Help!......Is it possible to perform automatic code validation for Teststand?

I work for a UK Aerospace company supplying a Control Module for use in a Computer used on a modern fighter aircraft.
My main role is in the design of the Control Module, however I have recently taken an interest in exactly how the board is tested by the ATE.
The ATE is used to sequence Production Acceptance Testing, and we have been asked by our customers, both internal and external, to perform a 'Code Walkthrough' of the Teststand code ......Tedioussss!!!!!
The 'Code walkthrough' is required to check that the Teststand software and associated hardware, is doing what it should do.
As a company, we produce Level A control software to DO178B, Level A, however we don't have much experience in Code Validation of Test Software.
We have Teststand ver 2.0 running on the ATE, and want to know if there are any auotmatic code validation techniques, either for this version of Teststand or any of the updated versions. Specifically we need to perform a 'Code walkthrough' of the software.
Any help would be appreciated, since we have an iminent delivery deadline.
Thanks,
John

John and Ray,
I talked to some TestStand developers the other day and mentioned that I would love to have a tool to run to perform a check of the parameters for each step. You can presently step through them and they will each show any parameter problems. I mentioned that in LabVIEW, this automatically happend when you open the VI and the run arrow breaks if there is a connector pane change or a datatype change (if it is no longer compatible). I would like to see a tool in TestStand to run an analysis on a sequence that would show these problems at edit-time, instead of run-time. I think such a tool would be a good start toward what you are looking for.
Just a thought.
Bob Young
P.S. If you want a feature, be sure to tell NI or they won't know!
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Similar Messages

Possible to Perform a "Silent Install" for ORDS?

Version 2.0.9
Our Configuration Management group would like to avoid having to manually configure the war file each time it is deployed to a new environment.
Is this possible using some sort of response file or by manually editing a(some) configuration file(s) (or any other way)?
Thanks,
-Joe

Sounds like this might do the trick. Thanks!
I'll pass this along to our CM guys and see if this works for them. If so, I'll mark this one as answered and give you credit.
BTW, per forum rules, you really should register for an actual forum ID rather the anonymous ID.
Cheers,
-Joe

Tax Codes valid for only A/P and A/R

Please excuse if this has been answered before, but I was unable to find a previous answer. We are working in SAP Busines One 8.8 and we have created a large number of tax codes. I would like to know how to differentiate which tax codes shoul be used strictly for A/P and which are to be used strictly for A/R.

Hi Justin..........
Welcome to SAP Business One........
Actually the taxes we create in database is same for Sales as well as purchase. Because VAT4% is applicable on Purchase as well as sale.
But if you have to differentiate it accounting wise then you have to only define Tax Account during Sales and Tax Account during purchase which is standard and this can be defined in Tax Type....
Hope this may help you......
Regards,
Rahul

How is it possible to extend pattern chars valid for Date formatting?

Hi
I need to represent Calendar.DAY_OF_MONTH and Calendar.MONTH date fields in one symbol (1,2,3,..,9,A,B,C,D..) and keep working standard patterns
SimpleDateFormart doesn't give such possibility.
In a result i want to have something like that:
ExtDateFormat edf = new ExtDateFormat("yyyy/B/C"); // where B - is month in (1,2,3,..,9,A,B,C), C - is day in (1,2,3,..,9,A,B,C..)
System.out.println(edf.format(Calendar.getInstance().getTime())); // prints something like "2008/03/D"

You can extend the wireless range of the AirPort with a D-Link or the other way around ... BUT only if the connection between them is wired. This would be the basis of a roaming network. If you must have them interconnected by wireless, then it will NOT work.

Intel Galileo board - is it possible to run LabView code

Hello,
can anybody tell me, if it is possible to run Labview code on Intel Galileo board (http://www.intel.com/content/www/us/en/do-it-yourself/galileo-maker-quark-board.html) ?
This board is Arduino "compatible", but runs x86 architecture and Linux. So it is possible tu run LabView Linux runtime on this board (and LabView code)? If answer is yes, can anybody provide howto?
I'm not interested in LINX (https://www.labviewhacker.com/doku.php?id=libraries:linx:linx) which just access the Arduino board. It is just "comunication API" allowing to access arduino board but not to develop a code arduino can run.
It would be great if there will be possibility to develop all code in for Arduino board in LabView (even with some limitations).
Thank you for any answers
Pepin

dkfire wrote:
Hooovahh: The Intel Galileo board is like the Pi and BeagleBone Black boards.
They run a "full" Linux. They can run normal compiled linux programs.
The Intel board is just a little smaller than the Pi/BBB, with "only" 400Mhz processor, but then it is a x86 processor and not a ARM like the two other boards.
But I don't think that LabVIEW have any run-time enginen for this board.
If that is the case then what is wrong with loading up the Linux Run-Time for x86 processors that NI has? I have no idea what the process would be to bring over the installer or executable but if what you are saying is true then it seems more likely that it could work.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

SRM 7.0 company code selection for manual PO

Dear All,
We use SRM 7.0 and I have created a purchasing group under a central purchasing organization. This purchasing group is responsible from procurement of two different Company Codes. I did all the assignments in responsibility tab and attributes tab under PPOMA_BBP.
When i try to create a manual PO, I don't see any option to select the company code, either in "Overview" tab , nor in "Header" tab.
Does anybody know or help me how to select/enable company code selection for manual PO creation ?
Thanks in advance,
Best regards,

Dear Kumar,
Thanks for the info. In my organization, there are two company codes and apart from them there is a Purchasing Org.
All the attribute settings are done for these company codes. While creating a PO, as there is no field for Company code, system determines the company code automatically in background. (let's say Company code X). But I'm trying to create a PO for company code Y. When I enter the cost center, I got the error "Cannot purchase between company codes".
So how am i going to select company code Y ? How the system will determine company code Y ? Can you please give in details what must i do ??
Thanks in advance,
Best regards,

Problem in automatic batch determination for components in process order

hi
Ours is a process order industry. Here we prepare food items.
We are entering manual batch for finished product. We want to perform automatic batch determination for one of the components raw material. For other packing material we do not want to maintain batches.
The batch procedure picked is me0001 for 261 movement type instead of C00001.
Because of that we need to enter batch manually.
Send us the procedure to automatic batch determination for components.
regards
ravi

Ravi,
Before posting please do search in this forum because this topic has been discussed many times in past.
Please check below links which could be helpful to you Automatic batch determination in process order
http://www.sapsword.com/home/sap-batch-management/sap-batch-determination
If you still have issues then please come back.
Br
KK

Automatic batch determination for quality inspection stock

Hello, gurus.
Could you please, help me with the following problem: I have received on the certain storage location some quantity of material maintained in batches into quality inspection stock with 501 movement type. Now I would like to make reverse posting, but I do not want to use cancellation of the document, I need to use 502 movement type and determine batch from quality inspection stock with automatic batch determination in MIGO transaction. I assigned Batch search procedure to 502 movement type and created all necessary condition records. I use Checking Group for Availability Check CH and Checking Rule for Availability Check 03 where I include quality inspection stock. However no batch can be determined. But if I use 331 movement type, everything is OK, the batch is determined without any problems. If I manually put batch and valuation type for the material, the system shows no error.
Why it is not possible to do automatic batch determination for quality inspection stock then?

OK, let us talk abou it. I check it in my system, actually 502 can work, but I can't trigger BM determination by 501. Maybe BM determination onlys to select some existing batches for consumption. For 501 in my pratice I can select all the existing batches to be added or just add a new batch.

Automatic goods receipt for more than one phase

Hi all,
I want to make automatic goods receipt in the confirmation COR6N for more than one phase , i know that it is not possibe in the standard system but is ther any fuction module or note can support this issue?
Regards
Ahmed Sobhi

Dear Ahmed Sobhi,
If my understanding is correct,then it's not possible to perform Automatic GR for more than one operation or phase in standard
SAP.
Regards
Mangalraj.S

Automatic Schedule Lines for SA

Dear Gurus,
Is it possible to create automatic Schedule lines for Subcontracting Scheduling Agreements????
cheers

Hi
It is possible to create SA for item catgory L. No specific configurational setting is required.
Pls check
Regards,
Raman

Looking for best jQuery.ajax & JSON code validators for VStudio 2013 SP Dev

Hi All,
As a new SharePoint 2013 developer I’m looking for the best Visual Studio 2013 Intellisense Extensions or code validators for:
1. jQuery.ajax
2. JSON
3. JSON.stringify
The reason for this is I sometimes make silly syntax mistakes that take hours to correct. For example the text marked in green below show
the small errors I made yesterday, and got no help from Visual Studio.
************************Start Of Code************************
var call = jQuery.ajax({
url: _spPageContextInfo.webAbsoluteUrl + "/_api/SP.WebProxy.invoke",
type: "POST",
data: JSON.stringify(
"requestInfo": {
"__metadata": {
"type":
"SP.WebrequestInfo"
},        //should be R
"Url":
"http://services.***********/?$format=json",
"Method":
"GET"
heaaders:
//two a's{
"Accept":
"application/json;odata=verbose",
"Content-Type":
"application/json:odata=verbose",
   //should be ;
"X-RequestDigest": $("#__REQUESTDIGEST").val()
call.done(function
(data, textStatus, jqXHR) {
if (data.d.Invoke.StatusCode == 200) {
var categories = JSON.parse(data.d.Invoke.Body);
var message = jQuery("#message");
message.text("********* service:");
message.append("<br/>");
jQuery.each(categories.value(
function (index, value) {     //should
be ,
message.append(value.*********);
message.append("<br/>");
} else {
var message = data.d.invoke.body;
            //should be capital letters
alert("Call failed. Error: " + message);
//should be errorThrown
call.fail(function
(jqXHR, textStatus, errorThrow) {
var response = JSON.parse(jqXHR.responseText);
var message = response ? response.error.message.value : textStatus;
alert("Call failed. Error: " + message);
************************End Of Code************************
Visual Studio didn’t highlight any of the errors I made. The only help I got was from a message
box with the message “invalid character” (see screenshot below).
Even with Fiddler it was impossible to see where the errors were. Last week I had a similar problem with a much larger block of code. One syntax mistake that was not highlighted by Visual Studio cost me hours of lost time.
I hope you can help
CEStar

Hi,
As this question is more relate to Visual Studio, I suggest you post it to Visual Studio Development Forum, you will get more help and confirm answers from there.
What’s more, I have seen a similar post from you in the link below, please check whether Crystal’s post is helpful:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/dbde39a0-18a5-4e15-9b5b-6b41cc4350d0/help-finding-the-best-intellisense-extensions-or-code-validators-for-visual-studio-2013?forum=visualstudiogeneral
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to activate Compny code validation ( cross company code)

*Hi ,*
*We migrated classic GL to New GL before one month Now*
*I am rollout new company code, after completed all configuration I found uncopmplit configuration of company code validation is not active in controlling area config ( Transaction Code- OKKP) , which is related to cross company code ( Indicator for company code validation )*
*can anybody provide solution to activate company code validation*
Thank ,
Jeetendra

Hi ,
I want to activate company code validation for cross company code still it is inactive
without activation I can not use cross company code for costing
Edited by: jitu konde on Jun 15, 2011 9:38 AM

Cannot perform Automatic Clearing F.13

Hi Experts,
We encountered difficulties to perform automatic clearing for a GL. This GL is for the purpose of GR/IR clearing account.
The system will prompt out the error log "No clearing procedures were carried out".
Also we are not possible perform with manually cleared (F-03). The error message "GR/IR clearing account cannot be manually cleared"
There is 3 line items was affected with a same PO #. After further checking additional rules for automatic clearing OB74, the entired GL was set 5 criterion : EBELN (Purchasing Doc), EBELP (Item), MENGE (Qty), WRBTR (Amount), GSBER (Business Area).
So I further browse the 3 line items to PO level. Found that the PO have 1 line item only.
But the GR amount is not tally with the IR.
PO line item = RM 29,8000
GR line items
Mvt =101, Posting = 21.09.2006, Qty = 0.2, Amount = RM 5960
Mvt = 102, Posting = 21.09.2006, Qty = 0.2, Amount = -RM 5960
Mvt = 101, Posting = 21.09.2006, Qty = 1, Amount = RM 29,8000
IR line items
Posting = 26.09.2006, Qty = 0.2, Amount = RM 5960
Posting = 20.07.2006, Qty = 0.8, Amount = RM 23,840
Is it because the GR and IR line items is not tally and causing the 3 lines item cannot clear in the F.13 ?
How could we solve this ?
thanks.
rgds,
tee
Edited by: Tee Chai Sin on Jun 16, 2010 12:08 PM

Hi,
   Remove the WRBTR Condition, this requires that the value in the items are identical.For GR/IR accounts this does not make sense,by default items only get cleared when the total value = 0.
eg in this scenario
              GR       -1000
             Invoice   1100        (overcharge)
            Credit note -100
   WIth WRBTR these will never clear because 1000 <> 1100. Remove WRBTR and these will clear as a single clearing.
Kind regards

Automatically perform calculations in report for editable items

Hello,
I have a report which consists of some editable text items. These editable items correspond to different columns in the table. Now in the report I want to make one column item to be automated so that it can perform some calculations based on other columns data entered by the user in the report. Like, for example if the user changes text item data for col3, col4 then it should automatically perform the calculations for col10 ; similar to onchage event. Consider a situation where in a user comes and enters data in the report throught the text item for col3, so whenever user changes the data for col3 it should perform the calculations for col10 automatically.
Can anyone please help me with this issue.
Thanks,
Orton

Shijesh,
Sorry for the delay in getting back to you.
In my case its a normal report but the thing is I need to calculate based on the data entered by the users in different text items which are present in different regions.
I have five fields to calculate on the fly like based on the data entered by the users. Below are the five columns. I have the item Ids specified for each of these editable items present across different regions.
PITIA's (f20) = First P And I Amount(25) + County Tax amount(f26) + Hazard Ins Amount(f27) + Over or Short Amount(f28)
F/E Ratio(f21) = PITIA's(f20) / (Borrower 1 Income(f29) + Borrower 2 Income(f30)) (This should be %)
B/E Ratio(f22) = ( PITIA's(f20) + MI Payment(f31) + 2nd Mort Payment(f32) + Revolving Liabilities(f33) + Installment Liabilities(f34) ) /( Borrower 1 Income(f29) + Borrower 2 Income(f30) ) (should be %)
LTV(f23) = First Principal Balance(f35) /Current Value(f36)
Net Disposable(f24) = ( Borrower 1 Income(f29) + Borrower 2 Income(f30) ) - ( PITIA's(f20) + MI Payment(f31) + 2nd Mort Payment(f32) + Revolving Liabilities(f33) + Installment Liabilities(f34) )
shijesh can you please help me out with these calculations.
Thanks,
Orton

Is it possible to add automatic insertions in a RH 7 template?

I'm new to RoboHelp and to HTML altogether, but learning quickly. I'm developing a help system with both General help and How to's. I was wondering if it possible to add automatic insertions in a RoboHelp HTML 7 template, as you would in a Word .dot with macros, or if I need to repeat creating tables and numbered steps all the time.
Your support is greatly appreciated.

Hi again
Okay, clearer now what you need to accomplish.
You could take a couple of approaches.
Approach one - Create a topic and define a table. Configure as you would like to see it. Then when you need it, you open the topic containing the table, copy it and paste it where you need to use it.
Approach two - Create a Table Template. Instructions for this are found on fellow Adobe Community Expert Peter Grainge's site at the link below.
Click here to visit Peter's site
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Help!......Is it possible to perform automatic code validation for Teststand?

Similar Messages

Maybe you are looking for