GR-Base IV indicator not ticked

Hi,
Accidently the user has not ticked the GR-Base IV indicator in PO ,
further GR is allready done on lot wise & material is issued to sub contractor for processing
while processing MIRO we are getting the consolidated amount of all GR whic is not acceptable,
WE HAVE RECEIVED INVOICE BASED ON LOT WISE DELIVERY & Finance needs to make the payment against the GR lot quantity deliverded
Please help how to resolve this issue
Regards
sam

Hi,
Make the MIRO on delivery Note or Bill of landing if u have untick GR IV.
U must have different delivery note per separate Delivery
Regards,
Pardeep Malik

Similar Messages

Not able to do GR for PO's , Delivery Completion Indicator Not Ticked

Hi ,
In SRM 5.0
Users Not able to do GR for PO's eventhough Delivery Completion Indicator Not Ticked , having Confirmation Roles
Either the PO is not appearing in the List or when they click the confirmation icon , the screen is not taking to the next screen to enter the quantity.
What all must be the probable reasons.
Thanks & Regards,

Hello,
You can check following things,
1. User in the PO should be correctly assigned in org without any sync errors(check users_gen)
2. Check in PO if the Confirmation/services performed tick is assigned properly.
3. Check if the PO in SRM and backend is correctly synchorinzed with PO in Ordered status.
4. Finally if there is any existing confirmation for the PO, then they can create the next confirmation only after the earlier conf is synchronized with backend, which means it would depend upon your schedule of clean_reqreq_up report.
Regards,
Sanjeev

Allowed goods movement indicator not ticked in Reservations

Hi All,
Currently when i am creating a shopping cart ,the reservations which are created in the backend system do not have the allowed goods movement indicator ticked.can we have it ticked automaticaaly like it is when we normally create the reseravtions manually.
Regards,
Pawan.

Hi Pawan,
Please check the following SAP OSS Notes as well -
Note 373205 EBP: Allow goods movement indicator (manual addition)
Note 373231 EBP: Allow goods movement ind. not in Customizing backend
Note 447352 BBPPS01: Account assignment category of network component
Note 373464 EBP:Reserv.Backnd ind.gds mvmnt permit.(3.1Plug-in)
Note 322674 BBPOR01: Purchasing data are not displayed
Note 520813 FAQ: BAPIs for goods movements
Note 447352 BBPPS01: Account assignment category of network component
The field MOVEMENT is not being filled by SRM in the standard.
You should set it yourself in badi BBP_CREATE_BE_RS_NEW...
BR,
Vijay Mittal.
Please award the points for help.

Transaction type 148: affiliated company indicator not allowed

I am trying to create new transfer variant for intercompany asset transfers, but when saving I am getting error AC768 Transaction type 148: affiliated company indicator not allowed'.
Interesting, transaction type 148 is not used in any of the existing transfer variants. Even if I don't change anything in any variant I am still getting this error message. I switched it off in t-code OBA5 (after adding it in OBMSG), but I am still getting that error message and I am not able to create new transfer variant.
Is there any other option that to modify this transaction type 148? It is standard so I don't want to modify it.

Hi,
please go to transaction OABE and try to tick the Gross transfer indicator. kindly provide feedback if it solves your current error.
Regards,
otep

VERSION "completed" Indicator not restricting further GR and IR of PO

Dear SAP Gurus,
(Sorry, re-creating the Post as the earlier one was created by other user and is closed and i could not assign any points for valuable answers)
In my case the Version management is behaving in a strange manner,
I have created a PO value 1000 unit, and got it released,
now change the value to 2000 it asks for version management i fill the Reason and Text field at Version Management TAB, the system is not asking me to Mark the Version completed indicator ( it is not a mandatory field)
but my biggest issue is even though the Version Completed Indicator is not Ticked the PO could be used for subsequent process,
there can be GR made for this PO, and also Invoice made for the same PO,
system is allowing further processing of the PO where VERSION "completed" Indicator is not ticked.
Please guide if there is any Config to restrict the PO where VERSION completed Indicator is not ticked from going to GR and IR,
( as per the previous posts i also feel making VERSION completed Indicator as mandatory field is not a best Practice, as it will cause new version for small changes in PO)
Thanks and Regards
S Kumar

Hello,
Thanks for ur reply,
Yes we have release stratergy implemented, and our release is also not reset until we tick the version Completed Indicator,
This is really making the system vulnerable as people can make any changes to Qty and Value and neither the system is asking for New version nor resetting the existing Release,
and people can use the PO for Making GR and IR as well, which is not acceptable.
Please guide if any Config is missing to check the same,
Thanks and Regards,
S Kumar

What is the problem---"Load Indicator not supported by OS !"

I found a lot of error messages in
$ORACLE_HOME/admin/$ORACLE_SID/bdump/pmon_DDD.trc today.
Where, DDD is a 3 or 4-digit number.
All the messages are the same, "Load Indicator not supported by
OS!":
*** SESSION ID:(1.1) 1999.11.18.18.48.02.435
OER 536879337 in Load Indicator : Error Code = 587494760 !
*** 1999.11.18.18.48.43.590
Load Indicator not supported by OS !
*** 1999.11.18.18.49.18.690
Load Indicator not supported by OS !
*** 1999.11.18.18.49.52.460
Load Indicator not supported by OS !
*** 1999.11.18.18.50.26.230
Load Indicator not supported by OS !
*** 1999.11.18.18.51.00.000
Load Indicator not supported by OS !
*** 1999.11.18.18.51.33.770
Load Indicator not supported by OS !
*** 1999.11.18.18.52.07.540
Load Indicator not supported by OS !
I checked our another Oracle 8i server, the error occurs too.
My systems are all Redhat 6.1, glibc 2.1.2.
The Oracle Server is Oracle 8i 8.1.5 for Linux, Enterprise
Edition, and with the latest patch.
What's wrong?
null

I agree. Could it be the shm settings in the hernal itself? I
recall some suggested mods in the release docs.
Shane Quigley (guest) wrote:
: I don't think that this change will make any significant
: improvement with the problem at hand. It seems that there is a
: background process that try to call the "Load Indicator"
: periodically at intervals of about a second. I have this
: problem as well and the problem goes beyond they process
monitor
: (pmon) it seems as though the server logs the problem as well
: the error is as follows:
: skgm warning: EINVAL creating segment of size 0000000000370000
: fis the shm parameters in /etc/system or equivalent.
: I don't know if this helps any but all I know is that changing
: the specification of the location of the control files will not
: change anything. If no path is set when specifying the
location
: ie. control_files=(control01.ctl,control02.ctl)
: then the default path is chosen. By explicitly setting the
path
: ie. control_file=
: (/database/db1/control01.ctl,/database/db1/control02.ctl)
: just allows you to specify a location that does not exist in
: your current path.
: If you have any further information regarding the problem
please
: let me know. In my configuration the control files have their
: entire path specified and I still get this problem.
: PS. Do you know if this problem could cause the OS to crash?
: Wiwih Gunadi (guest) wrote:
: : The problem is with your
: : initSID.ora file in $ORACLE_BASE/admin/$ORACLE_SID/pfile
: : directory.
: : edit this file and find the "control_file" parameter
: : most likely what you have there doesn't match your
: : actual control file names
: : mine says:
: : control_file=(ora_control1, ora_control2)
: : i changed it to:
: : control_file=(/your/oracle/base/oradata/control01.ctl,
: : /your/oracle/base/oradata/control02.ctl)
: : then the database will mount correctly, but I still can't
: : open it because of error ora-01571 something about redo logs
: : being incompatible.
: : Hope this helps,
: : G. Young (guest) wrote:
: : : I found a lot of error messages in
: : : $ORACLE_HOME/admin/$ORACLE_SID/bdump/pmon_DDD.trc today.
: : : Where, DDD is a 3 or 4-digit number.
: : : All the messages are the same, "Load Indicator not
supported
: by
: : : OS!":
: : : *** SESSION ID:(1.1) 1999.11.18.18.48.02.435
: : : OER 536879337 in Load Indicator : Error Code = 587494760 !
: : : *** 1999.11.18.18.48.43.590
: : : Load Indicator not supported by OS !
: : : *** 1999.11.18.18.49.18.690
: : : Load Indicator not supported by OS !
: : : *** 1999.11.18.18.49.52.460
: : : Load Indicator not supported by OS !
: : : *** 1999.11.18.18.50.26.230
: : : Load Indicator not supported by OS !
: : : *** 1999.11.18.18.51.00.000
: : : Load Indicator not supported by OS !
: : : *** 1999.11.18.18.51.33.770
: : : Load Indicator not supported by OS !
: : : *** 1999.11.18.18.52.07.540
: : : Load Indicator not supported by OS !
: : : I checked our another Oracle 8i server, the error occurs
too.
: : : My systems are all Redhat 6.1, glibc 2.1.2.
: : : The Oracle Server is Oracle 8i 8.1.5 for Linux, Enterprise
: : : Edition, and with the latest patch.
: : : What's wrong?
null

Data Mart Status of the request is not ticked

Hello Everybody,
I am the first time to deal with BW.
After I loaded the data to the ODS, the request in the manage data view was not ticked as the others although the job was completed successfully.
Does anyone can help?
Many Thanks
F-B-I

Hi,
have you deleted the data mart status in ods .
u need to follow these steps
1, if you chenged the status to red no need to delete the datamart status in ods .you can load the data from ods to infocube.
2, if the status green and need to delete the datamart symbol in ods.
regards
sivaraju

Service Desk: Basis Message has not been created

Hi Experts
After applying the laster patches on our SolMan (CRM Component) the Service Desk is not working properly.
When creating a ticket with TA NOTIF_CREATE the error message pops up:
Message 000000XXXX created in <SID> with the following error: Basis message has not been created.
We use the standard Notification types. Like SLFN and SLF1 (For ABA message)
In TA DNO_CUST01 there is the standard config. activ also standard Action Profile: SLFN0001_STANDARD_DNO
Number Range: 01
Application: DNO_NOTIF
In TA DNO_CUST04: PROCESS_TYPE: SLFN, RFCDEST_SOL_MANAGER: NONE
The ticket is available in the monitor TA, but the ABA Message is missing. All the details concerning the satellite System is missing too and can also not be maintained manually.
If someone has had this problem as well, I would be very interested to hear the solution.
Thank you very much for your help.
Dominik

Hello Dominik,
so log is red right like you have an error ?
I don t understand why you have this log though cause this message is 060 from class 'DNO'. And there is only 4 function calls that launch error with parameter you re facing (I_PARN) that concerns partners (actors of your ticket) !
And when putting a breakpoint in these 4 function calls and retesting; Solman, at least mine does nt go in any one of them.
You can maybe do the test on your side. The 4 function moduls are (tr SE37, first line each time)
DNO_DB_EX_PAR_USER_CHECK
DNO_DB_EX_PAR_USER_DISP
DNO_DB_EX_PAR_ADDR_CHECK
DNO_DB_EX_PAR_ADDR_DISP
Please put a break point in each one of them and launch transaction crmd_order again and retest.
Could you please confirm that Solman goes there and that parameter i_parn is actually empty...?
Regards
Khalil
Edited by: Khalil SERRHINI on Aug 2, 2010 3:08 PM

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this?

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!

iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

Problem Gr/ir a/c where open line item is not ticked

In gl master in gr/ir a/c open line item is not ticked and for that when we see the report from fbl1n it's showing in red and the problem is continuing from the implementation year 2009. what will be the simple solution.
Regards
abhisekh mandal

Hi
Check the link
Change GL to open item managed
Regards
Sanil

Delivery completed indicator not working..

HI SAP expers,
some purchase orders not getting chick mark of Delivery completed indicator ater receiving goods
i have PO with 100 qty . then GR 100 qty . but its not taking in the purchas eorder
Delivery completed indicator not check automaticalley. i did all the configuration in spro-mm-inventory-GR-indi extt...
most of th ePO or getting but some POs or not getting.. is there any settings behind MATERIAL MASTER or any .?
Regards,
Anthyodaya.

Try the following config..
1. Set Delivery complete indicator at plat leve
spro - mm --inventory mgmt -
Goods receipt -
Set delivery complete indicator
2. COntrol field selection for MIGO to disable users from changing it.
spro --> Materials Mgmt --> Inventory Mgmt --> Settings for enjoy Transaction --> Field Selection for MIGO
set field : "Del.Completed" Ind. GOITEM-MIGO_ELIKZ to Display

HT1199 My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

You already have the software installed that you need if you have 10.8.2.
If AirPort Utility cannot find the Express, that is another matter. More software is not needed. More troublehooting is needed.
Power up the Express for a full minute
Hold in the reset button on the Express for 7-8 seconds and release
Allow a full minute for the Express to restart
Click the AirPort icon at the top of the Mac's screen
Look for a heading of New AirPort Base Station
Just below that, click on AirPort Express
What happens?

Excise base value is not changing in MIGO excise tab for Import PO scenari

Dear Gururs,
We are using MIGO to capture & Post Excise Invoice for our Import PO (PO type ZIMP). the problem is, when we change the qty in MIGO Qty tab, corresponding base value is not getting update in Excise tab. we are not creating the planned cost mIRO directly we do the GRN.
Please suggest a solution.
Thanks
Shital

Hello Shital ,
You are using the India Scenario right?
The issue can be because you have not assigned a zero tax code to the line item. For India please make the tax code field in PO as mandatory so that the user does not save the PO without atleast a zero tax code.
Maintain the tax code & proceed. You will see the tab in MIGO.
Regards
Plauto

Want an Error message if the New Version is not ticked Completed in a PO

Hi All,
I want to display an error message if the New Version created while making any changes in a PO is not ticked Completed in the Header--> Versions. Please tell me in detail how can this be done?

Hi,
To do this goto IMG->MM->Purchasing->Version Management->Set up Version Management for External Purchasing Documents
Here Tick on Version Active & in Field Selection in the relevant fields where you want users to enter data make them as Required Entry. This will post an error message when ever it is not complete.
regards,
JP

HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
Is there a way to resolve this issue?

GR-Base IV indicator not ticked

Similar Messages

Maybe you are looking for