Having authentication issue when trying to add a subscription to an internal billing account

I am trying to add a subscription to an account on the Azure Internal Billing Registration page.  But I am hitting an authentication error. How do I get someone to contact me so that I can get this solved?

Hi,
This issue is out of my scope, if you have any problems or questions about using Azure Internal Billing Registration or need help with a registration issue, please try to contact with the support: http://aka.ms/azdesk
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • Captivate 5 freezing issue when trying to add closed captions to video

    Hi There --
    I'm trying to add closed captions to a video (.f4v) I inserted as "Slide Video" on a slide in an Adobe Captivate 5 presentation.  I click on the video to select it, go to the properties panel, select "edit video timing" and then click on the closed captions panel to try and add captions and then Captivate completely freezes and locks up so not only can I not add captions to the video, but I have to use Windows task manager to shut it down.
    I've seen this process demonstrated in a Lynda.com tutorial, and the instructor didn't seem to have this issue with Captivate 5.
    Any thoughts?  Have other users found a work around at all?  I mean, I know I could strip the audio from the video, and then attach it to the slide and do closed captions that way, but it would be way easier (and make a lot more sense) to add it directly to the video, especially since that's what you are supposed to be able to do.
    I'm using Captivate 5 on Windows 7.  I also have Captivate 5 on a personal Macintosh and haven't tried yet to see if the issue occurs on that platform as well.  Has anyone else run into this issue?  Sorry for the length -- this is my first forum posting, so I'm trying to provide as much info as possible.

    Hi Dan,
    Welcome to Adobe Captivate Forums.
    You can try to add the closed captions to Video after deleting the preferences.
    Follow these steps to delete the preferences
    1.  Close Captivate if its launched already
    2. Navigate to C:\Users\<userName>\AppData\Local\Adobe
    3. Locate a folder named "Captivate 5"
    4. Delete the folder
    5. Now Launch Captivate and try your workflow
    Let us know if this solved the issue .
    -Ashwin Bharghav B
    Adobe Captivate Team

  • Having an issue when trying too back up my phone too my desktop gives me an error message saying the sync session failed

    recieiving an error message when trying too back up my iphone too my desktop
    the sync session failed

    Hi Shawn,
    Welcome to Apple Support Communities!
    The article below provides tips that should be able to help you resolve the backup issue.
    iOS: If you can't back up or restore from a backup in iTunes
    http://support.apple.com/kb/ts2529
    -Jason

  • I'm having 'Trust' issues when trying to connect our iPads to our PC's.

    Our teachers have been taking photos on our iPads. In the past they were able to connect via USB, click ‘trust’ and download them onto our PC’s. Suddenly this is not happening anymore. The PC recognises the iPad, we click ‘trust’, you find the iPad on the list of drives, click to download photos and it disconnects and asks if we trust the computer again. This reoccurs until we eventually give up. It's becoming rather frustrating.
    I have tried the old 'download the lastest drivers' etc.
    We have iPad Minis running 7.1
    Anyone suggest a fix?

    Hello Slemarinel,
    It sounds like you are having issues connecting your iPads to a computer to import pictures from it. I would use the troubleshooting from the following article to help troubleshoot the issue named:
    iOS: Troubleshooting USB-related alerts when syncing
    http://support.apple.com/kb/TS5254
    Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
    Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
    If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead.
    Close any virtualization apps (such as Parallels or VMWare).
    These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
    Restart your computer.
    Restart your iPad, iPhone, or iPod touch.
    If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
    Update to the latest version of iTunes if you have not already.
    Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device.
    The USB chipset on some non-Apple computers may interfere with syncing.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • We are having sync issues when trying to use separate user accounts and Apple ID's on the same iMac. What can we do?

    My wife and I share an iMac and we each sync to it using separate user accounts and separate Apple IDs. She has an iPad 2 and I have an iPhone 4. We upgraded the mac to Lion and the iphone to OS 5. Now itunes only recognizes my apple id no matter which user is logged in. Now if I download the Home Depot app to my phone it automatically gets pushed to my wife's iPad, which she does not want. We want to keep things separate. How can we do this?

    You can sync devices with the same iCloud ID, not seperate ones.
    If she has a different login on your Mac, make sure she has her own ID defined in System Prefs > iCloud

  • Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements after Mac upgrade to Yosemite 10.10 on iMac

    Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements 12 after the Mac upgrade to OS X Yosemite 10.10 on iMac. I have had a number of issues with software and things after upgrading to OS X Yosemite 10.10 and even 10.10.1.  I have uninstalled and reinstalled both PSE 12 and Premier Elements 12 a number of times and everything goes fine until its ready to launch and then you get an error message. Numerous uninstalled and reinstalls don't removing the problem.  Strangely enough  PSE 11 still appears to boot up and I never owned Premier Elements 11 so I don't know if it will start. I thought with Apple dropping its Apeture software and greater integration of iPhoto and Apeture files into Lightroom 5.7 all would be harmonious between these two players. Im not sure where Adobe wants us to go it recently removed the plugin to allow you to update files from LR to Adobe Revel, whats up with that. I now own two version of Adobe software that no longer work with my Mac and now way of uploading pictures from Lightroom to Revel. Needless to say I am pretty reluctant to sign on to a subscription of Creative Cloud with long term financial obligations when I can't even get my current Adobe software to work independently much less integrate with Lightroom. Frustrated with it all!

    Get rid of 'put disks to sleep when possible' and you may see a dramatic improvement (not necessarily a cure).
    That specific problem is a multiple-Processor (including graphics processor) problem, where one of the processors lost track of whether it should be responding to interrupts. You may have a Hardware problem.

  • ITunes song list is blank in iPhoto (when trying to add a song to s slideshow). No issues with iMovie. Any idea? Cheers

    iTunes song list is blank in iPhoto (when trying to add a song to s slideshow). No issues with iMovie. Any idea? Cheers

    Even though no one replied, i fixed my problem.
    Don't know if it will work for anyone else with similar problem
    but all I did was a CHKDSK then a defragment of my laptop and now everything seems to be working fine.

  • I continue to get an error message when trying to add Header

    I continue to get an error message when trying to add Header & Footer.  Therefore I am unable to add page numbers to my pdf.  Help!!

    Sounds like the PDF has an issue. You can try to save it, close, and reopen to see if that fixes it. If there are no tags or other markup, you could print it to a new PDF and try on the new file.

  • I am getting an error when trying to add a caption.

    I get the following error when trying to add a caption to a photo.   "An error occurred while reading files or writing files to disc.  The disc may be full or there may be a problem with the source media."    I am running Windows 7 Pro.   The files are located on my c:.   The drive has 274 GB Free so space isn't an issue.   I have tried deleting a file and readding it to the same catalog and still the same problem.   I have copied the file to the desktop and cataloged it from there and the error went away.  
    If i check on the folder attibutes it is set to read-only but the desktop folder is as well.   If i try to remove the read only it only resets itelf to read only again.   Once i get the error another file shows up with the image name plus -edTM P-1 and it has the caption on it.  

    I was able to get it to work.  The root folder which held the pictures had a lock on it through windows 7.   Even though the drive was shared, I still had to go into the folder properties and share it with everyone.   Once i got the lock off and rebooted I was able to add captions again.

  • Issue when trying to upgrade FB 4.7 to AIRDSK 3.6

    Hi,
    I'm desperately trying to upgrade FB 4.7 to AIRSDK 3.6 since 3 weeks.
    I've followed the various solutions found on forums and the various processes displayed by the "helpx.adobe.com" pages, but none of them works.
    So please, if a member of Adobe Support Team or someone who succeeded to perform the upgrade reads this, I need help and if possible a detailed strp by step process.
    Thks in advance for answers.

    I think i tried all the available ones, and there are many. Why can't we
    have a definitive automatic upgrade solution instead of having to do
    such a number of manipulations ?
    Le 14/03/2013 04:41, Flex harUI a écrit :
    >
          Re: Issue when trying to upgrade FB 4.7 to AIRDSK 3.6
    created by Flex harUI <http://forums.adobe.com/people/Flex+harUI> in
    /Flex/ - View the full discussion
    <http://forums.adobe.com/message/5146932#5146932

  • The current user has insufficient permissions to perform this operation when trying to add Term stored managed navigation.

    Hi,
    i am getting this error "The current user has insufficient permissions to perform this operation." when trying to add the Term store managed navigation like the following screen shot. i am the Farm
    administrator and as well managed services account. also noticed, cannot delete the service application, saying you don't have enough permission to delete the db. but using this account i was able to do everything before in my environment. is anyone already
    face this kind of error, so what will be the way to resolve this?
    Appreciated!

    event though its a farm admin,It should provide the access to MMS.please find the below link for more details and the solution for the issue.
    Go to SharePoint Central Administration Site –> Application Management –> [Service Applications] –> Manage service applications
    2.   Highlight the Managed Metadata Service that your web application is associated with. (Do not click on the link, just click somewhere else on that row to highlight it)
    3.   Click on Permissions button in the ribbon area.
    4.   Add the application pool account used by your web application and give it  ‘full Access to Term Store’
    5.   Click OK.
    http://expertsharepoint.blogspot.de/2014/08/managed-metadata-service-or-connection.html
    Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

  • Ora 12154 error when trying to add a database to VS Server Explorer

    Hi Everyone,
    I get the Ora 12154 error when trying to add a database to VS Server Explorer.
    How do I get around this problem.
    The database service is running and I can connect to the database with pl/sql.
    I can also tnsping the database and that is also ok.
    Looks like a problem with the odp.net software.
    I am running the 32 bit Oracle 11g on a Windows7 Home Premium 64 bit PC.
    I am new to this stuff so please help me step by step.
    Thanks.
    Emad

    Hi J. B.
    I have a question related to this. After you told me about the //host:1521/database alias I tried it in a VB 2008 program and it worked and returned data. At least I know that it can be used in a VB program without issues. I just now need to be able to add a connection with the Server Explorer.
    Anyway here is the VB coding I used. I'm new to this and still learning:
    Imports Oracle.DataAccess.Client ' Visual Basic ODP.NET Oracle managed provider
    Public Class Form1
    ' String to connect to the database.
    Dim strConnectionString As String = _
    "Data Source=//emad-pc:1521/emadeva;User ID=scott;Password=tiger;" '
    ' Associate the connection string with a connection object.
    Dim objOracleConnection As New OracleConnection(strConnectionString)
    ' SQL query for returning data rows.
    Dim strSqlQuery As String = _
    "Select dname, deptno " & _
    "From dept " & _
    "Where deptno = 10" '
    ' Command object to make this query work.
    Dim objOracleCommand As New OracleCommand(strSqlQuery, objOracleConnection)
    Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
    ' Identify what type of command is being used.
    objOracleCommand.CommandType = CommandType.Text
    Try
    objOracleConnection.Open()
    ' Set up a Data Reader and load it with data.
    Dim objOracleDataReader As OracleDataReader = _
    objOracleCommand.ExecuteReader()
    objOracleDataReader.Read()
    ' Convert the department number to a string.
    lblDepartmentNumberFromOracle.Text = _
    CStr(objOracleDataReader.Item("deptno"))
    Catch ex As Exception
    MessageBox.Show(ex.Message, "Error")
    End Try
    End Sub
    End Class
    I still want to thank you for the help you are providing.
    Truly,
    Emad

  • Error When Trying To Add Web Clipping

    Receiving the following error in the Apache error log when trying to add a webClipping portlet:
    [Sun Feb  1 08:17:25 2004] [info] [client 141.146.192.68] MOD_OC4J_0007: Oc4j process unique id:
    C_130.35.162.13.11a3ac.f52e368ff8.-8000#titsto_iasmt.auohsitst03.oracleoutsourcing.com#391727#OC4J_Portal#OC4J_Portal#default_island parsed from cookie of session request: /portalTools/webClipping/htdocs/wcstudio/jsp/toolbar.jsp does not match to oc4j instance with destination name: OC4J_Portal. Ignore this cookie.
    The error "WCS-102" shows up on the web - page while trying to add a webClipping portet.
    We have installed JPDK 9.0.2.6.2 over 9.0.2.6.1 and redeployed jpdk and portalTools. Note that the middle tier is a two node RAC.

    Sorry to resurrect this old topic - but was a solution found for this? I'm having the same problem.

  • Error: 0x80073701 when trying to add Print Services Role in Windows 2012 Standard

    Hello,
    I'm getting an error when trying to add Print Services role in Windows 2012 Standard. I'm getting the same error whether I use the GUI or from PowerShell.
    This is a new server install.
    The PowerShell error follows:
    add-windowsfeature : The request to add or remove features on the specified server failed.
    Installation of one or more roles, role services, or features failed.
    The referenced assembly could not be found. Error: 0x80073701
    At line:1 char:1
    + add-windowsfeature print-services
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
        Exception
        + FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind
       owsFeatureCommand
    Success Restart Needed Exit Code      Feature Result
    False   No             Failed         {}
    Any help with this issue will be greatly appreciated.

    Hi,
    I think you should start with chkdsk C: /F and sfc /scannow.
    Regards.
    Vivian Wang

  • Error when trying to add a project to Subversion source control

    When trying to add a project to source control from within the OPM 10 studio (File - Source Control - Add Project to Source Control), the following error occurs:
    "There was a problem accessing the source control system, probably due to network or contention issues. A retry is recommended."
    This has been tried with Subversion versions 1.6.2, 1.6.5 and 1.6.6, with local repositories and repositories on a Apache webserver.
    Once the project has been added to a repository, by using TortoiseSVN for example, working with source control is no problem.
    Does anyone have a clue what the problem (and a solution) might be?
    Thanks,
    Theo.

    Hi,
    Davin mentioned:
    This appears to be an issue with the source control integration. We are looking into it.I am using OPM 10.0.1.14
    The OPM help on collaborating mentions:
    Open a rulebase project from source control
    To open an existing Oracle Policy Modeling project from a source control repository:
    In Oracle Policy Modeling, select File | Source Control | Open Existing Project from Source Control. When I open the File menu I do not see the "Source Control" at all.
    Is this caused by an installation error or part of the "issue with the source control integration" ?
    Please let me know if I'm the only one experiencing this problem ....
    Thankx,
    Paul

Maybe you are looking for