Having problems with Logitech Vision Pro and AIM and I chat

Can't believe it can be this hard I'm trying to install a Logitech Vension Pro web cam and make with work with AIM via Ichat. I've got the camera to work in some applications so it does work. After many hours on line I decided that I needed to down load the new version of Ichat. But when I tried to install this I get the following error message: Cannot install Ichat Update on this volume. This volume does not meet the requirements for this update. Can some please give me an idea of what I need to do????
Thanks
Myrnarafa

Glen,
Thanks for the reply. The problem is that the Logitech Web Cam will not work in the AIMs program. I have it linked to the Ichat program but when I try to do a video chat there is nothing in the bottom of the chat window about video or audi. On my Windows PC, when you initate a chat window with someone you see on the bottom of the chat window a link to start a vidoe chat or an audio chat.
But there is nothing there on the MAC/AIM/Ichat window. I can type text and that works fine. The camera seems to work in other application and Microphone seems to work if you look in System Preferances/Sounds. The WebCam does not show up by name in the AboutThisMac/MoreInfo/USB but it does work in someother applications. So the problem is getting it to work in IChat and AIMS. Any suggestions would be greatly appreacated.
MyrnaRafa

Similar Messages

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

Do you have Parallels installed by any chance? There is a known problem that causes symptoms similar to this. You do not need to actually be running Parallels at the time and nothing in ActivityMonitor would point to Parallels. An update corrects the problem:
http://kb.parallels.com/111541

Have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture. The Apple icon, usually at top left corner, appears in to

have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
The Apple icon, usually at top left corner, appears in top right corner in a strip including all that left hand. When the computer is restarted, the screen goes back to normal. But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode. My large flat screen is relatively new.
The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.

That sounds like a Hardware problem.
You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation.

I am having problem with my push notifications of facebook and other applications on my 3gs ios5.0

Hi,
I am having problem with my push notifications of facebook and other applications on my 3gs ios5.0 device. I have done too many things have updated my facebook application but still it is not showing any push notification. Is there any settings that i need to do for it? Also it is not allowing me to show on mobile in facebook. Any one here can help?

ok for facetime and imessage go into settings turn them off make sure to make an icloud backup and then go to settings general erase all content and settings and then set it up from the backup it should activate your imessage and facetime

Are you having problems with Windows XP Pro and Airport Utility Updates?

I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.

Well... it worked! :D
I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
DryHeat, yeah it was with SP2 but I got it installed now so no worries
Thanks a lot!

Is anybody else having problems with itunes (10.6.3.25) and ipod touch (5.1.1)?

Lately I've been having a ton of problems with iTunes and my iPod Touch (4th generation). Lots of error messages such as can't connect to itunes store, incompatible application, ipod detected but not identifiable, invalid response received from device, unknown errors [mostly (0xE8000001)], problem with audio configuration, etc. I've done everything I could think of. Uninstalling iTunes (with all the components) then reinstalling with the newest version (10.6.3.25), running diagnostics and such. If it does appear (about 2% of the time) then iTunes freezes and/or it won't sync. I also try to change some info (song title, artist, artwork, etc)(when it DOES come up) and it shows up on itunes but not on my ipod. My ipod appears on my computer but not in iTunes under devices like its supposed to. I've been to all the support threads I can possibly find and NOTHING has helped. I also had the latest version for the ipod touch (5.1.1). And I've never had any issues with iTunes or my iPod touch before. I know I should probably try restoring my ipod but I absolutely do not want to do that unless I have to because i have a lot of music, apps, movies, etc I'm not able to back up. Also, I'm using a Windows 7 computer. Please Please help if you can, I am frustrated because I can't do anything.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2

Webscan problem with HP Officejet Pro 8600 printer and OS Mavericks

I have an iMac with OS 10.9 Mavericks installed and an HP Officejet Pro 8600 Plus N911g printer. I recently downloaded the "HP-Inkjet-SW-OSX-Mavericks_v12.34.37" software update from the HP website but, since installing it, the image preview feature on Webscan now only shows a black screen and I cannot download the scanned image. I have uninstalled the update and reinstalled the old software - "Officejet-Pro-8600_v12.23.0" but the problem persists.
I am not sure if this is an HP problem or a Mavericks bug. Any advice/help would be greatly appreciated

The servicing when the printer is turned on is normal and is required to keep the printheads healthy (not clogged). See here for information.
As for power savings, the printer will automatically go into a low power mode when not printing for some time. It is not necessary to turn the product off and on to save power.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I am having problems with my macbook pro

some documents on my macbook pro are frozen how so i get rid of them it still works but it wont let me log out or x out of the documents

I wanted to post an update on this problem for everyone's benefit. The screen went black due to a combination of a failed video card/mother board. As it turns out, the defective video card was a known problem, and Apple replaced the video card/mother board at no expense to me. They replaced this hardware in my late 2007 MacBook Pro. Please check with Apple; you might be eligible for this extended warranty. After the video card/mother board was replaced, the problem with the dock persisted. Turns out that I had a corrupted Dock file. Once the Dock file was deleted and replaced, all was well. Who said lightning never strikes twice in the same place... Please check to see if you are eligible for the hardware replacement - these parts cost about $1200.00.

Is anyone having problems with the newest update of ITunes and then trying to update the Iphone 4?

I updated the ITunes on the computer and that went ok, but when i went to go and update the IPhone 4 it went to restore it to the factory settings and then something happened where it wouldn't let it update and now the phone is stuck in Limbo world with the apple symbol showing and a status bar, but nothing else. also the phone is not showing up as being plugged in while in this limbo faze.

Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

I'm having problems with Flash in Firefox, no sound and video very fast, OK in Safari and chrome, latest firefox and flash installed, running xp pro fully patched!

cannot get sound on any flash online media also video playing very fast and not buffering properly. same sites perfectly ok in chrome IE and safari

cannot get sound on any flash online media also video playing very fast and not buffering properly. same sites perfectly ok in chrome IE and safari

Having Problems with Adobe Premiere Pro CC

Alright, So I downloaded and installed the Creative Cloud. I'm trying to download the Adobe Premiere Trail because I'm thinking of buying the product. However, After waiting so *******(Excuse the language, you have no idea how frustrating it is) long to download, I'm not sure if it's downloaded or not. It tells me it is installed, but the program won't open. I've tried uninstalling the program to try reinstalling it again, but it just gives me this "1% to 99%", yet it still keeps telling me that it is installed into my computer. I don't know whether or not it installed because I had to wait long hours for it download and it kept getting errors each and everytime. Now it says on my creative cloud that it is "up to date". Why won't it open? Can anybody please tell me? Does it have to do with system requirements? I have a 32 bit sony vaio laptop. My dad has a 62 bit dell laptop and it works very fine. Please help, I don't know what to do.

kevinm14238495
Premier Pro will not work on 32 bit computer. You need to have64 bit computer to Run the product
Please refer
System requirements | Adobe Premiere Pro

Having problems with my Macbook Pro :(

My Macbook Pro is playing up, it keeps overheating then it informs me that it is overheating and shuts my mac off. This only occurs when using big applications like Final Cut Pro, I sent my Macbook Pro back to apple to get it exchanged for a new one. Does anyone out there have the same problem as me???? Please reply Thanks

I think that means your thermal sensor was not functioning correctly. I guess more than a few people have had the same issue and had to return their MBPs. Hopefully your new one will function correctly.

I'm having problems with My MacBook Pro ever since downloading the new OS..

I downloaded
Mac OS X Lion 10.7.2 a few weeks ago, and now I've noticed weird glitches. For instance, my WiFi is SUPER spotty (even though we have RoadRunner top speed), and then I am having these random, yellow QR code-looking things that pop up on my screen whenever I change webpages or open up a new page on my browser (Google Chrome). Any help?

Well for one get rid of Chrome and use Safari. Chrome is not reliable with Lion and should be avoided. Safari and Firefox are the only two really reliable and effective browsers.
Secondly, reinstall Lion:
Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

I having problems with it switching on my macbook and then it automatically switches off

i have had Yosemite for a while and it was working perfectly, and the suddenly is froze and automatically shut down. I tried rebooting it it would come up with the apple logo and a loading bar e=underneath and when it loads the bar fills in with grew but a quarter from the start it it shut downs again. t is not reopening how do i fix my problem? help!!!!
I want to know how to boot up my macbook without erasing my hardrive.

Try booting into Safe Mode. If that is successful, but then a normal reboot fails, you may have some third-party software installed that is preventing boot up. If you have any ideas what it might be, we can help you uninstall it.
OS X: What is Safe Boot, Safe Mode? - Apple Support
The other thing to try is boot into Recovery and use Disk Utility to repair the drive:
OS X: About OS X Recovery - Apple Support
Finally, you can try just reinstalling the OS using Recovery. It won't erase any of your data, but you should still have a backup.

Is anyone else having problems with Candy Crush Saga blinking out and not allowing you to ask friends for help in moving to another level in the game? If so, how do I fix it"

I have been playing Candy Crush Saga for a long time, all of a sudden it is blanking out when I ask friends for help to the next level. What can I do to remedy this?

Hello Pepper 46,
It sounds like an app you installed is not functioning correctly. I recommend starting with these steps from the article named:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
There is additional troubleshooting in the article if this doesn't resolve it.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Having problems with Logitech Vision Pro and AIM and I chat

Similar Messages

Maybe you are looking for