GPO Software Installation Question

I have our system set to install 3 applications to every computer that connects to the domain. Our portal software, our Virus protection and 90% of the computers need Adobe so I have that pushed out as well.
We also have about 15 Thin Clients set up as Kiosks. I was thinking of connecting them to the domain but I did not want any software pushed out to them. I was wondering if the "Configure software Installation policy processing" setting
in "Computer Configuration/Administrative Templates/System/Group Policy" would work to accomplish this if I link the GPO directly to the OU that contains the Kiosk profiles.

What you can do below mention steps
1.Create a Security group and add all the kioks and thin clients to this group
2.Create a group policy and configure software distribution
3.Apply group policy to the ou where you have all the computers and software
https://support.microsoft.com/kb/816102?wa=wsignin1.0
4.Using Group policy delegation deny applying particular group policy for that computer group which we have created in step 1
http://support.microsoft.com/kb/816100
Darshana Jayathilake

Similar Messages

Unable to automatically install Flash 12 over Flash 11 via GPO Software Installation

We have a GPO software installation to install Flash 12 to a group of Windows 7 64-bit workstations. It works fine on a system that has no previous version of Flash already installed, but when the workstation has Flash 11 installed, the installation fails with an error in the Windows application event viewer saying something referring to installation failed because the previous version of Flash could not be removed.
If we log into the computer and manually uninstall Flash, then the Flash 12 GPO assigned to the computers works at the next reboot. If we manually install Flash 12, by running the Flash installation file as the user, then 12 installs over 11.
I have seen this kind of issue when someone tries to install and older version of flash over a newer version, but I don't think we should be having these problems installing the latest version of Flash.
We have to go to each PC and manually remove Flash 11 before we can install Flash 12 and it is too much time and labor to keep doing this.
What can be done to fix this so that a GPO software installation of the Flash 12 MSI will forcefully replace older versions of Flash without being stopped by this error?

Hi lord_knikon,
I understand your frustration. We've had several users report this, however, we've not been able to reproduce. This happens with the online installer downloaded from get.adobe.com/flashplayer. We've not seen this with the offline installers, posted at the bottom of this help page, http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html. Please try using the offline installer and you should be able to get Flash Player installed on your system.
Maria

GPO Software Installations always require configuring on first run.

Whenever I push out an MSI through a GPO, the first time a user runs the software after logging in requires Windows 7 to configure the product before it will load up. With the exception of VMWare 10, this only happens once per usage of the software
per login and is avoided if the shortcuts created with the install aren't used. If I navigate to the software installation folder and manually run an executable, there is no please wait while windows configures .... For some lesser applications,
removing the shortcuts from the msi and creating manual shortcuts through GPO, I was able to work around the problem, but it's becoming too much of a hassle to keep doing.
So, my question is, how do I stop Windows from configuring applications on first run that are installed through GPO?
Thanks

Kevin,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Software installation question

I just bought studio 8 but I have some old programs on my
laptop, such as Flash MX. Someone told me to uninstall them first
before installing the new programs. Is this necessary or
preferable?

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.

GPO Software Installation Problem

Dear Sir
Recently i install Server 2008R2. And also create a domain controller. In this domain controller i create a OU and create a child OU. In child OU i create 2 child OU. One for Computers and others for Users. I want to install software in this OU of computers.
But the main problem is when i create a GPO to install software when i link msi file to the GPO it give me message "cannot verify path is a network location. If this package is not available from a network share, clients will not be able to install it. Are
you sure you want to deploy this package using this path?" i press ok. I update my group policy from command prompt. what can i do now?

Hi,
You'll have to specify the UNC (\\server\share) to the MSI. Also you need to give read permissions to Authenticated Users at share/NTFS level (used by the computer account to access the MSI)
Jens Ole Kragh MCITP, MCTS, MCT, Microsoft TechNet Influent Denmark http://jensolekragh.wordpress.com/

GPO Software installation failing

Good Day,
I have a very simple MSI file (Screwdrivers) that I am trying to deploy via GPO. The permissions to the network share have both Authenticated Users and Domain Computers have both read and write rights.
Yet the workstations fail to install with the error message below.
The install of application ScrewDrivers Client v4 x64 from policy Install Screw Drivers failed. The error was : %%1612
thank you
Steve J.

Hi Steve,
Thanks for posting.
Would you please help to confirm below items and we can narrow down the troubleshooting scope.
1. Check if this Group Policy has been applied when running “gpresult /v” on the client machines.
2. Check if the folder storing the MSI package can be manually accessed from the problematic client machines.
3. You may also create a new shared folder and put the MSI package for test.
4. Check if this issue occurs when applying another MSI package.
If the problem continues, please collect the following information:
Info 1: Please collect the MPSReport from Windows Server 2008 R2. ===============================================
1. Download proper MPS Report tool from the website below.
Microsoft Product Support Reports
http://www.microsoft.com/downloads/details.aspx?FamilyID=CEBF3C7C-7CA5-408F-88B7-F9C79B7306C0&displaylang=en
2. Double-click to run it, if requirement is not met, please follow the wizard to download and install them. After that, click Next, when the "Select the diagnostics you want to run" page appears, select "General",
“Internet and Networking”, “Business Networks”, “Server Components”, click Next.
3. After collecting all log files, choose "Save the results", choose a folder to save <Computername>MPSReports.cab file.
Info 2: Collect userenv.log and appmgmt.log files
================================ =================
Please find a client machine, then enable userenv.log and appmgmt.log on it and then reproduce this issue. For the detailed steps, please refer to this KB article:
http://support.microsoft.com/default.aspx?scid=KB;EN-US;246509
http://support.microsoft.com/default.aspx?scid=KB;EN-US;221833
Hope this helps.
Best Regards,
Elaine
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Software Installation issues via GPO

Hi there,
I have created a new GPO (computer configuration) that deploys Sketchup Pro 2014 to computerson the network.
My tester computer refuses to install it.
Here are the System Events i receive:
Event 101:
The assignment of application SketchUp 2014 from policy Application Delivery - Sketchup 2014 failed. The error was : %%1274
Event 103:
The removal of the assignment of application SketchUp 2014 from policy Application Delivery - Sketchup 2014 failed. The error was : %%2
Event 108:
Failed to apply changes to software installation settings. The installation of software deployed through Group Policy for this user has been delayed until the next logon because the changes must be applied before the user logon. The error was
: %%1274
Event 1112:
The Group Policy Client Side Extension Software Installation was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before
the next startup or logon for this user, and this may result in slow startup and boot performance.
I restarted the machine a few times with no result.
I also have: [Computer Configuration\Policies\Administrative Templates\System\Logon\Always wait for the network at computer startup and logon = enabled]
All of my computers are equipped with SSD drives, not sure if that would matter, i had a heck of a time with GPOs and SSDs before.
Any help?
Thanks,

I think I just found a solution.
As per this
thread:
Computer Configuration > Policies > Administrative Templates > System > Group Policy > Policy > Startup policy processing. Change from default to Enabled and 30 sec.
Does the trick.

Configuring WMI Filters or GPO for Software Installation restirctions

Good day all,
I am trying to configure a first time WMI filter to prevent my users from installing new software. I don't want to restrict anything they currently have as it is working fine. They have very minimal programs installed as is (MS Office, IE, Java, etc..).
I would like to keep what they have and prevent new installations using either GPO or WMI filters.
I have checked a few posts prior to writing here, but I am not familiar with alot of the code or jargon that is used. I am as I said, trying this for the first time. I have been checking the below link and got as far as step 7. This is where I get lost.
http://technet.microsoft.com/en-us/library/jj899801.aspx
http://technet.microsoft.com/en-us/library/cc947846%28WS.10%29.aspx
I just need something very basic that says "You can't install this, call IT" with any new install attempts.
PS. You guys have been a great help in the last few weeks for me.
Dario Garcia

Hi Dario,
Based on your description, I understand that you want to prevent domain users from installing software via
group policy. If anything I misunderstand, please don’t hesitate to let me know.
As you know, you can use
Software Restriction Policies. May also be able to use
AppLocker. For more details, please refer to following thread.
Block
software installations -GPO
In addition, from your this thread, I noticed that you focus on
WMI filter. Did you mean that you want to know how use WMI Query to filter correct Windows version or any other? Sorry for my confusion.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Software Installation fails via GPO

GP SERVER:
Windows Server 2008 R2 Standard 64 Bit
CLIENT PC's:
Windows 7 Professional 64 Bit
DEPLOYMENT INFORMATION:
General:Deployment
type - Assigned
Deployment source - \\SERVER\FOLDER\MSI.mis
Uninstall this application when it falls out of the scope of management - Disabled
Advanced Deployment Options:
Ignore language when deploying this package - Disabled
Make this 32-bit x86 application available to Win64 machines - Enabled
Include OLE class and product information - Enabled
Permissions:
Allow
XXXXXXXX\Domain Admins
Full control
No
Allow
NT AUTHORITY\Authenticated Users
Read
No
Allow
NT AUTHORITY\SYSTEM
Full control
No
Allow
XXXXXXXX\Domain Admins
Read, Write
Yes
Allow
XXXXXXXX\Enterprise Admins
Read, Write
Yes
Allow
NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS
Read
Yes
Allow
NT AUTHORITY\Authenticated Users
Read
Yes
Allow
NT AUTHORITY\SYSTEM
Read, Write
Yes
Allow
CREATOR OWNER
Read, Write
Yes
Administrative Templates:
Startup policy processing time – Enabled 30 seconds
Always wait for the network at computer startup and logon - Enabled
Error(s) on test client OC:
Sourced from Windows Logs > System
Error 1 - "The install of application XXXXXX from policy XXXXXX install failed. The error was: %%1612"
Error 2
- "Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was:
%%1612"
Based on the information above, is anyone able to advise if there is anything I have overlooked?
Jeet S

Good Morning,
So despite numerous variations and permission settings we are still experiencing problems with this. So this is what has been done so far –
The msi file has been moved to another location on the network which we know works for other msi files –
This did not work although when we check event viewer, gpresult and RSOP the policy is being applied but the software installation is failing.
Added domain users to local admins. The share folder containing the source msi has
Everyone setup for read and execute permission –
This made no difference
Tried running the msi file logged in as administrator and also tried running the msi whilst logged in as myself –
The msi runs fine for administrator but will not run when logged in as myself and gives the following error:
Software installation failed due to the error listed below. The installation source for the product is not available. Verify that the source exists and that
you can access it.
The msi contains an upgrade to our antivirus software. I setup two machines one with the old antivirus software installed on it and the other without any antivirus software on it. Logged in as domains users on each machine and did a gpupdate /force /boot
After logging back in I ran RSOP and found that on the machine which had no antivirus on it to begin with there was an error for software installation stating –
Fatal error during software installation. For the machine that had antivirus already installed on it there was no such error and the software installation states that the installation was successful and yet the new A/V software is still not installed.
This morning I got in early to try and do some more work on this but my boss was already here and advised that even a login script will not work so he has installed it manually on one of the machines and it appears to have worked fine. Not really sure where
to go from here.
Jeet S

Gourp Policy software installation suddenly stopped working

My GPO'S were all in wonderful working order, I just imaged 30+ machines using the same policies with no problem.
Now I have to deploy more machines but the GPO'S are not applying. I ran gpresult on one of the computers in question and get the message under component status\software installation: "The installation source for
this product is not available. Verify that the source exists and that you can access it."
As far as I know the permissions on the share have not changed. sharing permissions are: domain admins- full control. Everyone- Read access.
Security Permissions are: administrators (servername\administrators)- full control. Creator Owner-Special Permissions. Domain Admins- Full Control. Domain Users- Read & execute, list folder contents. SYSTEM- full control. Users- (servername\users)- Read
& execute, list folder contents.
I could really use some help on this, spent the last few days smashing my head on my desk.

> under component status\software installation: "The installation
> source for this product is not available. Verify that the source exists
> and that you can access it."
grab a copy of psexec, open an admin commandline and run "psexec -s
cmd". Can you access your source files in that session? In addition,
examine application event log for the exact source path.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Solaris 7 Software Installation on x86 System Problem

Experienced error message "disk not found" just prior to Solaris execution of final installation process. This was during Interactive installation. Also recieved "cannot determine boot device name". Could not use set env command in order to set the boot device. It is telling us that there is no boot device set up. Need some information/commands that will enable me to get over this problem and complete the software installation.
This could very well be a simple fix, I just don't have the knowledge bas eto effect it. Please contact at [email protected] or 540 657-6585.
Thanks
Ken

I hope this can help you. I recently posted the similar question on the development group and got help from 'agood214' which I think is the best answer.
(All credit should be to agood214)
Okay, here's the followup and results for my install method.
1. It worked
2. Partition magic and Boot magic are not needed to make this happen.
3. Partition and boot magic do not recognize the solaris partitions on the second master IDE. In fact they give an error ( #110) and offer to "fix" the dirve which will corrupt the install of Solaris.
4. I had scanned the newsgroups and found a utiliuty called XOSL - Extended Operating System Loader at http://www.xosl.org it works like and absolute charm!
=== Other installation notes - mostly my machine is not on the Hardware Comaptibility List but I figured I'd give it a try. System is a K6-III 450 Mhz ( not on HCL) Iwill XA-100A Plus motherboard ( not on HCL ) Sblive PCI valueboard ( not on HCL ) Siig high speed serial board - PCI (not on HCL) Diamond 56k PCI modem ( not on HCL ) I had to remove the modem and serial card as well as dispable PnP in the BIOS.
Then everything loaded pretty normal.
====
agood214 was using two physical drivers, but I tried on one 13 GB Hard Drive with 4 partitions (Solaris7, Win98, Win2000, data-partition) and working beautifully. In my case, I didn't have to disable anything in the BIOS to get them work. Just read though the manual in XOSL if you want to use this boot-loader and it is very easy to install. NOTE: you can not use 'instant boot' in XOSL to boot with the combination of WIN-OS and Solaris. Besides it, everything is prefect.

Applying Software Installation Policy Is Taking Long Time During Boot Process

1 of my servers is having slow boot up issue. I have enabled user environment debugging and the gpsvc.log file has been generated. I have also used the Windows Performance Analyzer to capture logs and results came back that the GP Client is taking a long
time in the boot process. So, I reckoned the slow boot is due to GPO but I am not sure where to look from this log file.
I have only paste part of the gpsvc.log file here due to limitation in the number of characters allowed to be posted. Would appreciate some good advise on this issue that I am facing.
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {FB2CA36D-0B40-4307-821B-A13B252DE56C}
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {fbf687e6-f063-4d9f-9f4f-fd9a26acdd5f}
GPSVC(34c.408) 04:03:30:109 GetMachineToken: Looping for authentication again.
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Logging Data for Target <SW01E772>.
GPSVC(34c.408) 04:03:30:109 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:109 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 Sync Lock Called
GPSVC(34c.408) 04:03:30:109 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:109 Lock taken successfully
GPSVC(34c.408) 04:03:30:109 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 UnLockedsuccessfully
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: OpenThreadTokenfailed with error 1008, assuming thread is not impersonating
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Processing extension Registry
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes and nosecurity group membership change and extension Registry has NoGPOChangesset.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Wireless Group Policy
GPSVC(34c.408) 04:03:30:125CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Wireless Group Policy's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Wireless Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Environment
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Group Policy Environment's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Group Policy Environment skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:156 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:156 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:156 Sync Lock Called
GPSVC(34c.408)04:03:30:156 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:156 Lock taken successfully
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: Entering for extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:156 MachinePolicyCallback: Settingstatus UI to Applying Group Policy Local Users and Groups policy...
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: No changes. CSEwill not be passed in the IwbemServicesintfptr
GPSVC(34c.364)04:03:30:156 Message Status = <Applying Group Policy Local Users and Groups policy...>
GPSVC(34c.364) 04:03:30:156 Setting GPsessionstate = 1
GPSVC(34c.408) 04:03:31:796 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, dwStatus= 0x0
GPSVC(34c.408) 04:03:31:953 GetWbemServices: CoCreateInstancesucceeded
GPSVC(34c.408) 04:03:36:031 ConnectToNameSpace: ConnectServerreturned 0x0
GPSVC(34c.408) 04:03:36:140 ProcessGroupPolicyCompletedExInternal: Extension {17D89FEC-5C44-4972-B12D-241CAEF74509} was able to log data. Error = 0x0, dwRet= 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Local Users and Groups> at 44203 ticks (ms)
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, Return status dwRet= 0x0
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups returned 0x0.
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups status was not updated because there was no changes and no transition or rsopwasn't enabled
GPSVC(34c.408) 04:03:36:500 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:36:500 UnLockedsuccessfully
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Device Settings
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Group Policy Device Settings'sstatus or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Group Policy Device Settings skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Folder Redirection
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Folder Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Folder Redirection skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Microsoft Disk Quota
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Microsoft Disk Quota's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Microsoft Disk Quota skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Network Options
GPSVC(34c.408) 04:03:36:531CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Options'sstatus or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Group Policy Network Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension QoSPacket Scheduler
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension QoSPacket Scheduler's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension QoSPacket Scheduler skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Scripts
GPSVC(34c.408) 04:03:36:546 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes and no security group membership change and extension Scripts has NoGPOChangesset.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Remote Desktop USB Redirection
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Remote Desktop USB Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Remote Desktop USB Redirection skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Internet Explorer Zonemapping
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Zonemapping'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Internet Explorer Zonemappingskipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Drive Maps
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Drive Maps'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Drive Maps skipped withflags 0x7.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processingextension Group Policy Folders
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folders'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Folders skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Network Shares
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Shares's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Network Shares skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Files
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't readextension Group Policy Files's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Data Sources
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs:No GPO changes but couldn't read extension Group Policy Data Sources's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Group Policy Data Sources skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Group Policy Ini Files
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Group Policy Ini Files's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension GroupPolicy Ini Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Internet Explorer User Accelerators
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't readextension Internet Explorer User Accelerators's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Internet Explorer User Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Security
GPSVC(34c.408) 04:03:36:578ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes and no security group membership change and extension Security has NoGPOChanges set.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Deployed Printer Connections
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Deployed Printer Connections's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Deployed Printer Connections skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Services
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Services's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Services skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Internet Explorer Branding
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Branding's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Internet Explorer Branding skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group PolicyFolder Options
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folder Options's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Folder Options skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Scheduled Tasks
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Scheduled Tasks's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Scheduled Tasks skipped because both deletedand changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Registry
GPSVC(34c.408) 04:03:36:593 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:625 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408)04:03:36:625 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:625 Sync Lock Called
GPSVC(34c.408) 04:03:36:625 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:625 Locktaken successfully
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: Entering for extension Group Policy Registry
GPSVC(34c.408) 04:03:36:625 MachinePolicyCallback: Setting status UI to Applying Group Policy Registry policy...
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:625 Setting GPsession state =1
GPSVC(34c.408) 04:03:36:765 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, dwStatus = 0x0
GPSVC(34c.408) 04:03:36:796 GetWbemServices: CoCreateInstance succeeded
GPSVC(34c.408) 04:03:36:812 ConnectToNameSpace: ConnectServer returned 0x0
GPSVC(34c.408) 04:03:36:812 ProcessGroupPolicyCompletedExInternal: Extension {B087BE9D-ED37-454F-AF9C-04291E351182} was able to log data. Error = 0x0, dwRet = 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Registry> at 44546 ticks (ms)
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, Return status dwRet = 0x0
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry returned 0x0.
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry status was not updated because there was no changes and no transition or rsop wasn'tenabled
GPSVC(34c.408) 04:03:36:843 UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:843 UnLocked successfully
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension 802.3 Group Policy
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension 802.3 Group Policy's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension 802.3 Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Printers
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Printers's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Printers skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Shortcuts
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Shortcuts's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Shortcuts skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:890 ProcessGPOs: Processing extension Software Installation
GPSVC(34c.408) 04:03:36:890 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:890 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:890 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408) 04:03:36:890 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:890 Sync Lock Called
GPSVC(34c.408) 04:03:36:890 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:890 Lock taken successfully
GPSVC(34c.408) 04:03:36:890 ProcessGPOList: Entering for extension Software Installation
GPSVC(34c.408) 04:03:36:890 MachinePolicyCallback: Setting status UI to Applying Software Installation policy...
GPSVC(34c.408) 04:03:36:890ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:890 Message Status = <Applying Software Installation policy...>
GPSVC(34c.364) 04:03:36:890 Setting GPsession state = 1
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation returned 0x0.
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation status was not updated because there was no changes and no transition or rsop wasn't enabled
GPSVC(34c.408) 04:03:37:312UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:37:312 UnLocked successfully
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension TCPIP
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension TCPIP's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension TCPIP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Internet Explorer Machine Accelerators
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Machine Accelerators's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension Internet Explorer Machine Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension IP Security
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension IP Security's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension IP Security skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Group Policy Internet Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Internet Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Internet Settings skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Start Menu Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Start Menu Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Start Menu Settings skipped because both deleted and changed GPO listsare empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processingextension Group Policy Regional Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extensionGroup Policy Regional Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy RegionalOptions skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Power Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Power Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Power Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Audit Policy Configuration
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Audit Policy Configuration's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Audit Policy Configuration skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Applications
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Group Policy Applications's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Group Policy Applications skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extension Enterprise QoS
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Enterprise QoS's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Enterprise QoS skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extensionCP
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension CP's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension CP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 gpGetFgPolicyRefreshInfo: Mode: 1, Reason: 7
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Previous Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Next Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: No WMI logging done in this policy cycle.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Boot/Logon Policy processing - checking if UBPM trigger events need to be fired
GPSVC(34c.408) 04:03:37:375 CheckAndFireGPTriggerEvent: FiredPolicy present UBPM trigger event for Machine.
GPSVC(34c.408) 04:03:37:375 Application complete with bConnectivityFailure = 0.
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xc8c
GPSVC(34c.79c) 04:03:40:546 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3a0) 04:03:40:546 Target = Machine
GPSVC(34c.79c) 04:03:40:546 Client_RegisterForNotification: User =machine, changenumber = 0
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Entering withtarget Machine and event 0x1ac
GPSVC(3bc.ac8) 04:03:59:296 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.748) 04:03:59:296 Target = Machine
GPSVC(3bc.ac8) 04:03:59:296 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.748) 04:03:59:343 Target = Machine
GPSVC(34c.748) 04:03:59:343 Target = Machine,ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:515 Target = Machine
GPSVC(34c.3ac) 04:03:59:531 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:531 Sid = (null), dwTimeout = 600000, dwFlags = 268435456
GPSVC(34c.3ac) 04:03:59:531 LockPolicySection calledfor user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Async Lock called
GPSVC(34c.3ac) 04:03:59:546 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(34c.3ac) 04:03:59:546 Sid = (null)
GPSVC(34c.3ac) 04:03:59:546 UnLockPolicySection called for user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(34c.3ac) 04:03:59:546 Settinglock state as notLocked
GPSVC(34c.3ac) 04:03:59:546 UnLocked successfully
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xd04
GPSVC(34c.bdc) 04:04:00:000 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:04:00:000 Target =Machine
GPSVC(34c.bdc) 04:04:00:000 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:04:00:000 Target = Machine, ChangeNumber 0
GPSVC(34c.748) 04:04:01:140 Target = Machine
GPSVC(34c.748) 04:04:01:140 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:509CGPNotify::RegisterForNotification: Entering with target Machine and event 0x458
GPSVC(154.41c) 04:05:25:509 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:509 Target = Machine
GPSVC(154.41c) 04:05:25:525 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:525 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:525 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(154.41c) 04:05:25:759 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x4e8
GPSVC(154.41c) 04:05:25:759 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:759 Target = Machine
GPSVC(154.41c) 04:05:25:775 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(154.41c) 04:05:25:775 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:05:25:775 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:05:59:217 Target = Machine
GPSVC(34c.3ac)04:05:59:233 Target = Machine, ChangeNumber 0
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::UnregisterNotification: Entering with event 0x1ac
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(3bc.3cc) 04:05:59:405 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(3bc.3cc) 04:05:59:420 Client_CompleteNotificationCall: failed with 0x4c7
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(34c.360) 04:06:00:827 Target = Machine
GPSVC(34c.360) 04:06:00:827 Target = Machine, ChangeNumber 0
GPSVC(34c.360) 04:06:01:155 Target = Machine
GPSVC(34c.360) 04:06:01:171 Target = Machine, ChangeNumber 0
GPSVC(34c.fe8) 04:06:02:124 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x218
GPSVC(34c.fe8) 04:06:02:140 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.360) 04:06:02:155 Target = Machine
GPSVC(34c.fe8) 04:06:02:155 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.fe8) 04:06:02:171 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.da4) 05:06:16:856 Target = Machine
GPSVC(34c.da4) 05:06:16:856 Target = Machine, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:856 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Callerrequesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Caller requesting for usernotification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:887 Could notfind user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:887 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:26:981 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:341 SID = S-1-5-21-206128196-3657029889-627342018-7757
GPSVC(34c.de8) 05:06:32:356 bMachine = 0
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:356 Message Status = <Applying user settings...>
GPSVC(34c.778) 05:06:32:356 StartTime For network wait: 32140ms
GPSVC(34c.778) 05:06:32:356 Current Time: 3819953ms
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.778) 05:06:32:356 MaxTimeToWaitForNetwork: 5212ms
GPSVC(34c.778) 05:06:32:356 TimeRemainingToWaitForNetwork: 0ms
GPSVC(34c.778) 05:06:32:356 UserPolicy: Waiting for machine policy wait for network event with timeout 0 ms
GPSVC(34c.778) 05:06:32:388 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 65538
GPSVC(34c.778) 05:06:32:388 LockPolicySection called for user <Machine>

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Printer Software Installer has stopped working

Product: HP Laser Jet M1005 MFP
OS: Windows 7, 64-bit
Notebook ACER , Aspire 5349, Intel Celeron CPU B800 @ 1.50 GHz
(new notebook, old printer - printer worked well on Windows XP)
I downloaded driver ljM1005-HB-pnp-x64-en. Driver had been extracted and setup started.
Installation started and after some initialization (~10 sec) it kept writing:
Preinstalling the driver files... or Copying files to hard drive... (switching approx. once per second) after a while (~ 20 sec)
Printer Software Installer has stopped working. Windows tried to find solution but did not find anything.
I TRIED ALREADY EVERYTHING. I used patch for AMD processors (of course, did not work); I have Windows installer up to date; I disabled Internet Explorer 9.0 (I cannot uninstall and iether can I step back to IE 8.0 since notebook is brand new); There is no windows driver preinstalled for this printer and there is no similar driver working.
Driver cannot be installed and printer does not work.
Please, help.

Hello,
Thanks for the post. This is an odd one, I might suggest the method outlined below in the third link, if that does not help, I might recommend that you post this question on the following links below. Good Luck!
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

How to disable Next Generation Java Plug-in for GPO software deployments?

Is there a way to disable the Next Generation Java Plug-in using a script or batch file for GPO software deployments?
Our group needs to deploy JRE 6 Update 20 to a large number of Oracle Financials users. As part of this deployment, we need to disable the Next Generation Java Plug-in as part of the installation for each desktop. Our plan is to extract the MSI installer package from Sun and create a GPO for software deployment.
It seems you cannot disable the Next Generation Java Plug-in using a simple registry hack or customized MST transform file. Is there another method for disabling Next Generation Java Plug-in?

btenney,
Thanks very much for your suggestion. Can you explain what the parameters are on the ssvagent.exe that you noted -high -jpisetup -old? I can't seem to find any information on the parameters. Also, will this set the configuration just for the user logged on (current user) OR for all users existing and future?
We are having trouble getting next-gen java shut off for all possible users that may logon to a machine in future .. thus looking at putting in bootup login script, but hoping there is a better way to have it take affect at the machine level. Or to at least automate at the user level (existing and future windows users/profiles)

Insufficient permissions for software installation

We are experiencing following error message when installing software from software center using SCCM 2012 SP1 “Insufficient Permissions for software installation”. only when users (without local
admin) are login. This error is only happening to small number of clients while other clients are installing with no issue.
I have found following KB and it is the same issue:
http://social.technet.microsoft.com/Forums/en-US/e2e68509-d6ee-4975-86b5-4894d2d6895f/software-center-permissions-error-sccm-2012?forum=configmanagerapps
Is it possible a GPO policy and if yes what will be the configuration information to verify.

Hi,
Are there two clients with this error in the same domain and with the same GPO applied?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

GPO Software Installation Question

Similar Messages

Maybe you are looking for