Help on PO- BPM Integration!

Hello people!
Here I am again needing your knowledge of this suite. Im connecting my NWDS to the PO server and when I login into the server I can see this Iflow going from a legacy to the Integration Engine:
As you can see the Iflow ends with a SOAP Receiver channel pointing to http://.....:50000/bpm/demosapcom/opco/Start . I think this is the triggering of a BPM right? How is this address determined?
Then when I go to the Development Infrastructure perspective I see the following SC named ***_BPM with a object named opcont but I dont know how to see if that object is a BPM or what..
Basically I want to know how to go to the BPM that is called from the SOAP Receiver but going to the Dev Inf perspective doesnt help because i only see that opcont object. I also tried composite designer and process development perspective but they are empty.
Thanks a lot!

Thanks for your reply Harald!
Y saw the link you posted but as it described there, the url inthe reciever channel should be http(s)://<hostname>:<port>/MessagingSystem/receive/JPR/XI, but if you see the printscreen above, the receiver channel points to http(s)://<hostname>:<port>/bpm/demosapcom/opco/Start and I would like to where this url is pointing and how I can see that component.
In the second printscreen I am connected to the DTR but I only see what is in red. I double click in the opcont component but it does not open a BPM, only some properties and nothing more. How can I see that BPM that someone else has developed in that environment?
Thanks again!
Best Regards

Similar Messages

BPM Integration Process that correlates 2 messages.

I have an BPM Integration Process defined that collects Deliveries for an Order number and when an Invoice arrives for the same Order number it merges the messages to produce another file that is for a 3rd party.
I correctly receive in the Delivery and the Invoice u2013 I can see them in SXMB_MONI with a checkered flag and they are directed to my BPM. I can see this also in SXMB_MONI_BPE. I can also see the correlation correctly found in both messages. No error is reported by either SXBM.. transaction.
However it does nothing except receive the files u2013 I am expecting a transformation and then the send step to execute.
Start > CollectIDOCBlock > Collect Fork
Fork1
Infinite Loop for Receive Delivery (Start process) and Collect in Container. It uses and activates Correlation OrderNum
Fork2
Receive Invoice uses Correlation OrderNum (it does not activate the correlation)
At the end of the Fork (when Delivery collected and an Invoice is received)
It will then do the Transformation and Send Step.
<End
I have tried various combinations of the correlations and which receive step starts the process. Any ideas ?

Yes that did work. Now does somebody know what exactly the FORK parameter number of branches does ?
The SAPHelp is here
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
+You can specify the required number of branches and then define whether the process must run through all branches, or just a particular number of branches+
But it does not explain why you need to have 1 as necessary branches rather than 2. There are 2 branches in the FORK - so why does having 1 as the parameter work and not 2.
In this SAPHelp for Message-Dependent Loop
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
it indicates to me that the parameter should be 2.
BUT the SAP pattern (BpmPatternCollectMessage) I have used as a base for mine has this as 1 and not 2.
Why is 1 the correct value and not 2 ??

Question on BPM Integration Process

Hello Experts,
I am following this BPM article which is very similar to what I want to do.
We are using PI 7.1 without EP1.
I have an XML to IDoc scenario where my XML's external definition resides in a seperate SCV (SCV1) and my imported IDoc resides in a seperate SCV (SCV2). We did this to follow the Sender-Mapper-Receiver model. We have a different SCV for Mapping which holds MM and OM (SCV3). Now, I have my Abstract Service Interfaces for external definition in SCV1 and abstract interface for IDoc in SCV2. And, Integration Process in SCV1 (no good reason). But, now I am not able to access SCV2 abstract interfaces (IDoc abs) in my Integration Process since it sits in SCV1. I am thinking if I have to crate my external definitions, idoc, abstract service interfaces, MM, OM and Ingtration Process in one SCV instead of having them in three different SCVs. I was trying to follow sender-mapper-reciever model but seems like for BPM you need to have all your stuff in one SCV. Please help if you know how to resolve this issue wiithout getting rid of sender-mapper-receiver concept.
Thank you in advance for your help.
- Mayur

Thanks Jose. I think creating dependencies is a away to go. I also found this this where Stefan suggested same thing.
So, now Sender (SCV1) and Receiver (SCV3) have been added under Mapper (SCV2)'s dependencies list and I will have my BPM Integration Process in the SCV2 which will give me access to both sender and receiver abstract service interfaces.
Re: Software Component Dependencies PI 7.1
Thanks,
Mayur

BPM integration with BRM

Hi All,
I am looking for a blog for complete scenario which includes business rules used in BPM,that is ,complete STEP BY STEP blog for BPM integration with BRM.Searched a lot but finding either BPM or BRM or BRM already created without mentioning steps and imported in BPM process.
Can you help me with a complete blog for BPM integration with BRM STEP BY STEP blog?
Thanks in advance

Hi,
Please check if the below articles are useful
http://scn.sap.com/thread/3446620
http://scn.sap.com/docs/DOC-47066
http://scn.sap.com/docs/DOC-4588
Regards,
Sriram

BPM integration with BRM step by step

Hi All,
I am looking for a blog for complete scenario which includes business rules used in BPM,that is ,complete STEP BY STEP blog for BPM integration with BRM.Searched a lot but finding either BPM or BRM or BRM already created without mentioning steps and imported in BPM process.
Can you help me with a complete blog for BPM integration with BRM STEP BY STEP blog?
Thanks in advance

Hi,
Please check if the below articles are useful
http://scn.sap.com/thread/3446620
http://scn.sap.com/docs/DOC-47066
http://scn.sap.com/docs/DOC-4588
Regards,
Sriram

Rfc Jco communication channel error in BPM integration process

Hi,
when we are processing the records some records are processed succussfully some records does not in integration process view. when we restart the workflow we can able to process the error messages succussfully.
but here not understanding how to reprocesse automatically error messages in the BPM integration process level.
thanks and regads,
krushi.

Hi
re-submission of messages after corrections that were failed
Reconciliation of Messages in BPM
Reconciliation of Messages in BPM Contd. - Restart Workflow

How to use objects from other SWCs in my BPM Integration Scenario

Dear all,
I am experiencing some difficulties with the following. I have created a BPM Integration Scenario in a SWC. It contains a tranformation step in which a message from that SWC is split and mapped to two IDOCs. These IDOCs are imported in anothern SWC which I use for common objects. I have created Abstract Message Interfaces based on these IDOCs in this "COMMON" SWC, but the probIem is that I cannot use them in my scenario in the other SWC. Even though I have a usage dependency (Installation Time) created to the "COMMON" SWC.
Any suggestions would be much appreciated!!
Thanks in advance.
Will happily provide points for good answers.
Auke

Thus, I would have to copy/import all objects to the same SWC?
Or create a separate SWC for BPM Integration scenarios?
I have tried to create the Abstract Message Interface in the SWC and reference it to the IDOC structure in the "COMMON" SWC. This results in a reference to an invalid object during activation. Even though the defined usage dependency.
What's the standard solution?
Cheers,
Auke
Message was edited by:
A. Schotanus

BAM / BPM integration (11.1.1.2.0)

Hi all,
I'm trying to integrate 'BPM instances with BAM Reports.
I have done all the initial works (BAM credentials in application server, Clear DisableActions, Creating Business indicators, etc )
When I invoke the BPM incident from bpm/workspace it doesn't reflect in the BAM Reports. What will be the issue with this???
I have created the BAM data object inside the /Samples/Monitor Express folder.
I have no clear idea on how BPM data will map to the BAM fields.
My SOA version is 11.1.1.2.0 (PS2)
I'm able to integrate BPEL instances with BAM. And able to create BAM reports with values.
Thank You,
Edited by: Nir on Aug 21, 2012 2:03 AM

I have not tried this but had come across the steps to do so which people claimed should work -
1.     Verify that Monitor Express has been imported into BAM (Action may not be necessary):
The existing FMW_HOME/AS11gR1SOA/bam/samples/bam/monitorexpress/README.txt file details on importing Monitor Express samples.
2.     Enable BAM on the BPM Server via Enterprise Manager (Task 2: [Enable Oracle BAM on the Oracle BPM Server|http://docs.oracle.com/cd/E21764_01/integration.1111/e10226/bpmn_config.htm#CBDBIIID] )
3.     Enable Monitoring for the process via jdev.
Select the BPM Project -> Right click and select Project Preferences -> Process Analytics Summary -> Data Targets -> Enable BAM , Cubes ,
BAM Adapter JNDI Name -> eis/bam/rmi
Select "In Batch"
Data Object Path -> /Sample/MonitorExpress
4.     Redeploy your process.
Please update this thread if this works for you since others too will get help. Also check the BAM Forum btw.

BPM integration with UCM(universel Content Mgmt)

Hi,
I'm working with BPM , in my project there is a requirement.
to the human task there is a need to attach more than 2mb file.
i came to know that which is possible by integrating bpm with UCM repository.
could any one help me to integrate BPM with UCM.
Thanks and Regards,
Rajendar.

Hi Rajendar,
You can increase the maximum UCM file upload size and temporary storage size to 5mb by adding these additional parameters in your web.xml file:
<context-param>
    
    <param-name>oracle.adf.view.faces.UPLOAD_MAX_MEMORY</param-name>
    
    <param-value>512000</param-value>
</context-param>
<context-param>
    
    <param-name>oracle.adf.view.faces.UPLOAD_MAX_DISK_SPACE</param-name>
    
    <param-value>5120000</param-value>
</context-param>
<context-param>
    
    <param-name>oracle.adf.view.faces.UPLOAD_TEMP_DIR</param-name>
    
    <param-value>/tmp/ADFUploads/</param-value>
</context-param>Dan

Primevera & BPM Integration and Installation

Hi Experts,
Please help me with the installation of Primavera 6 V8.2 i have a working environment of BPM now how to install P6.I have followed the Admin guide but i was unable to install it properly.So plz any one who has completed the installation of Primavera and integrated with BPM 11g please share some link and snapshots.Will be helpful Please anyone help me out soon.
Thanks in Advance
Irfan Shaikh
Edited by: Irfan Shaikh on Apr 10, 2012 2:20 PM

If your company has a maintenance contract with Oracle, you should be able to find more information in the Knowledge Base.

ARIS - SAP BPM Integration

Hi Experts,
I am new to SAP BPM and ARIS, and was wondering if anyone can help answer this.
If processes are designed using ARIS, how would you import them in NWDS (BPM Process)? Is this the right way to do it? What is the best practice regarding this?
I know there is integration between ARIS and SolMan, but this is with SAP BPM. Any help would be appreciated.
Thanks,
Rahim.

From the wiki posted by Ann Rosenberg
Link: [http://wiki.sdn.sap.com/wiki/display/ModHandbook/ProcessModelingNotations]
It seems there is no way to import BPMN diagram from ARIS to NW BPM. One will have to redraw the models.
Rahim.

Please Help PI Data Dependent Integration Builder Authorizations NOT Workng

Dear Friends / Experts,
I had spend many days and explored all Weblog and links on this website and implemented all the steps required to acheive Data Dependent Integration Builder Security and I am not successful so far. I am just giving up now - Please Help Me ---
As I said, I already read all the important Forum Links and SAP Web links and Followed Each and Every Step - service.sap.com/instguidesNW04 ® Installation ® SAP XI
Security Requirement - Data Dependent/Object Level Authorizations in XI / PI
In distributed teams or in a shared PI environment it might be necessary to limit authorization for a developer or a group of developers to only one Software Component or objects within a Software Component or to specific Configuration Objects.
Our Environment - PI 7.0 SP 16
Created a new role in the Integration Builder Design
u2013Add Object Types of any Software Component and Namespace
- Enable usage of Integration Builder roles in Exchange Profile
Integration Builder u2013Integration Builder RepositoryParameter com.sap.aii.util.server.auth.activation to true
Assign users to the newly created Integration Builder roles
u2013Create dummy roles in Web AS ABAP, these roles are then available as groups in Web AS Java
u2013Assign users to these roles
u2013Assign the Integration Builder roles to the above groups in Web AS Java
u2013Assign unrestricted roles to Super Users
Please help - How to validate whether Data Dependent Authorizations are Activated?
I am working with XI Developers and Basis Team and we did updated all the Required Exchange profile parameters.
Per this Document - User Authorizations in Integration Builder Tools - Do we need to update the server.lockauth.activation in Exchange Profile. When We updated, It removed Edit Access from all XI Developers in PI
In both the Integration Repository and the Integration Directory, you can define more detailed authorizations that restrict access to design and configuration objects.
In both tools, you define such authorizations by choosing Tools ® User Roles from the menu bar. The authorization for this menu option is provided by role SAP_XI_ADMINISTRATOR_J2EE. Of course, this role should only be granted to a very restricted number of administrators. To activate these more detailed authorizations, you must set exchange profile parameter com.sap.aii.ib.server.lockauth.activation to true.
The access authorizations themselves can be defined at the object-type level only (possibly restricted by a selection path), where you can specify each access action either individually as Create, Modify, or Delete for each object type, or as an overall access granting all three access actions.
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/frameset.htm
I was able to control display and maintain access from ABAP Roles, but completely failed to implement Integration Builder Security?
Are there any ways to check Whether Data Dependent authorization or J2EE Authorizations are activated?
Thanks a lot
Satish

Hello,
so to give you status of our issue.
We were able to export missing business component .
But we also exported some interfaces after that and we had some return code 8, due to objects still present in change list on quality system (seems after previous failed transports , the change list was not cleared completley...).
So now we have checked that no objects is present in the change list of quality system and we plan to export again our devs on quality system.
Hope after that no more return code 8 during imports and all devs transported correctly on quality system.
Also recommending to read that, which is pretty good.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7078566c-72e0-2e10-2b8a-e10fcf8e1a3d?overridelayout=t…
Thanks all,
S.N

HELP! Form-Report integration problem!

Hi all, I have a problem in integrating report in dev10i. I used to use Dev6i and have no problem in using run_report_object in 6i. I have posted this in Report for few days but haven't got response.
I got the REP-0503 You did not specify the name of the report and FRM-40738 Argument 1 to builtin Report_Object_Status can not be null. The report run OK in report builder and I create the paper only layout. Also, I save the report as *.rdf and create a report object in form that point to this *.rdf file.
This is my PL/SQL code:
PROCEDURE P_PRINT_REPORT_OBJ(vc_reportoj Varchar2, vc_reportserver Varchar2, vc_runformat Varchar2) IS
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id := FIND_REPORT_OBJECT(vc_reportoj);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESFORMAT, vc_runformat);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_SERVER, vc_reportserver);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_OTHER, XXX='||:XXX.XXX||' paramform=no');
vc_ReportServerJob := RUN_REPORT_OBJECT(v_report_id);
vjob_id := substr(vc_ReportServerJob,length(vc_reportserver)+2,length(vc_ReportServerJob));
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
IF vc_rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||vjob_id||'?server='||vc_reportserver, '_blank');
ELSE
message('Report failed with error message '||vc_rep_status);
END IF;
END;
What gives? Do I miss something here? Do I have to set up other thing??? Also what is the name of report server in Dev10i? I am under impression that this is not needed so I put blank '' when I call this procedure in WHEN-BUTTON-PRESSED trigger like this:
P_PRINT_REPORT_OBJ('myreportobj','','HTML');

Hi all, I created simple report from 1 table and save it as *.rdf. I then make a simple form consisting 1 block and a button that have WHEN-BUTTON-PRESSED trigger that call P_PRINT_REPORT_OBJ. I create a report object in the form that point to my *.rdf report file and name the object MYREPORT. This time it gives Rep-0110 Can not open file '%n~<intangible character>' and REP-1170 Error while opening or saving a document. After that other message popup with REP-0110. It seems that FIND_REPORT_OBJECT could not find the file at all/giving the wrong filename as argument. Do I have crooked installation? I have tried it on 2 diff machine running XP2. Is this because of Win XP2? I have admin privilage user account for winXP2. Please help, this is not making a sense at all. I have no problem in Dev6i.
PROCEDURE P_PRINT_REPORT_OBJ IS
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
BEGIN
v_report_id := FIND_REPORT_OBJECT('MYREPORT');
vc_ReportServerJob := RUN_REPORT_OBJECT(v_report_id);
END;

Need help with Desktop Office Integration (DOI)

Hi all,
i need help to read an Excelsheet into an int. table.
Its the first time, that i use the SAP DOI. I copy different coding into my Report to get connection to an existing Excelsheet.
Here is my Coding:
* first get the SAP DOI i_oi_container_control interface
CALL METHOD c_oi_container_control_creator=>get_container_control
                    IMPORTING control = gr_control
                              error   = gr_errors.
APPEND gr_errors.
* create a control container as defined in dynpro 100
CREATE OBJECT gr_container
            EXPORTING container_name = 'CONTAINER'.
* initialize the SAP DOI Container, tell it to run in the container
* specified above and tell it to run Excel in-place
CALL METHOD gr_control->init_control
    EXPORTING
      r3_application_name      =    'Data'
      inplace_enabled          = ' '
      inplace_scroll_documents = 'X'
      parent                   = gr_container
      register_on_close_event = 'X'
      register_on_custom_event = 'X'
      no_flush                 = 'X'
    IMPORTING
      error                    = gr_errors.
* save error object in collection
APPEND gr_errors.
* ask the SAP DOI container for a i_oi_document_proxy for Excel
CALL METHOD gr_control->get_document_proxy
                       EXPORTING document_type = 'Excel.Sheet'
*                       EXPORTING document_type = 'Word.Document'
                                no_flush = 'X'
*                                REGISTER_CONTAINER = 'X'
                      IMPORTING document_proxy = gr_document
                                error          = gr_errors.
APPEND gr_errors.
Then i open the Document from lokal PC.
CALL METHOD gr_document->open_document
      EXPORTING
*      document_title   = ld_filenc
        document_url     = ld_verzc
*      NO_FLUSH         = ' '
*      OPEN_INPLACE     = ' '
*      open_readonly    = ' '
*      PROTECT_DOCUMENT = ' '
*      STARTUP_MACRO    = ''
*      USER_INFO        =
*      ONSAVE_MACRO     =
      IMPORTING
        error            = gr_errors
*      RETCODE          =
APPEND gr_errors.
Now i start the spreadsheet interface:
*...check if our document proxy can serve a spreadsheet interface data:
DATA: pd_has TYPE i.
CALL METHOD gr_document->has_spreadsheet_interface
                    EXPORTING no_flush = 'X'
                    IMPORTING is_available = pd_has
                              error = gr_errors.
APPEND gr_errors.
CALL METHOD gr_document->get_spreadsheet_interface
                    EXPORTING no_flush = ' '
                    IMPORTING
                              sheet_interface = gr_spreadsheet
                              error = gr_errors.
APPEND gr_errors.
* now loop through error collection because
* Get_spreadsheet_interface flushed and synchronized
* the automation queue !
LOOP AT gr_errors.
    CALL METHOD gr_errors->raise_message
                    EXPORTING type     = 'I'
                    EXCEPTIONS message_raised = 1
                               OTHERS         = 2.
    IF sy-subrc = 1.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      pd_kz_fehler = 'X'.
      EXIT.
    ENDIF.
ENDLOOP.
FREE gr_errors.
Ok, now i can open a Excelsheet, and i can mark a range in the sheet
rows is a constant.
CALL METHOD gr_spreadsheet->set_selection
      EXPORTING
        left     = 1
        top      = 2
        rows     = rows
        columns = 18
*    NO_FLUSH = ' '
*    UPDATING = -1
    IMPORTING
      error    = gr_errors
*    RETCODE =
my first problem: Excel is really open, and the user can see the sheet. I dont want, that excel is visible...is there a way to start excel in no_visible mode?
second problem: The sheet have makro aktiv...at start from excel, there is a popup, which ask 'makros activate' oder not activate... i dont want this popup... is there a way, to say it from abap, that makros always active?
third problem: i see, that the content Table have this components:
TYPES: BEGIN OF SOI_GENERIC_ITEM,
         ROW(4) TYPE C,
         COLUMN(4) TYPE C,
         VALUE(256) TYPE C,
       END OF SOI_GENERIC_ITEM.
But my excelsheet have more then 10000 lines....
forth (and biggest) problem: i need the selected data into an int. tabelle. The table have the components:
ROW
COL
VALUE
i dont know, how can i do this...
please help me
Sorry for my bad english.
Greetings
Markus

Hi,
May be this link is useful
/people/thomas.jung3/blog/2005/05/11/using-classic-activex-controls-in-the-abap-control-framework
Also Check out report SAPRDEMOEXCELINTEGRATION2.
check the links
http://www.esnips.com/doc/741a848e-f49a-4436-bec4-e21950f6c94c/desktop-office-integration.pdf
http://www.esnips.com/doc/2080a9ec-64f9-49c4-bd03-d9f56bc2437c/MSWord--Excel-with-ABAP.pdf
Regards,
Raj.

Help on FRM-41211 Integration error: SSL failure running another product.

Am getting the above error, whenever I run my interface form calling a Report module.
What's baffling though is - this only happens during the initial call to the RUN_PRODUCT built-in. That is, after acknowledging the Form error, the Reports Background Engine is displayed, then everything would seem to be work after that.
Could this be a bug or is there a run-around to this?
Thanks a lot for your ideas and help.

We were getting this error on windows98 machines if someone had opened wordpad or some other unrelated application before running a report after they booted the machine. We solved the problem by forcing the reports backgroup engine to run at startup to prevent this error.
HOST (
'start /m RWRBE60.exe ',
no_screen); -- START BACKGROUND ENGINE TO PREVENT SSL INTEGRATION ERROR

Help on PO- BPM Integration!

Similar Messages

Maybe you are looking for