Harman Kardon iSub 2000 - Power Supply pin points required

G'day
Can someone help me here, recently moved houses (separated from.. you know) and had limited time to get my things to here, I lost the power supply for the iSub here (kicking my guts as want use it as i love it!), I was wondering if someone could help me out with the pin out points so that I can make one please. And what was the output voltage again?
Thankyou once again.
Regards
AP

You might try a universal AC Adapter from Radio Shack. Radio Shack's AC Adapter has multiple interchangeable plug types & you can set the exact voltage via a switch on the power supply too. They're not too expensive either if that worries you.

Similar Messages

  • PowerPC 7500 Power Supply Pin Outs?

    Anyone got a link to page with the pin outs for a 7500 power supply?
    I have a 614-0039 and I need to test it.... not sure if the paper clip trick will work to start it.
    It's a 22-pin connector and no green wire!
    Thanks

    Anyone know how to test this power supply? It will not turn on.
    I have 5vdc on only one pin. I have no computer to test it in.

  • Harman Kardon iSub no longer supported. Any compatible sub-woofers around?

    Ah, pangs of new technology! If you're shopping for any third party device, make absolutely sure it will be supported by the Intel Core Duo. While the sound is solid from the internal speakers, I still would like a sub-woofer. None of the ads I've looked at specify Core Duo compatibility. Luckily, I'm holding on to my old iMac and Powerbook, which gleefully recognize my iSub.

    I have found a way to make our iSub work again on Intel Macs.
    But this can't be done using only the iSub with the internal speakers or the computer's audio line out port.
    If you use the iSub together with an external USB soundcard, and select the USB soundcard as the sound output, then the iSub volume control will show up and our lovely iSub will come alive again with the USB sound device attached.
    low freq. sound will come out from the iSub and high freq. sounds will come out from the USB sound card's line output.
    so you'll need the following:
    1) USB sound output device (eg. iMic)
    2) a pair of speaker connected to the USB sound output device's line out.
    this is what I use:
    1) Comodow USB 3D Sound Controller (PCC-PD552) - http://128star.com/catalog/images/PCC-PD552-GALLERY.gif
    2) Creatve SBS Vivid 60 Speaker - http://images.creative.com/iss/images/products/headers/prod11425hdr_1_61.jpg
    3) karman/kardon iSub USB (standalone version).
    again, hope Apple will fix this issue in the next 10.4.7 so we don't have to use our iSub with an external output device.
    Good Luck Everyone!
    Lok

  • Harman Kardon isub issues

    On my wk imac (g4, flat panel) I have a wierd isub problem...sometimes it'll just kick in really loud, sometimes not at all until I kick the sound up a hair, then all of a sudden it comes on. Sometimes nothing until I unplug the USB and plug it back in...it seems to kick start it then...any ideas??

    It has...sometimes, I'll be listening and then all of
    a sudden it'll really get loud. I plu it into the
    USB on the machine, not a hub, and it still doesn't
    make a difference. I have not been able to find
    anykind of driver or updates. :/
    yeah and certain programs will kill it also adjusting the volume seems like theres some kinda balance adjusting going on also in this bug

  • Harman Kardon Soundsticks not sounding with new iMac

    I have the original Harman Kardon Soundsticks, which have worked beautifully since the early 2000s, till this new iMac - they're not showing up as an output source in Sound Preference.  I've contacted both Applecare Support - no idea - and Harman Kardon - Apple isn't supplying the drivers anymore.  The thing is, they played just fine with the older iMac just replaced, which was running MacOS 10.7.2.  Drivers are software, right?  Were they just dropped from the OS with this last update, or is there a hardware issue?  The older iMac was a 24", Intel, that I bought in April, 2007.
    Anyway, this is very disappointing since the Soundsticks have excellent sound and still work.
    Is there a way to get the drivers, or is there also a hardware component?
    Thanks!

    Ok, here's what happened in the end.  As I was dismantling the Soundsticks system from my computer and desk area, I discovered that the plug going into the Harmon Kardon power block from the electrical plug was loose.  Aha !!!!  I realized - loose plug!  Let's try again.  And, I did, after ensuring that all other plugs were also snug in their sockets.  And, yes, the Soundsticks have been doing just fine ever since : )
    Ok, re. plugs.  There's a cord that runs from the subwoofer to the power block, and it's solid.  Then on the other end of the block is a cable that plugs into the block on one end and the wall on the other.  It was the plug into the block that was lose, and I didn't realize it ' cause it was under the desk, nor did I recall that it could separate from the block.
    I was so thankful that the solution ended up being so simple!  . . . and so glad to be able to continue to use that sound system.

  • Xserve G5 power supply ? problem

    Well I bought a dead G5 Xserve on eBay (yeah, I know). followed the "system completely dead…" check in the Xserve repair PDF. Battery was dead, replaced that and reset PMU, nothing. Checked for voltage across the power supply pins. The only reasonable way I could find to do this with the power supply installed was to remove the bracket that holds the retaining thumbscrew, this exposes the solder joints for the pins on top of the connector. Checked for voltage across pins 1 and 8 and came up with zero. Bought a used "working" power supply on eBay and installed that along with a new battery, reset the PMU, checked for voltage at my power cord, plugged it in and pushed the start button. Fans came on lights blinking away as there was no RAM installed. Shut it down. Boughtt a couple of gigs of RAM and installed that along with a video card from a B & W G3 yosemite tower that was confirmed by a couple of sources as a cheap way to get video out. All of this installing and removing following ESD precautions. Pushed the start button…nothing. Removed both the RAM and the card…nothing. Checked for voltage at those pins—nothing. Bought a new in box Apple repair kit with a power supply, fan array and PCI fan. Installed all three of those with a fresh battery, reset PMU, pushed the start button…wait for it…nothing. Checked the power supply pins, zip for voltage. These parts looked to be brand new, free of any dust or signs of human meddling. Now even if every other part of this machine was trash, I should still get some trickle power out of a good power supply—yes? Am I really missing the boat here? I have checked the front panel connections and that the button actually presses the switch. Checked the connectoion from the MLB to the interconnect board and they are all clean, sound connections. This thing is in imaculate condition, no corrosion of any kind on the logic board or anywhere else. It is the revised MLB with the 2Gig RAM printed on it. Any ideas would be greatly appreciated.
    Thanks,
    Ted

    William,
    Straight from Apple's web site...
    http://www.apple.com/support/imac/repairextensionprogram/
    Which iMac G5 computers are affected by the iMac G5 Repair Extension Program for Video and Power Issues?
    The program is available for certain iMac G5 models that were sold between approximately September 2004 and June 2005 featuring 17- and 20-inch displays with 1.6GHz and 1.8GHz G5 processors.
    Steve

  • Power supply for AGP graphics - 20 pin vs 22 pin?

    So, the power supply on my G4 Sawtooth (dual 450) is about half dead. I looked online, figured out which part I needed, and actually found one on Ebay. It was kinda easy. Then I took it to my Aunt's house (she's a tech) to install, and lo and behold... I have a 22 pin connector on my motherboard. The power supply (that everything online pointed to as the correct part) is a 20 pin. So of course, that isn't going to work.
    I checked out everything again last night and all over the place I see that the Sawtooth has a 20 pin connector. Mine is 22, I swear... what in the ****??? Why the discrepancy? And does anyone need a 237W power supply?
    Thanks,
    Brooke
    12" PB 867, G4 Sawtooth D450, Indigo iBook   Mac OS X (10.4.6)  

    Gigabit G4, Digital Audio, Quicksilver and later Macs have a different power supply and motherboard that passes 28 Volts DC from the power supply to a connector for the ADC port graphics card. 28 VDC is passed to the Graphics card ADC port to power Apple's ADC monitors.)
    If you are not using a ADC monitor, you might could cut off the connector from your existing supply & the purchased supply & connect the 22-pin connector to the purchased supply.
    Here's some links of power supply sellers.
    We Love Macs http://www.welovemacs.com/apposu.html
    HardCoreMac http://store.yahoo.com/hardcoremac/powersupplies.html
    Not sure if the Apple Part #s are marked on your existing supply & purchased supply, but the links have the Apple Part#s for the various Mac models.
    Cheers, Tom

  • 4 pin power supply

    hello folks I am wondering what and why some mb's have the small 4 pin power supply for the cpu and others don't. I have two machines I have put together and one does and the other don't. Can't find the correct literature to satisfy my curiosity. please offer some insight.
    Thanks Paul

    the msi nforce 2 powers the cpu of 12v and so has the 2x extra 12v feeds,and 2x earths
    as the 20 pin plug has only 1x 12v feed
    and 8a is the most load an atx lead should ever have
    and as 8a is about a cpu load and the 12v does other jobs on the board they are needed
    older boards ,and boards like the assus nforce 2 still use the 5v rail for the cpu
    so dont need nor have it

  • HT4623 I selected the latest update to OS 7 and it seems to have stuck.  I have an image of the power supply with an arrow pointing to iTunes on my screen.  I do not know how to move from that point.  Never have seen it before.  Anyone help?

    I am trying to upgrade to lastest release.  It seems to have stuck because I have an image of he power supply plug with an arrow pointing to the iTunes on the screen.  I have never seen this and want to reboot or restart or something.  Anyone help?

    I have this very same problem, have you gotten any thing to help? I hit update on the iPad and then it froze...rebooted and got the screen you described.
    "I am trying to upgrade to lastest release.  It seems to have stuck because I have an image of he power supply plug with an arrow pointing to the iTunes on the screen.  I have never seen this and want to reboot or restart or something.  Anyone help?"
    Message was edited by: rfdeaton

  • Pin Layout HP Power Supply HSTN PD05 P/N 379123 ?

    Hi Folks, I want to use the HP power supply HSTN -PD05 P/N 379123-001as a "of board" 220V power supply to drive a 12 Volt Car-Radio plus Amplifier & Subwoofer System. Can s.o. here send me a Pin Layout of the PS or even send me some examples (layout,photos....) how to use the PS out of the computer/server as a 12 Volt or 5 Volt PS including the switch on/off Pin- Layout. May be also how to modify to (re)load a 120 Ah 12 V Car Battery. XanksEd

    Hi Dave, I can't plug it into a rack. In order to turn it on, out of a backplane/rack -connection, I need to shortcut the power on funktion. This meeans I need to know the PIN-Layout of PS. (at least the Power on pins o the connector) Where do I get this Information from? regards Ed

  • Laptop power supply "Smart Pin" ?

    Hi All,
    I'm an electronic hobbyist and wanted to use a surplus HP laptop power supply as a power source
    for my experiments.  It is a large 'brick' rated at 18.5VDC @ 6.5AMPS, I think (sorry I'm at
    work).  When  I cut off the DC plug I was surprised to find a COAX type cable with 2 shields and
    a center conductor.  After a little surfing I 'assumed' that the third wire is the center
    conductor, or the smart pin.  Cannot seem to find how the "smart pin" works.  Anyone know of a
    link as to how this works so I can be "smart" about using this power supply?  All I'm looking
    for is some nice, regulated DC.
    Buy the way, I own 3 HP laptops and administer hundreds of HP servers at work.  Wouldn't buy
    anything else!
    Thanks...

    Hello friend, ignore those websites just cut your hp charger, u will see 3 wires which are the first layer, second and third. Cut off the third layer to prevent shunting cause it almost damage my laptop. Connect your positive to the second layer and negative to the first layer and that solves the problem. Can also be used on dell laptop chargers too. Tested and confirmed. Don't forget to cut of the third layer first. Kudos

  • Is my power supply enough for an athlon xp 2000+?

    Hi, I have a TurboLink 350W powersupply, it came with my case, AND I'D LIKE TO KEEP IT
    I have a Athlon 1.1ghz rite now, and i want to upgrade to an Athlon XP 2000+, and i was wondering, my power supply should be enough for that, right??
    +3.3/24A
    +5/35A
    +12/12A
    im not sure about the +12, but look at Dell.  My dad has a 4600 w/P4 2.4 + Sapphire Radeon 9800 PRO, and dell only ships with 250W power supplies!! and P4's use more power than Athlon Xp's, and i dont have a radeon...i have a FX5200.  My dad even has SATA, so....i think my 350 is fine, but i dont want to pull my hair out [STRIKEOUT]if[/STRIKEOUT] my athlon doesnt work and i think its the motherboard or something, when its the P.S...., so.

    Quote
    3. My Dad has a Dell Dimension 4600 w/250W Power Supply
    I'll tell you how that is powered with that crappy PSU.
    1. Dell sells computers.
    2. They have an average 1 year warrentty.
    3. When they quit, see No. 1
    A few years back, my mother bought an E-Machine (AKA: the green E of death) that came with a 185W PSU. The PSU has already gone out once, and due to the way it mounts, there was nothing more powerful that would fit in that case, so I replaced the crappy PSU with another crappy ($20) 185W PSU. Next time the PSU fails, I'll pull the drives, and toss the case/mobo, and start over.
    As for Antec PSU's, well, look at my sig, you will notice I have a 300W Antec. While it is rather weak, the KT266A/KM266 chipset boards and eariler, generally do not power everything except memory from the 12V rail.
    While other manufacturers still use the 3.3V and 5V rail to power most of the board, the 12V rail will soon be the most used rail on almost all motherboards.

  • A88XI AC JPWR2 - power supply has no 4 pin connector

    I am building a system with an AX88I AC and have just noticed that my power supply does not have a 4 pin connector that fits the JPWR2 plug. Is JPWR2 optional, perhaps (I am not using the PCI slot) or do I have to get an adapter or a different power supply?
    [later] OK, forget it. I just found that there is an 8 pin connector that splits into two four pin connectors. I would delete this post if there was a delete button.

    Quote from: mark on 16-May-15, 23:46:14
    [later] OK, forget it. I just found that there is an 8 pin connector that splits into two four pin connectors.
    Correct. Most modern power supplies split into 2x4 pins
    Looking at the manual of products you have(PSU+motherboard in this case), does not hurt, just so you know 

  • NX6800GT-T2D256E, Power supply and 6-pin connector

    My NX6800GT-T2D256E came with a power adapter: 2x 4-pin Molex to a 6-pin connector that goes into the VGA-Card.
    I've noticed that I have an identical 6-pin connector directly on my power supply (a Cieftec GPS-400AA-101A)
    According to the power supply's manual, it is a PCI power connector, seemingly for powering PCI-express VGA cards.
    Of course I want to use that connector, as it seems to be the ideal way of powering the card, but first I compared the pin configuration to make sure it is the same thing - and found a slight difference.
    On the Adapter supplied with the card, 1 of the pins is empty (not connected) while on the connector from my power supply it is connected to +12V
    Basically the pin configuration looks like this:
     1 4
     2 5
     3 6
    On the adapter supplied with the card they are:
    1:  +12V
    2:  NOT CONNECTED
    3:  +12V
    4:  Ground
    5:  Ground
    6:  Ground
    On the power supply they are:
    1:  +12V
    2:  +12V
    3:  +12V
    4:  Ground
    5:  Ground
    6:  Ground
    Can I safely use the connector from my power supply or could the additional +12V damage my VGA card?

    Your PC has a standard ATX power supply and physical sizes will vary slightly.  You might want to measure the dimensions of your power supply.  Normally the standard ATX PSU will measure 5.9" by 5.5" by 3.4".  You don't want to get too far away from the dimensions of your PSU since the HP mini-tower cabinets are very tight inside.  I prefer the modular model PSUs to help with excess cabling issues.  www.newegg.com has many good brands.  Not all PSUs are created equal.  Look at the warranty period, amperage on the 12+ volt bus, specification level, i7 support, efficiency rating etc..
    OCZ, Enermax, Corsair and Rosewill are all good brands as is Thermaltake. 
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Can I install a G3 Blue & White power supply unit in a G4 AGP?

    I have a G3 and a G4. The G4s power supply unit (PSU) short circuited a while back and I got a G3 as a replacement. I've tried to find a replacement power supply unit for the G4 and have been using the G3 in its place. Sometimes they appear on ebay but I usually lose the auction. But the G3 has upgrade issues that involve spending money on it. It's a Blue and White 300 MHz Yosemite while the G4 is the Graphite AGP 400MHz Sawtooth. RAM isn't an issue, processing speed is, the G3 is harder to upgrade. Plus I can put up to 3 hard drives in the G4. 2 ATAs and a SCSI. the G3 only holds 1 ATA hard drive. With 2 SCSI bays.
    Anyway I'm leaning towrds retiring the G3 and rebuilding the G4 starting with the PSU. And I've seen on auction sites that these units are compatible with both Macs, the Blue and White G3 and the AGP and PCI G4. It is essentially the same 240 watt unit made by Delta Electronics or ATX..
    However as I spent part of the yesterday dismantleing and cleaning dust out the Sawtooth's innards, and removing the broken PSU, I also noticed on the G3 that the PSUs cables are slightly different. There is one cable that is connected to the start button. On the G4 this isn't the set up. The start button's cable is linked directly to the motherboard.
    To get to the point. Is this cable arrangement a potential problem that I should avoid by not tinkering with it? Or can I ignore this and install the G3 PSU in my G4? I'm preceding with caution and will check back here later in the day.
    Thanks.
    G3 B&W 300MHz 6GB 512MB + iMac G3 400MHz 10GB 320MB   Mac OS X (10.3.9)  

    Thanks, Grant
    Interesting opinion.. and funny too.
    On close inpsection of the fron panel you're right the cable is a hard drive cable, and without a number. Whereas the connector for the DVD and Zip drive are numbered P7 and P6.
    And in the G4 there is a slot for where this old connector went, but there's nothing to connect, no pins. It's as if this slot was evolutionary rump on its spine end where the tail ended, that the G4 designers left in or else they used left over parts from the G3 to save money.. This early G4, introduced in 1999-2000 is one evolutionary step above the G3 which was discontinued in early 1999. The G4 front panel has a slim grey ribbon cable leading under the chassis directly to the motherboard, along witha thin wire and small pin connector leading from the speaker.
    There's nothing like a beakdown to learn how to rebuild your PowerMac. And I think most of the repairs are DIY doable. It just takes a few good screwdrivers, a little know how, some patience and a lot of spare time. All that and the correct replacement parts, if you can find them.
    So I've finished installing the G3 PSU in the G4. It fits perfectly in and amazingly all the cables were long enough, including the cable to the ATA hard drive bay P2 and P3. Hard drive is connected, RAM installed, ready to go. All I have to do is plug the power cable into a power strip socket and hope for the familiar whirr and chime and breatha sigh of relief. If nothing happens then it prolly means the motherboard is kaputt. Or that it isn't compatible with the G4 architecture and it's back in the G3. I'll let the board know what's happened tomorrow. I'm off to Slumberland. ZZZZZzzzzz. rob
    G3 B&W 300MHz 6GB 512MB + iMac G3 400MHz 10GB 320MB   Mac OS X (10.3.9)  

Maybe you are looking for