HELP IN INTEGRATION SCENARIOS

I have the following situation:
I have seven systems. This 7 systems create an text files, that must be load by SAP ECCC.
The scenario is the following:
NON-SAP-Systems --> XI --> SAP ECC
And I have other scenario when, SAP ECC generate a file, and one of the systems must read this file
SAP ECC --> XI --> NON-SAP-System
Please, I need a recommendation, about which is the best form of implement this integration scenarios.
Thank you very much
regards
Dario

>
Hernan Dario Rodriguez Sanchez wrote:
> I have the following situation:
>
> I have seven systems. This 7 systems create an text files, that must be load by SAP ECCC.
>
> The scenario is the following:
>
> NON-SAP-Systems --> XI --> SAP ECC
>
> And I have other scenario when, SAP ECC generate a file, and one of the systems must read this file
>
> SAP ECC --> XI --> NON-SAP-System
>
> Please, I need a recommendation, about which is the best form of implement this integration scenarios.
>
> Thank you very much
>
> regards
> Dario
The best way to communicate with a SAP ECC system is proxy....but what if you have a RFC configured at the ECC system...then in such a case you have to use RFC communication.....you also have an option of using an IDOC....
it totally depends on how your SAP-ECC wants to send/receive the data
using proxy or IDOC also depends on the version of your SAP ECC system...
In both of your scenarios you can make a search on SDN to check if there is any blog available on how to carry out the configuration....suppose your non-SAP system is JDBC then make a search JDBC to SAP....and you will get lot of info....
Regards,
Abhishek.

Similar Messages

Help in Integration Scenario.

In XMLSPY execute Send Server.
No problem.
The interface SXI_MONITOR.
Public next message.
"Split mapping created no messages"
Help my.

Leon,
If the error is in mapping then you could effectively check it by getting the payload in sxmb_moni of your message and check it in IR mapping.
so that you can come to know about the mapping behaviour of particular input.
regards,
Yuva

Need help for configuring integration scenario for AII

Hi,
We are referring to "RFID-Enabled Outbound Processing: Configuration Guide" for transferring materials from ECC to AII through XI.
So far we have been successful sending the IDOC to XI.
When we display the XML message in XI using IDX5, we get the error message "No receiver could be determined".
I request you to help us with the configuration of the integration scenario in XI.
Regards.
Gaurav

Hi Yogesh,
Thanks for reply.
Maintaining XI Directory configuration
u2022 Generate business scenario using business scenario configurator
u2022 Creating a scenario
                  It is fine upto these two steps
u2022 assigning business systems
                  We have assigned "AII" business system
                  only (receiver)
u2022 creating communication channels
                   Following parameters are set for comm channel
                    Adapter type: HTTP
                    Configured as Receiver
                    Transport Protocol: HTTP: 1.0
                    Message Protocol: XI payload in HTTP Body
                    Adapter engine: Integration server
                    Addressing type: URL Address
                    Target host: <name of AII system>
                    Service number: <service no>
                    path prefix: /sap/xi/engine?type=entry
u2022 defining receiver determinations
u2022 defining interface determinations
u2022 defining receiver agreements
                   All these were generated automatically
Are these configurations alright?
Regards,
Gaurav

Unable to Load the Integration scenario into the Integration directory

Hi All,
I am new to using SAP XI.
Require your help on the following issue.
I have built an Integration scenario, added Component Type: Product Version, inserted actions and connections.
I did check for any errors. I found no errors.
When I am trying to load this scenario into the Integration directory its not showing up the scenario in the popup.
Navigation:
Directory > tools> Transfer scenario from repository
The status of Integration Scenario in the builder shows as
"Being processed".
I created the scenario 2 days back.
Can some one help me in this?
Regards,
Meher

Hi All,
Thanks to all who helped me.
michal,divija : Can you please let me know in details how to activate Business Scenario?
I did not create any business process.
Sridhar: I did releases some locks on my process, no luck.
Can you please explain me in more details?
Should I have a process build for my Integration scenario to be activated?
Thanks,
Meher

The userexit is not working in integration scenario- inb. delivery creation

Hi Experts please help,
We know that vl31n is for inbound delivery creation.
in one of the userexits of vl31n, I did code ( shifting the batch to vendor batch )...
So,the user enters batch number under batch field and
fill all other required information and saves to create inbound delivery.
Whilw inbound delivery creation my coding in user exit gets executed and shifts the batch number to Vendor batch field.
This we observed when we check in vl32n or vl33n, the batch entered shifted to Vendor batch field() batch field is space.
This is working fine with vl31n inb. delivery creation.
But in integration testing it failed.
In Integration, what is happening the other system called "ICH" is creating ASN (shipping note) with the batch number, which inturn created the inbound delivery in R/3 via XI as shown like below.
Integration scenario :
ICH System (ASN) --> XI --> R/3 System (Inb. delivery creation)
So when "ICH" triggers ASN to R/3 the inbound delivery creation is happening but the batch number is not shifting to vendor batch field.
when we open the inbound delivery in vl32n, the batch number is under batch field only...it should be under vendor batch field.
My understanding is my user exit coding of vl31n not getting executed in the integration process.
Kindly help me what can I do to shift the batch sending from ICH to shift to vendor batch field.
Please let me know if I could not explain the scenario.
THANKS IN advance.
YOUR HELP WILL BE GREATLY APPRECIATED.

the ASN from ICH, it uses a standard idoc function module IDOC_INPUT_DESADV1 and there is one user exit EXIT_SAPLV55K_012 which calls ZXTRKU07
need to code there.
solved by meetings with some other experts.
THANKS.

XI testing POS Integration Scenario

Hi Folks ,
I am new to XI environment and have a query:
I am configured a process integration scenario for sending TLOG to POSDM. Can you pl advice how can I go about testing my config. At present I do not have any POS-GM system running so I was wondering that I will have to put my *.txn file in the "Source Directory" specified folder...
How can I do a test ..pl advice.
thanks!!

Hi sunny,
No problem .........
Please go thru this simple file to IDoc scenario.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/fileToIDOC&
and if you want to explore more about XI .. sure you want to ...then check out the following step by step scenario guide
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/step-by-step+guides
It will be helpful ......
regards
Ashwin

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

R/3 u2013 XI u2013 MDM integration scenario - Standard import Maps problem

Hi Data Masters,
We are working on R/3 u2013 XI u2013 MDM integration scenario for Vendor Object. We have extracted main table Data using u201CMDM_CLNT_EXTRu201D program. Now while importing the data in MDM we want to use u201CStandard business content i.e. Standard Import Maps (Name u2013 cremdm - 03 u201D but this maps are not mapping all the fields. So do we need to extend this maps..??
OK. Second, To create own maps we are facing following problems,
1) In source section many fields are reflecting twice means in two segments i.e. LFA1 and ADRMAS like Name, City, Street, country etcu2026 whereas in Target section we have one field for the same so how to maps this fields.
2) In source, There are few fields like ADRNR which have values but in target we donot have any fields to map for the same, so how to handle thisu2026
Helpful answers will be rewarded,
Cheers
RC

closed

Interface Mapping for enhanced Receiver Determ. in Integration Scenario

Hi guys,
Defining Integration scenario is a pleasant way working with XI.
But how to define the step "enhanced receiver determination" via message mapping in a scenario?
has anybody come along to this issue?
Kind regards
Jochen

hi,
You use an enhanced receiver determination to have a mapping program determine the receivers of the message dynamically at runtime. Instead of creating the receivers in the receiver determination manually, you assign a mapping to the receiver determination and this returns a list of receivers at runtime.
A typical usage case is if you do not yet know the names of the receivers at configuration time. In this case, you can define a mapping program, for example, which reads a list of receivers from a table or from the payload of the message at runtime.
http://www.****************/Tutorials/XI/RecvDetermination/Enhancement.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm
Edited by: murali krishna on Sep 1, 2008 5:49 PM
Edited by: murali krishna on Sep 1, 2008 6:03 PM

Configuration Scenario for BPM Using Integration Scenario

hi All,
I Have an Scenario where i am using BPM. Most of the blog tells about manually creating all Configuration objects. I had created an Integration Scenario for this scenario by referring to the earlier threads available for same.
Hoe to Create Integration Scenario for BPM Scenario
Integration Scenario in BPM and few more.
My IS looks like
Sender App Component - Integration Process - Receiver App Component
Now when i am trying to create Configuration scenario for same using model configurator, i am getting Model as "Not Configurable"
And when i click "Configurability Check" Button, i am getting below as status:
Component view IS_POC_BPM: Connection from receivePayload to getABSPayload does not have an inbound service interface
Component view IS_POC_BPM : Connection from sendABSPayload to getPayload has no outbound interface
getABSPayload and sendABSPayload are actions for Abstract interfaces.
IS_POC_BPM is the Integration Process Name.
Also in Integration Scenario, when i create connection between sender action to BPM action there is no inbound interface coming. And viceversa.
Please help me in identifying if i am doing any thing wrong in creating this scenario.
Is it possible to create Configuration Scenario for BPM Using Integration Scenario?
Thanks,
Mayank
Edited by: Mayank Gupta on Apr 21, 2010 6:35 AM

I think you shoudl refer the available Integration Scenarios created for BPMs in IR --> SAP BASIS --> http://sap.com/xi/XI/System/Patterns
Sender template will have the Action with Outbound Service Interface and then in the BPM Template the action will have Inbound Interface.....then within the BPM itself this inbound will be mapped to Action with Abstract Interface
may be after looking the Integration scenarios you will get more idea
Regards,
Abhishek.

Multiple message mappings in one integration scenario

I am trying to send a message to a marketplace that uses a web service interface. First I have to map the SRM PO to OAGIS XML, then This must be embedded in the message of the web service which requires a further mapping. In the integration scenario in the repository it seems straight forward, however the configuration of the scenario in the directory seems a little strange. This becaue the middle step does not really have an eternal receiver, as it must stay in the integration engine until the final conversion. Is it actually possible to perform several mapping in series or must I use an integration process for the middle mapping?

Andrew,
I am addressing the same problem as follows.
If you need a canonical mapping (such as OAGIS in your example) you need 2 mappings for 3 messages A(source) to B(canonical) to C(target). If you try to use XI (without BPM) as an action between the source and the target need to configure a channel in and out which as far as I can see is not possible.
When setting multi-mapping you seem to only have the folowing options:
Multiple source and multiple targets but this seems to limit you to one mapping program.
Multiple mappings if I have only one source and one target.
I think this is designed to map one or many sources to one or many targets in one mapping program.
Also you can apply a series of mapping programs to a single source and target pair.
If I understand Michal's solution you would define A as the source and C as the target. You then use multi mapping to get to the final result, but I think this is still on a single source and target. A second solution is to include multiple mappings as additional modules in the channel adpator.
To take advantage of the canonical approach I am using a simple integration process with a receive and send step. All this realy does is get round the problem you highlight of having to have channels for the middle action in your integration scenario. This is an overhead but does allow you to add splitting and combining messages if needed in the future without much additional configuration.
I can't see an easy option without BPM. Maybe there is an alternative but I can't find it. Maybe a next release of XI could include an interface mapping configuration that allows a sequnce of mapping betweem multiple pairs of maps:
Seq Source -
Mapping Program   -
Target
1 -
Message A -
Mapping Program 1 -
    Message B
2 -
   Message B -
Mapping Program 2 -
    Message C
I hope this helps.
Regards
Antony

Integration Process in Integration Scenario

Hi All,
I am trying to create an Integration scenario which can be used at configuration time to create all the config object. But during configuration time, in Assign Services step in Integration Scenario Configurator, it is only showing Business Systems under the product, previously configured in SLD. But i want to use the Imported Integration Process as the sender service. Is it possible?
Also the Assign Service screen is showing Assign Business System Services for A2A configuration. But we are using B2B configuration sometimes. So is there any way to do this?
regards,
Biranchi

Hi
Thanks for the reply. The above switch problem is solved. But now I am facing a new problem. I am making a synchronous call to BAPI from my BPM. How can this be implemented in Integration Scenario.
So how can I send a input message from BPM to BAPI and then take further steps only after getting response from BAPI. Is there any way to define synchronous Action??? And another point to be noted is that we are not using any communication channel to send the message from BPM or receive the response in BPM. We have only a receiver communication channel which receives the message for the BAPI.
So please help in solving this problem.
regards,
Biranchi

Problem for Bapi Call in Integration Scenario

Hi
I am creating an Integration Scenario at Design time which can be used during configuration time.In the Int. Scenario, I am using a Int Process(BPM). I am making a synchronous call to BAPI from my BPM. How can this be implemented in Integration Scenario.
So how can I send a input message from BPM to BAPI and then take further steps only after getting response from BAPI. Is there any way to define synchronous Action in Int Scenario??? And another point to be noted is that we are not using any communication channel to send the message from BPM or receive the response in BPM. We have only a receiver communication channel which receives the message for the BAPI.
So please help in solving this problem.
regards,
Biranchi

> Thanks for ur reply. I am trying to follow the suggestion given by u. U have specified that the BAPI in R/3 system has to be inserted as an application component. But I am unable to do that. I am using IDES system for the BAPI,but in the selection screen for the Application Component we have only instances of installed product in the SLD. So how to find out the application component to be imported.
>
What you need to do is, first of all your import the BAPI (RFC) into XI system. (I hope you must be knowing how to import the RFC & IDOCs into XI system). Make sure this BAPI is remote-enabled under attribute TAB in R3 ---> SE37.
Now this imported BAPI (RFC) will be used in your message interfaces and this message interface will be used inside ACTION. And then you can use this action in your Integration Secnario as mentioned in the picture above in my first reply.
Sorry for the confusion, you need to R3 business system name rather inserting the BAPI as a business system under 3rd swim lane.
> And another problem is that I have to create an action for in the application Component containing BAPI and then it should be connected to the action in BPM for interaction. I have created one action for this and given the BAPi as both outbound and inbound interface. Is this the proper way to do this???
>
As mentioned above, after you import the BAPI (RFC) in XI you can create the messge interface. There should be two Message Interfaces. One for sending the request and other for receiving the response message.
Regards,
Sarvesh

Configuring Process Integration Scenarios for Advanced Adapter Engine

Hello @all,
i've an asynchronous SOAP scenario and would like to configure an integrated configuration for Advanced Adapter Engine using a process integration scenario. In the documentation (Link below) it is described, that you can select local communication using AAE in the model configurator, but I couldn't find any hint. Any idea?
Documentation:
http://help.sap.com/saphelp_nw73/helpdata/en/48/ce987b18d3424be10000000a421937/content.htm
Thanks and kind regards
Andreas

Hi,
Use thse links:
Advanced Adapter Engine Configuration in PI 7.1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?QuickLink=index&overridelayout=true&47047071760975
Sreeni.

Mix B2B and A2A in integration scenario

Hello XI experts,
I'm trying to build an integration scenario in the repository that I want to import later on into the directory for automatic configuration.
The scenario is HTTP -> XI -> RFC. On the sender side I would like to use a business service, so I selected 'External party with B2B communication' for the sending application component. On the receiver side I would like to use a SAP business system, so I didn't select that option there.
Now, if I import into the directory, this doesn't work as expected. I can select my business service for the sender side, this works. However, for the receiver side I always have to specify a virtual receiver service and my receiver determination and interface determination are created with a virtual receiver service in it.
Is there any way to avoid the virtual receiver? Any help is appreciated!
Best regards,
Matthias

Hello Aamir,
you are right, I don't need virtual receivers for my scenaro and I also don't want to use them.
However, when modelling my scenario with an integration scenario in the design, I'm forced to do this and I would like to know whether there is any way to avoid this.
In order to be able to use a business service on the sender side, it seems I have to select the checkbox 'External party with B2B communication' in my integration scenario. When importing & configuring the scenario in the directory, I am then able to select by business service for the sender side. However, for the receiver side I have to specify a virtual receiver, otherwise I cannot finish the config wizard.
Any more ideas?
Best regards,
Matthias

HELP IN INTEGRATION SCENARIOS

Similar Messages

Maybe you are looking for