Goods Issue To Each Operation Of Production Order?

As we know, in SAP ,when we create and realse the production order,we could posts good issue to the production order ,using MB1A. And in SAP , the components can be assigned to the operations of the finished product.
But in our company, the production order will take long time,and during production,different materials will be used in different phase of the production order,that means different components will be used for different operations.
And for some reason,we don't want our material to be backflushed during production.
So I want to ask can we post goods issue to each operation of the production order,not to the whole production order? Can SAP support Post Goods Issue To Each Operation Of Production Order?
What shall we do if we want do this?By ABAP development ? Or there is third party software
can do this with SAP?
Thanks for any reply!
Edited by: Fei Liu on Mar 14, 2009 4:56 PM

Hi Fei,
As explained above, i think the concept of releasing the individual operations instead of releasing the order at header level would work fine for your requirement.
Steps:
1. Go to operation page in co02.
2. Select the first operation, at the bottom of the screen you would find a Green Flag, click on the same.
3. You will now find that the status of the first operation has changed to REL, while the others are still not.
4. At header level you will find a status PREL, indicating partial release.
5. After completion of the first operation, confirm the same & select the second operation & click release, & the process follows in this manner
6. Please do not click the green flag at the header level as this will release the entire order.
Pre-requisite:
1. You have assigned components to the respective operations.
You might also want to consider the usage of trigger points. This you can assign to each operation, where-in if the status changes to CNF, you trigger the release of the following operation. But before opting for this flow, first do it manually to ensure it meets your need.
Also if the components assigned to the same operation, needs to be issued at different date, then you can use the lead time offset in BOM. In cs02, go to item details, here you can specify the same. Eg: If your operation stats on 15th March & you want this component to be issue only on 17th March, then specify the offset as 2. But if you want the components to be issued 2 days in advance of 15th march, then specify as 2-.
Hope the above helps.
Regards,
Vivek

Similar Messages

RE: Goods issue posting through Migo for Production Order

I have released the production order, when I want to post the goods issue through migo to the concerned order I am getting error saying that material "No components exist but there was stock in the storage location for unresticted use.
I have checked through MMbe transaction.

Are there components in the Production Order? If yes, is the reservation created and movement allowed for the reservation?
Lakshman

Goods Issue Control & confirmation control for Production Order.

Dear ALL,
Please let me know how to control,
1) Unauthorised consumption of component quantities in excess of quantity defined in BOM?
2) Posting of Confirmation (At operation Level) against production order for which no components have been issue?
3) Posting of goods receipt against production order for which no components have been issued or no confirmations have been posted?
4) Posting of goods reversal quantity in excess to issued quantity.
Regards,

Prashant,
Not all the requirements you mentioned can be controlled in Standard SAP system. For some of the requirements you could configure User status (Tcode :BS02).
exmaple :
Posting of Confirmation (At operation Level) against production order for which no components have been issue?
SET user status XX on Business transaction : Release that forbids CONF.
SET another user status YY on Business transaction : Goods movement that allows confirmation.
With this kind of tricky user status you can control/prevent some transactions in production order till certain transactions are done.
I know this is not the ideal solution but I have used it for various purposes to meet certain business needs.
Hope this helps you.
Thanks,
Ram

Barcode for each operation of production order

Hi, We want to use barcode for each operation of the manufacturing order so that by scanning it, it will display the data related with order automatically on screen. pls guide how to implement the same

it is done by myself.

Restricting Goods Issue only against reservation and Production Oder

HI all,
Is it possible to restrict goods issue only against Reservation, and Production Order.
I dont want the user to issue goods without refering to any reservation or Production Order.
Thanks and Regads

Hi,
To restrict the same in MIGO, go to following path;
SPRO > MM > Inventory Management and Physical Inventory > Settings for Enjoy Transactions > Settings for Goods Movements (MIGO) > Settings for Transactions and Reference Documents and Here Select Transaction "MIGO" and double click on "Transaction/event", here select "A07 Goods Issue" and double click on "Reference document" and remove only keep Active "Order" and "Reservation" and remove remaining. And then check in MIGO.

Issue regarding Batch determination in Production order as per Expiry date.

Dear all,
first of all happy Navratri.
I have issue regarding batch determination in production order.
I have to compare P.O header materialu2019s expiry date and issuing components expiry date at the time of batch determination.
lets take example, Material having self life is u201CXu201D years and batch determination against PO is based on FEFO with the help of self life we can determine Expiry date of manufacturing material suppose it is u201CYu201D I have to introduce restriction at the time of good issue if expiry date of issuing components u201CZu201D is less than expiry date u201CYu201D.
Please give your valuable suggestions either standard or through SAP enhancements.
thanks & Regards
SIVA

Dear
Thanks for your reply, i am layman about batch derivation can u elaborate it.
Thanks & Regard

Regarding Costing in External processing operation in production Order

Hi Everybody,
We are trying to do sub contracting through external processing operation in production order. In brief, we are creating a production order which contains just one operation and when the prod.order gets released, it creates a purchase req through external processing operation. Pur.Req is being converted to Pur.Order with all the Raw's which we are going to send to Sub Contractor..
The costing issues we are facing are
1. First we receive GR against Pur.Order, once its done, the Raw's which we sent to Sub.Contractor will be backflushed.. but we dont receive the Finihsed part until we confirm the production order.... there is a Gap between this two processes.. so how can we make sure that there wont be any differences in terms of FI..
2. Second issue is, some times even if we ordered 10 pcs, subcontractor can only send 5pcs and 5 pcs afterwards.. but every month end FI dept tries to close the books, so how can we deal with this issue if i receive 5 pcs in this month and remaining 5 in the next month...
If any body dealth with this kind of situation.. your hints will be really valuable,
Adavnce thanks
srikanth

Dear Srikanth,
Please note the following:
1. First we receive GR against Pur.Order, once its done, the Raw's which we sent to Sub.Contractor will be backflushed.. but we dont receive the Finihsed part until we confirm the production order.... there is a Gap between this two processes.. so how can we make sure that there wont be any differences in terms of FI..
- a) Issue your raw materials through T.Code. - MB1B, Mvt. Type - 541. This will transfer materials from your stock to vendor stock (provided you have initiated vendor material provision and activated 541 mvt. type for PP)
b) After you receive the material back from vendor, run the T.Code MB01, which will cause Mvt. Types 543 and 101. Now the material has come back to your Production order, but not in Storage location stock.
c) Then carry on normal CO11N and MB31 for your production order.
Hope this will solve your problem.
Revert back if you still have any question.
Regards,
Angshuman Kar

To issue the component to the Production Order

Hello All,
I have assigned the component to the Operation of Production Order from Different plant(say 1100) of Same company code(1000).
I want to issue that material from that plant to this plant (say 1000) of Production Order.
So my question is the correct method of directly issuing the component to this Production Order of different plant.
Shailendra

Hi HAdkar
The correct procedure is .
You have to assign special procurement key 80 in material master for which you want to procure from plant 1100. The material master of procuring material should exist for the plant 1100. While running MPR the procurement proposal will be automatically created in the 1100 plant. From 1100 plant you do stock transfer to your storage location. Then finally do GI for the header prod order in you plant.
This is the procure in SAP. Eventhough both the plants exist in the same compound.
Regards
J . Saravan

Operation on production order - what is the object (BOR) to manage it ?

Hello,
I have to call a workflow when an operation on production order is confirmed, or partially confirmed, or deleted.
What is the business object to use to manage it ??
Tks,
Roberto.

Hello Uma,
yes, right...
yesterday, I was not able to see the trace when I deleting a production order becuase the object BUS2005 was not
active on customizing:
after I found it
No business object triggered for production order creation
end now is showed...
SO, we have to use BSVW ... and so the consequences is : How to know what is the object BOR to activate !??!?!
tks

Issuing a handling unit to production order

Hi
Is it possible to issue a handling unit to production order. Kindly through some tips in this regard.
Thanks and Regards
Saravana Kumar

hi Sarvana,
a handling unit consists of altogether several contents items that are listed as
>full delivery items,
>partial delivery items,
>or even further handling units
So from the above the handling unit consist of the items for delivery and are packed in one packaging
material (box). The packaging material and the materials it contains form a handling unit that is
assigned to a delivery and can be moved within the warehouse. The content of the handling unit is not significant for Warehouse Management. In fact, the contents can only be determined by referring to the delivery.
So a HU can't be assigned to the production order within the same plant.
for further assistance you can check the following link.
http://help.sap.com/saphelp_47x200/helpdata/en/16/4bad1ba63611d2b44e006094b9b9dd/frameset.htm.
hope this helps to answer your question,
with regards,

Issue with printing newly added operations in Production Order through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi,
1) Go to Tcode "OPK8"
2)Select LG02 "Op Control Ticket"
3) Double click on :List Control for Transactions" in the left hand menu tree
4) In front of ur desired t code "co02" make the changes ( Number of prints- u can increase) 6th column.
Try this.

Consumption acct of materia which issue to maint. ord. and production order

Hi all,
I have one problem with the cost report for maintenance orders.
I have one material code, such as we call A.
Mat. A is issued to production order and also maintenance order.
For production order, consumption account is 123
For maintenance order, consumption account is 456
I have defined new movement type for issuing to Maintenance order is ZB1
in OBYC:
      GBB - VRB --> 123
      ZB1 --> 456
So for accounting purpose, I can slit these consumption accounts
However, when I go to maintenance order cost reports, systems slit these cost into 2 line
Material A        Acct. Cons 123        Plan cost 100        Actual cost 0
Material   A        Acct. Cons 456       Plan cost 0            Actual cost 120
How can I group into 1 line ?
Edited by: Emily Nguyen on Jun 2, 2009 12:15 PM

Hi Emily
In OBYC you can configure GL accounts per valuation class.
You cannot configure Movement type wise. Each General modifier is linked with movement types.
We cannot give two consumption accounts for one valuation class in VBR.
Run your plan cost again.
Thanks
Kiran A

Issue more than Planned in Production Order

Hi All,
I have a problem with 2007B SP00 PL11 for Issue for Production.
In 2005B, I can issue the BOM Components more than planned. But in 2007B version, I am unable to issue more than planned. When I right-click at Production Order to Issue Component or at Issue for Production and copy from Production order. no items are displayed.
I have already issued in full at the 1st issue. Then subsequently, i need to issue some more qty for certain components. But i am unable to do that.
Has this feature of issue more been changed in 2007B?
What other method can be adopted without changing the planned qty?
Please advise.
Regards
Jessie

Hi guys,
Thanks for the fast response.
Duplicate the previous issue to create the over-issue is not a good solution. It is very troublesome. itis not a good procedure to ask customers to do this step.
Changing of the planned qty will mean that i am not able to trace my initial plan and have to go back to the BOM. again, this is not logical. especially when the queries are using figures directly from production order tables.
Since it can be done in 2005 version, why is SAP taking it out this feature in 2007?

Goods Issue for GR qty to Production

Hi
While doing goods receipt for a Standard Purchase order (no a/c assignment), we receive goods into stock. But, if there is open Production order (material is due for goods issue to production order) or open Sales order (but delivery yet to be created), then GR stock qty should comedown this extent as a goods issue to direct production / Sales and Balance qty should come into Stock.
Is this possible is in standard SAP with Inventory Management transactions? Please let me know your suggestions on this scenario.
Best Regards,
Suresh

Please see the documentation below by SAP
Manual and Automatic Reservations
The R/3 System supports manual and automatic reservations. Manual reservations are entered directly by the user. Automatic reservations are generated automatically by the R/3 System. There are two types of automatic reservations:
Reservations for orders, networks, WBS elements:
When an order, a network, or a project is created, the components from the warehouse are reserved automatically.
Stock transfer reservations:
If reorder point planning is used at storage location level and the available stock on hand falls below the reorder point, the system generates a stock transfer reservation in the plant for the replenishment quantity.
<b>You cannot manually process automatic reservations. For example, it is not possible to change reservations for an order directly. You have to change the components in the order. The system then updates the reservation automatically</b>.
<b>What are the Results of a Reservation?</b>
When a reservation is entered, the following events occur in the system:
The system creates a reservation document, which serves as proof of the request.
In the material master record, total stock and unrestricted-use stock of the material remain unchanged. Reserved stock is increased by the reserved quantity.
In MRP, available stock is reduced by the reserved quantity. This is visible in the current stock/requirements list. The reservation causes an entry to be made in the requirements planning file.

Confirmation for Split operation in Production order

Hi Experts,
I have one production order say order no. is "100000000000" and its order qty is 100pcs and in operation no. "20", i have splitted the operation into two individual capacities and allocated 50pcs to each individual capacity. Now can any one explain me or tell me the steps required for confirming the operation quantity by individual capcity.
Regards,
Satya.

Hi,
Thanks for your response on my post.
As you mentioned I am using T-code CO11N for Production confirmation, but in this screen if I select operation no. 20, by default, system is read work center from production order "operation overview" screen. Now I want to capture the confirmation quantity against "induvidual capacity" and want to see some reports based on "induvidual capacity" level of the same work center.
Could you pl. advise on this.
Regards,
Satya.

Goods Issue To Each Operation Of Production Order?

Similar Messages

Maybe you are looking for