Have iMac mid 2007 using Mavericks . . . will not function with new 2nd display?

Sys Prefs setup with 2nd display using Mavericks . . . the new functions of Mav won't come in with LG display even though same display works with my other Macs. Any like experiences or advise would be more than appreciated? bumdiago

Shawn:
One thing that caused the refresh to stop working is when you have error or bad settings in your report. Expand your upper right control panel or EVDRE area and see if everything is good. For instance, an EVDRE usually gives an error message rather than displaying (EVDRE OK) at upper right.
Also, did your input template refresh the data properly every time after you sent your data? If so, you may convert your input template to a report, and see if that will solve your problem.
Hope my 2 cents helps...
Brian

Similar Messages

My old iMac and OS 10.4 will not accept the New iTunes Version 10 application and I can't get past the screen offering to download iTunes 10. This is wrong and I need help getting past this situation. Help!

My old iMac and OS 10.4 will not accept the New iTunes Version 10 application and I can't get past the screen offering to download iTunes 10. This is wrong and I need help getting past this situation. Help!

Sure, you can get around it if you don't need the newest version of iTunes. I still use version 7.5 because the newer versions didn't strike me as offering anything I needed.
If you do need a version 10-something then you will have to upgrade your operating system to Leopard (fi your computer will support it) at least. If you need 10.5 for some reason then there's no getting around it, you will have to buy a new computer.

My ipod 5.1.1 (9B206) will not sync with new Itunes version 12.0.1.26. Can anyone help

My ipod touch 3rd generation OS 5.1.1 (9B206) will not sync with new Itunes version 12.0.1.26. Can anyone help

What exactly happens when you try to sync?
Does iTunes see the iPod?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
If so have you done anything like update iTunes on the computer since it last successfully synced?
Do the songs play in iTunes?
Does any media now sync to the iPod?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod
If iTunes does not see the iPod:
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

I forgot my password and ipod will not sync with new computer

I forgot my password and ipod will not sync with new computer

You'll need to connect the iPod Touch to your iTunes library in recovery mode and restore it factory settings. There is no other way.
Here are instructions for getting your iPod touch into recovery mode.
http://support.apple.com/kb/ht1808
B-rock

Will not charge with new cable

I have an iPod classic 5th gen and it will not charge with any newer cables. Either apple or aftermarket. I have found it will charge when I hook up my Kensington battery pack and it charged with an older cable but I no longer have it. It's their something different about older units and charging accessories?

There is no difference. They are exactly the same. So it doesn't charge whether you plug it into an available USB port on your Mac or via a wall adapter?
Have you check to make sure the iPod's dock connector port was clean and clear of any sort of debris and/or damage such as bent, broken, or corroded pins?
B-rock

Mid 2007 Macbook Pro will not boot from windows 7 DVD

I'm trying to install Windows 7 64 bit on to my mid 2007 MBP. The DVD is valid, boots on a PC and I was able to load WIndows 7 into a VMWare fusion virtual machine on the very same system. I am convinced from those actions I have a good DVD and a good DVD drive.
What happens is the screen goes black and "1. 2. and Choose type of DVD boot:" appear. ( I may have the phrase slightly wrong) No matter what I type nothing happens. I've gone into the boot selecter and same thing happens if I select the DVD.

so you did not burn the DVD from ISO? that is what this usually is.
the error and yours being 2007 says you are trying 64-bit and your Mac does not support 64-bit versions it has 32-bit ROM (and likely cannot upgrade past Lion when 10.8 Mountain Lion comes out).
Windows 64 Bit Unsupported Macs
What you are seeing is an EFI boot menu "select CD 1 or 2" yes.
Select CD-ROM Boot Error Apple
CD-ROM Boot Type when installing
Install Windows 7 x64 Mac Select CD-ROM Boot Type

EYETV LITE WILL NOT STARTUP WITH NEW MAVERICK INSTALL

eye lite will not start up with new maverick installed untill you unpluge usb then reinstall.

Well, I download the driver for Windows 8.1 64 bit, it appears to down load then says extracting and the bar goes along to 100% then nothing. There is no option to install the printer wirelessly, the printer does not appear in the devices and printers, the Scan Doctor tries to fix the problem and just says need to install the wireless facility by using the manual when I select the wireless option. As I said, I can plug in USB and use printer fine but what is the point of having wireless if it doesn't work? Printer worked fine when installed on Home Hub 2. Got a new lap top and still no problems. Problems started when had to have new Home Hub as the broadband connection kept dropping out. BT sent HH3 as don't do HH2 any more. Realised that the printer was still holding the details of the old hub but couldn't find a way of changing this. Reset printer to factory wireless settings so not holding these now. Cannot use CD to load printer as doen't work with Windows 8.

???need to link 2 adobe ID's that belong to the same person. have over 100 books from old adobe id that will not open with new id??? jan

????i have an old and a new adobe ID and a new one. need to link them . i have over 100 books from old id that will not open now on my ereader.
please help

Hello,
Yes this is possible.
You can join both the adobe id's at: https://adeactivate.adobe.com/adept/en/JoinAccountLoginForm.jsp
Thanks

Cannot set up an alias on iCloud? have followed the instructions. It will not allow my new alias name which fits inbetween the specified no of characters?

I am having problems creating a new alias in my iCloud.
I have followed the instructions to the letter.
It does not accept my new alias name which fits in the prerequisite number of characters?

Post in the iCloud forum area.

IPod Classic 5th generation will not sync with new MacBook

I have had a 5th generation iPod classic that I have been super happy with. I have used it with several PC laptops. Because I have gone through so many PC's, I decdied this year to get a new MacBook Pro. Since my old PC was dying it took forever to get all my music and videos transferred to my new MacBook. Anyhow, I have had no luck syncing my iPod with my new MacBook. I have read several other posts (but mostly older like 2007-2010) that others have had similar problems. Here is a quick list of what I have done/what has happened:
Initially, I would get one of two messages:
'The ipod '(My Name) ipod' cannot be synced. An unknown error occurred (-124)'
- 'The ipod '(My Name) ipod' cannot be synced. The required folder cannot be found.'
Two times it told me I needed to use a USB 2.0 port (but I have a new MacBook and was using the newer 3.0 port). I haven't seen that message since.
It actually "transferred" over 4500 of my 7000 items (I have a ton of music that I use for my job) and then just stopped. When it was disconnected only about 200 songs were actually on my iPod.
I've restored it several times.
Seems to "freeze" on random songs or videos and will not continue to sync, even theough the iPod says it's syncing. Then iTunes freezes. I have to "force quit." Sometimes (but not all the time) if I try to re-open iTunes, I get a message that says iTunes is locked.
I thought maybe my cable was bad (it was the original that came with the iPod). I actually spent $20 and got a new one. No luck.
With the new cord iTunes now gets frozen on the 3rd or 4th song it is trying to transfer. Once I disconnect the iPod (I have to disconnect with ejecting because iTunes is frozen and it also freezes up Finder to eject) my iPod makes an awful click sound and I have to start it by toggling and then holding the play/pause button.
I have tried enabling disk, manually controlling music, etc. but nothing helps.
I am sick about it because I rely on my iPod a lot for my job-- and I can't afford a new one since I just bought a MacBook. I think it has something to do with the fact that I got this new MacBook. My old PC was getting so sensitive that I didn't download the latest version of iTunes (but I still had the second latest version).
Any help is appreciated.

Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
I assumed that you have tried the other USB 2.0 port to no success..
Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
Have a nice day!

IPod will not sync with new laptop

Alright everybody, got a tough one here I can't seem to figure out. I have a 3rd generation iPod touch. I had it synced with my now secondary desktop that has my library and everything on it. I am now trying to get my iPod switched over fully to my new primary laptop. I am running iTunes 10.5 and iOS5. The iPod will sync fine with the desktop but when I try and sync and erase with my laptop absolutely no music will transfer over. I can click the device tab on the left and look at music and they are all grayed out as if they are ghost files. Does anybody have any suggestions? For the record I have tried to restore the iPod and set it up as a new iPod on the laptop but the music files still will not sync. I can go back and plug it in to my desktop and everything syncs fine. Thanks in advance.

Is your new computer authorized with the same account? About iTunes Store authorization and deauthorization
Did you try to transfer purchases and back up manually before your sync?
Connecting to a new computer will erase your device during the first sync. But you can use the manual backup to restore from afterwards. Make sure to have at least onwe contact and event listed on that computer as well, syncing to an empty address book will delete contacts and calendars on the ipod.
Also check your restrictions, to make sure app installation is allowed.

Windows 8 will not activate with new SSD (second) hard drive

I added a new SSD drive in the second hard drive bay. I used the HP restoration media to install Windows 8 on the new SSD drive. Windows 8 will not activate. After spending 90 minutes on the phone with HP support (and paying $150), they told me to contact Microsoft. After spending some time with Microsoft, they told me that the Windows product key is being locked by HP, and there is nothing they can do.

Hi badgerbuzz,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

HotSync will not start with new Tungsten E2

I'm upgrading my old Tungsten T2 device with an E2. Following the upgrade instructions, I set up the E2 last night and let it charge overnight, then this evening did a final HotSync with the T2, and ran the installation program on the CD that came with the E2. At the point where the installer asks me to press the HotSync button on the USB cable I did so, and Windows popped up the notice in the system tray that a new USB device and that the Palm Handheld device was ready for use. After that, nothing. A minute or two later the E2 times out and tells me that "The connection between your device and the desktop could not be established. Please check your setup and try again."
I've tried re-installing the software, upgrading to Palm Desktop 6.2 from the web site,and restarting the computer several times, but I can never get the HotSync manager to respond to the E2.
By contrast, the HotSync manager will still synchronize with my old T2.
Post relates to: Tungsten E2
This question was solved.
View Solution.

Palm Desktop is running on Windows XP. I have been using version 4.1.0 which came with my T2. For the E2 I've tried versions 4.1.0, 4.1.4e, and 6.2.
I should point out that Windows XP in turn is running in VMware Workstation 6.5, on a Fedora 10 (Linux 2.6.27.12-170.2.5.fc10) host. Last Sunday I tried booting Windows XP natively (which was a royal pain, since I have to switch hard drives to do so), installing Palm Desktop 6.2 there, and hotsyncing. That configuration worked, as far as the device being able to connect to the PC.
Unfortunately it only synced my to-do list and a few 3rd-party programs; it lost all of my memos, contacts, calendar events, and photos. But that's another topic.

Z10 will not charge & with new Battery will not turn on

I have have had my Z10 about a month now, I am gernerally happy with it as a work phone which is similar to my private Iphone5. Unfortunately the Battry life has been reducing on a weekly basis to around 4 hrs between charges. Now it is dead and will not wake up, so I bought a new Battery, now it blinks once the three times but will not turn on.
Any ideas ? The OS is the latest on the Blackberry site, but as I can turn the phone on I can't be more specific.

Hello,
From your description, if your charger is "known good" (e.g., it can charge other devices), then one can only deduce that something (hardware) inside the BB related to passing power from the charger to the battery has broken. Or that something passing power from the battery to the device has broken.
Regardless, if your charger is 100% fine, then it sounds like a hardware problem for which no amount of OS/software level fixes nor internet-distance diagnostics can be of much value.
I recommend you seek formal support via your official warranty channel. Normally, that starts with your original place of purchase or an authorized service center -- it varies by region.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Degraded array will not rebuild with new disk

what do I need to do, inserting new disk doesn't start the rebuild
I have tried everthing that I know to do from raid admin 1.5.1
thanks

Justinian, Hello and welcome to the Apple Boards,
A couple of tips on using the boards:
1) Start a new topic rather than resurrecting an old one. This will help to bring your post to a fresh set of eyes rather than digging up an old topic that people feel they have already read. It will also give you the capability to mark it as "solved" because it is your topic not someone else's.
2) Start your post with what your set-up is and what you have already tried. This is will keep people from suggesting things you've already done or asking questions about your set-up like "What kind of RAID is it?"
So assuming you have an RAID 5 set-up did you lose a drive? And you pulled the drive, replaced that drive and made sure the drive was available in RAID Admin but it didn't rebuild automatically?
Was the drive an exact replacement from Apple? It's not one byte smaller than the others or something goofy like? The drive's SMART status shows up as OK?
About calling AppleCare - are you calling the number on the front of your the contract you received back from Apple or are just calling the general help number? I've only ever used the number I was given when I enrolled our Xserves and Xserve RAIDs and I have never had to hold when I've called.
=Tod

Have iMac mid 2007 using Mavericks . . . will not function with new 2nd display?

Similar Messages

Maybe you are looking for