Hacking Team 0-Day Shows Widespread Dangers Of All Offense, No Defense

"The Hacking Team is composed of hackers and security engineers working for the government. They have access to highly confidential data and they likely have a target on their back," says Darren Guccione, CEO of Keeper Security."Despite whether these passwords were currently in-use or the cause of the breach, reusing the same passwords or using weak passwords is a serious cause for concern for a team of government security experts and hackers."http://www.darkreading.com/attacks-breaches/hacking-team-zero-day-shows-wide-spread-dangers-of-all-o...
This topic first appeared in the Spiceworks Community

Hi Stephanie
Well the engineers came and checked the line and could not see any issue with it.
The replacement hub that I had used to narrow down the issue was then rebooted and wouldn't sync so they tried their test hub and that worked. I was asked to put my origonal hub back on, the one I had removed some weeks ago as part of trying to diagnose this fault, and that worked so before leaving I was told that they would:
- Send out a replacement hub just in case.
- Recommend a lift a shift or rebuild of software to Wholesale. Though they did state that Wholesale might not do this as they could find no fault.
About an hour later the hub rebooted and I had 5.2Mb sync rate, 4.5Mb throughput and a SN margin of 18/6. This is as fast as it as the line has ever been. I'm not sure what was done at the exchange as I didn't get an update.
Sadly later that night whilst wtching something on Vision the video stream stalled and I got the same issues again in that the SN margin went down to this time 18/4.0 with lots of errors/loss of input/signal. This morning the sync speed is down to about 4.2Mb and throughput 1.94Mb and the SN margin is 18/9.
So no further forward really.
So either I've got 2 faulty hubs..unlikely though I suppose possible
The DSLAM was not lift and shifted or the software rebuilt as no fault could be found.
If the lift and shift or rebuild hasn't been done then can this be progressed?
The only other thing is that my line is permanently in fast mode due to previous attempts by BT to resolve isssue with my Vision service when it was in Interleave mode. I suppose this could also be contributing to the issues?
I really do need this sorting and as I say I have another ADSL service in to the house and that is rock solid and sync's at over 5-6Mb.

Similar Messages

Yet another Adobe Flash Player zero-day discovered from the Hacking Team breach.

Thanks for the heads up Symantec Matt.

Aaaahhhh yes... remember when an entire day could by without news of a breach or hack or targeted attack? Yeah... neither do I.It will probably shock you all to hear that the Symantec Security Response team dropped a new blog over the weekend outlining a Zero-Day vulnerability in Adobe Flash player. Dig it:Second PoC Exploit for Adobe Flash Player Discovered After the Hackers-for-Hire Company Breach
Yet another Adobe Flash Player zero-day discovered from the Hacking Team breach.Symantec is aware of a second vulnerability (CVE-2015-5122) in Adobe Flash Player that’s associated withHacking Team, the Italian company which recently suffered a major data breach. The existence of the unpatched vulnerability has been confirmed by Adobein itssecurity bulletin.Symantec’s analysis has confirmed that the vulnerability can be successfully exploited...
This topic first appeared in the Spiceworks Community

Interview with David Vincenzetti, CEO of Hacking Team

Interview with Business InsiderNot as much in depth as I'd hoped it would be, but worth a look. I like how he skirts the question on if they disclose zero-day info to the vendors. "BI: As I understand it, finding hackable software flawsis core to your business, do you ever disclose any of the security vulnerabilities you find to vendors?DV: Zero day vulnerabilities are not core to Hacking Team’s business. The core is providing a system to law enforcement that allows surveillance in the digital space.Essential to that is a process of continuous updates to the software to assure that it can be operated securely. Zero day exploits are only one way in which clients may choose to deploy Hacking Team software."
This topic first appeared in the Spiceworks Community

SEOUL: Samsung Electronics is bringing forward the launch of a key premium smartphone model, a person familiar with the matter told Reuters, as the South Korean tech giant seeks to revive sales after a sluggish second quarter.The world's top smartphone maker will launch a new version of its Galaxy Note phablet in mid-August, the person said, declining to be identified due to the sensitivity of the matter. Previous versions, such as the Note 3 and 4, typically launched in September.A Samsung spokeswoman declined to comment.The mid-August launch will likely put the new Note smartphone model on the market ahead of arch-rival Apple's next iPhones. The US company is preparing for its largest initial production run for new phones so far by the end of the year, the Wall Street Journal reported earlier this week...Read More
Read More

Trying to get team planner to show more information

Is there any way to get team planner to show more information about the tasks? In calendar view, you can set the bars to display all sorts of information, but I can't seem to find the equivalent in Team planner. I want the bars to display, hours work and
one custom field, as well as the task name.
On this subject, I'm sure I must be missing something, but project seems to have missed the point of breaking tasks down into manageable sections. For example, I have a project, say 'Build house', summary tasks might be 'build conservatory', 'build kitchen'.
Each might have 'put in windows', the first task of which might be to get quotes. All that then appears in team planner, or any of the resource management views is the task name 'get quote', with no idea which summary task it belongs to. I have to write the
correct summary task in a custom field for each task, surely this can't be the best way to do it?

Hi,
The good news is that the resouce usage view has a field called Task Summary Name, so no need for a custom field.
The bad news is that yes, you cannot modify the Team Planner view.
Hope this helps,

I purchased the creative suitte for teams 4 days ago and still waiting the activation to download de package, on my account still appear a message saying (pending) And the payment was do correcty. I didn't receive any information about it.

I purchased the creative suitte for teams 4 days ago and still waiting the activation to download de package, on my account still appear a message saying (pending) And the payment was do correcty. I didn't receive any information about it.

Moving this discussion to the Creative Cloud forum.
360medlink if you are facing difficulties with your account then please contact our support team directly at Contact Customer Care.

I changed my LCD last day and now i noticed all my pictures on my phone are gone. I tried to restore the back that I got yesterday but it wont let me because its telling me there is not enough space on my phone!!!

I changed my LCD last day and now i noticed all my pictures on my phone are gone. I tried to restore the back that I got yesterday but it wont let me because its telling me there is not enough space on my phone!!! That's wierd because I didn't download any app or anything else since my last backup and on the other hand about 3000 pictures are gone, how come there is not enough space left! I also check my usage on my phone and it shows that i have about 7.0 GB pictures!!! BUT my photos is empty! I want my picture back on my phone any solution anyone?

Thanks for your reply!
I just called the guy who changed my LCD and asked him what happend, he said there were no pictures on your phone when you gave it to me! i know he is lying tho!
My apple warranty is over and I have to pay them to get some help over the phone!

My wifi is greyed out my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help.. :(

my wifi is greyed out ..my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help..

Hello Prakharfromindia,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Have a nice day,
Mario

HT5731 I bought a full season of a TV show. I downloaded all episodes. When I go into my iTunes library, select the episodes I get a message of: This computer is already associated with an Apple ID. I can't for the life of me get the TV show to play.

I bought a full season of a TV show. I downloaded all episodes, I went to my iTunes library, selected the episode I wanted to watch. I got this message: This computer is already associated with an Apple ID. I can't for the life of me get the TV shows to play. I went on iTunes and when to my purchases. Clicked on the episodes and the same message popped up. How do I get these to play? I also see my download box with an error message saying it has paused the download. I click unpause and it just pauses again. I have been able to get one of the episodes to play once through, but now it gives me the same message.

It's been months, so you may not care anymore, but you can't download songs from multiple Apple IDs over a 90 days period. Sorry, it's not allowed for legal reasons.

TS3274 My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
According to Fly150 in another discussion, this is a workaround - for the time being.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store.

HT201413 one day i loggged on and all it said was acssecing itunes store but never got there. then a message came up saying "could not connect to itunes server. check your connection and try again later". what should i do?

one day i loggged on and all it said was acssecing itunes store but never got there. then a message came up saying "could not connect to itunes server. check your connection and try again later". what should i do?

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Outlook 2010 duplicates mail with setting Leave mail on sever, Delete After n days and pressing Send/Receive All folders

The setting Leave mail on the server and Delete after n days and Pressing Send/Receive all folders causes outlook 2010 to duplicate all mails of the last n days over and over again.
If I leave outlook 2010 open this problem does not occur, mail will be retreived without a problem. If I leave Outlook 2010 open for a long time and then press Send/Receive all folders it does work ok. If I restart Outlook 2010 and then press Send/Receive
all folders the problem occurs.
The pst file is a new one. OTher mail accounts that do have Leave mail on the server but not Remove after n days do not have the duplicating behaviour.
I have manually removed 6400 duplicate mails, if Microsoft does not solve this urgent problem soon I need to remove Office 2010 from my computer and go back to Office 2007, Office 2007 worked fine for me.
Is there a solution fir this problem, or a free tool to remove all duplicates?

Dear Pieter,
I suggest creating a new Outlook profile, and create the problematic account in the new profile, to see if the problem occurs.
Here are the detailed steps on how to create a new profile to test this issue
==============
1.    Exit
Outlook.
2.    Go to
Start > Control Panel, click or double-click
Mail.
Mail appears in different Control Panel locations depending upon the version of the Microsoft Windows operating system, Control Panel view selected,
and whether a 32- or 64-bit operating system or version of Outlook is installed.
The easiest way to locate
Mail is to open Control Panel in Windows, and then in the
Search box at the top of window, type Mail. In
Control Panel for Windows XP, type Mail in the
Address box.
Note    The Mail icon appears after Outlook starts for the first time.
The title bar of the Mail Setup dialog box contains the name of the current profile. To select a different existing profile, click Show Profiles, select
the profile name, and then click Properties.
3.    Click
Show Profiles. Choose Prompt for a profile to be used.
4.    Click
Add.
5.    Type a name for the profile, and then click
OK. Please also follow the onscreen instructions to create the email account in this profile.
6.    Start
Outlook, and choose this new profile.
If this problem does not occur in the new Outlook profile, the old Outlook is corrupted. We can delete that and use a new Outlook profile.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Best Regards,
Sally Tang

Making sure website shows up perfectly in all browsers in html

How do I make sure my webpage shows up perfect in all web
browsers? I tested my page in Fire fox and one of the background
colours of a cell wouldn't show up and the colour of my cell's
borders wouldn't show. I tested my page in Opera and one the
pictures wouldn't show. It is perfect in I.E 6. What do i do
because I thought dreamweaver would take care of this.

<td class="logo style1" scope="col" colspan="2"
height="75"><p align="center"><img src="Mobile Phone
Compatability List.JPG" width="269" height="65" /></p>
</td>
</tr>
<tr>
<th scope="col"
width="63"><strong>Nokia</strong></th>
<td scope="col" width="454"><div
align="center"><strong>6131, 6136, 3250, 6233, 6234
</strong></div></td>
</tr>
<tr>
<th scope="row">Samsung</th>
<td><div class="style1" align="center">E900,
D900, D600, Z400, U600, s500i, E770 </div></td>
</tr>
<tr>
<th scope="row">Motorola</th>
<td class="style1"><div align="center">SLVR L7,
RAZR V3x, SLVR V8, V635, z500, A1000, E1000, E398, A840, A780,
V850, V710, V975, V980 </div></td>
</tr>
<tr>
<th scope="row" height="18">02</th>
<td class="style1"><div align="center">XDA, XDA,
Exec, XDA II, XDA IIi XDA IIs XDA Mini </div></td>
</tr>
<tr>
<th scope="row" height="19">Sanyo</th>
<td class="style1"><div align="center">s750,
s750I </div></td>
</tr>
<tr>
<th height="27" scope="row">i-mate</th>
<td class="style1"><div align="center">JAM,
JASJAR, PDA2, PDA2K </div></td>
</tr>
<tr>
<th scope="row">Orange</th>
<td class="style1"><div align="center">M1000,
M2000, M2500, M500, M5000, SPV, SPV E100, SPV E200, Treo 600, Treo
650 </div></td>
</tr>
<tr>
<th scope="row">SHARP</th>
<td class="style1"><div align="center">802, 902,
GX30, GX30i </div></td>
</tr>
<tr>
<th scope="row" height="23">
<p>LG</p></th>
<td class="style1"><div
align="center">u880</div></td>
</tr>
</tbody>
</table> </td>
<td width="373" height="100%
" align="center" valign="middle" bgcolor="#666666"><p
align="left"><img src="New-Front-Photo-small-file-size.jpg"
width="373" height="493" /><img
src="New-back-Photo-small-file-size.jpg" width="373" height="493"
/></p> </td>
</tr>
<tr>
<th height="406" align="left" valign="top"
bordercolor="#000000" bgcolor="#A4C2C2"
scope="row"> </th>
<td colspan="2" align="left" valign="top">
<p> </p>
<table width="751" height="186" border="1"
bordercolor="#999966">
<tbody>
<tr>
<td scope="col" colspan="2" height="42"><p
align="center"><img src="Specification.JPG" width="187"
height="24" /></p></td>
</tr>
<tr>
<th scope="col" width="107">Size</th>
<td scope="col" width="628"><div
align="center">2GB</div></td>
</tr>
<tr>
<th scope="row">Read Speed </th>
<td><div
align="center">5mb/s</div></td>
</tr>
<tr>
<th scope="row">Write Speed </th>
<td><div
align="center">1.5mb/s</div></td>
</tr>
<tr>
<th scope="row" height="23">Voltage</th>
<td><div align="center">2.7- 3.6v
</div></td>
</tr>
</tbody>
</table>
<p> </p>
<table width="751" border="1" bordercolor="#999966">
<tbody>
<tr>
<td scope="col" width="741"><div
align="center"><img src="Payment.JPG" width="98" height="23"
/></div></td>
</tr>
<tr>
<td scope="col"><div align="center">Payment is
accepted with paypal only.</div></td>
</tr>
<tr>
<td scope="col"><div align="center"><img
src="Shipping.JPG" width="100" height="21"
/></div></td>
</tr>
<tr>
<td scope="row"><div align="center">
<p>We post all items by royal mail first class to the
addresss specified by the buyer. Delivery takes 1-3 days.</p>
<p>We will post on the day of purchase if payment is
recieved before 5:45pm.</p>
</div></td>
</tr>
<tr>
<td scope="row" height="24"><div
align="center"><img src="Refund Policy.JPG" width="161"
height="22" /></div></td>
</tr>
<tr>
<td scope="row"><div align="center"><span
class="style7">If for any reason you want to return the product
as long as the item has not been opened you can mail it back to us
and we will give a full refund. Buyer pays postage.
</span></div></td>
</tr>
</tbody>
</table>
</td>
</tr>
</table>
</body>
</html>

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

Show in a Iview all documents of an user of the whole portal

Hello everybody,
I want to show in an Iview all documents of an user of the whole portal, not only the documents under his folder /userhome/Personal Documents
Any ideas?
Thanks in advance
Guillermo.

... and of course I have to add that this can be done with very few programming (but with that - with much more possibilities) by using a redirect "proxy iView", which is described in detail (and is taking just this scenario as one use case among others) on the slides of my TechEd presentation "Implementing Dynamic iView Properties", at least available for TechEd visitors now.
On the other hand, searching for "proxy iView" on SDN will return different results where at least I have described the basic idea.
Hope it helps, too,
Detlev

My 4s wa showing update to iso7 so I updated and it kept failing now its not showing an update at all and saying my iPhone 4S is up todate on USO 6.1.3 help???

My 4s wa showing update to iso7 so I updated and it kept failing now its not showing an update at all and saying my iPhone 4S is up todate on USO 6.1.3 help???

Now it's not showing any update on my phone Iv turne it off and bk on again but still saying software is up to date on 6.1.3

Hacking Team 0-Day Shows Widespread Dangers Of All Offense, No Defense

Similar Messages

Maybe you are looking for