Help - Weblogic 6.1 fails to start after SP6 install
After sucessful installation of SP6 for Weblogic 6.1, weblogic fails to start. After inspecting the logs, I discovered the following message:
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.SecurityService.initializeSuid(SecurityService.java:432)
at weblogic.security.SecurityService.initialize(SecurityService.java:120)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:421)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:213)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
please check article-ID [825933.1]
Grid Control Agent Startup Fails on AIX Server due to Invalid Timezone Setting at the OS [ID 825933.1]
in MOS...
HTH
Edited by: VivaLaVida on 31.05.2011 07:48
Similar Messages
-
Oracle AS - DB Console fails to start after AS install
Hi,
I got an error message at the time of Oracle AS Infra install that setup failed to start the DB Console during DB Configuration assistant run. Also, Oracle AS - DB Console fails to start after the AS install? Any suggestion / remedies would be of help.hi,
follow this metalink note you will find out the answer
Troubleshooting Database Control Startup Issues
Doc ID: Note:549079.1
Thanks, -
WebLogic Admin server fails to start after reboot
Hi Gurus,
Weblogic Admin server won't start up after a server reboot. Note that weblogic was gracefully shutdown before the restart.
Also note that the following files were accidentally deleted after the reboot (but I don't think that should cause an issue..):
/opt/shared/apps/hyperion/Oracle/Middleware/user_projects/domains/EPMSystem/servers/AdminServer/data/store/default/_WLS_ADMINSERVER000000.DAT
/opt/shared/apps/hyperion/Oracle/Middleware/user_projects/domains/EPMSystem/servers/AdminServer/data/store/diagnostics/WLS_DIAGNOSTICS000000.DAT
Looking at the AdminServer.log:
*####<Oct 11, 2012 11:27:53 AM EDT> <Critical> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969273846> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: weblogic.management.provider.EditFailedException:*
java.lang.AssertionError: weblogic.management.provider.EditFailedException:
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.<init>(DomainRuntimeServiceMBeanImpl.java:79)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.getInstance(DomainRuntimeServiceMBeanImpl.java:68)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
at weblogic.management.deploy.internal.DeploymentManagerImpl.<init>(DeploymentManagerImpl.java:83)
at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: weblogic.management.provider.EditFailedException:
at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1754)
at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.<init>(DomainRuntimeServiceMBeanImpl.java:76)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.getInstance(DomainRuntimeServiceMBeanImpl.java:68)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
at weblogic.management.deploy.internal.DeploymentManagerImpl.<init>(DeploymentManagerImpl.java:83)
at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: org.xml.sax.SAXParseException: Premature end of file.
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:195)
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:174)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:388)
at com.sun.org.apache.xerces.internal.impl.XMLScanner.reportFatalError(XMLScanner.java:1414)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$PrologDriver.next(XMLDocumentScannerImpl.java:1059)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648)
at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScannerImpl.java:140)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:511)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:808)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:235)
at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:284)
at weblogic.xml.jaxp.RegistryDocumentBuilder.parse(RegistryDocumentBuilder.java:163)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
at weblogic.management.provider.internal.ConfigReader.convert(ConfigReader.java:106)
at weblogic.management.provider.internal.ConfigReader.<init>(ConfigReader.java:70)
at weblogic.management.provider.internal.ConfigReader.<init>(ConfigReader.java:64)
at weblogic.management.provider.internal.EditAccessImpl.loadBeanTree(EditAccessImpl.java:1917)
at weblogic.management.provider.internal.EditAccessImpl.loadBeanTreeFromPending(EditAccessImpl.java:1807)
at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1740)
at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.<init>(DomainRuntimeServiceMBeanImpl.java:76)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.getInstance(DomainRuntimeServiceMBeanImpl.java:68)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
at weblogic.management.deploy.internal.DeploymentManagerImpl.<init>(DeploymentManagerImpl.java:81)
at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:232)
at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:154)
at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:26)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
####<Oct 11, 2012 11:27:54 AM EDT> <Notice> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274051> <BEA-000365> <Server state changed to FAILED>
####<Oct 11, 2012 11:27:54 AM EDT> <Error> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274053> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Oct 11, 2012 11:27:54 AM EDT> <Notice> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274069> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMX> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274138> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.domainruntime .>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMX> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274140> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.edit .>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMX> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274141> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.runtime .>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <WebService> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274146> <BEA-220028> <Web Service reliable agents are suspended.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <WebService> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274153> <BEA-220029> <Web Service reliable agents are shut down.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <MessagingBridge> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274318> <BEA-200001> <The messaging bridge service has successfully shut down.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMS> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274426> <BEA-040308> <JMS service is suspending.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMS> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274506> <BEA-040107> <Undeployed 8 default connection factories.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMS> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274510> <BEA-040015> <JMS shutdown is complete.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JDBC> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274530> <BEA-001144> <Force Suspending the JDBC service.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JDBC> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274536> <BEA-001146> <Force suspend of the JDBC service completed.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JDBC> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274538> <BEA-001147> <Shutting down the JDBC service.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JDBC> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274552> <BEA-001149> <Shutdown of the JDBC service completed.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274694> <BEA-000236> <Stopping execute threads.>
Kindly guide me with this. Thanks!
Edited by: Kent Pawar. on Oct 11, 2012 8:51 AMIssue is :
Caused By: weblogic.management.provider.EditFailedException:
One probable reason can be some change made to the config.xml file . If you have previous backup for the config.xml file then try to replace the config.xml file and restart the server .
Another reason for this exception may be that there were some changes made to configuration through the Admin Console which were not activated completely and Admin Server was restarted . under this scenario weblogic will create a /pendig dir and have a config.xml file created there with the un-activated changes .
some workaround you can try to restore the Admin Server :
Under domain dir ,
\pending directory -- take backup and delete the dir .
Under Admin Server Dir :
data\store --- take backup and delete the dir .
thanks,
Sandeep -
Hal failing to start after fresh install of gnome
Hello, im fairly new to Arch, and i just got everything working and just installed gnome desktop.
Well i went to go restart HAL so i could startx and got this error
EXT3-fs error (device sda3): read_block_bitmap FAIL
Is there something i should change or get rid of to get hal to start.
When i do /etc/rc,d/hal start i get this
EXT3-fs error (device sda3) : read_block_bitmap: Cannot read block bitmap - block_group = 14. block_bitmap = 458752
Any help is much appreciatedThis looks like a hardware issue. Maybe an "fsck" will fix this...
-
How can I restart a mac pro that shows only a grey screen with a spinning wheel. I reinstalled snow leopard (10.6.3) over 10.6.8 because apple genious people said I had problems with my library files after a time capsule crash. I reinstalled but when done I got only a blue screen. I restarted with the power button and tried to insall 10.6 combined upgrades. I got an error message that it could not install because of an error. When I powered down and tried to restart, I get only a grey screen. My optical drive does not open so I can't restart from another source.
Restart, holding down the mouse button. That should eject the disc. Zap the PRAM and Reset the SMC. Then, pop in the install disc, restart with it in again, select your language, and, when the menu bar pops up, select Disk Utility from the Utilities menu. select the boot volume and repair the disk.
-
ColdFusion 8 Fails to start after update Java for Mac OSX 10.5 Update 4
I have been using ColdFusion on a Mac for years. Now CF fails to start after I updated Java for Mac OS X 10.5 Update 4. I usually start by typing in the terminal window sudo /Applications/ColdFusion8/bin/ColdFusion start.
There is a crash report but I don't know how to read it. See attached.
Please help, I need this working for my job.
Thanks...ColinDear Craig,
Macbook Pro 2.4GHz Intel Core 2 Duo 4 GB RAM
I'm sure that this is 64-bit
CF 8.0.1 Enterprise Build 3080
I had moved the Java SE 6 to the top in both Plugin and Applications. The
correct version is showing in the terminal window. See below.
Last login: Thu Jun 18 11:27:09 on ttys001
Beta-4:~ Colin$ java -version
java version "1.6.0_13"
Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
Beta-4:~ Colin$
CF will not start. I have the activity monitor open, and when I start CF you
see it in the activity monitor for a few seconds as it starts up. When the
message process is completed in the terminal window CF disappears in the
activity monitor.
Any suggestions?
C
Hi, Colin,
My apologies but I forgot to ask 2 questions: (1) What kind of Mac you have
(Intel or PowerPC)? (2) What version of CF are you running and what installer
did you choose (8 or 8.0.1, 32-bit, 64-bit, etc.)?
To start, try the following:
1. Normally you'd shut CF down first ... but that's not necessary for you
2. Open Java Preferences again
3. Select Java SE 6 and move it (drag) to the top spot in both section (Applet
Plugin and Applications)
4. Open Terminal
5. Type java -version (you should see 1.6.0_13 as the new version)
6. Try to start CF again
This may not work (I've had issues with it) but it's technically how it's
supposed to work. With the Java Preferences utility, you're visually setting a
default JVM (you can do it with commands in Terminal but this is much faster
and easier).
If CF still won't start, look for the jvm.config file in your CF application
folder (try /Applications/ColdFusion8/bin or
/Applications/ColdFusion8/runtime/bin -- the latter is where a jvm.config file
is on my machine for a particular version of CF that's installed similar to
yours). You can override the JVM in this file but, hopefully, that won't be
necessary!
Best,
Craig -
My ITunes library failed to start after an upgrade, now I'm unable to open or re-install. Receive an error message stating that "apple mobile device failed to start, check to see that you have sufficient priveleges to run system". Any help with this? I've tried un-installing and downloading only to get the same message again.
Thank you to "turingtest2", solution for someone else worked for me as well!
-
Multiple Oracle Homes - Oracle Listener failes to start after installation
Just in case the listener fails to start after an oracle installation, please check the oracle ports in the listener.ora and tnsnames.ora, both of which are present in the following directory:
...\oracle\<SID>\<Ver>\NETWORK\ADMIN
All installations should have separate listener ports eg. If the first installation has port 1527, the next one should be 1528 and so on..
If they do not, manually change the ports and start the listeners.
Also check SAP Note 98252. Although I didn't find it necessary (I think it applies only if you have a single listener for all oracle homes), it did give me an idea that there some config problem in the .ora files.
Also see [this thread|Oracle Listener error in Import ABAP phase?; for related detailshi
thanks for the help ,
I have been using the SQL Server , i am totally blank about Oracle
i am totally confused with this user, and hoststring
i logged in to the enterprise manager using System and manager password
But i cannot connect to any database using SQL Server
i am not remembering any user name or password i have given during installation.
the only thing i remember is
Global databasename = (globedb) i have given
For SID = globedb the same name i have given
for sys ,i have given sysdb as password
and for system i have given systemdb as password
with this can i do anything
when expand the schemas ,i can see the XDB,SCOTT and SYS . how can i login to this .
if i want to login to the scott
what would be the username,password,and hoststring. since i haven't set any password and username ,there would be some default username ,password, and hoststring.
if any one can help me please help me
thanks regards -
Imovie 11 failing to start after 10.6.5 update (same issue with iphoto)
Hi,
My imovie 11 is now failing to start after 10.6.5 update, I reinstalled ilife and it's still failing.
Same issue for iphoto .
Help
Benoithelp help help. imovie 11 works fine until i populate iphoto with any photos what so ever then it just fails to kick off after looking for new video from iphoto. works fine again when i delete the iphoto libary but i don,t want to do this each time i want to use imovie.....very disapointed
-
when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. suggestions??
i have also tried facetiming with several other people. the same thing has hapened every single time and it has always worked just fine until that 800 number called me.Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
http://www.apple.com/support/systemstatus/ -
Cluster group on node B (app1) failed to start after applied win2003 SP2
Hi,
i followed microsoft kb174799 to apply SP2 on both ms-cluster nodes namely DB/APP1. SAP-R/3 cluster group on node B (APP1) failed to start after i did step 13
Thanks & Regards,
KelvinHello,
Did you follow the procedures from note 985137 to apply the SP2
Please check procedure in this note.
985137 Service Pack Installation for SQL Server 2005
regards,
John Feely -
This started after I installed the newest update. All the files that are needed are there. I just updated Quicktime to see if that would work, but it didn't. I looked through some other discussions like this, and found out that all of my files are correct. Some people are saying that they needed to remove Filebot, but I can't find that on my computer. Help, please?
This started after I installed the newest update. All the files that are needed are there. I just updated Quicktime to see if that would work, but it didn't. I looked through some other discussions like this, and found out that all of my files are correct. Some people are saying that they needed to remove Filebot, but I can't find that on my computer. Help, please?
-
Safari wont start after i installed avi player any suggestions?
safari wont start after i installed a avi player any suggestions?
You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
I can't open iPhoto anymore because "it may be damaged or incomplete"? I'd been making folders of my albums & videos & moving them to an external hard drive. I have years of photo's & video still on iPhoto that I had not moved to the external hard drive yet. This problem started after I installed iDvd so I uninstalled it. Also tried to download older iPhoto updates to see if that would resolve the problem. No change - what do I try next?
1. Back up:
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
2. Reinstall:
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
Hi,
I performed an in-place upgrade on a 64 bit windows box from 11.1.1.5 to 11.1.1.6.
Installation was complete without any errors. Also, the RCU is upgraded.
When i start the weblogic server, it throws the following error:
at weblogic.t3.srvr.BootService.start(BootService.java:55)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesM
ager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerSe
icesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
at weblogic.Server.main(Server.java:71)
>
The WebLogic Server encountered a critical failure
Reason: Assertion violated
Exception in thread "main" java.lang.NoClassDefFoundError: Could not initializ
class weblogic.protocol.ServerIdentityManager$Initializer
at weblogic.protocol.ServerIdentityManager.findServerIdentity(ServerId
tityManager.java:64)
at weblogic.protocol.URLManager.findAdministrationURL(URLManager.java:
3)
at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote
erverLifeCycleRuntime.java:1078)
at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime
ava:431)
at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:41
at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:206)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:482)
at weblogic.Server.main(Server.java:71)
Appreciate you help in resolving this.
Thanks,
VineethHi,
after upgrade did you rebooted your pc? try to reboot and double confirm below steps,
1) Once complete obiee11gv6 product installer
2) you need to run psa.cmd run as administrator (the two schema need to be upgraded :MDS & BIPLATFORM)
3) upgradenonj2eeapp.bat need complete for more refer my blog
http://obieeelegant.blogspot.com/2012/07/in-place-upgrading-of-obiee-111150-to.html
Thanks
Deva
Maybe you are looking for
-
Can't get mail to stop correcting spelling
This has changed recently. I have set Spellchecking in Mail > Preferences to Never but it still corrects what it thinks are mistakes as I press space after a word. For example, ppi (pixels per inch) is always changed to pip. I know that CMND + ; will
-
Can't remove a user defined field with DI API.
Hi, I'm using the code below to remove a user field. However, the first time I run it, I get the message that: "Ref count for this object is higher then 0" The second time I run it, I get the message that: "No matching records found (ODBC -2028)" As
-
Image storing algorithm at photo album sites
Hi there; I am coding a image storeing website... Photo albums etc.But storing them in a folder system is getting complex for me... Whats the best way of storing image to folders? What i did up to now is: every member has its own main folder named wi
-
How to get datatype and label of columns in a record group
Hi all, I need to create a generic block which displays data of any query. For this, I was thinking at runtime I'll create a recordgroup. For this I was hoping to get the datatypes and label of various columns in the records. Please help me in this r
-
CJ20N: handle Z table's related to project and wbs element
Hi there, The requirement is to handle Z table for project and wbs element. Example: ZTAB1 has fields: pspnr | field1 | field2 (for projects) ZTAB2 has fields: pspnr | field3 | field4 (for wbs element) I found an enhancement that can read z table int