HELP!!! After faulty update of BB's 8310 OS computer no longer recognizes usb device
i can tell more about it: i had a BB 8310 with working 4.2.2 OS, later i updated it to newest 4.5 version (i updated it using newest apploader 4.5) and it worked fine, but when i installed desktop software 4.5 and uploaded one game second programs action was - it said: updateing system software, i thought maybe it had found some more new system software or something. After that it had rebooted the BB, computer said "completed succesfully" , but the phone didn't start - it went all white and said "549" error. everything i thought would be fixable, but from that point computer doesn't seem to recognize my phone. i did all the possible steps i could find on forums, like: puting baterry in and while the led is red puting mini usb cable in, but nothing seems to work. Is it fixable? i know for i fact that the cable is working. Please good people - help.
Message Edited by dzheredas on 08-03-2009 04:57 PM
OK...even though 549 is not documented in the RIM KB's, it sounds like your BB got bricked in the attempted update process. Here are some articles that might help you recover it:
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
http://forums.crackberry.com/f61/jl-cmdr-83938/
http://adlen45.activeboard.com/index.spark?forumID=123568&p=3&topicID=18834966
Good luck and let us know how it goes.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
After Firmware update for my 5th gen ipod computer no loger recognizes ipod
I updated the firmware for my ipod (a pop up informed my after connecting my ipod that a firmware update was available) waited 20-30 minutes my ipod stayed lit with the "do not disconnect screen" After it rebooted itself -accordingly to part of the update's description. THe ipod never showed up on the ipod dock again nor on my computer's desktop. There are no longer any ipod tab is missing in the itunes prefs as well. I went to disk util -NOTHING- My computer no longer recognizes the ipod -not even as a generic drive. Ive tried different usb ports no dice. Tried the reset on my ipod, tried rebooting my computer several times. I am running the latest version of Itunes 7.01. I purchased my ipod and computer around (last April or May). HELP!
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. After doing some data mining, found out from community this is an long standing APPLE problem- which doesn't get much tech support in terms of fixes. I have an HPPavillion DV6 64 bit, Windows 7 OS . After reading an earlier complaint from 2009 in the support community, I ran diagnostics from ITunes which gave the following result. Can someone please help? (I'm not enough of a techie to know what I'm doing or how to locate /reinstall CD drivers. I am searching for driver disc but cannot locate.)
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
VoiceOver Kit 1.4.2 (222093/222742)
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0043AC7C0368E428
Current user is not an administrator.
The current local date and time is 2012-07-24 23:43:08.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.Doublechecking ... did you have CD/DVD drive tests checked when you ran those diagnostics? (I'm not seeing the CD/DVD test results down the bottom of the results where I'd expect to see them.)
For example, here's what I get:
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Acer Aspire X3400
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003CAD7C0A1258F8
Current user is not an administrator.
The current local date and time is 2012-07-26 10:42:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is supported.
Core Media is not supported. (16008)
Video Display Information
ATI Technologies Inc., AMD Radeon HD 6570
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: d6a87ba725121aa1240b1ce936c23470
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: ATAPI DVD A DH16ABSH, Rev YA12
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 255:57 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 4.
The drive CDRW speeds are: 4. -
Please help me sync my iPad as it is not able to sync after a system update. Several messages 1. Computer no longer authorised and when I reauthorise it it prepares to sync and then it tells me my iPad cannot be written to,
Hi leefromwoodford,
The following article will tell you how to transfer purchased music from your iPhone to the your Mac -
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Specifically -
Transferring purchases
If your iPhone, iPad, or iPod has your purchased content from the iTunes Store, you can transfer the content to a computer that is authorized for your Apple ID.
Note: This option only works for content you purchased from the iTunes Store (as opposed to content from other sources, such as CDs you may have imported). For content you did not purchase from the iTunes Store, synchronization occurs in one direction only. This means your content can be copied from a computer to your iOS device, but cannot be copied from your device to a computer.
Open iTunes.
From the Store menu, choose Authorize This Computer.
Enter your Apple ID and password. Then, click the Authorize button.
Connect your device your computer. If it is synced with another iTunes library, you may be asked if you want to "Erase and Sync" or "Transfer Purchases."
If that alert appears, click Transfer Purchases.
Important: Clicking Erase and Sync will delete any existing content currently on your device. The content would then be replaced with the content that is on the computer.
If you were not offered the option to transfer purchases:
After connecting your device to the computer, its icon appears in iTunes. Click the icon.
From the File > Devices menu, choose "Transfer Purchases from 'Your device name.'"
Note that the computer must be authorized for the Apple ID under which the purchases were made.
You may also want to download the music directly from the iTunes store, rather than using the iPhone. See this article -
Download past purchases
http://support.apple.com/kb/HT2519
Thanks for using Apple Support Communities.
Best,
Brett L -
Hello,
I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13:AK something like that and all the other previously connected devices appear in this same form in the bluetooth list how do I fix this back and it is confusing to connect to a device with no name but some unknown Bluetooth address so how do I find the device name back????
SO PLEAZZZZZ HELP!!!!!An iPod can only pair with an iPhone for internet sharing provided that the iPhone has the subscribed to the tethering plan. The BT profiles do not permit file tansfer between IDevices by BT. The only BT pairsin is by app and those ar for peer-to-peer gaming.
-
After apple wiped my hard drive, my computer no longer recognizes my iphone 4. It will charge, but doesn't show up in my sidebar or in itunes. My computer says there are no software updates available. I'm running OSX 10.5.8 and itunes is 10.3.1.
After apple wiped my hard drive, my computer no longer recognizes my iphone 4. It will charge, but doesn't show up in my sidebar or in itunes. My computer says there are no software updates available. I'm running OSX 10.5.8 and itunes is 10.3.1.
-
I just went to update my iPhone 5S as it asked me to, and it got to the point with the apple logo on the screen and the black loading bar underneath, but then the screen went black and the phone now won't turn on? I went to plug it into my computer and it said "USB Device not recognised"..
PLEASE HELP ME! It's 1am here in england, I need to be up at 6am for work and won't be able to get up without an alarm... my only option is so stay awake!Nothing happened, i managed to get my computer to recognise it and now restoring... but it says 3 hours remaining?! Will i lose everything?
-
When asked to type in my Apple ID it uses a email address that is not mine but is one of my contacts, I cannot access itunes as this is not my email address, this happened after I updated my phone on my Mac computer. How do I get this email address off so I can use my Apple ID ?
settings->itunes & app stores->click on the appleID which is not your and log out
-
After the update of itunes it has not been capable to recognize my ipod touch of fourth generation. Appear the mistake 0xE8000012. What can I do?
See here: iOS: Unknown error containing '0xE' when connecting to a Windows PC
B-rock -
After upgrading to Mavericks, my computer no longer recognizes my ipod.
After upgrading to Mavericks, my computer no longer recognizes my ipod. Screen lights up when it's plugged in, but it doesn't get to the "connected" state and it doesn't show up on my computer, in the /Volumes folder or in iTunes. This has only started happening after I upgraded to Mavericks.
I should also note, that I have restarted my computer and ipod multiple times and have attempted restarting the SMC on my mac, as per
http://support.apple.com/kb/HT3964
all with no luck.
Also, I have updated to the most recent version of iTunes and have checked that the USB ports are being read correctly through the System Profiler. I have also plugged the ipod into the same ports that worked with my keyboard and mouse, with no different results. -
I Recently updated the software on my MacBook Pro. Now, my computer no longer recognizes my external hard drive. Could this be related to the software update and, if so, how do I correct the problem?
Ari343 wrote:
No, the external hard drive does not show up on Disk Utility. I don't have another computer to try it on.
Perform a PRAM reset:
http://support.apple.com/kb/ht1379
Have you tried all the ports?
Have you tried with a different cable?
Have you tested all the ports with other devices to see that they are functioning?
Ciao. -
I just updated an iPhone 4 from iOS 7 to iOS 7.1 and my computer/iTunes no longer recognizes the device; what gives? How do I get iTunes to show the device?
With iOS 7, the "call Decline" button is only available when the phone is awake. To decline a call when the phone is asleep, simply tap the On/Off button.
-
When i update my ipod the computer no longer recognizes it
i have a 30 4 button click wheel and i have tried to update it and the computer no longer recognizes it. i then have to restore the ipod and software and everything works fine, but i would like to find the way to have it updated.
i am trying to update the ipod software with the ipod updater, and to fix this i have to restore the ipod to the factory settings. There is not so much a problem running the older version, but i liked the updates on the ipod very much until i tried to plug it back into my computer.
-
hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA
Marco,
Here are some suggestions:
1) Check the manual the Keithley manual to see how to configure the RS-232.
On some models you need set Factory defaults to USER and turn on the RS-232.
Also there may be a setting for SCPI which you want on (probably on by default).
2) On your PC - open Device Manager. See if a COM port exists and is functional.
You must get this working before continuing.
You can set the COM port parameters by right clicking and selecting Properties.
(On some PCs the onboard ports can be disabled in the BIOS)
3) If step two was OK, open MAX (Measurement and Automation eXplorer).
On the left side, click on Devices and Hardware.
Click on Serial and Parallel.
Go to the COM port you found in Device Manager.
Open a VISA Test Panel.
Now I don't have one I can look at right now, so this is general idea:
Configure the COM port to match the Keithley settings (should be OK if step 2 worked)
Go to the (I think) Input Output tab (you want to send a command)
The command string input should already have a *IDN? entered, if not, type it in.
Click on the Query button to send the command and check the response.
If you get an ID string back (Company name, Model, FW Version ...) then it works.
(Disregard an error saying it did not get enough charcters back.)
I hope this helps,
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help. -
I am unable to sync my Ipod Nano (4th generation I believe) because my computer does not recognize my device. Can anyone help me solve this problem?
Reset the AMDS > How to restart the Apple Mobile Device Service (AMDS) on Windows
Maybe you are looking for
-
Unable to WDS install Win 8.1 VM on Hyper-V 2012 R2
Hi. We've recently gone from Server 2008 R2 (Data Center) to Windows 2012 R2 (Data Center) and we're now trying to install Windows 8.1 clients on our Hyper-V solution. When using the virtual machine creation wizard I create two test machines. One mac
-
How do i duplicate a file that is on acrobat. com?
The duplicate file function is there if the document is in my documents. But it is not there if the file is saved on acrobat.com
-
Conditionally display row report template.
Hi I have a report template based on a Named Column(row template). Everything is working perfectly except I am trying to hide a section on the report if the value is null. In Row Template 1 I have the following <table width="100%"> <tr> <td>#BLOB_CON
-
In my Iphone 5 and I Pad inbox i get dozens of mysterious messages that I can't delete. They all say (No Sender) (No Subject) This message has no content Date: different but all of them way before the internet (late 60's early 70's and some times 20
-
Java.lang.NoClassDefFound Error while using OWB API for Java
I was writing code to use the OWB APIs for Java: I have imported the folowing files: oracle.owb.connection.RepositoryManager; oracle.owb.connection.OWBConnection; oracle.owb.connection.ConnectionFailureException; when jvm tries to get instance of Rep