Go To Local in VISA

Hi all,
I noticed the VISA library does not have Go To Local function for
GPIB. How do I this with the VISA library ?
Makoto

Makoto wrote:
> Hi all,
>
> I noticed the VISA library does not have Go To Local function for
> GPIB. How do I this with the VISA library ?
>
> Makoto
Is the function "VISA GPIB Control REN" what you want ?
It looks like it will send a go to local to a device.
(found in the interface specific palette)
If this will not work then sending the local command to
the GPIB device using VISA will work.
Kevin Kent
Attachments:
Kevin.Kent.vcf ‏1 KB

Similar Messages

Can i use a external thunderbolt harddrive to copy my imac hard drive.

how fast would a thunderbolt external hard drive be, if i were to copy my Imac hard drive as a backup or image. At the moment its taking 4 hours to copy 95gig using my USB external hard drive......Seems like forever!!!!!

http://support.apple.com/kb/HT1948?viewlocale=en_US&locale=en_US
Visit that link. It seems you should be able to but you would have to format the drive and install the operating system to it.
On the iMac, start it up and immeditely hold down Command + R. From there you can open disk utility and format it.

BoA Approval

...been a bit since I have apped for anything......did request and got a 5k CL increase on my local CU visa a few months ago I thought...."hey, what the heck..." so I apped online for a BoA cash rewards card today.......viola.........instant approval.....5k CL I'll take it. this journey back to good credit has been interesting and rewarding. Thanks to this place......I am getting educated.

Big congrats on your new BofA card! I agree, this place is awesome! Education is everything.

Renaming typedef file caused constants reset

Hello!
Here's a short description of the problem I encountered:
I renamed the filename of the typedef that was used in my state machine for state coding (see for example State Machine template shipped with LV). As result I lost values of ALL constants that coded states in my state machine, i.e. they were reset to value of the first value in state enum.
Note: when opening state machine that used the typedef
I got the message something like "VI was changed in memory. Reload from disk or view from the memory?". And 2 buttons: View and Discard. I clicked "View".
Then after restoring all constants manually, I saved my work to archive and tried to rename typedef file again, the result was the same - all constants reset to first value of enum.
I restored files from archive, again renamed typedef file,
then closed my app WITHOUT saving state machine that used typedef. After opening my program I got the message "Searching for my typedef", pressed "Browse..." and loaded typedef from renamed file. Constants were left without any change (uh-r-r-a!).
Before posting this message to forum I tried to make an example to show the problem, but o-o-ps I failed to do it.
It didn't repeat even with my program.
This post can't be considered as bug report, as I can't repeat the problem. But I think the problem exists as I lost values of all constants after renaming typedef file, and this is the fact.
So my advice (that old as the world) to everybody is to save work even when innocent actions are made such as renaming typedef file names.
Probably somebody encountered this problem and knows how to repeat it.
Thanks for attention.
Any comments appreciated.
Rashid.
Using LV 8.0 (LV Run Time Engine 8.0.1) on Win XP with Russian locale, all VIs used in my programs have names in cyrillic sometimes mixed with english letters, e.g. "russian name (typedef).ctl".

Hello, Charlie,
I can say absolutely sure that I always used LabView to rename my typedef file. I never use Windows Explorer to rename typedef files (or any other LV files) in my practice.
Besides, when the values of my constants were reset there wasn't any broken wires. The block diagram wasn't corrupted. Everything was fine except default values of my constants. Due to that I noticed this error a little later - after renaming typedef file I ran my program and couldn't understand why it fails to act as should. When debugging this problem I went down to my state machine and only then I saw that all my state constants are reset to default values.
I never used "Substitute copy for original". I used only
"Rename" when renaming my typedef file.
I didn't add any items to my typedef. The only things I did are:
- renaming my typedef enum label in the *.ctl file;
- and "Save as.." -> "Rename..." - renaming my typedef file.
Besides, when I did try renaming 2nd time to reproduce such behaviour: I left typedef enum label without change and the behaviour was the same.
So, such behaviour (loosing constant values) I get TWO times.
But after I worked around this (see 1st post) I couldn't already reproduce this behaviour.
If I'll succeed in this one more time again, and be able to reproduce this behaviour, I'll certainly post to you my steps.
Thanks for attention.
Rashid.
P.S.
1. As to broken wires if I get it right - in your case you added new items to typedef but your case structure in state machine was not updated to contain new states handlers. If so, then it's obvious why you got broken wires. But as I didn't change the typedef itself (only renamed it), I didn't get broken wires.
2. I wouldn't be surprised if I'd have done something in the weird way: I mean renaming by Explorer or saving, closing and so on. I was doing everything from the LabView environment. As far as I remember I didn't rename the state machine vi file at that, only typedef file. And my state machine was always opened. The only file I was opening/renaming/closing was typedef file. And as far as I remember I opened it by "File -> Open..." and not right-clicking at constant and "Open TypeDef..".
3. I understand that my description is foggy :-) and that it's difficult to find this weird set of steps, but who knows. Anyway I appreciate your help.Message Edited by Rashid on 06-13-2006 12:03 PM

Been in the garden...want some LUV!!!

Well, I have been in the garden with regards to credit card apps/CLIs since October of last year and thought it was time to see if I could get some LUV from my two main cards. A local Credit Union Visa Platinum and my Barclay Rewards Mastercard. For local CU Visa Platinum went from a 5K limit to 10K limit. Was happy about that.Barclay rewards mastercard went from $2750 to 4K limit (asked for 5K). Given that I just got an auto CLI from Barclays in January, I wasn't planning on it. Asked for LUV and got the ten day notice... called the RECON line and was asked some questions (mostly about my Ch. 7 BK back in 2013). So, all in all, can't say I am dissapointed with these results. So now, between Target and Amazon and these two cards, I have over 20K of credit - not too bad for less than two years post BK discharge. Just wanted to share the news!!!

OP: That is wonderful news. Thanks for sharing! Congrats to you and much luck with your credit rebuilding endeavors!

Update payment info

I am unable to update payment info. I am now living in South Korea and will be using a local bank Visa card. I would like to continue using CC in "English." I believe my monthly payment is now late. Also I am unable to launch PS CC, I get this message - Could not initialize Photoshop the internal file signature is incorrect..... Please help.

Knl78clarinet to verify payment please contact our support team. For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6. Our chat representatives can provide a personalized experience to resolve the issue you have described.
Once your payment has been verified I would then recommend posting regarding the difficulty you are facing with Photoshop in the Photoshop General Discussion forum at http://forums.adobe.com/community/photoshop.

MAX RT Target Update Error nipal.err file not found

when trying to run a test on the daq assistant, receive error stsing that drivers don't match on RT target and host. When try to reinstall NI-DAQmx 7.2.0 get error file not found ...\NI-PAL\1.8.2.3.0\nipal.err. I checked, the file is not there.

Hello,
I don't understand if you get this when trying to reinstall DAQmx on your computer or in the RT box.
I am trying to download the software to the RT target from the host (MAX Real Time Software Install Wizard).
you might want to try uninstalling all the software and then reinstalling it. If it is reinstalling in your computer, I would first try to uninstall the driver and then reinstall it. If that doesn't fix it, you can try upgrading NI-VISA and that should install the latest version of the driver you are missing. Then install DAQmx
I tried to uninstall and reinstall DAQmx on the RT target but receive the nipal.err file not found error (the file it is looking for should be on the host). I tried to reinstall VISA on the RT Target and also receive a file not found error: error reading from local disk visa-eng.err.
So no luck as of yet with the DAQmx
Tom

Unlimited uploads to Revel within 30 days

I was influenced to purchase the Adobe Photoshop Elements 12 & Adobe Premiere Elements 12 package with the offer of unlimited uploads to Revel in the first 30 days as per the footnote on your buying guide site, see below a copy and paste of this footnote.
How do I invoke this because when I started it seems as if I am limited to 2 GB?

Hi Peter,
Thanks for the response and the complimentary Premium subscription.
Apologies for the delay in responding.
Follow the “Buying Guide” button at the following url or the *footnote on this page:
http://www.adobe.com/products/photoshop-premiere-elements/features.html
Copy & Pasted for your convenience
Internet connection required. This product may integrate with or allow access to certain Adobe or third-party hosted online services (“Online Services”). Online Services are available only to users 13 and older and require agreement to additional terms of use and Adobe’s online privacy policy. Online Services are not available in all countries or languages, may require user registration, and may be discontinued or modified in whole or in part without notice. Additional fees or subscription charges may apply. With Adobe Revel™, not all Elements file formats are supported. During the first 30 days, users are granted unlimited uploads. After that, they will be able to upload up to 50 photos or videos each month for free. Exceeding that limit requires the purchase of a paid subscription, priced at US$5.99 per month or US$59.99 per year. For local pricing, visit your local Apple iTunes app store. For more details on pricing plans, visit http://www.adoberevel.com/plans.
Kind Regards, George

Connecting AX and ethernet wire to cable modem (and ARD).

Hi all,
This has to be easy, but after 10 minutes of searching, I can't readily find the answer.
I have a cable modem (with one port) which works with my Macbook just fine. I plugged in an Airport Express (and used wireless only) and it works fine also, EXCEPT:
When using Apple Remote Desktop (the latest version) to control the Macs at my office, the status of all remote Macs is: Screen Sharing. When I connect to a remote system, I can see and control that Mac, but I can't copy anything either way (from remote to local or visa-versa).
When connected to the cable modem with an ethernet cable, everything works fine.
SO, I would like to connect maybe a 3 port hub to the cable modem and use both the ethernet cable and the AX (for other computers & iPhone) at the same time. Will this work? Can someone suggest a good hub/switch for this if it does?
Secondly, is there a way to use ARD on a wireless computer? It would be nice to go to a hot-spot and control my remote Macs.
Thanks.
mike p.

SO, I would like to connect maybe a 3 port hub to the cable modem and use both the ethernet cable and the AX (for other computers & iPhone) at the same time. Will this work?
No. You need a router not an Ethernet hub (or switch). The AX can't do the job because it only has a single Ethernet port.
Secondly, is there a way to use ARD on a wireless computer?
Sure. It works just like any other computer behind a router. You must configure the computer to be at a fixed IP address and then forward/map the appropriate ports through the router to the computer.

Router not reachable

Our environment is connected with 2 MPLS and been communicated with one remote locations . The issue whenever one of our MPLS is down , another link in our location also not able to reach from our local site vis core switch . But some how the remote site is able to ping our first Router and not second Router . As per Vendor report, BGP is showing up for past 5 week in our first Router, so there isn't any issue.
Kindly clarifiy me why iam not able to reach both the router . once any one of the link was down.
Thanks
Yuvaraj

Hi
Any help on this issue ?

I am using iphone 4 and planning to visit india for few months. can i buy local sim card from india and use in my iphone? i have alrady unlock my iphone.

I am using iphone 4 and planning to visit india for few months. can i buy local sim card from india and use in my iphone? i have alrady unlock my iphone.

Of course

Local Variable or Write VISA Icon?

Suppose that you have a control in front panel to set amplitude of generator. If you do a loop in which you desire to increse every loop the amplitude it's better use a local variable of control in front panel or Icon WRITE of VISA to do this? What is the better solution?
Message Edited by Michelle1892773 on 02-23-2010 04:47 PM
Solved!
Go to Solution.

Writing to the local variable in your code will do absolutely nothing in setting the instrument.

I was using my old iPhone 4 as an iPod for 4 months when one day I got this error message saying "phone is deactivated visit your local to reactive" ... what the heck??? now the freakin thing won't even charge!!!

I was using my old iPhone 4 as an iPod for 4 months when one day I got this error message saying "phone is deactivated visit your local to reactive" ... what the heck??? now the freakin thing won't even charge!!!

Nope. I've already turned off cellular data. It happens regardless, as soon as it is done powering on.
I suspect it might just be built into the phone's firmware to do that... and I have to hit "ignore" whenever it happens, but I just wanted confirmation of that...

Web published VIs running locally

I've seem web sites that have embedded VIs that seem to run on the client rather than the server (an example at CNX). I've used the web publishing tool to embed VIs but I can't seem to figure out how to achieve the client-side effect. Does anyone know?
Thanks, Chris

Ahhh, so you want to do what Connexions has done... here's what it looks like:
They've basically built a LabVIEW exe and linked it on the web. To run a LabVIEW-built exe in general, you need the LabVIEW Runtime Engine, which they seem to be calling Connexions LabVIEW Browser Plug-in in the document I linked above. The ini file they have you sticking in your My Documents\LabVIEW Data folder turns on the "run locally" feature so it runs on the client side. The rest basically comes down to the following HTML source on the (you should be able to view this from your browser as well):
<div class="para" id="element-509">
    <div class="media labview example">
<object classid="CLSID:A40B0AD4-B50E-4E58-8A1D-8544233807AD" codebase="ftp://ftp.ni.com/pub/devzone/tut/cnx_lv8_runtime.exe" width="840" height="540"><param name="SRC" value="DFD_Utility.llb">
<param name="LVFPPVINAME" value="DEP Tree Main.vi">
<param name="REQCTRL" value="false">
<param name="RUNLOCALLY" value="true">
<embed src="DFD_Utility.llb" reqctrl="true" runlocally="true" type="application/x-labviewrpvi80" pluginspage="
        http://digital.ni.com/express.nsf/bycode/exwgjq
    " lvfppviname="DEP Tree Main.vi" width="840" height="540"></embed></object><p>Download <a class="cnxn" href="DFD_Utility.llb">LabVIEW Source</a></p>
</div>
</div>
I hope this helps!
Best Regards,
JLS
Best,
JLS
Sixclear

HT4576 I want to set up appointment times for an overseas trip before I go, and see those local times in the places I visit, but also be able to set new appointments while I am traveling, in the local times. Can I do this with Time Zone Support? If not,

I want to set up appointment times for an overseas trip on my iPhone 4S before I go, and have them appear as I put them in (for the local time) when visiting other countries. I also want to be able to adjust times and set up new appointments when I am overseas for the local time. Can I do this using the Time Zone Support or any other way?
Basically I want to do what I can do with a piece of paper - write down the time for when I will be there, and have it viewable when I am there, but also be able to put down new times while there.

Hi.
Regarding your question about reverting back- yes, I think you can. If you make a backup of your current configuration in Server Admin (by dragging the configuration file to your desktop- cool, no?) then you can load that one back in should your configuration not work. If you have the manual from Apple it should describe this process.
Network speed post-op? I don't think you will need to worry. Even using home directories stored on our OS X Server there is no network slowdown (that you can notice or that impacts the wider LAN in any case). It shouldn't slow down access to files, applications (which still come from the local drive anyway) or individual internet connections (even with filtering).
In our experience some of these things have actually got faster- but a lot of that is user perception. Same goes for people who will know you have configured the server and that they are now accessing files through your network from the server, and who really think it is slower. File coming from your local hard drive will always be quicker- but network access isn't that bad that it will make you barf and run in the opposite direction.
Something to look at: connection speed between clients and switching technology in your office. In other words, what kinds of switches are you using, what line speed have you got (100MB/s?) and is the connection from your server to the switch gigabit? Make sure it is.
Enjoy
Paul
MacBook Pro 2.16GHz Mac OS X (10.4.8)

Go To Local in VISA

Similar Messages

Maybe you are looking for