HELP Linksys WRT300N v2 after Upgrade death

To upgrade the router from firmware version 2.00.8, it requires
two steps as follows:
step 1) Upgrade the router using the bin file called: wrt300n.bin
step 2) Upgrade the router using the bin file called : wrt300n-2.00.20.bin
step 1 upgrade
rebooting 30 sek
after not connecting with cable network.
HELP
Message Edited by Kralj on 03-18-2009 04:30 PM
Message Edited by Kralj on 03-18-2009 04:32 PM
Solved!
Go to Solution.

Please explain me in details whats the exact problem you are facing it.

Similar Messages

Help does not launch after upgrading from RH5 to RH7

My problem is similar to CaroMe1's. Topics within chm files
created using RH5 and integrated into our software product launch
correctly when a Help button is clicked on a dialog. After
upgrading to RH7, using the the same project files, chm files
created using RH7 do not launch at all; that is, nothing happens
when a Help button is clicked on any dialog.
Thanks in advance for any advice!

The .chm filename and the .xpj filename are the same.
Sorry if I was swerving and incoherent! I probably shouldn't
have posted after traveling and no sleep!
Here is how I tested for the source of this problem:
1. I created a .chm file using RH 5, integrated it into our
product, clicked on the Help button on any of our dialogs, and the
appropriate Help topic displayed.
2. I created a .chm file using RH 7 (using the exact same
project files as in the previous step), integrated it into our
product, clicked on the Help button on any of our dialogs, and
nothing happened. No topic, no Help. Nothing.
Is that a better description of the problem? (I hope)
Thanks again!

HT1349 Hi...need help to activate 3GS after upgrading ios from 4.1.0 to 6.0.1

Hi...I have a 3GS and after upgrading the ios i am unable to activate the iPhone..its repeatedly giving the same error as "Your iPhone could not be activated because the actuvation server is temporarily unavailable.Try connecting your iPhone to iTunes to activate it. If this problem persists, contact Apple Support at apple.com/support."
I have tried the numbers and they are re-directing me again to the website for support.
Pls assist.
~Akash

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?

TS1368 HELP!!! After upgrading to IOS 6.13 my IPAD Stucks in a plug-in screen and the Itunes. When i Try to connect to iTUNES pop-up message apear "iTunes has detected an iPad in recovery mode.. You must restore this iPad before it can be used with iTunes

I have windows 8 enterprise OS and iTunes ver. 10.5.0.142. I was upgrading my iPad to IOS 6.1.3. After finishing the upgrade my iPad Reboot and currently stucked-up in a plug-in screen and iTunes Logo. When I try to connect it to the iTunes pop-up message appear saying " iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes." In short, I push the restore button then another pop-up message appear saying " The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." I tried many ways but still no luck. I repeatedly reboot the iPad and open the iTunes still the same problem. I try also to uninstall the iTunes and installed the lower version but still the same problem, I even check the firewall if the ITunes was block or My privileges is administrator to run the iTunes or even reset my winsock but the problem still remain. PLEASE HELP! Thank you in advance!!!

Turn off your firewall and antivirus software.

My Linksys WRT300N died, after exactly 1 year of service

Had lots of problems with it. I bought it just 13 months ago. Warranty is 12 months. I am glad that it died. I switched my old D-link wireless router back on, and it worked like a charm. Never again Linksys. Last visit to this site. Wish you all good luck. James Wang

500gb is huge compared to most and I wonder if you are considered a heavy user in this context
Heavy users: Heavy users can cause peak traffic volumes to exceed the engineered maximum load. In practice this refers to a very small proportion of users of a network whose use is excessive to the extent that it impacts on other users.
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

HELP Itunes wont launch after upgrading

I downloaded the latest Itunes, and then tried to launch it.
I keep getting the following message
"error getting file security :\C\program files\get last error 5
I have even tried to remove I tunes through the add & remove section in the control panel, but this also does not allow me to do this and i get the same message.
Can someone help ???

I just bought a new iPod Nano and installed iTunes 7.02 sucessfully and it wont launch at all...it simply sits there.
some preliminary questions.
are you getting an error message? if so, what does it say? include error message numbers if you're getting any.
or are you getting no error messages whatsoever when you try to launch itunes?
if you're getting no error messages whatsoever, do you just see the wee hourglass for a few seconds, and then nothing? if so, do you also have Norton Internet Security 2005 installed on that PC?
also, reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds?

Help- music library disappeard after upgrading

Having just upgraded to iTune 5, the program will no longer load my iTunes library. I went to its preferences and ensured that the path was proper, but to no avail. I have tried for the last 4 hours to access the article on the support page about this, but I get a message that the server can not locate/load this article. Please help. Thanks.
Bob

For Apple's "cure", go to the following support article:
http://docs.info.apple.com/article.html?artnum=301895
However, I now have iTunes 5 working as it should, and with all of my music and my playlists. Just before upgrading the first time I cloned my entire hard drive to an external drive using Carbon Copy Cloner. When I could not get my playlist back, I erased my primary hard drive and cloned the external drive back to my primary. I then did the upgrade again, but with some changes. The first time I upgraded I accepted the Software Upgrade "offer" to upgrade 4 things at once - Quicktime, Java, iTunes, and something about iTunes for a phone. This time I first did the Quicktime and Java, restarted, repaired disk, permissions, and ran Disk Warrior. Then I upgraded the two iTunes downloads, and did all of the above maintenance again. It now works perfectly. However, I have no idea if these changes had anything to do with my success, or if it was just plain dumb luck and the alignment of the stars.
Bob

Help - Won't Startup After Upgrade to SL

Third time around with this. Received my 'up-to-date' DVD in the mail today. Backed up via Time Machine and then tried to upgrade.
First attempt had the installer stop like 10% in and then the system rebooted to 10.5.7.
Second attempt had the installer complete, system restarted, only to hang with the spinning beach ball. No menu at top of screen, no dock, no desktop icons.
Restored Time Machine backup and then tried again.
Installer completed 100% - system restarted. All I get is the spinning beach ball of death. My wallpaper shows up correctly - this time the dock is there, but no menus or desktop icons.
I restarted in safe mode, repaired permissions and zapped the PRAM and it STILL doesn't work. Am I just going to have to restore from Time Machine again and say forget it????
Suggestions?!

> C You must use SNAC to access SQL 9.0 or later. See note #734034
> C Please remove profile parameter dbs/mss/force_sqloledb.
> C Please unset environment variable MSSQL_FORCESQLOLEDB.
Did you follow those advises?
Markus

Help! Apps crash after upgrade to iOS 7.0.3

Hello
I just upgraded my iPhone 5 to iOS 7.0.3 and now nearly all my apps crash as soon as they open. I tried a soft reset (held down on/off button and home key) and it didn't do anything. I also upgraded all the apps to the latest version.
Does anyone have a fix for this?
Please help, my iPhone is almost useless because of this.
Thanks!

If you haven't cleared the Multitasking for a while, I would suggest doing that. If that doesn't work, clear cookies and website data, and that might cause it to be faster and less likely to crash. Then turn off and then back on if both of those don't work.

Can't stay connected to Linksys RE1000 extender after upgrading to Yosemite

Ever since upgrading to Yosemite I'm having trouble staying connected to the WIFI network that I have extended through a Cisco (Linksys) RE1000 Wireless-N extender. It was working fine prior to the upgrade to the final version (even through all Yosemite preview versions).
I've reset and resetup the RE1000 and I continue to have the problem. The WIFI seems to work fine when I connect to other WIFI networks, it's just this one for some reason.
Anyone using one of these?

I've reset and it says it doesn't work with Yosemite... currently engaged in a twitter conversation with @LinksysCares.
So you buy an extender (two years ago) and already it's become useless.
Thanks Apple & Linksys.

Help, Can't Sync after upgrading 8830

I just upgraded both my phone software to version 4.2.2.196 AND my Desktop Manager to version 4.7.0.32.
When I go to sync, it asks me the client (Outlook), then goes through and says finished, but immediately I get a dialog box with "cannot find system in data file"
Ideas please?
Also, my email seems unaffected.
Appreciate,
Paul

Did you get such report from previous versions of BB Desktop Manager software?
If no - seems that there is a bug inside of BB Desktop Manager software 4.7.
Try to download and use one of previous versions.
You can download it here: http://na.blackberry.com/eng/services/desktop/

Need help with skipping audio after upgrading to 10.9.1.

Having read the fine print, I now know that I should not have upgraded to 10.9.1 in the middle of a project. So, started with a brand new library/event/project and I am still getting dropped out audio. Video image is fine. When I scrub back and replay a clip, it sometimes plays better but still skips - only in new places.
Tech info: shooting with Canon C-100 converting files through Brosoft MTS (422 HQ - Audio pcm_s161e at 48000hz) using 2010 MacBook Pro with 345gb free on internal with 8gb of RAM and 380gb on Seagate external where files are located.
Any advice would be greatly appreciate. Oh yeah, happy new year....!

With all the updateing of stuff can you confirm which you changed.
Lastest MAC Operating System 10.9.1
Latest FCP X 10.1
Al

Help: POST error 0167 after upgrade

Hi all,
I have a Thinkcentre A55 (9641A45) and I am trying to update it.
I have replaced the original Core 2 Duo E4300 (1.8 Ghz) CPU with a newer E4700 (2.6 Ghz) cpu. The Intel 946GZ chipset is compatible so this shouldn't be a problem.
Half-way through the startup I got the "POST Error 0167: no processor BIOS found" message. after a few seconds the startup continues with no other errors.
However, when I check the processor it is running permanently at half speed (1.3 Ghz).
I try going into the BIOS (I have the latest that Lenovo has provided) to see the CPU settings but the advanced settings are hidden.
Anyone have any ideas as to why this is happening? Any suggestions on how to fix this?

Just a thought, have you tried to reset the bios? Take out the battery on the motherboard for about 15 mins and put it back in then see if you can access the BIOS settings. Make sure you have a copy of what settings you have in the BIOS though.

After upgrade CUOM/SM from 2.1 to 2.3, I cannot launch CUSM.

Dear Experts.
I recently upgraded CUOM with SM in same server from ver 2.1 to 2.3, and changed IP address and Hostname as well.
I am new to this Cisco management system, I have a few question and need your help.
1.     After upgrade, do I really need to re-register 1040 Censor by uploading new image ? is it compulsory after upgrade ?
2.     I did re-discover, but it took a lot time, is it normal behaviour to re-discover with 3 CCM, 3 GW and 1 Unity ?
3.     I have 1000 license and this l saw error message sometime saying that my license number is not enough.
        We have more than 1000 IP Phone, so is this number of 1000 license consumed by all IP phone ?
4.     After changing hostname and IP address, I cannot launch the CUSM from dash board, but can launch from CiscoWorks.
        I think I did all necessary step of changing IP address and hostname, but I don’t know why I cannot launch from dashboard.
       Can someone guide me how to correct this issue ?
Kindly help me on this issue, thanks in advance.
Jason

Hi and welcome to Discussions,
have you any non-Apple BootCamp Drivers installed or replaced, like for the graphics card for example ?
If so, the uninstall them, either through the 'Software'-Panel in the Control Panel or in the case of graphics card drivers with DriverSweeper http://www.guru3d.com/category/driversweeper/
Also, a checkdisk run http://en.wikipedia.org/wiki/CHKDSK might be helpful.
Regards
Stefan

After upgrading my Aperture software, the adjustment tools don't work on most my projects. only a few. what happened?

Help... After upgrading, only SOME of my libraries allow the adjustments tools to work. What do I do to regain access that allows me to edit my photos?

I recall that from Aperture 2 to 3 the RAW decoder was updated and some of the adjustments required you to manually reprocess the RAW file using the new decoder. I don't remember the exact button but it appears on top with the RAW decode brick and says something like reprocess RAW. Once you do this, the new adjustments will work.
This only would matter if you are using RAW files.

HELP Linksys WRT300N v2 after Upgrade death

Similar Messages

Maybe you are looking for