Hot Issue!

Hi All
I have a report(10g), there are some columns having arabic data.
it is showing me arabic characters in report builder but when i am calling the same report from application server its giving machine code. even a hard coded arabic text is not displaying WHILE other reports containing arabic characters are running well.
i have checked the nls_lang parameter, fonts path entry in report_path.
how can i resolve this issue?
Rha

I've read good things about those pads here..
http://discussions.apple.com/thread.jspa?messageID=2425762&#2425762
haven't tried them myself; i tend to use mine on my lap, and while it does get warm, i don't really mind.

Similar Messages

  • E1200 - Hot Issues

    Pros: bad to much hot and stop working then restart or reboot.
    Cons: hot issues
    plastic messy upfront top
    Other Thoughts: not for daily user
    bad as compare to e1000 unit.

    How hot are you talking about? The router is rated to operate within a range of temperatures, which even though may seem hot to you, is normal for the router.
    What other issues are you having with the E1200? Perhaps we can help you out with them

  • My lap it's going to be very hot issue and the videos very slowly i want change it i have the guarantee

    My lap it's going to be very hot issue and the videos very slowly i want change it i have the guarantee of my mac please help i have exames

    Please read this:
    http://support.apple.com/kb/HT1778
    Your MBP is NOT meant to be used on your lap.
    Try SMC and PRAM resets:
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379
    That may have a positive impact on video performance.
    Ciao.

  • Hot Sync Z22 with Windows 7

    Any suggestions on how can get my Z22 to synch with new laptop with Windows 7  64 bit?  I have searched and still can't find an answer.  Sure can't lose all that info I have.  I have downloaded the software from palm  6.2.2 I think... it doesn't work.  laptop does not recognize my Z22.  It loads the application software on my laptop but I can't transfer any of the info.   I was able to transfer all my files and emails, etc., but can't get my Palm info. Help!  Thanks
    Post relates to: Palm Z22

    "At the Top" refers to the grey-backgrounded threads known as "Sticky" threads.  These are hot-issue posts that refer to questions that get asked over, and over again.  They don't move, but remain at the top of each forum section "stuck" to the top.
    The one I was referring you to is here:
    http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=36872&jump=true
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Mac Book Pro First Generation Sleep issue

    I have a macbook pro first generation with the 1.8Ghz dual core (I added 1 GB ram for a total of 1.5GB). After updating it to OSX 10.4.8, the computer is having sleep issue. If I try to put it to sleep using the sleep command, it will go to sleep, but then it will make the clicking noises around the dvd player slot area, and within a minute or two the computer will wake itself up.
    This happens if I use the power adapter to run it, or if I use the battery to power it. In essence the computer is unable to be put to sleep using the sleep command from the menu. I can close the lid, and the display would turned itself off, but the clicking noises from the dvd slot area is still happening, so I am not sure if is is asleep. The only time that it will go to "deep sleep" mode if I leave it until the energy safe command kicks in and put it to sleep.
    I don't have problem getting the computer "awaken" from its sleep state. Though it does have that "blank" blue screen a mere seconds before it reverts to the desktop, which a lot of people have reported in their posting. Is this a software problem? or is it a hardware issues?
    The laptop is no longer does have its "super hot" issue. Now it is merely warmish hot but not unlike the "super hot" it was before. Cocoa application such as Adobe CS and Microsoft Office are not as fast or snappish as the native application, the speed is comparable to 1Ghz G4 processor. I suppose it is the pitfall or running an emulator?
    Does anyone else also experiencing the sleep issue problem? not able to put the laptop to a sleep mode?

    Hi!
    Yep, the trick with the PMU reset (5 second thinggy) could help. Also, try to reset your PRAM...reboot and hold down Apple-Option-P-R until it restarts again. Release the buttons and there you go...PRAM resetted. However, your date/time setting will be set back to a very early date.
    For me, I had the same trouble and I found out that it came from the Migration Assistant which I used to move from my TiBookG4 to my new MBPRo. After transferring all data to the MBP, performance was down and sleep was merely impossible. Reformatting it and reinstalling it was my cure (although this might not be a solution for you).
    The question here is : did you move an PowerPC apps via copy or migration assistant to your MBP? If not, do you have a virus checker installed that wants to download something in the background?
    Also, check for the "wake for administrator on network" option in the Energy Saver control panel...HTH

  • Hot Sync Zire31 with Windows 7 PC

    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

    "At the Top" refers to the grey-backgrounded threads known as "Sticky" threads.  These are hot-issue posts that refer to questions that get asked over, and over again.  They don't move, but remain at the top of each forum section "stuck" to the top.
    The one I was referring you to is here:
    http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=36872&jump=true
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • IW38 - Issue

    Dear all
    From IW38, we propagate to planning table and dispatch the operations to corresponding work center. When those operations are dispatched, there will be a color change in the line items ( From blue to black ) making the business user to know the status of dispatch. Its a standard transaction and no Z program involved in this.
    Navigation : IW38 / IW39 ( From list of orders pick one order ) -- >Go to --->Planning table pick one order from list of order -
    >Dispatch automatically -
    > At this point the colour of line item changes -
    > open order and change status ( User status may not be there in your system )
    Issue : During upgradation process ( From 4.7 to ECC6.0 ) , the system was upgraded from 4.7 non unicode to 4.7 unicode as first step. Now the color change is not happening and preventing the business user to understand the status.
    Expected the expert comments to resolve this hot issue.
    Regards
    Srinivasan

    Hi,
    Did you also check F_IT_ALV. This object allows to save the layouts as local objects. Remove activity 70 (Administer) to remove the save option completely.
    Regards,
    Raghu

  • Collections of issues about GPP Internet Settings

    Here
    is the summary of hot issues about the configuration of Internet Explorer Internet Settings via GPP from forum.
    Q: What can I do when options are grayed out?
    For example, the options to set cookies under “Privacy” tab are grayed out, so it is unable to configure it via GPP.
    A: We can configure the setting via registry as an alternative way, the values are stored under
    HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3.
    Privacy Settings (1A10) is used by the Privacy tab slider, more information are mentioned in
    KB182569.
    In order to apply the configuration in domain environment, we could deploy the registry entry via GPO. If one setting is controlled by a number of registry keys or binary values, then
    we can export the registry information from a reference PC, then apply the settings to related areas.
    Q: What is the importance of F5-F8 keys?
    A: The GPP doesn’t work even though it has been applied successfully with the help of the command Gpupdate /force. In this case, check if you have mixed up the function of F5-F8 keys:
    F5: Configure all of these settings
    F6: Configure just this setting
    F7: Ignore just this setting
    F8: Ignore all of these settings
    Please refer to the following article to get more help: Reference link:
    Red / Green: GP Preferences doesn’t work even though the
    policy applied and after gpupdate \force
    Q: Cannot find GPP for Internet Explorer 9 in a Windows Server 2008 environment.
    A:
     Please select the suitable solution according to the case:
    There’s a hotfix for this issue, see
    KB2530309,
    this update changes the values that are used for the internal filter for Internet Explorer 8 so that the settings also apply to Internet Explorer 9.
    Internet Explorer 9 and 10 GPP settings can only be shown up on Windows 8 (RSAT
    for Windows 8 installed)
    or Windows Server 2012 or higher versions.
    To configure Internet Explorer 11 GPP settings, you need to have Windows 8.1 (RSAT
    for Windows 8.1 installed)
    or Windows Server 2012 R2 installed as DC.
    Q: What is the filtering mechanism of GPP?
    A: If the GPP doesn’t apply successfully, it’s necessary to check the filtering setting, Item-Level Targeting which allows to change the scope of individual preference items.
    It is based on each setting whereas, however Security Filtering and WMI filtering are based on each GPO.
    Q: Internet Settings applied via GPP can be changed by the end user, what can I do to prevent this?
    A: This is by design, but we can manually set the Group Policy refresh interval, shorten the time to make the policy re-applied again and again to avoid this issue. We can
    configure the three policies:
    Computer Configuration\Administrative Templates\System\Group Policy\ Set Group Policy Refresh Interval for computers
    Computer Configuration\Administrative Templates\System\Group Policy\ Set Group Policy Refresh Interval for domain controllers
    User Configuration\Administrative Templates\System\Group Policy\
    Set Group Policy Refresh Interval for users
    We will appreciate if you have some more ideas about solving these kind of issues, please feel free to add your comments here and share your experience with us.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Great sharing.
    Kate Li
    TechNet Community Support

  • On Account Clearing Vendor/Customer

    Dear fellows
    We are to be implementing SAP ERP ECC 6 by u201CABACUS Consulting (Implementer)u201D here we enable the new GL functionality for segment reporting.  We have a hot issue with on account clearing in both customer and vendor.
    The scenario is that
    When we clear on account customer through f-32 and vendor through f-44 the system generates extra line items those increase the debit and credit amount with their respective ledgers.
    *Example*
    Create customer invoice e.g 50,000 Rs. with profit center 10, segment 1000
    Receipt on account payment from customer 50,000 Rs. with profit center 10, segment 1000
    Clear the account with f.32 at that time clearing line items are generating.
    Note:
    According to our implementers u201CAbacusu201D this is the standard functionality of SAP and referred the SAP standard Note 69767 to prove their justifications.
    The transaction is not relevant with given below difference clearing:
    1.     Account Type
    2.     open Item Account Number
    3.     General Ledger Account
    4.     GL Account Number
    5.     Main Asset Number
    6.     Company Code
    7.     business Area
    8.     business place
    9.     Profit Center
    10.     Partner Profit Center
    11.     Credit Control Area
    12.     Company ID
    13.     Update Currency for General Ledger Transaction Figure
    14.     Withholding Tax Code
    15.     Certificate Number of the Withholding Tax Exemption
    16.     Payee code
    17.     Document Number for Earmarked Fund
    18.     Earmarked Funds: Document Item
    Regards,
    Farhan FICO

    hello srikanth
    thanks for showing ur intrepid.
    invoice entries (fb60)
    Vendor(10013)               10,000
    Exp(41709006)          10,000
    payment entries (fbcj)
    vendor(10013)          10,000
    Cash (16620006)               10,000
    clearing entries
    Vendor(10013)          10,000
    vendor(10013)               10,000
    the clearing document increase the DR and Cr amounts.
    here, i want to clear one thing, this is not the SAP standard functionality because i have test this scenario on my IDES system and it is not generating any extra line items.
    SAP released the notes 69767 to justify the clearing line items and the system exactly work according to the notes, but in our case any of the given options (mentioned in Notes and my above post) be not matched causes to generate any extra line items.
    Regards,
    Farhan

  • Keyboard is not working on Macbook 1.83GHz with Windows XP Pro

    Hi
    There is a problem in Macbook 1.83 GHZ (Macbook 13-Inch Mid 2007 Combo) the keyboard is not working some times when I boot from Windows XP install Disk, after installation of Windows XP Operating System.
    Either I install first Mac OS x 10.4.9 then Install Windows XP Pro through bootcamp 1.2 Completion of both Operiting System I boot through Windows XP bootable CD OR I install Windows XP with out Mac OSX, in both conditions when i boot my computer through Windows XP bootable CD some times my built in keyboard (or external USB keyboard) does not work.
    Not only one Macbook is effected there are many.
    I request you to please advise to resolve this hot issue.

    Has any one had problem like this, plz share to resolve this issue.

  • Always use the default account when composing new messages box missing in Outlook 2010 after updating the product key.

    I have 2 accounts in outlook 2010. 1 is for me and the other I have delegate access to. When I am in the delegates email and want to reply it automatically uses the account the email is in. So if I am in my email, the from is me but if I am in the delegates
    email and hit reply the from is them. Now this is not working and I can't figure out how to get it to work. The only thing that changes is that office asked me to activate recently, which is weird since I have had this same computer with the same version of
    office for almost a year now. I did a ton of searching and came across an option on the internet: "Always use the deafult account when composing new messages" but this option is not there on my computer. I checked another computer I have with Office
    2010 also and the option is available so it must be something to do with the office activation because I haven't done it on this computer yet. PLEASE HELP!!!

    Seems this is a hot issue recently, I've post a reply to another thread with the similar topic, please reference that:
    http://social.technet.microsoft.com/Forums/en-US/57289ddd-0dd5-4938-92f7-ee420d8b0d7c/outlook-2010-does-not-reply-to-emails-using-the-same-address-that-received-it?forum=officeitproprevious
    Thanks for your updating.
    Tony Chen
    TechNet Community Support

  • Update the correct profit center in tables BSEG / BSAS / BSIS / BSIK / BSAK

    Hi FI Gurus,
    I am looking after a Support Project in SAP IS-Retail. I am from the FI functional and possess very limited knowledge in FI.
    My client has done the sales posting in SAP using IDOC's. During the postings, it was found that wrong Profit Centers were assigned. Due to this, the sales reports based on Profit Center are coming wrong. It was suggested to the client to reverse the IDOCs, do necessary changes in Profit Centers and re-post the IDOCs. The client wanted a short method to get the reports right. A senior consultant (Non FI) in the Company and the Management are forcing me to write a ABAP program to update certain (not all) FI tables. According to me, it will have some negative impact on the system for which reason I am not ready to take the call as a Project Manager. The management wants me to do the following (I am quoting the same mail which I received from the consultant ) :
    We need to update the correct profit center in tables BSEG / BSAS / BSIS / BSIK / BSAK / BSID / BSAD, wherever the records exists against billing document numbers provided.
    BAPI for updating profit center in Accounting documents: BAPI_ACC_DOCUMENT_POST
    Function Module : 'BAPI_DOCUMENT_CHANGE'
    Also look at SAP Note: Note 966428 - FB02: Functional area (FKBER) can be changed on coding block
    Based on the above, the ABAPer has written the program, the program will update the tables BSEG, BSIS, BSIK, according to the selection criteria of document number, company code and line item number with the new profit centers.
    Please clarify me about the following :
    1. This program is updating profit center in just the FI tables (BSEG, BSIS, BSIK etc.), but the New GL tables (faglflexa and faglflext) which have approx. 65 lakh entries in PRD do not get updated with the correct profit center.
    2. The Controlling tables also do not get updated with this program yet. Also since the previoius updation of Profit centers did not happen correctly, most of the times the controlling document has not been generated at all. Since we will be updating the profit center in just the FI tables, the controlling document will not be created still. Though there are SAP notes suggesting re-creation of the Controlling documents, which is still an option you can choose. Please confirm.
    3. The Special GL also does not get updated because of this.
    This is a very critical and hot issue. My job is at Stake as the Management has threatened me of sacking if I do not follow their directives as they are only concerned with their money.
    Is the consultant who suggested this change RIGHT ?
    Your early replies will help me take the decision.
    Regards

    Hi,
    There is no standard program or BAPI that would update profit centre in a posted document. You should either develop your own process for it,which is not recommended, but sometimes is essential, or reverse the existing documents and post them with the correct profit centre.
    Regards,
    Eli

  • LR4 and Camera Raw 6.7

    Hello,
    This is my first post, so please bear with me if I do something wrong.
    I got LR4 (update from 3) right after it was relesed.  I also have Photoshop CS5, so I ran into the PS/LR4 interoperability issue like everybody else.  I just checked the status of this issue and I read the followinng in the Lightroom Journal (posted by thogarty on March 12, 2012 under the title "Lightroom 4 Hot Issues":
    The team would like to provide an update on several issues discovered since last Monday night’s launch. Thanks for your patience while we investigated and compiled this list.
    Edit in Photoshop Workflow
    Currently, the Edit in Photoshop workflow asks that you have the Camera Raw 7 plug-in installed.  Please note that the Camera Raw 7 plug-in is not available at this time.  The correct plug-in for Lightroom 4 and Photoshop CS5 compatibility is Camera Raw 6.7, currently available on Adobe Labs Please keep in mind that currently Camera Raw 6.7 is a a Release Candidate version of the plug-in. A “release candidate” label indicates that this update is well tested but would benefit from additional community testing before it is distributed automatically to all of our customers.
    This is a little confusing.  When I start up LR4 and go to Help>About I get the About window in whose upper right corner I see "Lightroom 4.0, Camera Raw 7.0".  What is going to happen when the Camera Raw 6.7 gets released and I install it.  Is it going to upgrade my PS plug-in only or, perhaps, downgrade my LR4 plug-in at the same time?
    REgards,
    Andy

    I don't have Lightroom 4. And from what I had seen so far in the forum, I don't plan on getting it. But from what I have seen I don't think things are any different than they have been with previous versions. Lightroom 4 has been designed to work with Camera Raw 7, which will be part of Photoshop CS6. I don't have the CS6 Beta, and don't plan on getting it. But apparently ACR 7 is not yet ready for release. When you don't have the current release of Camera Raw my experience has been that Lightroom has always given that warning and provided you with the opportunity to edit a copy which includes the Lightroom adjustments. The reason this has to be done is that when you send a raw image from Lightroom to Photoshop Camera Raw Has to interpret the adjustments. And if you don't have the current version the best thing to choose is to send a copy that includes the Lightroom adjustments.
    But there seems to be a problem at this point because Lightroom 4 has been released ahead of Photoshop CS6 and so things are out of sync at the present time.
    When I was still using Lightroom 2 and even Lightroom 3 I was using Photoshop CS3. So my option was always to send a copy of the raw image to Photoshop. In those two versions of Lightroom the adjustments carried through and I felt the results were acceptable. Apparently, that isn't the case right now with the new version.
    Sending a copy to Photoshop doesn't really cause problems, in my opinion. Even if you don't have to do that, once you have completed your adjustments in Photoshop that image has to be saved as a new image. The adjustments cannot be applied from Photoshop to the original raw image. That has never been the case.
    In light of all the problems a lot of people seem to be having, I am steering clear of Lightroom 4, at least for the time being. I still get good results with Lightroom 3.6 and have full support for all my cameras. But it seems to me that it's going to take some coordinated effort from Adobe to get this Lightroom/ACR discrepancy resolved. Good luck to all of you. I'm just having a lot of fun with my Lightroom 3/Photoshop CS5 combination.

  • How Do I Use the New Adobe Forums?

    I know this thread will be moved somewhere else, but I have no clue where the "forum bugs" forum is, so I'm posting here in "Premiere" since that is where I hang out most of the time. 
    In the old forums I was able to get in, find the hot issues, either find an answer and get out.  Or I could quickly get in and find others who hadn't received help, yet, try to help and get back to work.  The primary sorting columns that made this possible were the "number of views" and number of replies.  Maybe it was the same column.  Either way, if I was wondering whether it was safe to go into the water with the latest release of Premiere Pro, I could quickly log in, sort by the number of repies (high to low) and discover the most vicious, recent bugs Adobe had introduced.  If I was feeling altruistic, I could log in, sort by replies (low to high) and find out what issues nobody had resolved, yet.  Maybe I could help; maybe I couldn't.  How can I get this column/view back in the new forums (or better, yet, revert to the old forum layout)?

    Jive Help http://docs.jivesoftware.com/jive/7.0/community_user/index.jsp
    Unwanted Email notices
    Click your avatar picture near the upper right corner (slightly to the left of the pencil) and select PREFERENCES then set all Email Preferences to OFF and click Save at the bottom left
    AND
    Another new "feature" is that Jive7 is oriented toward social networking... so every time you start or reply to a message you are automatically added to a FOLLOW list... meaning you receive a notification of every subsequent message in that thread
    Click the FOLLOW link at the upper right and select STOP FOLLOWING... and don't click the link again to check your status, as you will then be added to the CONNECTIONS STREAM and you will have to uncheck that option as well
    And, after you post in a message thread and select Stop Following, you need to do it all over again the next time you add a reply to the same message thread, since EVERY POST adds you to the automatic Follow list

  • Apple's latest noisy powerbook drives me crazy

    I posted this on silentpcreview.com, and re-post here to share you with my experience with the latest apple product.
    I just returned the latest verison of powerbook 12" to apple. Because it's so noisy.
    I choose apple's laptop because many people in this forum said apple's laptop is very quiet. But that is not ture, at least for the latest laptop from apple (made since Nov. 2005)
    The laptop has a G4 cpu running at 1.5Ghz, 80G Toshiba HD at 5400rpm, and a 64MB 3D card from Nvidia.
    When I first turn on the powerbook G4 I notice the noise comes from the left part of the laptop. It seems the cooling fan is running all the time at low rpm. Together with the working noise from HD, it's impossible not to be disturbed in a quiet room working in front of the laptop.
    I phoned apple saying the fan is always on, which is obviously uncommon. This book also has some problem reading os x dvd disc. They then arrange a replacement for me.
    When I got the replacement (which is also brand new), I think this one should be quiet, but again I'm wrong. The background noise is the same as the first one I got. After consulting apple's user discussion forum, I found such noise is considered normal for a powerbook G4.
    The book also runs hot very quickly. I already runs it at reduced speed (1Ghz), and lift the case with a notebook stand. The temp. of the cpu quickly jumps to 45C in 30 minutes even I'm just composing an email. Then the *real fan* turns on, with very loud noise for 1 minutes, only to drive down temp. by 3C. Then after 5 or 10 minutes, the temp. goes up to 45C again and the fan kicks in again. This happens even I'm just listening music through itunes which typically has a cpu usage of 15-20%.
    The really bad thing happens when I watch a movie encoded in h.264 using quicktime7, a format apple said providing "stunning quality". Unfortunately, enjoying the "stunning quality" means the cpu will work at 70-80% (at reduced clock rate of 1G), and the cooling fan will run crazily all the time! A good movie can be easily ruined by the noise from the cooling fan. In fact I only watch a movie for 40 minutes and then quit quicktime because of the noise.
    I then made a test: just turn on the powerbook and does not run any application, then the fan will fire up in one and a half hour! After that, the fan will kick in every 10 minutes, and I'm sure the cpu usage is as low as 5%!
    I phoned apple again, and again they said it's normal, since the fan will kick in whenever the cpu is too hot.
    I'm fed up with the hot issue. Beside this, the 'A' key drops out of the keyboard after one day of use! I finally ask a refund to end my very unpleasant experience with the latest powerbook.
    Now I understand why Apple will switch to intel's chip next year, power G4 is simply too hot for a laptop.
    If the ibook 1.25Ghz is quiet, I probabily will get an ibook instead. Or wait till Jan. next year when apple release its Pentium based intel laptop.
    Or should I get a laptop from ibm or dell?
    What's your opinions?
    Thanks,
    ejoy

    Hi
    can you please tell me how u set up the cpu freq from
    1.5 GHZ to 1 GHZ?
    Just set cpu to run in reduced performance in the Energy Saver, which should run around 1Ghz.
    While typing this, the cpu is around 55C, and the fan has been working for the past 30 minutes without stop (the laptop has been turned on for 3hr). the keypad is really hot now. I do not think many people can stand such a hot and noisy notebook.
    Anyway I think the after-sale service of apple in uk is very good. They are very polite to speak to and will arrange a collection of my powerbook then issue a refund. No hassel at all. I just hope apple's hardware could be as good.
    ejoy

Maybe you are looking for