Holder of two positions, reporting to multiple managers in Travel managemen

Dear Consultants,
Our configuration is as follows:
We have implemented Travel Management in our organization.
A Person is assigned %70 capacity of Position A, and is assigned %30 capacity of Position B.
Position A is reporting to Position X and Position B is reporting to Positon Y.
i.e. , Position A and Positon B are reporting to seperate positions.
My question is:
According to our travel management workflow logic , if the holder of the shared position applies for a travel request, The approval of the travel request should go to Position X ( The position which is heading Position A ) Obviously because our employee is holding %70 of position A, and is primarily reporting to position X.
Now, we checked the workflow, and it's working fine from R/3 , however, the Enterprise portal is showing Position Y as the position which should approve the travel request.
Thanks !

Generally
Even thogh if he is haveing many approver the request will go and have to go to that manager in which the Position where his working percentage is more
Ex: X employee is working for three projects A B C for A 25 % B 25% C 50% so the approve shd go to C project manager
are u doing this with the help of the work flow please let us know
might be useful iam not sure jsut want to share

Similar Messages

Reporting structure between two positions as vise versa

Hi,
Two positions for eg. AGM (A002 relationship) reporting to Deputy MG and Deputy MG (A002 relationship) reporting to AGM..as per my knowledge reporting structure between two posiitions is maintained with two different relationships i.e A002 and B002 relationship ie.if one relationship is maintained another is automatically maintained...is it possible to maintain two positions reporting to each other (A002)...Please help ASAP.....!!
Thanks

Hi Sonu,
You are asking abt a inverse relationship and yes A/B002 will do that
say AGM is the higger position and DGM is the lower so when DGM reporting to AGM it will be A/002 and when AGM reports to DGM then it will be B/002
So always the higher position is taken as A and lower is B.
Hope this clarifies ur issue.
Thanks
Swati

Report for Two Position

Hello Experts,
Is their any report available by which we can know to houw many position employee is assigned & wat are they with priority.
Also , if an employee is assigned more than one position,does it data pass to PA.That means whether we will be able to see both the positon in PA30.
Thanks.
Viru.

Hi Virendra,
Have a look at the Report RHXSTR04.. Select Reporting Period.. ALL.... and the Status as 1...
When the employee is assigned to more than one position, it checks the priority and the staffing percentage....
It's either way !!!!
Staffing percentage will not be over 100%.....in any case...
In a case where employee is assigned to two positions, with staffing percentages as 50% each, then it checks the priority...
Whichever has got the Highest Priority, it will be visible in PA; infotype 0001.
1. You may test this, by assigning two positions to employee with different variables....of Priority and staffing Percentages....
2. Next, Run RHINTE30 and create a batch run.
3. Go to SM35 and execute the Batch run...
4. Finally, go to PA20 and check the Infotype 0001 to see which position appeared.
Good Luck !!!!
Kumarpal Jain.

Multiple Managers of an org unit

Dear Friends,
I need to know the org units where there are multiple managers apart from the one manager who is actually belongs to that particular org unit.
for example Org unit - 5000021 has a position no- 3000012 who is the actual manager for the org unit. But when I go to hrp1001 for the org unit I see that there are multiple records for B 012 such as for the org unit-5000021 such as Position nos - 3000015, 3000021, 3000033, 3000028 etc. which should not be the case.
Is there any way I can find such org units in th structure & rectify the same with help of any report. Please guide.
Regards,
Aks

use RHINTE00 program to create relationship, you can create the relationship for specific Org, unit by selecting Org. Unit selection field from "Further Selections".
as the relationships is wrongly assigned to org units
one u need to correct it and again reassign it with the existing one
Edited by: Sikindar on Jun 8, 2009 2:29 PM

Assigning employee to two positions

Hello,
In my organization the HR department has decided to enable employees to be assigned to two positions at the same time (work percentage of 50% for each).
However, the SAP-HR solution was bulit on the assumption that an employee is assigned to one position only at the same time, and it would be very hard to change all the developments (such as Z-reports, user exits etc) to fit into the new regulation.
So I would like to ask if anyone has an idea of how to cope with this new demand: does anyone know a specific PA-Infotype we may use or another solution?
Thank you & Kind regards
Adi

Hi Liran,
Probably this is what i would try if i was you..
Using the standard solution : Currently i understand all your Z reports and Developments are completed and you wouldnt wanna bother any of these to avoid further complications- Thus what i can suggest is to use/create another relationship between employee and the secondary position.
Primary Position can always have the standard A008 relationship. But you can also have the flexiility of keeping 100% to both the position the employee holds, the system does not restrict you on this.
Now, having said that - I suppose your report on Position is based on relationship or evaluation paths, thus i dont find the possibility of damaging your current developments using a custom relationship.
Let me know if this works or we can talk on an alternate solution for you.
Good Luck Mate !!
Cheers,
Regi Alex.

Person having two PSA & two positions in 0001 at the same time

Hi Gurus!!!
How to handle a situation where a Person is having two different PSA (becouse he is Head of two PSA A & PSA B) at the same time, at present he is holding two Positions lets say Positon A1 & B1 in Org Management, but i have to assign him two PSAs also. PY will only be run from PSA A only which is his core PSA.
Can we run any action for that? i need this for report purpose, to show that employee was working in two different PSAs at the same time.
Appreciate your help....!!
Rgds
Anupama

if he is havein two postions and these position have to be maintained in two PSA right
in the IT0001 we get PSA by defeault right as we assing the PSA with PA
so there is not chance for maintaining the PSA as per the Above functionality
if we can add an another feild in IT001
and maitain the feilds Positon and PSA which are to be maintained that would be fine Right
and as per the requiremtn the Process of the PY shd be run form the one PY area and tht should belong to one PA
but make sure this shd be only for display and reporting purpose
because there will lot of things based on PSA first check the first option

OBIEE report from multiple facts at different levels

Currently we need to develop a report with columns from 3 different facts surrounded with conformed and non conformed dimensions at different levels.
After setting the hierarchial levels and putting the facts into single logical table with different sources OBIEE is generating 2 different queries and does a full outer join.
I would like to know how we can do a left outer join instead of full outer join between the 2 queries based on a common column?
Thanks in advance.

Hi Vinod,
The scenario provided in the link above doesnt match to my issue.
We need to develop a report from multiple fact tables at different levels with conformed & non conformed dimension columns.
I have 7 dimensions D1, D2, D3, D4, D5, D6 and D7 & two fact F1 and F2 tables.
F1 is tied to dimensions D1,D2,D3,D4,d5
F2 is tied to dimensions D3,D4,D5, D6 and D7.
In my report I have columns from D1, D2, D3, D4, D5, D6, D7, F1 and F2.
So OBIEE generates 2 queries with columns from D1,D2,D3,D4,d5 & F1 measure and another query with D3,D4,D5, D6, D7 and F2 measure.
and then does a cross fact join out of box between 2 queries.
But I need to do a left outer join between the 2 queries on a common column instead of cross fact join. I would like to know how we can achive this.
Thanks.

Bursting a report with multiple queries

Hi,
I need to set-up bursting in BIP for a report with multiple queries. The output format is pdf and delivery is through e-mail. Since the queries need to be linked, I'm trying to do this using data template. I've set-up split and burst based on a field (store_id) from the first query which is used as a bind variable in the subsequent queries. So I'd ideally want the report to be split based on store_id. The report works fine if I use a parameter for store_id and view the output by store_id. When I try to schedule the report for bursting, it generates and e-mails the reports but only the last report appears to have correct data output while the others have only the output from the first query (and all other queries appear to return nothing in the report).
Any suggestions on what could be the issue here? Thanks!
Here is the data template for the report:
<dataTemplate name="Report" description="Report" dataSourceRef="ReportDB">
<dataQuery>
<sqlStatement name="STORE_VENDOR">
<![CDATA[SELECT STORE.STORE_ID Q1_STORE_ID, VENDOR.VENDOR_ID Q1_VENDOR_ID, VENDOR.VENDOR_DESC Q1_VENDOR_DESC, PERSON.NAME Q1_NAME
               FROM STORE, SERVICE_TICKET, VENDOR, ROLE, ROLE_TYPE, PERSON, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET.SOURCE_ID = VENDOR.SOURCE_ID AND SERVICE_TICKET.VENDOR_ID = VENDOR.VENDOR_ID)
               AND (STORE.SOURCE_ID = ROLE.SOURCE_ID AND STORE.STORE_ID = ROLE.STORE_ID)
               AND (ROLE.SOURCE_ID = ROLE_TYPE.SOURCE_ID AND ROLE.ROLE_TYPE_ID = ROLE_TYPE.TYPE_ID AND ROLE_TYPE.TYPE_DESC = 'PIC')
               AND (ROLE.SOURCE_ID = PERSON.SOURCE_ID AND ROLE.PERSON_ID = PERSON.PERSON_ID)
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               GROUP BY STORE.STORE_ID, VENDOR.VENDOR_ID, VENDOR.VENDOR_DESC, PERSON.NAME
               ORDER BY STORE.STORE_ID]]>
</sqlStatement>
<sqlStatement name="WO">
<![CDATA[SELECT STORE.STORE_ID Q3_STORE_ID, 'Nightly Cleaning' Q3_NIGHTLY_CLEANING, 'Nightly Cleaning' Q3_DESCRIPTION, SERVICE_TICKET.TICKET_ID Q3_TICKET_ID, TO_CHAR(SERVICE_TICKET.END_DATE, 'MM/DD/YYYY') Q3_END_DATE, 'Excellent' Q3_QUALITY_RATING_1, 'Satisfactory' Q3_QUALITY_RATING_2, 'Unsatisfactory' Q3_QUALITY_RATING_3
               FROM SERVICE_TICKET, STORE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4']]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_1">
<![CDATA[SELECT STORE.STORE_ID Q4_STORE_ID, ZONE.ZONE_DESC Q4_ZONE_DESC, SERVICE_TICKET_LINE.SERVICE_COST Q4_SERVICE_COST, SERVICE_TICKET_LINE.TICKET_ID Q4_TICKET_ID, TO_CHAR(SERVICE_TICKET_LINE.WO_END_DATE, 'MM/DD/YYYY') Q4_WO_END_DATE, 'Excellent' Q4_QUALITY_RATING_1, 'Satisfactory' Q4_QUALITY_RATING_2, 'Unsatisfactory' Q4_QUALITY_RATING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'ABC'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TICKET_LINE.SOURCE_ID, SERVICE_TICKET_LINE.TICKET_ID, SERVICE_TICKET_LINE.LINE_ID]]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_2">
<![CDATA[SELECT STORE.STORE_ID Q5_STORE_ID, ZONE.ZONE_DESC Q5_ZONE_DESC, SERVICE_TICKET_LINE.SERVICE_COST Q5_SERVICE_COST, SERVICE_TICKET_LINE.TICKET_ID Q5_TICKET_ID, TO_CHAR(SERVICE_TICKET_LINE.WO_END_DATE, 'MM/DD/YYYY') Q5_WO_END_DATE, 'Excellent' Q5_QUALITY_RATING_1, 'Satisfactory' Q5_QUALITY_RATING_2, 'Unsatisfactory' Q5_QUALITY_RATING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'XYZ'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TICKET_LINE.SOURCE_ID, SERVICE_TICKET_LINE.TICKET_ID, SERVICE_TICKET_LINE.LINE_ID]]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_3">
<![CDATA[SELECT STORE.STORE_ID Q6_STORE_ID, ZONE.ZONE_DESC Q6_ZONE_DESC, 'Excellent' Q6_QUALITY_RATING_1, 'Satisfactory' Q6_QUALITY_RATING_2, 'Unsatisfactory' Q6_QUALITY_RATING_3, 'One' Q6_QTY_MISSING_1, 'Two' Q6_QTY_MISSING_2, '3 or More' Q6_QTY_MISSING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'PQR'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TYPE.TYPE_ID]]>
</sqlStatement>
</dataQuery>
<dataStructure>
     <group name="G_STORE_VENDOR" source="STORE_VENDOR">
          <element name="Q1_STORE_ID" value="Q1_STORE_ID"/>
          <element name="Q1_VENDOR_ID" value="Q1_VENDOR_ID"/>
          <element name="Q1_VENDOR_DESC" value="Q1_VENDOR_DESC"/>
          <element name="Q1_NAME" value="Q1_NAME"/>
     </group>
     <group name="G_WO" source="WO">
          <element name="Q3_NIGHTLY_CLEANING" value="Q3_NIGHTLY_CLEANING"/>
          <element name="Q3_DESCRIPTION" value="Q3_DESCRIPTION"/>
          <element name="Q3_TICKET_ID" value="Q3_TICKET_ID"/>
          <element name="Q3_END_DATE" value="Q3_END_DATE"/>
          <element name="Q3_QUALITY_RATING_1" value="Q3_QUALITY_RATING_1"/>
          <element name="Q3_QUALITY_RATING_2" value="Q3_QUALITY_RATING_2"/>
          <element name="Q3_QUALITY_RATING_3" value="Q3_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_1" source="SERVC_TYPE_1">
          <element name="Q4_ZONE_DESC" value="Q4_ZONE_DESC"/>
          <element name="Q4_SERVICE_COST" value="Q4_SERVICE_COST"/>
          <element name="Q4_TICKET_ID" value="Q4_TICKET_ID"/>
          <element name="Q4_WO_END_DATE" value="Q4_WO_END_DATE"/>
          <element name="Q4_QUALITY_RATING_1" value="Q4_QUALITY_RATING_1"/>
          <element name="Q4_QUALITY_RATING_2" value="Q4_QUALITY_RATING_2"/>
          <element name="Q4_QUALITY_RATING_3" value="Q4_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_2" source="SERVC_TYPE_2">
          <element name="Q5_ZONE_DESC" value="Q5_ZONE_DESC"/>
          <element name="Q5_SERVICE_COST" value="Q5_SERVICE_COST"/>
          <element name="Q5_TICKET_ID" value="Q5_TICKET_ID"/>
          <element name="Q5_WO_END_DATE" value="Q5_WO_END_DATE"/>
          <element name="Q5_QUALITY_RATING_1" value="Q5_QUALITY_RATING_1"/>
          <element name="Q5_QUALITY_RATING_2" value="Q5_QUALITY_RATING_2"/>
          <element name="Q5_QUALITY_RATING_3" value="Q5_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_3" source="SERVC_TYPE_3">
          <element name="Q6_ZONE_DESC" value="Q6_ZONE_DESC"/>
          <element name="Q6_QUALITY_RATING_1" value="Q6_QUALITY_RATING_1"/>
          <element name="Q6_QUALITY_RATING_2" value="Q6_QUALITY_RATING_2"/>
          <element name="Q6_QUALITY_RATING_3" value="Q6_QUALITY_RATING_3"/>
          <element name="Q6_QTY_MISSING_1" value="Q6_QTY_MISSING_1"/>
          <element name="Q6_QTY_MISSING_2" value="Q6_QTY_MISSING_2"/>
          <element name="Q6_QTY_MISSING_3" value="Q6_QTY_MISSING_3"/>
     </group>
</dataStructure>
</dataTemplate>

Hello user6428199,
When you use ":Q1_STORE_ID" in your queries, BI Publisher looks for a report parameter named Q1_STORE_ID. Change all your report queries to get data for all the store_id's available. As you are bursting the report using the store_id as the bursting key, BI Publisher will split the report based on the stored_id and delivers content based on it. No matter how many queries you may have, BI Publisher will loop through all the store_id's available and all the queries will return data for that particular id in a report.
Thanks,
Machaan

Report with multiple dimensions in Row and Column with EvEXP

Hi
We are currently running BPC 7.0 SP3 and try to create the report(or schedule) with more 2 x 2 dimensions in the row and column.
e.g.
row dimension : Outer row is Entity, Inner row is Account
column dimension : Outer column is Time, Inner row is Category
We created the report with 2 x 2 dimensions like above e.g. with EvEXP and EvNXP, NOT EvDRE
based on default dynamic template:Template13.xlt(Nested Row, 2 x 1 dimensions defined by EvEXP and EvNXP formula).
However, when expanding the dimension with double click these dimensions or change CV of the report with 2 x 2 dimensions defined by EvEXP and EvNXP formula,
error occurs on EvEXP and EvNXP formula and can't retrieve the result correctly.
[Question]
Can't we create the report with more 2 x 2 dimensions in the row and column using EvEXP and EvNXP function ?
We understand that we can make the report with more 2 x 2 dimensions in the row and column if using EvDRE.
Thank You in advance
Kenya

Thank you for your advice.
I understand that we should use EvDRE when creating the report with multiple dimension in the row/column　because EvEXP have some erros, poor performance, etc.
Then, we have two questions.
1)
>plus they had some errors in the designs.
what kind of errors they have as an example?
2)
>If you must build the EVEXP and EVNXP, I would suggest building the template from scratch
We built the simple template with just 2 x 2 dimension from scratch.
But this report doesn't work well when double-click the dimension or changing CV...
Would you please check the following template?
<https://sapmats-de.sap-ag.de/download/download.cgi?id=RCZE1ME4YSORY3DCDO4NNMANZLBL1L5ZBUOB2F71YVNVS8XDJW>
It would be greatly appreciated if you could give me your advice for the template.
Thank you again
And my best regards,
Kenya

What is best way to link two interactive reports?

Hi,
=================
Basic Set UP
=================
I've created two interactive reports-- Project report in Project page and Task report in Task page.
Project report in Project page can contain multiple projects.
Task report in Task page can contain multiple tasks.
One project can have multiple tasks.
But one task can have only one project.
=================
What I'm trying to achieve
=================
When I click a Project Name, it should pass Project ID to Task page and display tasks that are pertaining to the project.
When I create a new task, the passed Project ID should be mapped to the task.
=================
Challenges
=================
1. How can I pass Project ID from Project page to Task page while clicking Project Name in Project page ?
2. How can I get Project Name in Task page based on the Project ID passed from Project page ?
3. How can I display tasks pertaining to the Project Name ?
4. How can I take Project ID passed to Task page and map it to a new task?
Thanks,
Guy

1. How can I pass Project ID from Project page to Task page while clicking Project Name in Project page ?Create hidden item in Task Page, for example :P2_PROJECT_ID. Than link on required column to Task page:
Interactive Report -> Edit Column -> Link.
2. How can I get Project Name in Task page based on the Project ID passed from Project page ? There is two ways you can create a function that will return project name by id or you can post project name to task page (The second way is unsafe, you can miss some parts of your project name if you will have a ',' symbol)
3. How can I display tasks pertaining to the Project Name ?In interactive report source add condition to your query, for example:
and task_table.project_id=:P2_PROJECT_ID

Evaluation Path for Position to Position Reporting Structure

Hello Everyone,
We currently have a position to position reporting structure in place. WIth this being said, not every supervisor in our organization is the chief of a team. I am trying to create an evaluation path that will look at a position, then go up to get the positions report to position (but not go up any further), then go down to get the positions that report to the supervisor. This will allow us to start with a position, then return all the positions that the report to position has. In essence this will allow us to start with a position and get the team (though we don't have an org unit for the team). I am trying to do this for the Team Calendar in ESS.
Below is what I have. The problem is with the depth, if I enter a 2, then it is not getting the lateral positions, but if I enter a 3, then it goes up to another level and gets an additional supervisor (which I do not want).
S     A     002     Reports (line) to     2     S
S     B     002     Is line supervisor of     1     S
S     A     008     Holder     3     P
Has anyone developed and Evaluation Path that does this (gets a positions team without having an org unit) and can offer assistance?
Best Regards,
Scott

My first suggestion was either use Bottoms-up approach or top-down dont use both..like either use either of below
S A 002 Reports (line) or
S B 002 Is line supervisor
but figured u will still have depth issues..so therefore
you cld experiment like below..i understood your requirement, and i am suggesting this totally off-hand thats on top of my head..as i said experiement doing this way..
say you have four levels why dont you use different evalutaion path to link them between each level..
say 1st to 2nd (reports to A002)
      2nd to 3rd (subordinate to A005)
      3rd to 4th/4th to 3rd (Is line supervisor B 002 )etc
this way you will not have the depth issue as each one is diffeent Ev path..
...oops i can see people laughing at this solution..but well..i tried!

How to update when i have two updateable report on single page

Hi,
I've two updateable report created using pl/sql procedure. I really don't know how to update both reports at the same time. I report contains only one row and second one contains multiple rows.
For the second one, i use
FOR i IN 1..HTMLDB_APPLICATION.G_F01.COUNT
LOOP
UPDATE table
SET col3=HTMLDB_APPLICATION.G_F03(i),
col4=HTMLDB_APPLICATION.G_F04(i)
WHERE col1=HTMLDB_APPLICATION.G_F01(i) and
col2=HTMLDB_APPLICATION.G_F02(i);
end loop;
how to update the 1st report. Please help me

when you use the htmldb_item api to render form elements to your pages, those values end up in the htmldb_application.g_fNN arrays. i'm not sure how you defined your first report region, but you seem to be populating the g_f01 through g_f04 arrays with your second. if that's the case, try populating g_f05 with your first region. a query region like...
select htmldb_item.text(5,ename) from emp
...would do it. you should then be able to access those submitted values in the htmldb_application.g_f05 array.
hope this helps,
raj

Can create Webi report using multiple universe (multiple datasource)

Hi All,
Can we create a Webi report from multiple universe (can say multiple dataprovider & datasource)?
Please suggest.
Regards,

You can bring as many sources together into one report as you like.
However, to use them together you must have some common dimension, such as a particular Sold To Party, Business Partner, etc. You can then use merge dimensions to develop your report but you will need to be aware that dimensions that are NOT Common to both data providers cannot be used in a table combining two data providers.
So, if data provider one has dimensions Resort, Product and Year and a measure object Sales Value
while data provider one has dimensions Resort and Year and a measure object Cost Value, you cannot use Product in a report but you can display Resort, Year, Sales Value and Cost Value together to show you how much revenue each resort is generating each year and how much it is costing you to do so. To have product in the report table, you would need to add it to data provider two.
Hope that clears it up for you.
Regards,
Mark

Report on multiple data objects

I am not sure, I did this or not.. Is there a way to create a report on multiple data objects? My requirement is as follows
Data_object_A
Field1 Field2 Field3
1 ABC 123
2 DEF 456
3 GHI 789
Data_object_B
Field1 Field2 Field3
1 444 XYZ
2 555 STU
Over here I have a primary key and reference key as first column in the both data objects and I have to create a report by using equi-join..
that means I have to create a report with data from these above two data objects as below
select a.field1,a.field2,a.field3,b.field2,b.field3
from Data_object_A a, Data_object_B b
where a.field1=b.field2(+)
Regards,
Suneel Jakka

I created a View on the database side to join the tables, and created a single data object on the view.

Two horizontal reports bottom the third one

Is that possible to get two horizontal reports bottom the third one?
cccccccccccccccccccccccccccccc
caaaaaaaa 1st report aaaaaaaaaac
cccccccccccccccccccccccccccccc
caaa 2nd report aca 3rd report ac
cccccccccccccccccccccccccccccc
On the first moment I was sure it's very easy (and probably it's), but after a while, realized that I can't find solution... ;)
options: "regions templates" and "columns position" doesn't work ofcourse because of position of 1st report.
anyone knows the solution?
edit: a little problem with image -> a - empty cell, c - border
Edited by: nirud on 2009-08-26 02:42

already done

Holder of two positions, reporting to multiple managers in Travel managemen

Similar Messages

Maybe you are looking for