 151.313] (II) Initializing built-in extension XINERAMA
[ 151.313] (II) Initializing built-in extension XFIXES
[ 151.313] (II) Initializing built-in extension RENDER
[ 151.313] (II) Initializing built-in extension RANDR
[ 151.313] (II) Initializing built-in extension COMPOSITE
[ 151.313] (II) Initializing built-in extension DAMAGE
[ 151.317] (EE) AIGLX error: Calling driver entry point failed
[ 151.317] (EE) AIGLX: reverting to software rendering
[ 151.317] (II) AIGLX: Screen 0 is not DRI capable
[ 151.318] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
[ 151.318] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 151.318] (II) RADEON(0): Setting screen physical size to 508 x 285
[ 151.343] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 151.343] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 151.343] (II) LoadModule: "evdev"
[ 151.343] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.343] (II) Module evdev: vendor="X.Org Foundation"
[ 151.343] compiled for 1.10.0, module version = 2.6.0
[ 151.344] Module class: X.Org XInput Driver
[ 151.344] ABI class: X.Org XInput driver, version 12.2
[ 151.344] (II) Using input driver 'evdev' for 'Power Button'
[ 151.344] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.344] (**) Power Button: always reports core events
[ 151.344] (**) Power Button: Device: "/dev/input/event1"
[ 151.363] (--) Power Button: Found keys
[ 151.363] (II) Power Button: Configuring as keyboard
[ 151.363] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 151.363] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 151.363] (**) Option "xkb_rules" "evdev"
[ 151.363] (**) Option "xkb_model" "evdev"
[ 151.363] (**) Option "xkb_layout" "us"
[ 151.378] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 151.378] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 151.378] (II) Using input driver 'evdev' for 'Power Button'
[ 151.378] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.378] (**) Power Button: always reports core events
[ 151.378] (**) Power Button: Device: "/dev/input/event0"
[ 151.403] (--) Power Button: Found keys
[ 151.403] (II) Power Button: Configuring as keyboard
[ 151.403] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 151.403] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 151.403] (**) Option "xkb_rules" "evdev"
[ 151.403] (**) Option "xkb_model" "evdev"
[ 151.403] (**) Option "xkb_layout" "us"
[ 151.404] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event4)
[ 151.404] (II) No input driver/identifier specified (ignoring)
[ 151.406] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event5)
[ 151.406] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "evdev keyboard catchall"
[ 151.406] (II) Using input driver 'evdev' for 'Microsoft Comfort Curve Keyboard 2000'
[ 151.406] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.406] (**) Microsoft Comfort Curve Keyboard 2000: always reports core events
[ 151.406] (**) Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event5"
[ 151.433] (--) Microsoft Comfort Curve Keyboard 2000: Found keys
[ 151.433] (II) Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard
[ 151.433] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5/event5"
[ 151.433] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD)
[ 151.433] (**) Option "xkb_rules" "evdev"
[ 151.433] (**) Option "xkb_model" "evdev"
[ 151.433] (**) Option "xkb_layout" "us"
[ 151.433] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event6)
[ 151.433] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "evdev keyboard catchall"
[ 151.433] (II) Using input driver 'evdev' for 'Microsoft Comfort Curve Keyboard 2000'
[ 151.433] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.433] (**) Microsoft Comfort Curve Keyboard 2000: always reports core events
[ 151.433] (**) Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event6"
[ 151.456] (--) Microsoft Comfort Curve Keyboard 2000: Found 1 mouse buttons
[ 151.456] (--) Microsoft Comfort Curve Keyboard 2000: Found scroll wheel(s)
[ 151.456] (--) Microsoft Comfort Curve Keyboard 2000: Found relative axes
[ 151.456] (--) Microsoft Comfort Curve Keyboard 2000: Found absolute axes
[ 151.456] (--) Microsoft Comfort Curve Keyboard 2000: Found keys
[ 151.456] (II) Microsoft Comfort Curve Keyboard 2000: Configuring as mouse
[ 151.456] (II) Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard
[ 151.456] (II) Microsoft Comfort Curve Keyboard 2000: Adding scrollwheel support
[ 151.456] (**) Microsoft Comfort Curve Keyboard 2000: YAxisMapping: buttons 4 and 5
[ 151.456] (**) Microsoft Comfort Curve Keyboard 2000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 151.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input6/event6"
[ 151.456] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD)
[ 151.456] (**) Option "xkb_rules" "evdev"
[ 151.456] (**) Option "xkb_model" "evdev"
[ 151.456] (**) Option "xkb_layout" "us"
[ 151.457] (EE) Microsoft Comfort Curve Keyboard 2000: failed to initialize for relative axes.
[ 151.457] (II) Microsoft Comfort Curve Keyboard 2000: initialized for absolute axes.
[ 151.457] (**) Microsoft Comfort Curve Keyboard 2000: (accel) keeping acceleration scheme 1
[ 151.457] (**) Microsoft Comfort Curve Keyboard 2000: (accel) acceleration profile 0
[ 151.457] (**) Microsoft Comfort Curve Keyboard 2000: (accel) acceleration factor: 2.000
[ 151.457] (**) Microsoft Comfort Curve Keyboard 2000: (accel) acceleration threshold: 4
[ 151.458] (II) config/udev: Adding input device Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel (/dev/input/event7)
[ 151.458] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Applying InputClass "evdev pointer catchall"
[ 151.458] (II) Using input driver 'evdev' for 'Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel'
[ 151.458] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.458] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: always reports core events
[ 151.458] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Device: "/dev/input/event7"
[ 151.483] (--) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Found 9 mouse buttons
[ 151.483] (--) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Found scroll wheel(s)
[ 151.483] (--) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Found relative axes
[ 151.483] (--) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Found x and y relative axes
[ 151.483] (II) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Configuring as mouse
[ 151.483] (II) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Adding scrollwheel support
[ 151.483] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: YAxisMapping: buttons 4 and 5
[ 151.483] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 151.483] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input7/event7"
[ 151.483] (II) XINPUT: Adding extended input device "Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel" (type: MOUSE)
[ 151.483] (II) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: initialized for relative axes.
[ 151.483] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: (accel) keeping acceleration scheme 1
[ 151.483] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: (accel) acceleration profile 0
[ 151.483] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: (accel) acceleration factor: 2.000
[ 151.483] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: (accel) acceleration threshold: 4
[ 151.483] (II) config/udev: Adding input device Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel (/dev/input/mouse0)
[ 151.483] (II) No input driver/identifier specified (ignoring)
[ 151.485] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event3)
[ 151.485] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 151.485] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 151.485] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.485] (**) Eee PC WMI hotkeys: always reports core events
[ 151.485] (**) Eee PC WMI hotkeys: Device: "/dev/input/event3"
[ 151.510] (--) Eee PC WMI hotkeys: Found keys
[ 151.510] (II) Eee PC WMI hotkeys: Configuring as keyboard
[ 151.510] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input3/event3"
[ 151.510] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
[ 151.510] (**) Option "xkb_rules" "evdev"
[ 151.510] (**) Option "xkb_model" "evdev"
[ 151.510] (**) Option "xkb_layout" "us"
[ 151.510] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 151.510] (II) No input driver/identifier specified (ignoring)
[ 151.592] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 151.592] (II) RADEON(0): Using EDID range info for horizontal sync
[ 151.592] (II) RADEON(0): Using EDID range info for vertical refresh
[ 151.592] (II) RADEON(0): Printing DDC gathered Modelines:
[ 151.592] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 151.592] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 151.592] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 151.592] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 151.592] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 151.592] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 151.592] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 151.592] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 151.592] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 151.592] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 151.592] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 151.732] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 151.732] (II) RADEON(0): Using hsync ranges from config file
[ 151.732] (II) RADEON(0): Using vrefresh ranges from config file
[ 151.732] (II) RADEON(0): Printing DDC gathered Modelines:
[ 151.732] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 151.732] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 151.732] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 151.732] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 151.732] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 151.732] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 151.732] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 151.732] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 151.732] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 151.732] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 151.732] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 151.805] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 151.805] (II) RADEON(0): Using hsync ranges from config file
[ 151.805] (II) RADEON(0): Using vrefresh ranges from config file
[ 151.805] (II) RADEON(0): Printing DDC gathered Modelines:
[ 151.805] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 151.805] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 151.805] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 151.805] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 151.805] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 151.805] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 151.805] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 151.805] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 151.805] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 151.805] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 151.805] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 151.885] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 151.885] (II) RADEON(0): Using hsync ranges from config file
[ 151.885] (II) RADEON(0): Using vrefresh ranges from config file
[ 151.885] (II) RADEON(0): Printing DDC gathered Modelines:
[ 151.885] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 151.885] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 151.885] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 151.885] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 151.885] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 151.885] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 151.885] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 151.885] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 151.885] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 151.885] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 151.885] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 151.958] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 151.958] (II) RADEON(0): Using hsync ranges from config file
[ 151.958] (II) RADEON(0): Using vrefresh ranges from config file
[ 151.958] (II) RADEON(0): Printing DDC gathered Modelines:
[ 151.958] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 151.958] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 151.958] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 151.958] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 151.958] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 151.958] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 151.958] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 151.958] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 151.958] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 151.958] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 151.958] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 156.162] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 156.162] (II) RADEON(0): Using hsync ranges from config file
[ 156.162] (II) RADEON(0): Using vrefresh ranges from config file
[ 156.162] (II) RADEON(0): Printing DDC gathered Modelines:
[ 156.162] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 156.162] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 156.162] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 156.162] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 156.162] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 156.162] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 156.162] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 156.162] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 156.162] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 156.162] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 156.162] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 157.229] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 157.229] (II) RADEON(0): Using hsync ranges from config file
[ 157.229] (II) RADEON(0): Using vrefresh ranges from config file
[ 157.229] (II) RADEON(0): Printing DDC gathered Modelines:
[ 157.229] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 157.229] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 157.229] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 157.229] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 157.229] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 157.229] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 157.229] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 157.229] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 157.229] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 157.229] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 157.229] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 157.308] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 157.308] (II) RADEON(0): Using hsync ranges from config file
[ 157.308] (II) RADEON(0): Using vrefresh ranges from config file
[ 157.308] (II) RADEON(0): Printing DDC gathered Modelines:
[ 157.308] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 157.308] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 157.308] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 157.308] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 157.308] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 157.308] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 157.308] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 157.308] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 157.308] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 157.308] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 157.308] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 157.902] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 157.902] (II) RADEON(0): Using hsync ranges from config file
[ 157.902] (II) RADEON(0): Using vrefresh ranges from config file
[ 157.902] (II) RADEON(0): Printing DDC gathered Modelines:
[ 157.902] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 157.902] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 157.902] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 157.902] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 157.902] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 157.902] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 157.902] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 157.902] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 157.902] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 157.902] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 157.902] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 157.978] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 157.978] (II) RADEON(0): Using hsync ranges from config file
[ 157.978] (II) RADEON(0): Using vrefresh ranges from config file
[ 157.978] (II) RADEON(0): Printing DDC gathered Modelines:
[ 157.978] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 157.978] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 157.978] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 157.978] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 157.978] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 157.978] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 157.978] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 157.978] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 157.978] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 157.978] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 157.978] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 158.056] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 158.056] (II) RADEON(0): Using hsync ranges from config file
[ 158.056] (II) RADEON(0): Using vrefresh ranges from config file
[ 158.056] (II) RADEON(0): Printing DDC gathered Modelines:
[ 158.056] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 158.056] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 158.056] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 158.056] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 158.056] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 158.056] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 158.056] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 158.056] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 158.056] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 158.056] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 158.056] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 158.915] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 158.915] (II) RADEON(0): Using hsync ranges from config file
[ 158.915] (II) RADEON(0): Using vrefresh ranges from config file
[ 158.915] (II) RADEON(0): Printing DDC gathered Modelines:
[ 158.915] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 158.915] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 158.915] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 158.915] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 158.915] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 158.915] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 158.915] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 158.915] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 158.915] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 158.915] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 158.915] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 162.988] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 162.988] (II) RADEON(0): Using hsync ranges from config file
[ 162.988] (II) RADEON(0): Using vrefresh ranges from config file
[ 162.988] (II) RADEON(0): Printing DDC gathered Modelines:
[ 162.988] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 162.988] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 162.988] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 162.988] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 162.988] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 162.988] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 162.988] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 162.988] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 162.988] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 162.988] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 162.988] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 166.595] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 166.595] (II) RADEON(0): Using hsync ranges from config file
[ 166.595] (II) RADEON(0): Using vrefresh ranges from config file
[ 166.595] (II) RADEON(0): Printing DDC gathered Modelines:
[ 166.595] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 166.595] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 166.595] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 166.595] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 166.595] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 166.595] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 166.595] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 166.595] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 166.595] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 166.595] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 166.595] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
And more commands:
[root@yakir-arch ~]# glxinfo | grep -i opengl
Unknown chipset 0x6719
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on softpipe
OpenGL version string: 2.1 Mesa 7.10.2
OpenGL shading language version string: 1.20
OpenGL extensions:
[root@yakir-arch ~]# glxinfo | grep dire
Unknown chipset 0x6719
direct rendering: Yes
[root@yakir-arch ~]# dmesg | grep drm
[ 1.336436] [drm] Initialized drm 1.1.0 20060810
[ 1.358306] [drm] radeon defaulting to kernel modesetting.
[ 1.358371] [drm] radeon kernel modesetting enabled.
[ 1.359832] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6719).
[ 1.359961] [drm] register mmio base: 0xFE620000
[ 1.360031] [drm] register mmio size: 131072
[ 1.360464] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 1.360526] [drm] RAM width 256bits DDR
[ 1.360894] [drm] radeon: 2048M of VRAM memory ready
[ 1.360957] [drm] radeon: 512M of GTT memory ready.
[ 1.361025] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.361088] [drm] Driver supports precise vblank timestamp query.
[ 1.361268] [drm] radeon: irq initialized.
[ 1.361331] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.361684] [drm] Loading CAYMAN Microcode
[ 1.385086] [drm] ring test succeeded in 1 usecs
[ 1.385214] [drm] radeon: ib pool ready.
[ 1.385372] [drm] ib test succeeded in 0 usecs
[ 1.385938] [drm] Radeon Display Connectors
[ 1.386008] [drm] Connector 0:
[ 1.386076] [drm] DisplayPort
[ 1.386146] [drm] HPD5
[ 1.386209] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 1.386280] [drm] Encoders:
[ 1.386345] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.386426] [drm] Connector 1:
[ 1.386489] [drm] DisplayPort
[ 1.386551] [drm] HPD4
[ 1.386616] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 1.386685] [drm] Encoders:
[ 1.386748] [drm] DFP2: INTERNAL_UNIPHY2
[ 1.386812] [drm] Connector 2:
[ 1.386874] [drm] HDMI-A
[ 1.386936] [drm] HPD6
[ 1.386999] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 1.387068] [drm] Encoders:
[ 1.387131] [drm] DFP3: INTERNAL_UNIPHY1
[ 1.387194] [drm] Connector 3:
[ 1.387257] [drm] DVI-D
[ 1.387319] [drm] HPD1
[ 1.387382] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 1.387454] [drm] Encoders:
[ 1.387518] [drm] DFP4: INTERNAL_UNIPHY1
[ 1.387580] [drm] Connector 4:
[ 1.387641] [drm] DVI-I
[ 1.387702] [drm] HPD3
[ 1.387763] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 1.387831] [drm] Encoders:
[ 1.387893] [drm] DFP5: INTERNAL_UNIPHY
[ 1.387955] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.259873] [drm] Internal thermal controller with fan control
[ 2.260918] [drm] radeon: power management initialized
[ 2.331033] [drm] fb mappable at 0xC0140000
[ 2.331093] [drm] vram apper at 0xC0000000
[ 2.331152] [drm] size 8294400
[ 2.331210] [drm] fb depth is 24
[ 2.331268] [drm] pitch is 7680
[ 2.331359] fbcon: radeondrmfb (fb0) is primary device
[ 2.542497] fb0: radeondrmfb frame buffer device
[ 2.542497] drm: registered panic notifier
[ 2.542500] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on minor 0
[ 29.818060] Modules linked in: eeepc_wmi(+) asus_wmi snd sparse_keymap rfkill pci_hotplug ehci_hcd soundcore wmi ppdev snd_page_alloc parport_pc r8169 usbcore i2c_i801 evdev parport intel_agp sg intel_gtt pcspkr processor button video iTCO_wdt iTCO_vendor_support serio_raw mii fuse ext4 mbcache jbd2 crc16 sd_mod atKingYes wrote:
[root@yakir-arch ~]# glxinfo | grep -i opengl
Unknown chipset 0x6719
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on softpipe
EDIT:In the glxinfo command its say 'OpenGL vendor string: VMware, Inc'. Why?
I don't really know it but "Unknown chipset" sounds like the card may be so new that it is not yet supported, even in testing. "softpipe" means that it is using software rendering instead of the actual 3d hardware.
It probably will work with newer git versions from mesa and xf86-video-ati and maybe the radeon branch of the kernel. All is found in the inofficial [radeon] repository:
https://bbs.archlinux.org/viewtopic.php?id=79509 -
Nautilus is not working in gnome3
Hello everyone, I'm trying to open a nautilus window in gnome3 but it's not working and I don't know what's going on. I've some folders in Desktop and I can open nautilus there but in Activities --> Files nothing happens.
In the terminal I run nautilus and still is not working, no error, nothing...
I don't know what it's happening because it was working in gnome3, I don't know whether a recent upgrade broke something.
Thanks in advanceWell I really didn't know it was a compatibility issue. You're right, I installed gnome-tweak-tool but I don't know what did I check to obtain this behaviour.
BR
Last edited by Koven (2011-05-11 21:26:09) -
Suspend to RAM no longer works, even in a console
I've recently installed Arch on an SSD (OCZ Vertex 2) and I have testing repo enabled. I can get the laptop to suspend outside of KDE using pm-suspend, but the system never comes back after pressing a key. The cursor just stays there. The caps lock key still toggles, but I can't shutdown using the power button.
In KDE when I close the lid it doesn't do anything.
When I first set up KDE suspend worked....I'm not sure what package broke it, but could anyone have any ideas?
Here are my installed packages:
a52dec 0.7.4-4
aalib 1.4rc5-7
acl 2.2.49-1
acpi 1.4-2
acpid 1.0.10-3
akonadi 1.4.1-1
akonadi-googledata 1.2.0-1
alsa-lib 1.0.23-2
alsa-utils 1.0.23-2
antlr 2.7.7-8
apr 1.4.2-1
apr-util 1.3.10-1
aria2 1.10.3-1
aspell 0.60.6-4
atk 1.32.0-1
attica 0.1.4-1
attr 2.4.44-1
autoconf 2.68-1
automake 1.11.1-1
automoc4 0.9.88-1
avahi 0.6.27-7
avogadro 1.0.1-1
babl 0.1.2-1
bash 4.1.007-1
beautiful-soup 3.1.0.1-4
binutils 2.20.1-4
bison 2.4.3-1
blas 3.2.2-2
boost 1.43.0-2
boost-libs 1.43.0-2
bzip2 1.0.6-1
c-ares 1.7.3-1
ca-certificates 20090814+nmu2-1
ca-certificates-java 20100412-1
cabextract 1.3-1
cairo 1.10.0-2
cdparanoia 10.2-2
cfitsio 3.250-2
cherrypy 3.1.2-3
chmlib 0.40-1
chromium 7.0.517.43-1
cln 1.2.2-3
cloog-ppl 0.15.9-2
clucene 0.9.21b-1
clyde-git 20101027-1
cmake 2.8.2-3
compositeproto 0.4.1-1
consolekit 0.4.2-1
coreutils 8.6-1
cracklib 2.8.16-1
cryptsetup 1.1.3-1
curl 7.21.2-2
damageproto 1.2.0-1
dash 0.5.6.1-1
db 4.8.26-2
dbus 1.4.0-1
dbus-core 1.4.0-1
dbus-glib 0.86-1
dbus-python 0.83.1-2
dcron 4.4-2
desktop-file-utils 0.16-1
device-mapper 2.02.74-1
dhcpcd 5.2.8-1
dialog 1.1_20100428-2
diffutils 3.0-1
dirmngr 1.1.0-1
djvulibre 3.5.23-1
dmidecode 2.10-1
dmxproto 2.3-1
dnsutils 9.7.1.P2-1
dri2proto 2.3-1
e2fsprogs 1.41.12-1
ebook-tools 0.2.1-1
eigen 2.0.15-1
eject 2.1.5-4
elfutils 0.149-2
enca 1.13-1
enchant 1.6.0-1
ethtool 6-2
eventlog 0.2.12-1
exiv2 0.20-1
expat 2.0.1-5
faac 1.28-2
faad2 2.7-1
fakeroot 1.14.4-2
farsight2 0.0.21-2
ffmpeg 25472-1
fftw 3.2.2-1
file 5.04-2
filesystem 2010.10-1
findutils 4.4.2-2
fixesproto 4.1.1-1
flac 1.2.1-2
flashplugin-prerelease 10.2.161.23-1
flex 2.5.35-4
fluidsynth 1.1.3-1
fontconfig 2.8.0-1
fontsproto 2.1.0-1
freeglut 2.6.0-1
freetype2 2.4.3-1
fribidi 0.19.2-1
gawk 3.1.8-1
gcc 4.5.1-1
gcc-libs 4.5.1-1
gconf 2.32.0-1
gdbm 1.8.3-7
gdk-pixbuf2 2.22.0-2
gegl 0.1.2-1
gen-init-cpio 2.6.32-1
gettext 0.18.1.1-1
ggz-client-libs 0.0.14.1-1
ghostscript 9.00-1
giflib 4.1.6-3
gimp 2.6.11-1
git 1.7.3.2-1
glew 1.5.6-1
glib2 2.26.0-2
glibc 2.12.1-4
glproto 1.4.12-1
gmp 5.0.1-1
gnugo 3.8-1
gnupg 1.4.11-1
gnupg2 2.0.16-2
gnutls 2.8.6-1
gobject-introspection 0.9.12-1
gpgme 1.3.0-1
gpm 1.20.6-5
gpsd 2.95-4
grep 2.7-1
groff 1.20.1-4
grub 0.97-17
gsfonts 1.0.7pre44-2
gsl 1.14-1
gstreamer0.10 0.10.30-1
gstreamer0.10-base 0.10.30-1
gstreamer0.10-base-plugins 0.10.30-1
gstreamer0.10-python 0.10.18-3
gtk2 2.22.0-5
gzip 1.4-1
hal 0.5.14-4
hal-info 0.20091130-1
heimdal 1.3.3-1
hicolor-icon-theme 0.12-1
htop 0.8.3-1
huludesktop 0.9.8-3
hunspell 1.2.12-1
iana-etc 2.30-1
ilmbase 1.0.1-1
imagemagick 6.6.4.10-1
imlib2 1.4.4-1
initscripts 2010.07-1
inputproto 2.0-1
intel-dri 7.9-1
iputils 20100214-2
iso-codes 3.14-1
jack 0.118.0-4
jasper 1.900.1-6
jfsutils 1.1.14-1
kbd 1.15.2-1
kbproto 1.0.5-1
kde-agent 20090801-2
kdeaccessibility-colorschemes 4.5.2-1
kdeaccessibility-iconthemes 4.5.2-1
kdeaccessibility-kmag 4.5.2-1
kdeaccessibility-kmousetool 4.5.2-1
kdeaccessibility-kmouth 4.5.2-1
kdeadmin-kcron 4.5.2-1
kdeadmin-ksystemlog 4.5.2-1
kdeadmin-kuser 4.5.2-1
kdeadmin-system-config-printer-kde 4.5.2-1
kdeartwork-aurorae 4.5.2-1
kdeartwork-colorschemes 4.5.2-1
kdeartwork-desktopthemes 4.5.2-1
kdeartwork-emoticons 4.5.2-1
kdeartwork-iconthemes 4.5.2-1
kdeartwork-kscreensaver 4.5.2-1
kdeartwork-sounds 4.5.2-1
kdeartwork-styles 4.5.2-1
kdeartwork-wallpapers 4.5.2-1
kdeartwork-weatherwallpapers 4.5.2-1
kdebase-dolphin 4.5.2-1
kdebase-kdepasswd 4.5.2-1
kdebase-kdialog 4.5.2-1
kdebase-kfind 4.5.2-1
kdebase-konqueror 4.5.2-1
kdebase-konsole 4.5.2-1
kdebase-kwrite 4.5.2-1
kdebase-lib 4.5.2-1
kdebase-plasma 4.5.2-1
kdebase-runtime 4.5.2-2
kdebase-workspace 4.5.2-2
kdebindings-python 4.5.2-8
kdeedu-blinken 4.5.2-2
kdeedu-cantor 4.5.2-2
kdeedu-data 4.5.2-2
kdeedu-kalgebra 4.5.2-2
kdeedu-kalzium 4.5.2-2
kdeedu-kanagram 4.5.2-2
kdeedu-kbruch 4.5.2-2
kdeedu-kgeography 4.5.2-2
kdeedu-khangman 4.5.2-2
kdeedu-kig 4.5.2-2
kdeedu-kiten 4.5.2-2
kdeedu-klettres 4.5.2-2
kdeedu-kmplot 4.5.2-2
kdeedu-kstars 4.5.2-2
kdeedu-ktouch 4.5.2-2
kdeedu-kturtle 4.5.2-2
kdeedu-kwordquiz 4.5.2-2
kdeedu-libkdeedu 4.5.2-2
kdeedu-marble 4.5.2-2
kdeedu-parley 4.5.2-2
kdeedu-rocs 4.5.2-2
kdeedu-step 4.5.2-2
kdegames-bomber 4.5.2-1
kdegames-bovo 4.5.2-1
kdegames-granatier 4.5.2-1
kdegames-kajongg 4.5.2-1
kdegames-kapman 4.5.2-1
kdegames-katomic 4.5.2-1
kdegames-kbattleship 4.5.2-1
kdegames-kblackbox 4.5.2-1
kdegames-kblocks 4.5.2-1
kdegames-kbounce 4.5.2-1
kdegames-kbreakout 4.5.2-1
kdegames-kdiamond 4.5.2-1
kdegames-kfourinline 4.5.2-1
kdegames-kgoldrunner 4.5.2-1
kdegames-kigo 4.5.2-1
kdegames-killbots 4.5.2-1
kdegames-kiriki 4.5.2-1
kdegames-kjumpingcube 4.5.2-1
kdegames-klines 4.5.2-1
kdegames-kmahjongg 4.5.2-1
kdegames-kmines 4.5.2-1
kdegames-knetwalk 4.5.2-1
kdegames-kolf 4.5.2-1
kdegames-kollision 4.5.2-1
kdegames-konquest 4.5.2-1
kdegames-kpatience 4.5.2-1
kdegames-kreversi 4.5.2-1
kdegames-ksame 4.5.2-1
kdegames-kshisen 4.5.2-1
kdegames-ksirk 4.5.2-1
kdegames-kspaceduel 4.5.2-1
kdegames-ksquares 4.5.2-1
kdegames-ksudoku 4.5.2-1
kdegames-ktron 4.5.2-1
kdegames-ktuberling 4.5.2-1
kdegames-kubrick 4.5.2-1
kdegames-libkdegames 4.5.2-1
kdegames-libkmahjongg 4.5.2-1
kdegames-lskat 4.5.2-1
kdegames-palapeli 4.5.2-1
kdegraphics-gwenview 4.5.2-2
kdegraphics-kamera 4.5.2-2
kdegraphics-kcolorchooser 4.5.2-2
kdegraphics-kgamma 4.5.2-2
kdegraphics-kolourpaint 4.5.2-2
kdegraphics-kruler 4.5.2-2
kdegraphics-ksnapshot 4.5.2-2
kdegraphics-libs 4.5.2-2
kdegraphics-okular 4.5.2-2
kdelibs 4.5.2-2
kdemultimedia-dragonplayer 4.5.2-1
kdemultimedia-ffmpegthumbs 4.5.2-1
kdemultimedia-juk 4.5.2-1
kdemultimedia-kioslave 4.5.2-1
kdemultimedia-kmix 4.5.2-1
kdemultimedia-kscd 4.5.2-1
kdemultimedia-mplayerthumbs 4.5.2-1
kdenetwork-filesharing 4.5.2-1
kdenetwork-kdnssd 4.5.2-1
kdenetwork-kget 4.5.2-1
kdenetwork-kopete 4.5.2-1
kdenetwork-kppp 4.5.2-1
kdenetwork-krdc 4.5.2-1
kdenetwork-krfb 4.5.2-1
kdepim-akonadiconsole 4.4.7-1
kdepim-akregator 4.4.7-1
kdepim-blogilo 4.4.7-1
kdepim-console 4.4.7-1
kdepim-kaddressbook 4.4.7-1
kdepim-kalarm 4.4.7-1
kdepim-kjots 4.4.7-1
kdepim-kleopatra 4.4.7-1
kdepim-kmail 4.4.7-1
kdepim-knode 4.4.7-1
kdepim-knotes 4.4.7-1
kdepim-kontact 4.4.7-1
kdepim-korganizer 4.4.7-1
kdepim-kresources 4.4.7-1
kdepim-ktimetracker 4.4.7-1
kdepim-libkdepim 4.4.7-1
kdepim-runtime 4.4.7-1
kdepim-wizards 4.4.7-1
kdepimlibs 4.5.2-1
kdeplasma-addons-applets-bball 4.5.2-1
kdeplasma-addons-applets-binary-clock 4.5.2-1
kdeplasma-addons-applets-blackboard 4.5.2-1
kdeplasma-addons-applets-bookmarks 4.5.2-1
kdeplasma-addons-applets-bubblemon 4.5.2-1
kdeplasma-addons-applets-calculator 4.5.2-1
kdeplasma-addons-applets-charselect 4.5.2-1
kdeplasma-addons-applets-comic 4.5.2-1
kdeplasma-addons-applets-community 4.5.2-1
kdeplasma-addons-applets-dict 4.5.2-1
kdeplasma-addons-applets-eyes 4.5.2-1
kdeplasma-addons-applets-fifteenpuzzle 4.5.2-1
kdeplasma-addons-applets-filewatcher 4.5.2-1
kdeplasma-addons-applets-frame 4.5.2-1
kdeplasma-addons-applets-fuzzy-clock 4.5.2-1
kdeplasma-addons-applets-incomingmsg 4.5.2-1
kdeplasma-addons-applets-kdeobservatory 4.5.2-1
kdeplasma-addons-applets-kimpanel 4.5.2-1
kdeplasma-addons-applets-knowledgebase 4.5.2-1
kdeplasma-addons-applets-kolourpicker 4.5.2-1
kdeplasma-addons-applets-konqprofiles 4.5.2-1
kdeplasma-addons-applets-konsoleprofiles 4.5.2-1
kdeplasma-addons-applets-lancelot 4.5.2-1
kdeplasma-addons-applets-leavenote 4.5.2-1
kdeplasma-addons-applets-life 4.5.2-1
kdeplasma-addons-applets-luna 4.5.2-1
kdeplasma-addons-applets-magnifique 4.5.2-1
kdeplasma-addons-applets-mediaplayer 4.5.2-1
kdeplasma-addons-applets-microblog 4.5.2-1
kdeplasma-addons-applets-news 4.5.2-1
kdeplasma-addons-applets-notes 4.5.2-1
kdeplasma-addons-applets-nowplaying 4.5.2-1
kdeplasma-addons-applets-paste 4.5.2-1
kdeplasma-addons-applets-pastebin 4.5.2-1
kdeplasma-addons-applets-plasmaboard 4.5.2-1
kdeplasma-addons-applets-previewer 4.5.2-1
kdeplasma-addons-applets-qalculate 4.5.2-1
kdeplasma-addons-applets-rememberthemilk 4.5.2-1
kdeplasma-addons-applets-rssnow 4.5.2-1
kdeplasma-addons-applets-showdashboard 4.5.2-1
kdeplasma-addons-applets-showdesktop 4.5.2-1
kdeplasma-addons-applets-social-news 4.5.2-1
kdeplasma-addons-applets-spellcheck 4.5.2-1
kdeplasma-addons-applets-systemloadviewer 4.5.2-1
kdeplasma-addons-applets-timer 4.5.2-1
kdeplasma-addons-applets-unitconverter 4.5.2-1
kdeplasma-addons-applets-weather 4.5.2-1
kdeplasma-addons-applets-weatherstation 4.5.2-1
kdeplasma-addons-applets-webslice 4.5.2-1
kdeplasma-addons-libs 4.5.2-1
kdeplasma-addons-runners-audioplayercontrol 4.5.2-1
kdeplasma-addons-runners-browserhistory 4.5.2-1
kdeplasma-addons-runners-characters 4.5.2-1
kdeplasma-addons-runners-contacts 4.5.2-1
kdeplasma-addons-runners-converter 4.5.2-1
kdeplasma-addons-runners-datetime 4.5.2-1
kdeplasma-addons-runners-katesessions 4.5.2-1
kdeplasma-addons-runners-konquerorsessions 4.5.2-1
kdeplasma-addons-runners-konsolesessions 4.5.2-1
kdeplasma-addons-runners-kopete 4.5.2-1
kdeplasma-addons-runners-mediawiki 4.5.2-1
kdeplasma-addons-runners-spellchecker 4.5.2-1
kdeplasma-addons-wallpapers-mandelbrot 4.5.2-1
kdeplasma-addons-wallpapers-marble 4.5.2-1
kdeplasma-addons-wallpapers-pattern 4.5.2-1
kdeplasma-addons-wallpapers-virus 4.5.2-1
kdeplasma-addons-wallpapers-weather 4.5.2-1
kdesdk-cervisia 4.5.2-1
kdesdk-dolphin-plugins 4.5.2-1
kdesdk-kapptemplate 4.5.2-1
kdesdk-kate 4.5.2-1
kdesdk-kbugbuster 4.5.2-1
kdesdk-kcachegrind 4.5.2-1
kdesdk-kdeaccounts-plugin 4.5.2-1
kdesdk-kdepalettes 4.5.2-1
kdesdk-kioslave 4.5.2-1
kdesdk-kmtrace 4.5.2-1
kdesdk-kompare 4.5.2-1
kdesdk-kpartloader 4.5.2-1
kdesdk-kprofilemethod 4.5.2-1
kdesdk-kstartperf 4.5.2-1
kdesdk-kuiviewer 4.5.2-1
kdesdk-lokalize 4.5.2-1
kdesdk-poxml 4.5.2-1
kdesdk-scripts 4.5.2-1
kdesdk-strigi-analyzer 4.5.2-1
kdesdk-umbrello 4.5.2-1
kdetoys-amor 4.5.2-1
kdetoys-kteatime 4.5.2-1
kdetoys-ktux 4.5.2-1
kdeutils-ark 4.5.2-2
kdeutils-kcalc 4.5.2-2
kdeutils-kcharselect 4.5.2-2
kdeutils-kdf 4.5.2-2
kdeutils-kfloppy 4.5.2-2
kdeutils-kgpg 4.5.2-2
kdeutils-kremotecontrol 4.5.2-2
kdeutils-ktimer 4.5.2-2
kdeutils-kwallet 4.5.2-2
kdeutils-okteta 4.5.2-2
kdeutils-printer-applet 4.5.2-2
kdeutils-superkaramba 4.5.2-2
kdeutils-sweeper 4.5.2-2
kdewebdev-kfilereplace 4.5.2-1
kdewebdev-kimagemapeditor 4.5.2-1
kdewebdev-klinkstatus 4.5.2-1
kdewebdev-kommander 4.5.2-1
kernel26 2.6.35.7-1
kernel26-headers 2.6.35.7-1
ksplash-theme-generator 0.4-1
kwebkitpart 0.9.6-1
lame 3.98.4-1
lapack 3.2.2-2
lcms 1.19-1
less 436-1
lesstif 0.95.2-2
lib32-alsa-lib 1.0.23-4
lib32-expat 2.0.1-7
lib32-fontconfig 2.8.0-3
lib32-freetype2 2.4.3-1
lib32-gcc-libs 4.5.1-7
lib32-glibc 2.12.1-7
lib32-libdrm 2.4.21-4
lib32-libgl 7.8.2-5
lib32-libice 1.0.6-3
lib32-libsm 1.1.1-3
lib32-libx11 1.3.5-2
lib32-libxau 1.0.6-2
lib32-libxcb 1.7-2
lib32-libxcursor 1.1.10-3
lib32-libxdamage 1.1.3-3
lib32-libxdmcp 1.0.3-4
lib32-libxext 1.1.2-3
lib32-libxfixes 4.0.5-3
lib32-libxrandr 1.3.0-3
lib32-libxrender 0.9.6-4
lib32-libxt 1.0.8-3
lib32-libxxf86dga 1.1.1-3
lib32-libxxf86vm 1.1.0-3
lib32-mesa 7.8.2-5
lib32-util-linux-ng 2.18-3
lib32-zlib 1.2.5-5
libao 1.0.0-2
libarchive 2.8.4-2
libass 0.9.11-1
libassuan 2.0.1-1
libcaca 0.99.beta17-1
libcap 2.19-1
libcddb 1.3.2-2
libcdio 0.82-1
libcroco 0.6.2-1
libcups 1.4.4-3
libdaemon 0.14-1
libdatrie 0.2.4-1
libdbusmenu-qt 0.6.4-1
libdca 0.0.5-2
libdmx 1.1.0-1
libdrm 2.4.22-1
libdvbpsi 0.1.7-1
libdvdnav 4.1.3-2
libdvdread 4.1.3-2
libebml 1.0.0-1
libevent 1.4.14b-2
libexif 0.6.19-1
libfetch 2.33-1
libffi 3.0.9-1
libfontenc 1.1.0-1
libftdi 0.18-1
libgadu 1.9.1-1
libgcal 0.9.6-1
libgcrypt 1.4.6-1
libggz 0.0.14.1-1
libgl 7.9-1
libglade 2.6.4-2
libgpg-error 1.9-2
libgphoto2 2.4.9-1
libgssglue 0.1-2
libical 0.46-1
libice 1.0.7-1
libid3tag 0.15.1b-6
libidl2 0.8.14-1
libidn 1.19-1
libieee1284 0.2.11-3
libindi 0.6.2-1
libiodbc 3.52.7-4
libjpeg 8.0.2-1
libksba 1.0.8-1
libktorrent 1.0.4-1
libldap 2.4.23-1
libmad 0.15.1b-4
libmatroska 1.0.0-1
libmng 1.0.10-3
libmodplug 0.8.8.1-1
libmp4v2 1.9.1-1
libmpc 0.8.2-2
libmpcdec 1.2.6-2
libmpeg2 0.5.1-1
libmsn 4.1-2
libmtp 1.0.2-1
libmysqlclient 5.1.51-1
libnice 0.0.13-3
libnl 1.1-2
libnova 0.13.0-1
libofa 0.9.3-2
libogg 1.2.0-1
libotr 3.2.0-1
libpcap 1.1.1-1
libpciaccess 0.12.0-1
libpng 1.4.4-1
libproxy 0.4.6-2
libqalculate 0.9.7-1
libraw1394 2.0.5-1
librpcsecgss 0.19-3
librsvg 2.32.0-2
libsamplerate 0.1.7-1
libsasl 2.1.23-4
libshout 2.2.2-3
libsm 1.1.1-1
libsndfile 1.0.23-1
libspectre 0.2.6-2
libssh 0.4.6-1
libtasn1 2.6-1
libthai 0.1.14-1
libtheora 1.1.1-1
libtiff 3.9.4-1
libtirpc 0.2.1-1
libtool 2.4-1
libusb 0.1.12-4
libusb1 1.0.8-1
libva 1.0.5-2
libvdpau 0.4-1
libvisual 0.4.0-3
libvncserver 0.9.7-3
libvorbis 1.3.1-1
libvpx 0.9.2-1
libwmf 0.2.8.4-8
libx11 1.3.5-1
libx86 1.1-2
libxau 1.0.6-1
libxaw 1.0.8-1
libxcb 1.7-1
libxcomposite 0.4.2-1
libxcursor 1.1.10-1
libxdamage 1.1.3-1
libxdmcp 1.0.3-1
libxext 1.1.2-1
libxfixes 4.0.5-1
libxfont 1.4.2-2
libxft 2.1.14-1
libxi 1.3.2-1
libxinerama 1.1-1
libxkbfile 1.0.6-1
libxklavier 5.0-1
libxml2 2.7.7-2
libxmu 1.0.5-1
libxp 1.0.0-3
libxpm 3.5.8-1
libxrandr 1.3.0-1
libxrender 0.9.6-1
libxslt 1.1.26-2
libxss 1.2.0-1
libxt 1.0.8-1
libxtst 1.1.0-1
libxv 1.0.5-1
libxvmc 1.0.6-1
libxxf86dga 1.1.1-1
libxxf86vm 1.1.0-1
libzip 0.9.3-1
licenses 2.6-1
linux-api-headers 2.6.34-1
linux-firmware 20100911-1
lirc-utils 0.8.6-5
lm_sensors 3.2.0-1
logrotate 3.7.9-1
lua 5.1.4-6
lua-lzlib 0.4_work2-4
lua-yajl-git 20100308-1
luafilesystem 1.5.0-1
luasec 0.4-2
luasocket 2.0.2-3
lvm2 2.02.74-1
lzo2 2.03-1
m4 1.4.15-1
mailx 8.1.1-7
make 3.82-2
man-db 2.5.7-1
man-pages 3.29-1
mcpp 2.7.2-2
mdadm 3.1.4-1
mesa-demos 8.0.1-1
mkinitcpio 0.6.7-1
mkinitcpio-busybox 1.17.2-1
mlocate 0.23.1-2
module-init-tools 3.12-1
mozilla-common 1.4-1
mpfr 3.0.0.p4-1
mplayer 32492-2
musicbrainz 2.1.5-4
mysql 5.1.51-1
mysql-clients 5.1.51-1
nano 2.2.5-1
ncurses 5.7-3
neon 0.29.3-2
net-tools 1.60-14
nfs-utils 1.2.2-3
nfsidmap 0.23-3
nickle 2.70-1
nspr 4.8.6-1
nss 3.12.8-1
openbabel 2.2.3-1
opencore-amr 0.1.2-1
openexr 1.6.1-1
openjdk6 6.b20_1.9.1-1
openjpeg 1.3-3
openssh 5.6p1-1
openssl 1.0.0.a-3
openvpn 2.1.3-1
orbit2 2.14.19-1
orc 0.4.7-1
oss 4.2_2003-1
oxygen-icons 4.5.2-1
package-query 0.4-1
pacman 3.4.1-1
pacman-mirrorlist 20100825-1
pam 1.1.1-1
pango 1.28.3-1
patch 2.6.1-1
pciutils 3.1.7-1
pcmciautils 017-1
pcre 8.10-1
perl 5.12.1-2
perl-error 0.17016-1
perl-html-parser 3.66-1
perl-html-tagset 3.20-1
perl-libwww 5.836-1
perl-uri 1.54-1
perl-xyne-arch 2010.10.09.1-1
perl-xyne-common 2010.10.09.1-1
phonon 4.4.2-2
phonon-gstreamer 4.4.2-2
phoronix-test-suite 2.8.1-1
php 5.3.3-2
pinentry 0.8.0-2
pixman 0.18.4-1
pkg-config 0.25-2
pm-quirks 0.20100619-1
pm-utils 1.4.0-1
podofo 0.8.4-1
polkit 0.98-1
polkit-kde 0.95.1-2
polkit-qt 0.96.1-3
poppler 0.14.4-1
poppler-data 0.4.3-1
poppler-qt 0.14.4-1
popt 1.16-2
postgresql-libs 9.0.1-2
powerpill 2010.08.24.1-1
ppl 0.11-1
ppp 2.4.5-1
printproto 1.0.4-2
procps 3.2.8-1
psmisc 22.13-1
pth 2.0.7-3
pycairo 1.8.10-2
pycrypto 2.3-1
pycups 1.9.51-2
pygobject 2.26.0-2
pygtk 2.22.0-3
pyqt 4.8.0-1
pysmbc 1.0.9-1
python-dateutil 1.5-2
python-dnspython 1.8.0-2
python-imaging 1.1.7-2
python-lxml 2.2.8-2
python-mechanize 0.2.2-2
python-numpy 1.5.0-2
python-pypdf 1.12-5
python-urwid 0.9.9.1-2
python2 2.7-2
qca 2.0.2-2
qca-ossl 2.0.0-3
qimageblitz 0.0.6-1
qscintilla 2.4.5-4
qt 4.7.0-4
qwt 5.2.1-1
randrproto 1.3.1-1
raptor 1.4.21-1
rarian 0.8.1-1
rasqal 0.9.20-1
rdesktop 1.6.0-5
readline 6.1.002-1
recode 3.6-5
recordproto 1.14-1
redland 1.0.12-1
reiserfsprogs 3.6.21-2
renderproto 0.11.1-1
rp-pppoe 3.10-5
rpcbind 0.2.0-2
rrdtool 1.4.4-2
run-parts 3.4.1-1
sane 1.0.21-3
schroedinger 1.0.9-1
scrnsaverproto 1.2.0-1
sdl 1.2.14-5
sdl_image 1.2.10-2
sed 4.2.1-2
shadow 4.1.4.2-3
shared-desktop-ontologies 0.5-1
shared-mime-info 0.80-1
sip 4.11.2-1
smbclient 3.5.6-1
soprano 2.5.2-1
speex 1.2rc1-1
sqlite3 3.7.3-1
stdin-plasmoid-svn 0.2r32-1
strigi 0.7.2-3
subversion 1.6.9-6
sudo 1.7.4.p4-1
sysfsutils 2.1.0-5
syslog-ng 3.1.2-1
system-config-printer-common 1.2.5-3
sysvinit 2.88-2
taglib 1.6.3-1
talloc 2.0.1-1
tar 1.23-3
tcp_wrappers 7.6-12
tdb 1.2.1-2
telepathy-farsight 0.0.15-2
telepathy-glib 0.12.2-1
telepathy-qt4 0.3.5-1
texinfo 4.13a-4
tidyhtml 1.46-1
ttf-dejavu 2.30-2
ttf-freefont 20090104-2
ttf-ms-fonts 2.0-3
tunepimp 0.5.3-8
twisted 10.1.0-1
tzdata 2010n-1
udev 163-1
unixodbc 2.3.0-1
unrar 3.9.10-1
unzip 6.0-5
usbutils 0.90-1
util-linux-ng 2.18-3
v4l-utils 0.8.1-1
vbetool 1.1-1
vi 050325-3
videoproto 2.3.1-1
vim 7.3.3-2
vim-colorsamplerpack 8.03-2
vim-runtime 7.3.3-2
virtualbox_bin 3.2.10-2
virtuoso 6.1.2-1
vlc 1.1.4.1-2
wget 1.12-2
which 2.20-3
wicd 1.7.0-6
wine 1.3.5-1
wireless_tools 29-3
wpa_supplicant 0.7.3-1
x264 20101013-1
xbitmaps 1.1.0-1
xcb-proto 1.6-2
xcb-util 0.3.6-1
xdg-utils 1.0.2.20100618-1
xextproto 7.1.2-1
xf86-input-evdev 2.5.0-1
xf86-input-keyboard 1.4.0-3
xf86-input-mouse 1.6.0-1
xf86-input-synaptics 1.3.0-1
xf86-video-intel 2.13.0-4
xf86-video-vesa 2.3.0-3
xf86dgaproto 2.1-1
xf86vidmodeproto 2.3-1
xfsprogs 3.1.3-1
xineramaproto 1.2-1
xkeyboard-config 2.0-1
xorg-docs 1.5-1
xorg-font-utils 7.5-2
xorg-fonts-100dpi 1.0.1-3
xorg-fonts-75dpi 1.0.1-3
xorg-fonts-alias 1.0.2-1
xorg-fonts-encodings 1.0.3-1
xorg-fonts-misc 1.0.1-1
xorg-iceauth 1.0.3-1
xorg-luit 1.1.0-1
xorg-res-utils 1.0.3-3
xorg-server 1.9.0.901-2
xorg-server-common 1.9.0.901-2
xorg-server-utils 7.6-1
xorg-sessreg 1.0.6-1
xorg-twm 1.0.4-3
xorg-utils 7.6-5
xorg-xauth 1.0.4-1
xorg-xbacklight 1.1.1-1
xorg-xcmsdb 1.0.3-1
xorg-xgamma 1.0.3-1
xorg-xhost 1.0.3-1
xorg-xinit 1.2.1-1
xorg-xinput 1.5.2-1
xorg-xkb-utils 7.5-2
xorg-xmodmap 1.0.5-1
xorg-xrandr 1.3.3-1
xorg-xrdb 1.0.6-1
xorg-xrefresh 1.0.3-1
xorg-xset 1.2.0-1
xorg-xsetroot 1.0.3-1
xproto 7.0.18-1
xterm 266-1
xvidcore 1.2.2-1
xz 5.0.0-1
yajl 1.0.9-3
yaourt 0.9.5-1
zlib 1.2.5-2
zope-interface 3.5.3-2
zvbi 0.2.33-2
Last edited by DarksideEE7 (2010-10-28 16:29:14)Could it be that I don't have a swap file? Surely not....I have 4GB of memory and I've never had problems with suspend in the past.
I was able to get it to suspend while in KDE using pm-suspend while in konsole and all of the console screens were black, with the exception of tty7, which had konsole up (without any window decoration). I wasn't able to execute any commands (including shutdown), nor could I su - to root.
This happened a second time, and it mentioned that it was enable to mount sda2 (which is my route partition) Any ideas on how to fix this? I NEED suspend.
Other than that I'm getting great performance, especially with my fstab options set in place.
Last edited by DarksideEE7 (2010-10-28 23:40:08)
Maybe you are looking for
-
I was trying to move some of my iphotos to a CD. I don't know what happened, but when I try to sign out of iphoto I get a message saying "there is a burn in progress" and it will not let me shut down my computer or get out of the iphoto site.
-
Link to Content Area from ASP page brings up default page
I have a link on an ASP to the content area. When the user clicks on the link, he/she is required by the portal to provide their username/password. After entering the correct information, the users are displayed their default page NOT taken to the co
-
Stock transfer between one ware house to another warehouse
hi all, i moved the the stock within the warehouse(bin to bin).my client requirement is move the stock from one ware house to another warehouse in same plant /storage location. so i need the configuration steps for that. appreciate your hel
-
Sap pp-Procurement type u2018Xu2019
What is use of Procurement type u2018Xu2019 in MRP2 screen, & how system plans if we enter this key and how it is affected or related with MRP?
-
Hi Guys, I run FCPX on my 2.3 ghz - 8 gig ram - macbook pro retina display laptop. I mostly use hero 3 1080p footage when editing. I must say I am seriously disapointed with the laptops performance. Doing anything feels really, really, really, laggy.