History - recent history -time range not showing

Hi i have a problem with clearing my recent history.
The problem is my time range to clear is buged and not showing.
I tried with reinstalling firefox and clearing all settings but it didn't help.
So i decided to write here for some help.
Thanks

I've installed the Bulgarian Firefox version and I see the same small Clear Recent History window.
The DOM Inspector shows a width of 14em and that is really too small compared to what I get with the en-US version (width: 34em).
Add code to the userChrome.css file below the default @namespace line to increase the default width.
*http://kb.mozillazine.org/userChrome.css
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#SanitizeDialog {width: 34em !important;}</nowiki></pre>
See:
*view-source:chrome://browser/locale/sanitize.dtd
Sounds that something got wrong here and maybe a bug should be filed:
<pre><nowiki><!-- LOCALIZATION NOTE (dialog.width2): width of the Clear Recent History and
Clear History on Shutdown dialogs. Should be large enough to contain
the item* strings above on a single line. The column width should be set
at half of the dialog width. -->
<!ENTITY dialog.width2 "14em"> (shouldn't this be at least 28em ?)
<!ENTITY column.width2 "14em"></nowiki></pre>
The sanitize.dtd in the en-US locale:
<pre><nowiki><!-- LOCALIZATION NOTE (dialog.width2): width of the Clear Recent History and
Clear History on Shutdown dialogs. Should be large enough to contain
the item* strings above on a single line. The column width should be set
at half of the dialog width. -->
<!ENTITY dialog.width2 "34em">
<!ENTITY column.width2 "17em"></nowiki></pre>

Similar Messages

  • HT5731 I have an iPhone 4S and when I sync it, the "purchased" and "recently added" playlists do not show up on my phone.

    I have an iPhone 4S and when I sync it, the "purchased" and "recently added" playlists do not show up on my phone. For some reason I can't get all the playlists I have set up in iTunes to show up on my phone. 

    Hi HipstaTrinty,
    Welcome to the Support Communities!
    The article below may be able to help you with this.  Click on the link to see more details and screenshots. 
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Cheers,
    - Judy

  • I upgraded to a 4g and the most recent backup (today) is not showing up.  I went ahead and backed up and found that my texts, phone calls and messages did not backup.

    I upgraded to a 4g and the most recent backup (today) is not showing up.  The most recent backup that showed was 3/3/12.  I went ahead and backed up to that date and found that my texts, phone calls and messages are the part that did not backup. 
    Can anyone tell me 1) why my most recent backup did not show in ITunes, 2) why I could not backup using the Cloud (I tried this way first), 3) how I can get all the phone calls, messages and texts from 3/3/12 until today?  Please help if you can...thanks!

    I found the answer on:
    transferring Txt messages from old phone to new iphone 4
    It worked great!

  • Most recently uploaded iphoto videos not showing up in imovie

    when i try to use iphoto videos in my imovie project, the most recently uploaded videos do not show up.
    this has happened to me before, and i got around the issue by importing the original video files (through finder) into imovie. the clips that weren't showing up eventually did show up, long after i needed them.
    so, here i am again, trying to edit recently uploaded clips that aren't showing up. i tried closing iphoto and imovie, then opening them again. no luck. has anyone else had this probleml? why won't the most recently uploaded videos show up for days after they've been uploaded? i could import the files through finder, like i have in the past, but that takes up extra hard drive space, and takes way too long. i was under the impression that the ilife apps are supposed to just work with each other... intuitively and such
    everything is up to date. here's my specs:
    MacBook Pro - 13-inch, mid 2010
    OS X 10.8.2 (12C60)
    iPhoto '11 - version 9.4.2 (710.42)
    iMovie '11 - version 9.0.8 (1778)
    the videos were recorded on an iphone 5

    Usually any videos in iPhoto appear in iMovie '09 in the item "iPhoto Videos" at the top of the listing in the iMovie Events browser. Clicking on this item (heading) reveals the video thumbnails to the right of the Events listing. However, I've noticed that my old 3gp videos from an earlier mobile phone don't show up in the Events, whereas some other formats do (for example, avi).
    MPEG Streamclip will convert 3gp files to a suitable format for import to iMovie. I'm not sure if it will handle 3g2. In MPEG Streamclip, navigate to your movie and open it, or simply drag it into the workspace. Now export it as a QuickTime movie (.mov) in the format AIC (Apple Intermediate Codec) or H.264. The default settings for these formats should be OK. Both these formats work well with iMovie. I just tested a 3gp movie, exported from MPEG Streamclip as AIC - this worked perfectly with iMovie.
    To import in iMovie go to File>Import - Movies, then navigate to your movie.
    You can download the free MPEG Streamclip here:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    PS After posting this, I realised that you can also export as AIC or H.264 from QuickTime 7.6.6 (although I do have the pro version - not sure if you need that). In QT go to File>Export and select Movie to QuickTime Movie then choose Options and select the format.
    John
    Message was edited by: John Cogdell - added PS

  • Why date and time do not show as links in some email message in 4s?

    why date and time do not show as links in some email message in 4s?

    To add it back, tap the Edit button at the top of the list of mailboxes and select the missing email account so that it has a tick against it (you can also change their order in the list by dragging the parallel line icon to an account's right), tapping Done should then get it to show in the list

  • I just get my new I pophone 4s and the icon for the face time is not showing in the screen

    I just get my new I pophone 4s and the icon for the face time is not showing in the screen

    There is no separate icon for FaceTime. You access it through contacts. Go into the contact you want to call and tap the FaceTime button.

  • Time capsule not showing in airport utility? recently moved house and new internet set up!

    Hi
    I had a time capsule set up and working perfectly then we moved house, changed ISP and now time capsule light is flashing amber.  When I open the Airport Utility only the internet (i.e. a globe) shows, no time capsule.  My Macbook Pro has no ethernet port or I would have tried hardwiring!  I can enter the time machine but back up history is red.
    I read that latest OS may require a rename of the capsule if the original name was long (29 characters including spaces at present) but to change it the support says to access it via the airport utiltiy which I can't do!
    Help anyone?!
    Sam

    Simply factory reset the TC and start over.
    Any time you move the network configuration the TC will require a new configuration.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • Interaction history in ICWC not showing dates

    Hi,
    The interaction history in ICWC(CRM 5.0,SP8) is not showing the date of the interactions viz., service ticket, interaction record. Is there any setting to be done for this? Please guide.
    Shridhar

    hi,
    try this
    IMG>CRM>Master data >BP>Accounts and Contact Persons in the Portal-->Specify Display Options for Interaction History/Activities/Opportunities
    Select the area as -
    SAP_CRM_CUST_INTERACT_CENTER or your relevant area
    and make the settings for interaction history. you should be able to se the Fact sheet details with dates
    Cheers!
    Please reward if helpful
    Raj

  • Time Capsule not showing up in finder

    I have a new TB TC and I had a failure the first time trying to back up. I then noticed when I restarted the backup the ata speed was very slow over a 100baseT network connection. It finally finished and then did a bunch of backups during the day but the disk was not showing up in the finder. When I would manually start the backup the disk would show up in the finder window but as soon as it was done it would disappear. It did this for a while then I had a serious problem where time machine could not find the TC at all. I had to reboot the machine. It now seems to be ok after the reboot but I am wondering about the stability of the TC. Has anyone had similar problems or offer any fixes. Its connected to a brand new Imac

    Did you try the reset button on the back?
    To reset the Time Capsule password:
    Use something pointed to press and hold the reset button for one (1) second.
    Important: If you hold the reset button for more than one second, you may lose your network settings.

  • Defined Named Ranges Not Showing in Publish Options

    Greetings,
    First off I have:
    - 1 workbook with:
      - 10 worksheets with data transpoosed in different manners
      - 7 worksheets with charts and named ranges for each worksheet
    The 5 chart worksheets have charts based on data directly from the 5 data worksheets. Each chart worksheet contains about 5 uniques charts.
    There are separate named ranges defined within each chart worksheet that should encompass each of the different groups of charts on their respective worksheet. The probem I am having is that of the 7 named ranges I have defined only 4 of them show in the
    Publish Options when I try to Save & Send the workbook tyo SharePoint. There isn't anything special about the 4 named ranges that show nor is there anything special about the named ranges that don't show.  I have tried many different things to
    get the named ranges to appear but they won't. I can publish all of the graphs withing the named ranges individually but that's not an ideal way to maintain them going forward. Any ideas on where to look to see why the named ranges are being excluded?
    TIA,
    MP
    I have been able to define named ranges for
    I am having an isssue where I hav

    Today, I tried it again and now I could see the Name range under Browser View Options list, this is my step as below:
    1. Type the value in Cell A1 to B4. (Same as the screenshot as the last reply)
    2. Directly type Test in Name Box.
    3. Go to File > Info > Browser View options > Items in the Workbook.
    Now the Name is appearing.
    But when we define a name to a blank range, we would not see the Name in the Browser View options anymore. Try in your site.
    By the way, My using version is Office 36 ProPlus, version 15.0.4551.1005.
    Cheers,
    Tony Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please contact
    [email protected]

  • Real-Time does not show up as an add-in under NI Max after installing

    We are trying to re-install Labview 7.1 Real-Time on a Windows 2K
    PC.  I insert the Real-Time disk and it completes
    installation.  After a Reboot, I check under
    Softaware/LabView/Addins and it does not show up.  It also does
    not show up as a target option when I start labview.  It worked
    before applying the latest RIO patch.  After the patch, we
    uninstalled all the Real-Time stuff via the Control Panel/National
    Instruments Uninstall (apparently, the uninstall from the RT CD does
    not actually uninstall anything)  We rebooted a directed after
    uninstalling.  Then we reinstalled RT, rebooted, and nothing shows
    up for it.  It seems like something is screwed up in the registry
    or something.  Can anyone help!!!!
    Thanks,
    Chris

    It may be best to clean your registry after uninstalling everything.
    This is a relatively extreme step, but after this you should be able to
    install (first LabVIEW, then any DAQ, then any add-ons and toolkits)
    and see everything in the right place.
    After uninstalling:
    Remove the following registry components from the Windows Registry:
    HKEY_CURRENT_USER\Software\National Instruments Delete the entire tree!
    HKEY_LOCAL_MACHINE\Software\National Instruments Delete the entire tree!
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ , \ISA, or \PCMCIA and delete registry entries containing any keys with 1093 in them.
    Do not worry if any of these trees are not listed.
    Richard
    Richard
    Field Sales Engineer, New Jersey
    National Instruments

  • Ipad Usage time does not show

    I have just fully charged my ipad 4 but the usage time since last full charged is not showing anything. How can I get it to show the usage time?

    brodeuga wrote:
    Time no longer displays on DVR box. Please explain how to correct.You may just need to reboot the DVR...  pull power, wait 20 seonds, then plig back in....  see if that brings your clock back online.

  • My recent podcast episode is not showing up.

    I recently submitted my xml file with a new episode and its not showing up, it usually shows up within a few hours and it has been over 2 days. I went over every parameter and cant find a problem. Its podcast #8 if that is of any help, called "Recapturing the Future".

    dreamersempire wrote:
    I left off a tag, I'm sure this will fix it.
    Almost certainly: if it doesn't, please do post back, but do include your feed and Store URLs.

  • Time Capsule not Showing in Airport Utility

    I decided to re-set my Time Capsule this afternoon. The green light is on but it is not showing in the Airport Utility and Time Machine says there is no back up disc available.
    What can I do?

    Temporarily, connect a spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule.
    Restart both your Mac and the Time Capsule and then open AirPort Utility to see if your Time Capsule has been found.
    If the Time Capsule is still lost, disconnect the Ethernet cable and perform a Factory Default Reset on the Time Capsule as follows:
    Pulll the power cord from the back of the Time Capsule
    Wait a few minutes
    Hold in the reset button and keep holding it in while you plug the power cord back in to the Time Capsule
    Keep holding the reset button an additional 8-10 seconds and then release the button
    Allow 30-40 seconds for the Time Capsule to restart to a slow, blinking amber light
    Connect the spare Ethernet cable from your computer to one of the LAN <-> ports and open AirPort Utility to reconfigure the device

  • Time capsule not showing old backups

    i bought the time capsule in the middle of october and set it up.  but when i got into the time machine to find the old backups it only shows the oldest back up as november 13th, and each day it moves to the next. ex tomorrow it will show the oldest as november 14th. and when i look at the time capsule i have only used 1.96 of the total 2 TB.  the "tick" marks on the side of the time machine dont always show the pink, which means it was backed up to the time capsule. it shows grey marks saying it was saved on the mac(as if i was not connected to the time capsule)

    I'm using the Time Machine interface from the original icon in the dock.
    I figured it out. Just a minute ago I went to Time Machine, it mounted the backup and showed it on my desktop but when the "space" view came I wasn't able to browse anything. It didn't show any dates. I exited Time Machine and immediately went back and now I was able to browse all the backups and all the backup dates were shown. I tried it later and again I couldn't browse my backups. This time I waited and finally they showed up and everything worked. It just seemed to take a long time for the backups to be browseable.

Maybe you are looking for

  • How do I enter 4 digit passcode in itunes using remote app

    My Apple TV is out of sync with my iPhones and iPad. I was trying to add new phone with the remote app and turned off and back on home sharing trying to find where to enter that 4 digit passcode the app gives on each devioce when you select Add an iT

  • Macbook pro(2008 later) can not recognise external monitor(NEC UXI2090) with mini-DP to DVI adapter with 9600GT

    I bought mini-DP to DVI frome Apple several monthes ago and it worked well in that time until yesterday the external monitor show me no signal sign. Other PCs were connected with the same cable and monitor and they are fine. I am wondering there is s

  • Crystal Report print layout error during print preview

    Hi Everyone, When I try print preview a marketing document, it will work the first time, and then when I try to print preview again it brings up a window asking me to login into the database with the sa username and password. When putting in the corr

  • Can't open Palm program

    My Palm software was corrupted? when I was trying to fix another problem.  First, my calendar was blank except for repeat dates and the contacts were missing info.  I preformed restore a couple of times.  Now I can't open Palm at all.  I did find fil

  • Duplicate entries in calendar and contacts

    I have many duplicate entries in my calendar and my contacts.  Deleting each one on my Z10 is very time consuming.  Is there a way to do this more efficiently, such as viewing the calendar and the contacts as a file on my computer, where editing woul