Having trouble finding out why i get   "cannot find symbol variable textio"

Im trying to write a romanNumeral converter program.
I dont know what else im doing wrong!
Please help me to see and understand what i did wrong!

Please help me to see and understand what i did wrong!You are using something called 'textio'
The compiler doesn't know what that is.
It is telling you exactly that.

Similar Messages

  • I have spent dozens of hours over the last years trying to find out why I get the error message "...not authorized to copy" when I try and drag a download from ADE to my nook.  Why is this simple procedure not foolproof.  There are hundreds of people sear

    Typical - what on earth am I doing at this page and why was I sent here
    Now I get a message saying there is an error and my content could not be saved
    What is wrong with you people?
    How can you make such a simple operation so complicated that it is festooned with error messages
    LEARN THE MEANING OF FOOLPROOF YOU IMBICILES

    Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value).  You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
    In the absence of that option, you will need to restore the content of your library from its original sources:
    Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
    Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
    Content imported from your CDs will have to imported again
    The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these).  Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
    In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above.  As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

  • I am having trouble figuring out how to get a date to show on a report

    Hi,
    I have a query with a structure on both my rows and columns.
    In my columns, I have my key figures and on them are period/year restrictions.  For example, the first column is the current fiscal period/year - 1 period, the next column is the current fiscal period/year - 13 periods (so I can compare this year to last year)
    On my rows, I have a structure that is listing sales where on each line, I am restricting by groups of accounts.
    What I need on my report is a header stating what the time period of the report is for.  That is, the restriction of the current fiscal period/year -1 that is being placed on the first column also needs to be up in the page heading.
    This is going to be hard to explain but here goes.  My columns are reporting key figures constrained by time.
    <page header>
    REPORT: XXXXXX
    REPORTING FOR: Per/Yer  (Which is equal to the date restriction that is on the first KF column, that is curr yr/period - 1 period)
    <report body>
    SALES GROUP /  RPT MONTH  /  LY
    Mens  /  amount (restricted to curr year/period - 1)  /  amount (restricted to curr year/period - 13)
    Womens  /  amount (-1)  /  amount (-13)
    Childrens  /  amount (-1)  /  amount (-13)
    I tired adding it to my row structure but since my KFs are constrained by per/year, I can not drop per/year onto my rows.
    I tried to add a column showing time but BEx wants me to add a key figure (since the columns have key figures in them) so that does not work either.
    How can I get the value of "current period/year - 1 period" to be part of the data (not a label) in the query so that I can put it into a header on my report.
    Thanks for your help!

    Hi,
    Click on Query Property,
    In General tab of Query Property, select New variable at Discreption.
    Give Discription and technical name. Select Processing type Replacement path. select Reference Characteristic year/period. In replacement path tab, Select variiable with-  Variable and Select your variable(which will give you previous fiscal year/ period- already exist or you have to create to get previous fiscal year period) and select Replace with - Label. Assign this variable in your query discreption

  • Getting the error "Adobe Send cannot currently send this file" how can I find out why?

    Getting the error "Adobe Send cannot currently send this file" how can I find out why?

    Hey James,
    Please let me know what kind of file are you trying to send using 'Adobe Send' online service.
    Does this happen with every file you try to send or any specific one?
    Have you tried using a different browser? What happens? Check with your internet connection speed as well.
    Hope to hear from you.
    Regards,
    Anubha

  • The transaction log for database 'mydatabase' is full. To find out why space in the log cannot be reused, see the log_reuse_wait

    Every time I get this error, at different points of testing inserts and deletions on my table:
    The transaction log for database 'mydatabase' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
    Why do I keep getting this?  All I'm doing is deleting several hundred thousand records and inserting them into a couple of tables.  i shouldn't have to truncate my log every time or my application bombs out!
    sys.databases only gives me this info for log_reuse_wait_desc which does nothing for me:
    LOG_BACKUP

    sp_helpdb BizTalkDTADb
    ALTER DATABASE BiztalkDTADb
    SET RECOVERY SIMPLE;
    GO
    DBCC SHRINKFILE (BiztalkDTADb_log, 1);
    GO
    sp_helpdb BizTalkDTADb
    GO
    ALTER DATABASE BiztalkDTADb
    SET RECOVERY FULL
    GO

  • The transaction log for database 'WSS_Content' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases

    Hi all,
    Observing the below error in event logs once in every day at 3:30 AM on the on SQL Server Machine, it is being used for TFS 2010.
    The transaction log for database 'WSS_Content' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
    Kindly advice me here on what to do?
    Thanks in advance

    First thing to check is, what is happening at 3:30am to cause the log to fill up?  Is there any maintenance tasks being run against the DB, such as index re-organizations or rebuilds?  If so, take a look at what the job is doing, maybe it could
    be tuned (ex:  A Maintenance Plan with a rebuild indexes task will rebuild *every* index whether it needs it or not.  Look at using something that checks how fragmented an index is, and then intelligently determines what, if anything, to do to that
    index.)
    Basically, the error is telling you that SQL is trying to do something in the DB, and has filled up the log (either because it's not getting backed up often enough, or the transaction in question is running *very* long, or your log is set to not auto-grow)
    So, a couple possible solutions:
    Increase the frequency of Transaction Log backups of WSS_Content (only works if the DB is in Full Recovery)
    If you've got the disk space, turn on auto-growth for the TLog (or just manually grow it larger) {This will work for both Full and Simple Recovery}
    It would be nice to know what's causing the space to not be re-used, but with this occuring at 3:30am, you'll either need to set up an Agent job to run around that time and record its results, or manually run something like "select log_reuse_wait_desc from
    sys.databases where name = 'WSS_Content';"  Me, I prefer to be soundly sleeping at 3:30am and would set up an Agent job to run from say about 3:00am to 3:45am once per minute (maybe even more frequently.)
    DON'T shrink the log, though.  SQL will idealy grow the log as large as it needs it (if autogrowth is enabled) and no more.  If you shrink the file, SQL will just have to re-grow it later again, which can affect performance.
    Jason A.

  • I am trying to set up my apple tv on a sony KDL - 40xbr4. The remote is a sony RM-V302. I plugged it into the HDMI IN on the side of the TV but cannot find out how to get to that input. I am at a winter rental property and brought my Apple TV with me.

    I am trying to set up my apple tv on a sony KDL - 40xbr4. The remote is a sony RM-V302. I plugged it into the HDMI IN on the side of the TV but cannot find out how to get to that input. I am at a winter rental property and brought my Apple TV with me. I did check internet for solutions. The instructions I found said to use a "home button" on the remote.  There isn't one. I sure would appreciate help if someone knows a solution.  My first post - hope I did this right.

    if its anything like my Sony, theres a button top left corner that upon each press i get an audible bleep and the AV inputs come up on screen, i then cycle down to whichever input i wish to select!
    in case your remote is different, the button on my remote has a square with a slightly smaller square just overlapping the first square.
    hope that helps?
    rgds Lee.

  • HT1918 Hi, Can anyone tell me how to go about finding out why i am having to change my Apple ID password everytime i want to download an app ?

    Hi,
    Can anyone tell me how to go about finding out why i am having to change my Apple ID password everytime i want to download an app ?
    Regards

    That page is not meant to be filled in.  It is only to provide guidance.
    To find the page that must be completed, you need to go here:
    http://support.apple.com/kb/ht1574
    Once you have provided your Apple ID, and entered the site, you must them click on reset security questions and follow instructions.

  • I have lost my registration code and I cannot find out how to get it back...

    Can some one help me find out how to get my registration code back? I have been Googling many different places and I cannot seem to find a place to get it back. It would be much appreciated...
    Thanks,
    Nire Inicana

    Hi,
    You can just register again to get the registration code for VS.
    Or  you can find Visual Studio product keys using the Windows Registry:
    For 32 bit Windows:
    visual studio 2010
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\10.0\Registration\PIDKEY
    visual studio 2013
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\12.0\Registration\PIDKEY
    For 64 bit Windows:
    visual studio 2010:
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\VisualStudio\10.0\Registration\PIDKEY
    visual studio 2013:
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\VisualStudio\12.0\Registration\PIDKEY
    Notes:
    Data is a GUID without dashes. Put a dash ( – ) after every 5 characters to convert to product key.
    If PIDKEY value is empty try to look at the subfolders e.g.
                ...\Registration\1000.0x0000\PIDKEY
                  Or
                ...\Registration\2000.0x0000\PIDKEY
    Best Wishes！
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

  • Noise like a bee, no noise when light dimmed down, who kann help 2 find out why?

    noise like a bee, no noise when light dimmed down, who kann help 2 find out why?

    0   com.apple.CoreFoundation                0x95185ea6 CFNumberGetValue + 38
    1   com.zedonet.pde.PRDX                    0x03f38ea6 MyGetTicket + 102
    2   com.zedonet.pde.PRDX                    0x03f33a3c MyInitialize + 188
    This is what's causing the crash, and it sounds related to PrintFab.
    From googling, it looks like removing /library/printers/ppd plugins/printfabpde.plugin will get rid of the crash, but I don't know if that will  make the driver unusable.
    Hope this help.

  • TS3999 My iPhone has stopped pushing info to iCloud and I can't find out why

    My iPhone has stopped pushing info to iCloud and I can't find out why. Can anyone help?  I'm on Windows 7 Home Premium - service pack 1 and my phone is a 4 with iOS 5.1.1.  Thank you.

    Mine has never pushed to the cloud.  PC and MacAir are fine.  iPhone seems to be on its own cloud.  Receives from PC, but not the other way around.  Let me know if you get an answer.

  • I bought the season 7 pass for Doctor Who, but the new episodes are not showing up for download.  Who can I contact to find out why?

    I bought the season 7 pass for Doctore Who, but the new episodes are not showing up for download.  I've been all over the support page, I even looked up my purchase history and there is are none showing and I even bought last weeks episode, The Bell's of St. John.   Who can I contact to find out why I'm not getting the rest of season 7 for download?
    Thanks,
    ChristyQ

    Garmin is sending you to Apple because it is Apple that would have to give you a refund as the actual point of sale.  However, Apple states all sales are final.
    Apple is sending you to Garmin because it is Garmin's fault their maps are out of date and Apple doesn't write the software.  They may not even be looking that deeply and simply perceiving it as a programming "bug" it is up to Garmin to solve.
    Who know whose fault it is that Garmin isn't getting up to date data to put in their maps.
    Ultimately I think you stand the best chance in getting a refund from Apple though it isn't guaranteed.  Apple is the cashier.  You just have to convince them this isn't just a line of code omitted from an application and isn't something that will be soon corrected by Garmin.  Make it clear it isn't a problem with the application running on your device, it is a problem with the data it contains.  Either that or you have to hope Garmin will feel so bad about it they will delve down into their slush fund and send you a refund.

  • Is there some log I can check on my A2107 to find out why it restarts?

    My a2107 tablet shutdown and restarts.
    Is there some way to find out why? 
    Some log I can look at?

    Hi fowvaydriver-
    If the power is suddenly removed there is no time to write a log entry.
    Can you not get what you need from the boot times? If it booted and wasn't supposed to have been shut down that would be a clue.
    Is your UPS functioning properly?
    Luck-
    -DP

  • Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7.  Do you think this is the reason why my iPad cannot find my wireless printer?

    Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7.  Do you think this is the reason why my iPad cannot find my wireless printer?

    1. Turn the router, iPad and printer off
    2. Turn on the router and then wait 30 seconds
    3. Turn on printer and then wait 30 seconds
    4. Turn on your iPad and test print.

  • My old phone broke and I am having trouble figuring out how to restore my contacts on my "new" phone (LG ENV2 Black)...

    My old phone broke and I am having trouble figuring out how to restore my contacts on my "new" phone (LG ENV2 Black).  Apparently the phone is so old that I am unable to install Backup Assistant on it, which sucks.  I have all my old contacts saved on my computer as a CSV and also another copy on a micro SD as VCF.  I have tried moving the CSV from my computer to my ENV2 via both Bluetooth and USB cable, but had no luck with either of those.  I also tried to pop the micro SD into the ENV2, and although I can load all my old pictures/videos/etc. from the micro SD, I do not seem to be able to restore the contacts from card.  I know there has to be some way to manually transfer these files; the contacts are still on my old phone as well; but I was unable to use the transfer wizard for that because my old phonedoesn't seem to be supported by that (Pantech Jester 2)

    Google a program called bitpim, that might do what you want.  Never used it but it's been talked about on the forums.  Other than that you might have to input them manually.  Mary

Maybe you are looking for