Hello I just bought a car VW scirocco and I can't pair the iPhone with the car as the car says that the phone is not compatible so what can I do ?
Please I want to know what can I do to pair my iPhone to my VW as the car says that the phone is not compatible and I tried other phones and it worked very good.
Thanks
You must change or bluetooth module to a more recent one. It's under the passanger seat.
I use this one: 5N0 035 730D. It works great on with the iPhone. You can even play musics from the iphone to the radio (on RCD 510 or RNS 510) wirelessly, using BT-Audio.
I think you can buy it on ebay. It's relatively cheap.
BTW, is your board computer red or white? If it's red there is no bluetooth module comptible with your car and the iPhone. It must be white.
Similar Messages
-
I've bought an iPhone5. After that i've syn that with my old apple ID. But when i login to the apple site it is telling that my phone is not registered. What can i do?
Why exactly do you care if it is registered?
Is there some issue with the device? -
i really need help with that
Maybe here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
Otherwise com back with the exact wording of your error message. The one you gave does not seem correct. -
Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...Any ideas? Thanks
Hi Alxx911, and John Hammer1. After reading John's reply - " You can plug something into it's headphone jack. though" . I thought i'd try out of curiosity. I plugged in some headphones. I didn't expect anything to happen and nothing happened. The audio jack is for the Dell soundbar which is optional.
Here's a direct copy and paste from the users manual: Section About Your Monitor.
Attaching the Soundbar AX510 / AX510PA (Optional) CAUTION: Do not use with any device other than the Dell Soundbar. NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar AX510/AX510PAonly. To attach the Soundbar: 1. Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3. Connectthe Soundbar with the DC power connector. 4. Insert the mini stereo plug from the back of the Soundbar into the computerís audio output jack. For HDMI/DP, you can insert the mini stereo plug into the monitorís audio output port. If there is no sound, check your PC if the Audio output is configured to HDMI/DP output.
This monitor has no speakers. (Like John Hammer1 mentioned). The no speakers feature was one of the reasons I chose this monitor.
Good Luck ! -
just bought ipad mini. As part of set up apple sent email with link 'Verify Now'. I've clicked it repeatedly but not responding. My email account is working fine. Any ideas?
Why not just create an Apple ID for her and then you wont have any problems. Login on iMessage and Facetime using her ID and do the rest with your ID. It will work i tried it on my iPad
-
I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
Here is the crash report:
Interval Since Last Panic Report: 5426204 sec
Panics Since Last Report: 2
Anonymous UUID: 2DD57DDB-BB42-5614-395A-CA6225BDAFD9
Wed Mar 20 11:36:53 2013
panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb0eb950 : 0xffffff801aa1d626
0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
0xffffff81eb0eba00 : 0xffffff801aa435d2
0xffffff81eb0ebae0 : 0xffffff801aa663f7
0xffffff81eb0ebb20 : 0xffffff801aa67398
0xffffff81eb0ebc70 : 0xffffff801aa6887c
0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
0xffffff81eb0ebf50 : 0xffffff801ade182a
0xffffff81eb0ebfb0 : 0xffffff801aaced33
BSD process name corresponding to current thread: launchd
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000001a800000
Kernel text base: 0xffffff801aa00000
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 1070542822
last loaded kext at 707348380: com.apple.driver.AppleIRController 320.15 (addr 0xffffff7f9c53e000, size 28672)
loaded kexts:
at.obdev.nke.LittleSnitch 3908
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
http://eshop.macsales.com/shop/apple/memory/iMac
http://www.crucial.com/ -
i have my iphone set up with itunes on one computer, but i recently bought my own computer. How do I set up my iphone with the new itunes account? It says my phone can only be set up woth one itunes account. How do I remove the previous account?
ThisGal_Drea wrote:
i have my iphone set up with itunes on one computer, but i recently bought my own computer. How do I set up my iphone with the new itunes account?
Do you mean iTunes library?
iTunes account is what you use to make iTunes purcahses.
iTunes library is what is on your computer.
It says my phone can only be set up woth one itunes account. How do I remove the previous account?
No, it tells you it can only be sync'd with one iTunes library.
Simplest way is to copy the entire /Music/iTunes/ folder (thisis the iTunes library) from old computer to new computer. -
Hello,
I'm using a MacBook Snow Leapord and I'm trying to connect it with my Canon MP560 printer/scanner.
I installed the CD and followed along with the manual and did everything it asked, at the end it told me it was finished.
So then I went to go print something and an error had occured so i went to the file menu on Microsoft Word for
Mac and clicked Print/Add Printer and then i click on the Canon MP560 series-1 as it was the only one to click on.
When I did it stated that I already has a Queue for this printer and if I'd like to add a new one so I clicked continue and nothing
had happend. PLEASE HELP
sincerely,
Laura.I would recommend to download the driver appropriate for your system from the Canon webiste or, after installing it, to run software update and it will detect it for you.
If you have the last driver appropriate for your system, you may wish to reset the printing system. To do this, go to Sys prefs/print and fax and, upon clicking minus button, also press Option/alt key. You will be asked to confirm, do it. Then, add the printer by pressing plus button, it should work now.
But, before doing this, download the last good driver, CDs usually contain outdated drivers. -
I just bought a new macbook air for college and I am currently setting it up. I have had a long time apple id as a kid, but I want to set up a fresh, new one for this computer. However, the email I want to use is already associated with my old apple id, can I delete this account completely to "restart"?
No, that is not possible as well as not preferred. If you setup a new Apple ID your previous purchases, downloads, etc. done with the old Apple ID will not longer be available unless you re-purchase them using the new Apple ID.
-
I just bought a new MacBook Air, updated my iTunes on both my Air and my iPhone 5, but my Air won't recognize my iPhone or if it does, it will only show up for a second and then it gets disconnected again. I know it's not the plug because my phone charges fine from the wall...
Hi nryan15,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Best of luck,
Mario -
since i download the new version of i tunes i canot play the songs of my library....it say "the song could not be used because the original file could not be found".
would you like to locate it.i just want to play directly..what i do? please help thanksThis happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
Hello, I just bought OS X Mountain Lion and does not download. What should I do?
I bought OS X Mountain Lion, I see the icon but does not download it. I have tryed several times. The Apple store says there is an error, what should I do?
Yes, thank you very much, I think I have the requirments, what do you think?
Nome modello: iMac
Identificatore modello: iMac10,1
Nome processore: Intel Core 2 Duo
Velocità processore: 3,06 GHz
Numero di processori: 1
Numero totale di nuclei: 2
Cache L2: 3 MB
Memoria: 4 GB
Velocità bus: 1,07 GHz
Versione Boot ROM: IM101.00CC.B00
Version SMC (sistema): 1.52f9
Numero di serie (sistema): W8946DLY5PC
Hardware UUID: 8B5F39C2-D7B7-58BF-9BB9-2D60D0E465B3 -
I cant get my Nano to sync to my computer. It is new and and I downloaded the latest Itunes last week. I hit sync and it makes a sound within a second and then says it is done. What can I check?
Hey OBandPL,
I would use the following article to run through the recommended syncing steps one more time:
iTunes: Syncing media content to iPod
http://support.apple.com/kb/HT1351
Welcome to Apple Support Communities!
Best,
Delgadoh -
Where can I get a serial number with my activation ID if it dosen't work on the ADOBE site?
Well, for your ID just use the ID and password you're using here. If you meant your redemption code rather than your ID, try this:
Redemption Code Help -
MMy Brookstone Scanner no longer works with IOS 8.0. Is an Update coming to fix this?
You'll have to contact Brookstone, the developer of the app in question to find out if they will update the app.
Maybe you are looking for
-
Importing Video from iMovie HD - What's the Trick?
Hello brilliant Mac Fans, I've been working steadily to create a cool demo reel for a client using iMovie HD (6) and Keynote '08. Well, the file in iMovie is Widescreen DV, and looks great. When I export it at full quality (as a dv file,) I play it i
-
Dunning Letter Email for all customers
Hi All, I need your help in my requirement, which goes like this :- In F150 tcode(ecc 6.0), which internally uses RFMAHN20 program to display all customer accounts, we can select a customer and see the dunning letter(It's a sapscript) and also take a
-
Hi I need one urgent help from anyone
Hi, I am looking some SAP HR ABAP objects its very urgent i need to give resume to one of the employer. The object may some what related to this requirement .Or send any HR ABAP Object its very urgent guys..... Rewards will sure.......... (automate a
-
Ich habe Musik von iTunes geladen, später habe ich mein iPhone auf iOS 5 geupdatet ohne die geladene Musik zu sichern... Was tun? Die Belege habe ich noch im Posteingang... I have downloaded music in the iTunes Store and updated my iPhone to iOS 5 I
-
Is old 845E Max the same as 845E Max (HT ready)?
Hi:) I've got MSI 6566 845E Max mainboard. But the only mainboard i found on http://www.msi.com.tw is 845E Max (HT ready). Can i use driver, firmware etc updates if they r for 845E Max (HT ready) to my mainboard? And finally, can i mount a Intel HT p