Goods Receipt in PO AND Message Flow Update in Inb. Delivery using WMMBXY

Dear All
This question is related to a previous one posted in:
Post Goods Receipt for Inbound Delivery using WHSCON IDoc
We have a stock transport order (PO) for which we create an inbound delivery. The despatch advice (EANCOM D96A DESADV) is sent to our logistics partner who returns the same EDI message with the received quantities (goods receipt).
Using the inbound IDoc WMMBID02.WMMBXY I have successfully posted the goods receipt for the original PO. However, the message flow in the delivery is not updated. When we post the goods receipt (transaction MIGO) in dialog for the delivery we see the GR in the message flow.
I have used the following values with the segments of WMMBID02.WMMBXY (SAP release = 4.6c):
E1MBXYH:
Reference = <number of delivery>
Transaction code = 'MIGO'
E1MBXYI:
Movement type = '101'
Purchasing doc. = <number of PO>
Item = <Item no. in PO>
Movement ind. = 'B'
I am not sure about the correct movement indicator but failed when using a value different from 'B':
The movement indicator is derived from the transaction code.
Permitted values:
'' Goods movement w/o reference
'B' Goods movement for purchase order
'F' Goods movement for production order
'L' Goods movement for delivery note
'K' Goods movement for kanban requirement (WM - internal only)
'O' Subsequent adjustment of "material-provided" consumption
'W' Subsequent adjustment of proportion/product unit material
QUESTION: Does anybody know if and how inbound WMMBID02.WMMBXY can be used for both the goods receipt in the purchase order AND the message flow in the inbound delivery?
Regards
   Uwe

Hello Everybody
My initial mapping of the WMMBXY IDoc proved to be correct.
For more details please refer to:
[Note 833603 - EDI: Goods receipt for stock transport order|https://service.sap.com/sap/support/notes/833603]
Regards
  Uwe

Similar Messages

  • Good receipt in MB01 and MIGO - differences

    Dear experts,
    Please anybody explain what is differences between creating good receipt in MIGO and MB01 since when creating in MB01 there was an error message : "Account determination for entry XXXX FR4 not possible" but through MIRO the posting is weel done?
    Thank you in advance.

    Hi
    In case of MB01 you can able to do only goods receipt for Single Purchase order and item known.
    E.g. PO no 100 item 10
    In case of MIGO you have multiple option
    1. Goods Receipt against Known Multiple Purchase order and items.
    E..g. PO no 100 item 10
            PO no 200 item 20 etc.
    2. Yan have option in MIGO itselft for Return Delivery.
    3. Cancellation of Goods Receipt document
    4. Display GRN Documents
    5. Release GR Block Stock etc.
    If the above answer is helpful kindly assign points
    Thanks & Regards
    Mahesh

  • Ive lost all contacts and messages after updating to ios5 ??? Help

    Ive lost all my Contacts and messages after updating to ios5 ??? Help
    How can I get them all Back ???

    Have had the same issue - and conflicts between PC, Ipad and Iphone.  Gained 6000 names and lost contacts or contact contents.  Have had to edit on PC.  Spoke with Apple Express and was advised to do editing only on PC and then sync.  Was also told not to use Icloud until problems had been solved.  Have spent last two weeks recreating my contacts list.
    Haven't yet bothered to reclaim my missing paid ring tones.

  • Cannot post Goods receipt in MIGO Error message"Field Business Area requird

    Hai
    I am posting Goods Receipt ( MIGO) with Reference to Purchase Order its having 47 Line item material. When i will doing Goods Receipt with rreference to po number its triggered error message in :Message No F5808 Field business Area is a Required  field for G/L account 1180 300000 . for only particular line item 47 material shown error..
    i checked all the settings in MM Automatic determination And G/L element, field variants, posting keys.. but everything configured profer settings..why particulat materail it shown error? how to resolve this error?

    Hi Thiru,
    A somewhat late aswer, but it might be helpfull for other users with the same problem. You can solve this problem by assigning the division/valuation area to the business area. Follow the path below to execute this:
    SPRO - enterprise controlling - Consolidation - Integration: preparation for consolidation - Preparation in the sender system - Further settings for Business Area Consolidation - Materials Management - Assign Division/Valuation Area to Business area.
    Under Enterprise structure -  Assignment - Logistics General, you will find a similar function. First execute option 1 or 2 here and then execute option 3. This makes it work as well, exept that it will not be recorded in a proper transport. The first option I gave for assigning is properly transportable.
    Greetings,
    Sjaak van den Berg
    Magnus Technology Consultants
    Edited by: S. van den Berg on Aug 14, 2009 1:09 PM
    Edited by: S. van den Berg on Aug 14, 2009 1:10 PM

  • Goods receipts blocked stock and quality inspection

    Hi,
    we want to create an inspection lot for an initial sample automatically as the goods receipts is posted. At the same time we don't want the amount to appear in the normal quality inspection stock or in the normal blocked stock but instead it should be posted in the goods receipt blocked stock.
    Is it possible to post it automatically to the goods receipts blocked stock?
    Is it possible to create an inspection lot automatically for this?
    Thanks,
    Marcus.

    This isn't something that is straight forward, like just running a report.
    You have to look at the field QALS-LMENGEZUB which is the quantity to be posted of he inspection lot.  Keeping in mind that you can have multiple inspection lots for the same batch, you'd have to get all qals records for the batch you are interested in.
    You then have to compare all the related MCHB records for the material and ln that table sum all the values in field CINSM.
    That should show you any inconsistencies between the MM and QM.
    I am assuming this is for batch managed, non-HU managed materials.
    If not, let me know and we'll take another crack at it.
    FF

  • DTW Good Receipt Doc. date and Posting Date

    Dear Professional,
    I have tried to use the DTW Good Receipt Template (oInventoryGenEntry) to unpload the initial open on-hand inventory into B1.
    However, no matter the DocDate (Posting Date) and TaxDate (Doc. Date) I have entered into the Document Template, the system still set "Today" as both Posting Date and Doc. Date after completed uploading the inventory on-hand, is there anything can help to solve or something I missed ??
    Thank,
    Deckard

    Dear Deckard,
    When I did the this DTW, I found the same issue.  B1 probably not allow to import back dated Good Receipt transactions by DTW.
    Thanks,
    Gordon

  • MIGO Goods Receipt - error with Movement Types on GR from Inbound Delivery

    Hi,
    I am getting an error message when processing a Goods Receipt (MIGO) against an Inbound Delivery with as 2 lines with different movement types, a standard 101 and a 970 (the latter being a user defined movement type for free goods).
    The error message I get is 'Movement type 970 is not allowed; only 101 is allowed
    Message no. BORGR622'
    This error message only occurs with a Goods Receipt against an Inbound Delivery, we are able to process a similar Goods Receipt using MIGO against a Purchase Order, with two different movement types 101 and 970, without any issues. 
    It is only a problem with a GR against an Inbound Delivery which is necessary in our MM solution.
    As anybody and ideas how to resolve this?  I cannot see anything obvious in config, and have not spotted any SAP OSS notes either.
    I should mention that we can process a single line Inbound Delivery and Goods Receipt for the Movement Type 970 also!

    Thanks for the reply.  The Price Control Indicator is 'S'.
    The solution was set up at my company before I joined, but the different movement type is to enable the free goods stock to make a Finance posting to a Bonus Stock GL Account.  Bonus stock sale update the same account.
    As I mention the '970' movement type worked fine with Goods Receipt against a Purchase Order (it was coded into to the user exit). 
    The MM procedures were changed to use the Inbound Delivery matched to the PO, this had a result that when the Goods receipt was posted in MIGO it posted as 101 movement, as the PO number was not being recognised.
    By making a further change to the user exit we able to suggest the '970' movement type, but now get the BORGR622 error I refer to.
    '511' is not possible against an inbound delivery either.

  • Goods receipt performed twice and stock got doubled

    Please provide suggestions on this scenario,
    We receive goods from production through PI sheet and where it did posted material document through process messages. during that time or little later someone did GR again manually from MIGO, for some reason even though production order is fully delivered earlier it allowed for some weird reason.
    now i can see two material documents for two G/Rs. I can not cancel first document since it came from MES system. when I am trying to cancel second document it is throwing an error since it is linked to WM where it created temporary storage bins and then moves stock to other storage types and temporary bins gets deletes.
    hoe to reverse stock or how to get rid of second G/R...any idea.

    not really.
    it is not possible to create a dynamic bin with LS01N
    and to create a bin with table maintenance transactions like SM30 or SE16 is usually not allowed in a production environment and it is not really easy (I did it once) as you have to care about all kind of fields that you usually do not see in LS01N
    So there is no real workaround, allow negative stock, do you correction and  the then change it again to not allow negative stock.
    (In't it strange that your warehouse guys could move a not existing receipt from interim bin to destination bin, and they even confirmed that, otherwise the quant would not have been deleted in the interim bin)

  • Goods Receipt PO+VOlume and Weight Calculation

    Hello experts
    i have a GRPO with 10 items in lines. as far as i can see, there are missing in some of the the value for the Weight and the Volume. while checking the Item Master Data form, the volume and the weight are filled up with specific value.
    could you please inform me the reason this document(GRPO)  has not filled these values for specific items?
    also, by clicking the Vlolume and Weight calculation, for these items the the volume is filled and the weight is not.
    it is strange i suppose.
    what i have found out is that in a Purchase Order, some of the items do not have a Volume or/and Weight because the BP does not have the values noticed to us and these fields are editing in item master data afterwards
    By using the System information under the VIew, i can see that the VOlume and Weight Calculation gets data from INV1 table
    Edited by: Fasolis Vasilios on Jan 10, 2012 10:56 AM

    Hi,
    The reason is simple: those value can not be copied if the Item Master was ready when you created the PO. However, PO wont automatically updated when you updated Item master. It stays in the old Item setting. That would be copied to GRPO from the old PO.
    Thanks,
    Gordon

  • Goods receipt in IM and WM in terms of Pallets

    Hi All,
    Do we have a transation or table in SAP, from where we can retrieve the numbe of Pallets received in IM (with handling unit management) and WM (with and without Storage unit management)?-
    The GR may be with and without inbound delivery.
    Regards,

    Hi,
    T-code HUMAT or HUMO will be helpful for your case.
    Good luck
    Tao

  • I am unable to sign in to icloud, verification code not sent to my email and message saying my account is being used elsewhere

    Please help. thank you all

    You have to sign out in System Preferences>iCloud and then sign back in with the new ID.

  • Batch not updating while creating delivery using bapi

    Hi
    I have used following bapi to create delivery BAPI_DELIVERYPROCESSING_EXEC and passed the following parameters into bapi
    lt_request-document_type = 'A'.
            lt_request-document_numb = deltab-vbeln.
            lt_request-document_item = deltab-posnr.
            lt_request-batch        = deltab-charg.
            lt_request-material = deltab-matnr.
            lt_request-plant = '3200'.
            lt_request-quantity_base__uom = deltab-kwmeng.
            lt_request-delivery_date = sy-datum.
    CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
    EXPORTING
    DELIVERY_EXTEND =
    TECHN_CONTROL =
          TABLES
          request = lt_request
          createditems = lt_createditems
          return = lt_return.
    here i am able to create delivery successfully but the batch which i passed in bapi is not getting updated in vl02n to do PGI.
    again i need to go to vl02n and give batch and quanitty manually to do PGI.is there anyway that batch gets updated in vl02n also.
    Regards,
    Venkat.

    Hi
    My answer is pure assumption.
    Please check the following OSS notes
    Note 758810 - BAPI_PO_CHANGE vendor batch and batch not visible
    Note 1230268 - Field Vendor Batch never filled for PO BAPIs
    Please take help from BASIS and SAP, before implementing the OSS note
    Regards
    Madhan D

  • Post Goods Receipt for Inbound Delivery using WHSCON IDoc

    Dear All
    Currently I am working on a big project dealing with EDI connections to our logistics partner for the Export business. The entire message flow between Lindt and our partner should be via EDI. Our SAP release is (still) 4.6c.
    We will create two kinds of despatch advice messages, one for inbound deliveries and one for outbound deliveries for customers.
    I would appreciate your support in the following problem that I am facing with the inbound delivery scenario:
    We create stock transport orders (purchase orders, POs) for the goods intended to be delivered into the plant at our partner
    We create a delivery (type NL = replenishment delivery) for this POs
    As soon as we post the goods issue we send the despatch advice (as EANCOM D96A DESADV message) to our partner.
    At this point the delivery is basically completed, i.e. packing status (PS) and goods movement status (GM / GS) are equal to 'C' (= completed).
    Our logistics partner uses the same EDI message to send us the goods receipts data, e.g.:
    We dispatched 50 units of a product => QTY:50:12
    The partner received indeed 50 units => QVR:50:66
    Please note that we do not use the QVR segment for the quantity difference (between despatched and received quantity) but it contains the received units. This way we avoid negative values in the QVR segment.
    When the logistics partner sends back the DESADV message containing the received quantities (QVR segment) we want to make
    the goods receipts for the products in the original stock transport order and
    upate the message flow in the delivery
    My idea was to transform the incoming DESADV message into a WHSCON.DELVRY03 IDoc based on the documentation in: [Delivery Interface|http://help.sap.com/saphelp_crm40/helpdata/en/e2/654b15a9f411d184ec0000e81ddea0/content.htm]
    In the delivery header control E1EDL18 I used QUALF = 'PGI' (Post goods issue).
    I prepared an inbound WHSCON IDoc according to the documentation mentioned below. I managed to get some feedback from the Idoc processing implying that the system tried to do the goods receipt in the PO but failed.
    To make a long story short here are my questions:
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    Does anybody have an example on how to fill the WHSCON IDoc?
    Or is my approach a cul-de-sac ?
    Kind Regards
       Uwe
    PS: A related question can be found here: Goods Receipt in PO AND Message Flow Update in Inb. Delivery using WMMBXY

    Hi Uwe,
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    The binary answer would be no. You should use WMMBXY or MBGMCR instead.
    But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
    We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
    I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
    Hope this helps. Let me know if you have more questions.
    Regards,
    Rudra

  • How do I link manufacturing label designed in wwi to print automatically during the time of goods receipts from the production

    Hello
    Is there any way to link label to print automatically from the printer at the time of TECO ,Goods receipts from production and PGI at the time of delivery to the customers .
    Regards,
    M D

    Hi !
    GLM supports Automatic Label Print requests & Automatic Label Printing(immediately after generation of automatic print requests). But this is limited to Delivery order, Process Order & Handling Unit as standard. For other scenarios, you will have to customize.
    Automatic Print Request Generation - Global Label Management (EHS-SAF-GLM) - SAP Library
    http://help.sap.com/erp2005_ehp_07/helpdata/en/32/a81051e71e2514e10000000a44176d/content.htm?frameset=/en/00/704e3340074776bb6877aa7edb7394/frameset.htm&current_toc=/en/54/c86cb93bdc4d698eb8e2524b59692b/plain.htm&node_id=38
    But this is possible with "Enhanced" GLM. It's better explained here,
    New changes for GLM in EHP7.0 and ERP 6.0
    Regards
    Subash Sankar

  • Purchasing flow: Differences in Goods Issue and Goods Receipt

    Hi all!
    I am working right now in the Purchasing flow and I have come up to some difficulties. When I make a Purchase Order, there might be differences between the delivery quantity and the received quantity, resulting in possible negative stocks. I have 2 possible options:
    - I make a PO for 10 PC, the vendor makes GI of only 8, and I receive 8, what do I do? Do I pay for 10, or for 8?
    - I order 10 PC, the vendor issues me 10, but I receive 12 (in MIGO). How do I handle this negative stock in transit? Do I make the Goods Receipt of 10 and then make a PO of the other 2 and another GR of only 2?
    Is there any Best Practice to solve these issues? Which is the best way to solve these problems?
    Thank you very much in advance.

    Hi,
    You yourself know the answer partly.
    If PO=10, GR=8 no issues, all the 8units will be received and the invoice will be received for 8units only.
    Nof if PO=10, GR=8 but IR=10 units, now the invoice will be parked for verification, and if the invoice quantity is different from PO quantity, the difference is posted to an account called "Price Difference" account created for this purpose.The invoice will eventually be parked (not posted). Once after getting confirmation on the quantity/price, the invoice will be released for posting.This wholeset of functionality in MM is called as "Logistics Invoice Verification"
    Simlar kind of functionality is also available for the differences in PO quantity and GR quantity.
    The functionality applies not only for differences in quantity, but also for differences in price of each quantity.
    Hope this clears your doubt.

Maybe you are looking for