How do i fix Macbook pro retina screen lines?

How do i fix Macbook pro retina screen lines? Little white lines appear everywhere, but i can still see the screen, but it is just uncomortable for the eyes to see them. They are like pixels...

I have the same problem, especially with Chrome gmail and evernote and it's driving me crazy. Anyone with a solution would be amazing!
Graham

Similar Messages

  • HT2807 how to know my macbook pro retina display is lg or samsung ? thank you

    Pls Help , do anyone Know . How to check my macbook Pro Retina Display Is LG or Samsung ? thank you

    Type this in Terminal
    ioreg -lw0 | grep \"EDID\" | sed "/[^<]*</s///" | xxd -p -r | strings -6
    it will give a string of numbers/letters
    if they start with "LP" you have an LG screen
    if they start with "LSN" you have a sansung screen

  • How to view my macbook pro retina on a iMac late 2009?

    How to view my Macbook Pro Retina on a late 2009 27" iMac? Note: Mini DisplayPort won't fit.

    Hi rainson,
    Here is a list of video adapters and the Mac models they can be used with:
    About Apple video adapters and cables
    http://support.apple.com/kb/ht3235
    This article describes Target Display Mode, which may also be useful for what you are trying to do:
    Target Display Mode: Frequently Asked Questions (FAQ)
    http://support.apple.com/kb/ht3924
    Cheers!
    - Ari

  • Macbook Pro Retina screen black lines

    Hi everyone.
    I have had my macbook pro retina since june 2013. I have had two strange experiences with the screen, all of a suddent after the screen went to sleep (on battery) and i turn it on again I get the screen filled with black and gray lines like this
    and I cannot restore it to normal without turning it off and on again. I could take a screenshot though.
    So I was wondering if you knew what it is due to and what should I do? My laptop is fairly new and I still have warranty.
    It was purchased in New York but now I am in Copenhagen, Denmark.
    We do not have a proper apple store, but some "Apple stores" which are affiliated with them and they normally ship them to Netherlands for repairing. Should I bring it in and get it fixed? Also I can do that here in DK too even though it was bought in New York right?
    Hope someone can help me.

    maeishoj wrote:
    Should I bring it in and get it fixed? Also I can do that here in DK too even though it was bought in New York right?
    Yes. Take it to the store and have it checked out.
    Best.

  • How to get new Macbook Pro Retina (late 2013) to detect external monitor via HDMI?

    Hi everyone, this is my first Mac and for the most part it's been really, really wonderful.
    This is my first major glitch:  I cannot get it to detect my external display:  It is an ASUS PA248Q, manufactured Aug 2012.
    The HDMI cable according to my Amazon history is at least 1.3c from 2010,  "Fanatic Digital Imperial Series Gold-Plated HDMI Cable (6 feet)".
    It works with perfectly connecting an AmazonTV box to an old Samsung TV, with vivid clarity, unlike our cableTV signal.
    Just in case, I have a new HDMI cable on order, which claims to be of newest standards.
    The Macbook Pro Retina (late 2013) has the standard Intel Iris from the Haswell chips, as well as Nvidia GT 750M, the latter which I don't think has been used yet.
    The ASUS display says:  HDMI NO SIGNAL.
    I have tried shutting them down and replugging the cable.  I don't know what the ideal order is.  The Macbook Pro is plugged into AC power, as suggested.
    In System Preferences>Display, I press the Option key to select "Detect Displays" option (seriously unintuitive).
    I have also tried resetting the NVRAM:
    I shut the machine down.  Pressed the power button, then quickly held the quadruplet:  Option-Command-P-R  (a double handful) and waited for the machine to chime a 2nd time.  Tried to detect external display no luck.
    Next, I reset the SMC:
    I shut the machine down.  Then I pressed Shift-Control-Option-Power   for about 5 to 10s.  Then I turned on the machine normally.
    NVRAM & SMC steps were from an old youtube video, as the instructions I had did not explain how to do so clearly.
    Please let me know if I"m doing something wrong.
    Seems so exorbitant to pay $350 for Apple Care;  that's a the cost for a whole new cheap laptop.
    I will search the forums again.  If anyone answers this,  thank so much!

    Hello there, willr314.
    It sounds like you've covered most of the practical steps found in this Knowledge Base article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573#1
    No video or no signal, image distortion, "snow," or flickering
    Check connections
    When using an external display be sure to check the following:
    If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
    Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
    Monitor and Display Adapter Table
    About Mini DisplayPort to HDMI adapters
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
    Try unplugging the video adapter or cable and then plug it back in.
    If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    The article does offer some additional links and recommendations as well:
    These articles may offer additional assistance and information about displays and video adapters:
    Apple Portables: How to use your computer in closed lid mode with an external display
    Apple Cinema Display (30-inch DVI) has 1280 x 800 as the maximum available resolution
    Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
    For assistance with Retina displays, please see Frequently asked questions about using a Retina display.
    If you tried all of these steps for your display and the video issues persist, contact Apple technical support or take your Apple computer to the nearest Apple Store or Apple Authorized Service Provider (AASP) for diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Green tint to Macbook Pro Retina screen.

    Hello,
    I have a Macbook Pro Retina less than 2 months old, earlier today the screen started to get a green tint on everything. I already attempted adjusting the color profile, which didn't affect the greenness of the screen.
    Thoughts?
    -Peter.

    Ok, the EXACT same thing happened to me, although I sneezed all over the screen (gross) and then wiped it off with a windex covered paper towel. Then followed up with a damp microfiber towel to remove smudges. There was no way that water could have gotten in nor the windex.
    So I raise you this question; did you use a microfiber cloth, and are you in a dry-cold or a dry-hot otherwise low humidity climate.
    The reason I ask, theoretically if you did use a microfiber, had the computer on, and rubbed back and forth across the screen several times, you may have created static electricity, which may have interfered with the screen.
    I found that after doing several power cycles (command+control+p+r+power) the green tint completely disappeared. I also noticed that the cat hair that flies around my house is not sticking to the screen anymore....
    Food for thought
    FYI purchased NOV/2014

  • Fall 2013 Macbook Pro Retina screen freezing and crashing

    Hello,
    lately, I have been experiencing some screen freezes on my Macbook Pro Retina 15''... The screen just freezes, including the mouse pointer and then it doesn't respond to anything. I just have to restart the machine again. This happens sometimes and not every day, but still a few times a week. I just do normal things on my mac while I get this problem.
    Also, just recently almost an hour ago, my screen just turned all white and it said "Your computer restarted because of a problem. Press any key to continue or a wait a couple minutes for it to reboot." This time, I was watching a movie when it happened.
    I have also verified the disk in disk utility, but no errors.
    What may be causing this issue? Hardware? Software? I also have applecare, but I'm eager to find out what's the problem before I hand it to the apple store.
    Thank you very much!
    This is the kernel panic log:
    Sun Mar 30 04:45:42 2014
    panic(cpu 0 caller 0xffffff8011adbe2e): Kernel trap at 0xffffff8011aa3319, type 13=general protection, registers:
    CR0: 0x0000000080010033, CR2: 0x00007fff7bee0000, CR3: 0x0000000065fc904e, CR4: 0x00000000001606e0
    RAX: 0x0000000000000001, RBX: 0xff000000ff000000, RCX: 0xffffff8035100450, RDX: 0x0000000000000821
    RSP: 0xffffff81e5a63d20, RBP: 0xffffff81e5a63d50, RSI: 0x0000000026a74e9c, RDI: 0xffffff80184f9800
    R8:  0x0000000000000000, R9:  0xffffff81e5a63ed0, R10: 0x00007fff5650aee0, R11: 0x00000000ffffffe5
    R12: 0xffffff80184f9800, R13: 0xffffff80164be000, R14: 0x00000000000e0000, R15: 0xffffff80449d7f40
    RFL: 0x0000000000010286, RIP: 0xffffff8011aa3319, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0x00007fff7bee0000, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81d3e5bc50 : 0xffffff8011a22fa9
    0xffffff81d3e5bcd0 : 0xffffff8011adbe2e
    0xffffff81d3e5bea0 : 0xffffff8011af3326
    0xffffff81d3e5bec0 : 0xffffff8011aa3319
    0xffffff81e5a63d50 : 0xffffff8011a7804e
    0xffffff81e5a63f20 : 0xffffff8011adc26c
    0xffffff81e5a63fb0 : 0xffffff8011af322b
    BSD process name corresponding to current thread: launchdadd
    Mac OS version:
    13C64
    Kernel version:
    Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
    Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
    Kernel slide:
    0x0000000011800000
    Kernel text base: 0xffffff8011a00000
    System model name: MacBookPro11,3 (Mac-2BD1B31983FE1663)
    System uptime in nanoseconds: 24365483293442
    last loaded kext at 17612576328462: com.apple.driver.AppleIntelMCEReporter
    104 (addr 0xffffff7f9414b000, size 49152)
    last unloaded kext at 17672593992681: com.apple.driver.AppleIntelMCEReporter
    104 (addr 0xffffff7f9414b000, size 32768)
    loaded kexts:
    com.Cycling74.driver.Soundflower
    1.5.3
    com.apple.filesystems.smbfs
    2.0.1
    com.apple.driver.AppleHWSensor
    1.9.5d0
    com.apple.filesystems.autofs
    3.0
    com.apple.driver.X86PlatformShim
    1.0.0
    com.apple.driver.AGPM
    100.14.15
    com.apple.driver.ApplePlatformEnabler
    2.0.9d1
    com.apple.iokit.IOBluetoothSerialManager
    4.2.3f10
    com.apple.driver.AppleHDA
    2.6.0f1
    com.apple.GeForce
    8.2.4
    com.apple.driver.AppleUpstreamUserClient
    3.5.13
    com.apple.driver.AudioAUUC
    1.60
    com.apple.driver.AppleIntelHD5000Graphics
    8.2.4
    com.apple.driver.AppleCameraInterface
    4.26.0
    com.apple.iokit.IOUserEthernet
    1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X
    7.0.0
    com.apple.driver.AppleHWAccess
    1
    com.apple.driver.AppleThunderboltIP
    1.1.2
    com.apple.driver.AppleLPC
    1.7.0
    com.apple.driver.AppleSMCLMU
    2.0.4d1
    com.apple.driver.AppleIntelFramebufferAzul
    8.2.4
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
    4.2.3f10
    com.apple.driver.AppleMuxControl
    3.4.35
    com.apple.driver.AppleMCCSControl
    1.1.12
    com.apple.driver.AppleUSBTCButtons
    240.2
    com.apple.driver.AppleUSBTCKeyboard
    240.2
    com.apple.driver.AppleUSBCardReader
    3.4.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
    1.0.0d1
    com.apple.BootCache
    35
    com.apple.driver.AppleUSBHub
    666.4.0
    com.apple.driver.XsanFilter
    404
    com.apple.iokit.IOAHCIBlockStorage
    2.5.1
    com.apple.driver.AppleAHCIPort
    3.0.0
    com.apple.driver.AirPort.Brcm4360
    831.21.63
    com.apple.driver.AppleUSBXHCI
    670.4.0
    com.apple.driver.AppleSmartBatteryManager
    161.0.0
    com.apple.driver.AppleRTC
    2.0
    com.apple.driver.AppleACPIButtons
    2.0
    com.apple.driver.AppleHPET
    1.8
    com.apple.driver.AppleSMBIOS
    2.1
    com.apple.driver.AppleACPIEC
    2.0
    com.apple.driver.AppleAPIC
    1.7
    com.apple.nke.applicationfirewall
    153
    com.apple.security.quarantine
    3
    com.apple.kext.triggers
    1.0
    com.apple.iokit.IOSerialFamily
    10.0.7
    com.apple.driver.DspFuncLib
    2.6.0f1
    com.apple.vecLib.kext
    1.0.0
    com.apple.iokit.IOAcceleratorFamily
    98.14
    com.apple.iokit.IOAudioFamily
    1.9.5fc2
    com.apple.kext.OSvKernDSPLib
    1.14
    com.apple.iokit.IOSurface
    91
    com.apple.iokit.IOBluetoothFamily
    4.2.3f10
    com.apple.driver.AppleHDAController
    2.6.0f1
    com.apple.iokit.IOHDAFamily
    2.6.0f1
    com.apple.nvidia.driver.NVDAGK100Hal
    8.2.4
    com.apple.nvidia.driver.NVDAResman
    8.2.4
    com.apple.AppleGraphicsDeviceControl
    3.4.35
    com.apple.iokit.IOAcceleratorFamily2
    98.14
    com.apple.iokit.IOBluetoothHostControllerUSBTransport
    4.2.3f10
    com.apple.driver.X86PlatformPlugin
    1.0.0
    com.apple.driver.AppleSMC
    3.1.8
    com.apple.driver.IOPlatformPluginFamily
    5.7.0d10
    com.apple.driver.AppleGraphicsControl
    3.4.35
    com.apple.driver.AppleBacklightExpert
    1.0.4
    com.apple.iokit.IONDRVSupport
    2.4.1
    com.apple.driver.AppleSMBusController
    1.0.11d1
    com.apple.iokit.IOGraphicsFamily
    2.4.1
    com.apple.driver.AppleUSBMultitouch
    240.9
    com.apple.iokit.IOSCSIBlockCommandsDevice
    3.6.6
    com.apple.iokit.IOUSBMassStorageClass
    3.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily
    3.6.6
    com.apple.driver.AppleUSBMergeNub
    650.4.0
    com.apple.iokit.IOUSBHIDDriver
    660.4.0
    com.apple.driver.AppleUSBComposite
    656.4.1
    com.apple.driver.AppleThunderboltDPInAdapter
    3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily
    3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter
    1.4.5
    com.apple.iokit.IOUSBUserClient
    660.4.2
    com.apple.iokit.IOAHCIFamily
    2.6.5
    com.apple.driver.AppleThunderboltNHI
    2.0.1
    com.apple.iokit.IOThunderboltFamily
    3.2.7
    com.apple.iokit.IO80211Family
    630.35
    com.apple.driver.mDNSOffloadUserClient
    1.0.1b5
    com.apple.iokit.IONetworkingFamily
    3.2
    com.apple.iokit.IOUSBFamily
    675.4.0
    com.apple.driver.AppleEFINVRAM
    2.0
    com.apple.driver.AppleEFIRuntime
    2.0
    com.apple.iokit.IOHIDFamily
    2.0.0
    com.apple.iokit.IOSMBusFamily
    1.1
    com.apple.security.sandbox
    278.11
    com.apple.kext.AppleMatch
    1.0.0d1
    com.apple.security.TMSafetyNet
    7
    com.apple.driver.AppleKeyStore
    2
    com.apple.driver.DiskImages
    371.1
    com.apple.iokit.IOStorageFamily
    1.9
    com.apple.iokit.IOReportFamily
    23
    com.apple.driver.AppleFDEKeyStore
    28.30
    com.apple.driver.AppleACPIPlatform
    2.0
    com.apple.iokit.IOPCIFamily
    2.9
    com.apple.iokit.IOACPIFamily
    1.4
    com.apple.kec.pthread
    1
    com.apple.kec.corecrypto
    1.0
    System Profile:
    Model: MacBookPro11,3, BootROM MBP112.0138.B02, 4 processors, Intel Core i7, 2.6 GHz, 16 GB, SMC 2.19f3
    Graphics: Intel Iris Pro, Intel Iris Pro, Built-In, 1024 MB
    Graphics: NVIDIA GeForce GT 750M, NVIDIA GeForce GT 750M, PCIe, 2048 MB
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x134), Broadcom BCM43xx 1.0 (6.30.223.154.63)
    Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en0
    Serial ATA Device: APPLE SSD SM0512F, 500,28 GB
    USB Device: Internal Memory Card Reader
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    Thunderbolt Bus: MacBook Pro, Apple Inc., 17.1

    Looks like a RAM issue.
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000

  • How to upgrade Lr3 & CS5 to be compatible with new Macbook Pro retina screen

    I believe that Adobe has recently released upgrades to Lightroom and CS6 that make them compatible with the retina screen.   First of all, is this correct and secondly, if I have Lr3 and CS5, how do I upgrade?   I know it's a dumb question.

    Annmaxine21 wrote:
    I believe that Adobe has recently released upgrades to Lightroom and CS6 that make them compatible with the retina screen.   First of all, is this correct
    Yes, it is correct.
    The following include Retina support
    Photoshop CS6 13.0.2 (Perpetual license) and Photoshop 13.1 (Cloud members only)
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5448
    Lightroom 4.3 (Library and Develop modules) http://www.adobe.com/support/downloads/detail.jsp?ftpID=5520
    Annmaxine21 wrote:
    if I have Lr3 and CS5, how do I upgrade?
    Either you pay to upgrade to Photoshop CS6 and Lightroom 4
    http://www.adobe.com/products/photoshop/buying-guide-upgrades.html
    http://www.adobe.com/products/photoshop-lightroom/buying-guide-upgrades.html
    or you join the Creative Cloud for a monthly fee and get the upgrades included in your membership

  • Macbook Pro Retina Screen Resolution Issues

    I have just bought a retina display Macbook Pro (Early 2013) with OS X 10.8.3 Mountain Lion. 
    Before getting it, I did not realize what an effect it would have on the use of my existing programs, and had I known, I would have thought twice before switching from my non-Retina Macbook Pro. I have never had so many problems with a brand new computer. On my retina screen, programs such as Microsoft Office 2011, Adobe Creative Suite 5 and Acrobat Pro X run with an awful screen resolution and impossibile legibility. The pixelated graphics and image quality hurt my eyes, beyond the fact that I cannot see my lines, images and text properly in order to work with them.
    In these programs, the "Open in Low Resolution" button is enabled permanatly and cannot be changed as it's option is ghosted out. I do not know how to make it look better or what to do. I cannot work using this low resolution and this issue has affected my productivity.
    <Edited by Host>

    nadia_d,
    You have a new MBP you have 14 days to return/exchange, 90 days of free phone support, as well as 1 year at the store. Take advantage of this.
    Phone 800-692-7753

  • Macbook pro retina screen flicking problem

    I bought this 15 inches Macbook pro back in Nov, 2012. And I have the screen flicking problem in Dec.
    The problem is the same here listed on youtube. You can find hundres of them just by searching "retina flicker" on youtube.
    http://www.youtube.com/watch?v=Ko6WCqw20ZE
    And I did a lot of researches on this. I had also gone to the Apple Store 2 times, one Genius Bar Staff told me this has to be a hardware problem and offer to fix my laptop, others said it might be a software based problem and adviced me to wait for the new system update. I don't have time for a long fixing so I chose waiting. That particular one who told me to wait for the next software update also encourage me to dig deep and tried to find the root cause by myself...and I did. I found my screen flicking problem could caused by cellphone inteference. And It seems that the Wi-Fi antena is also a key component here. If I turn off Wi-Fi completely, the flickering went away.
    Some solutions I found online
    1. It can caused by Enable Safari webGL. So disable webGL and turn off develop mode
    2. Disable displaycard auto switch in Power saving tab
    3. Close the lid put the sytem into sleep and re-open the lid
    4. stop using Wi-Fi. That's right people, try disable Wi-Fi!! It's the only working solution for me.
    5. It could be caused by CDMA cellphones including US Verizon brand cellphones and many others. GSM cellphones are OK. Try to turn off your cellphone or drive to a empty plaza and try to see your laptop still flickering at your car. Turn off your cellphone when You do this.
    What doesn't work
    Reboot
    reinstall OS
    go to Apple Store and change Logic Board (Someone reported that after logic board change, the problem came back after a while)
    Let me know if you guys have any findings, Thanks!!

    I'm sure that you've seen the problem with 'burn-in' and 'ghosting' on some MBP-R machines in threads on this forum. It doesn't seem to be an overwhelming problem, but some have reported it.
    Did you buy it from an Apple Store or online? Either way, you need to get tough with Apple. Tell them you need to keep your computer and, when they deliver a replacement to your local Apple Store, you'll bring it in for exchange. That's what they've been doing with most people that have had MBP-R problems - I've never heard of them requesting that you send your computer back before they will exchange. Did you contact your local Apple Store or was this response from an AppleCare phone conversation. If the latter, take it into the Apple Store, explain what you want to do, and I'm sure that they will work with you.
    Good luck,
    Clinton

  • How to approach a Macbook pro without screen

    I own a Macbook pro early 2008 with the well known Nvdia issue (black screen). Apple didn't want to repair it under the special program (Apple user since early 90's) so I went to a specialized company to reball the chip. Worked very well but not for a long time. But the problem came back, so again I have the black screen. I don't want to spent any money anymore on this terrible (but very expensive) product (and even any more on any Apple product).
    The Mac does start up and I can see it in my home network. But how to retrieve the data without a screen. I didn't switch on the possibility for sharing so that's no option. What are the possibilities to retrieve data from the hard disk.

    Two ways.
    1) If you can access it from your network just copy the data over to one of your other computer hard drives. That is if you ever setup sharing and can get to that data over the network.
    2) Take the drive out and connect it to another Apple computer, or a Windows computer that has a special program installed to read Mac formatted drives, and copy the data over. you will need a SATA to USB adapter or enclosure to do that. I suggest the adapter as they are more flexable for other things.
    You can also use that hard drive in another system if you chose to. That is after you copy your data off it. All you have to do is format it for Windows.

  • Can't open Adobe cs5.5 .dmg on a 15inch MacBook Pro Retina screen

    Hi there,
    Hopefully someone can help.
    I recently bought a 15inch retina screen new macbook pro after my old one started to die last week - I bought Adobe cs5.5 a few years ago and I'd really like to be able to install in on the new laptop so I can get on with my work. As there is no disc drive I downloaded the file from Adobe which took many hours and now as soon as I click on it it comes up with this.
    I tried to use the disc utility to do something with it but wasn't really sure what I needed to do and buggered up the first download and had to try and get it again. I haven't had this problem with my old laptop - i'd even updated the os to be running the same so I don't know why it's having a problem with the .dmg and as I haven't had the problem before I don't really know what to do. If someone could help me out I'd be super grateful as I do have client work I need to get on with.
    Thanks so much,
    Emilia

    Me thinks you have tried to connect to a shortcut folder and not a genuine folder.
    Note Mac OS X in Mac OS X 10.4 has 3 popular folder shortcut locations:
    The leftmost column of the Finder window.
    The horizontal toolbar on the top of the Finder window
    The translucent bar which can be anchored on the side or bottom of the screen known as the Dock. These are not true folder locations, but only locations for shortcuts. When you click on a folder for a volume that is not mounted, or is a folder which was deleted it will behave in this fashion. Often if you click on it the right fashion, it will change to a question mark.
    In addition if it is an alias to an existing folder that has no contents, it will behave this way from the three shortcut locations.
    If you right click instead of the left click a folder, it may think you want to do something to the folder which you can't do. Make sure your mouse button functions properly as a Primary button on Apple menu -> System Preferences -> Keyboard and Mouse.
    Also make sure Universal Access is not turned on as it too can cause funny behavior in the mouse click actions, in Apple menu -> System Preferences -> Universal Access.

  • MacBook Pro Retina screen cracked on it own while I was watching youtube.

    I purchased it on April 2014 from Executive Machines Dhaka, Gulshan Branch. Everything was working fine until 23 feb 2015. While me and my family were watching a youtube video on it, the screen started to crack from upper left side of the side. we all watched how the screen cracked from left to middle to the right.
    We all were in shock! In my entire life I have never seen such things. A screen cracked by it self!!! Anyway after that not the 24 feb, I went to dealer as I had free service of one year left. The guys at Executive Machines were shocked as well and said they never seen such things before and they will send the Mac to Singapore to get it checked. So did the paper work and left it with them. 3 weeks later, they notified me that Apple said NO!!
    So the fact here is, I didn't drop it nor damaged it in other means. 5 people in the house watched the whole thing live!!! If it was done me then there must have been damage marks, when I mac is fully fresh!!!! the saddest thing when I collected the Mac from Executive machines the screen started having black marks on the upper and lower side of the screen.
    This is the most shocking thing that ever happened in Tech using history and I keep wondering who's fault was it!!! Executive Machines received a mac with a mark on the screen and returned me with black marks and ''they said''  Apple said NO!!
    I tried to upload photos from 23 feb but something was wrong!!
    It would very nice If anybody from Apple contacts me and we can talk about the whole thing.

    You are not addressing APple here. We are all just users like yourself.
    If you country has Apple store
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    Otherwise contact an Apple Authorised Service Provider
    This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

  • Have you had New MacBook Pro retina screens crack?

    I have a new MacBook Pro and all of a sudden the screen cracked. I haven't dropped or done anything to it. Has a anyone had that problem?

    You should buy a hard case to protect your mac book. The hard  case clips on to the Macbook pro 15 inch . I have a hard case and a soft "incase" as well, which i bought from the apple store for when i carry my Mac Book retina. I understand you can buy screen to also stick onto the front screen to protect the LCD.

  • Macbook Pro Retina Screen Problems

    In July 2012, I got a Macbook Pro with Retina display with a one year Apple Care plan.
    Within the past few months, shortly after my Apple Care ended, I have had a host of problems with the display. Occasionally during use, the entire scren will kind of blank or static out, and just show a ton of gray stripes and eventually flicker back to normal. Also, there are two tiny divits or chips in the screen. The thing is, there was never anything done to prompt these. One day I just opened it, and the first one was there, and a few months later the second one.
    Because these are problems I have read about frequently (not to mention the image burning after I close certain programs that has been going on since I got the computer), even though my Apple Care expired, will Apple still repair or replace this, or am I totally out of luck?
    Any help given would be really appreciated!

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CSeq 'n Cause: -' | tail | awk '/:/{$4=""; print}' | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

Maybe you are looking for

  • Anyone Have Tips on Avoiding Jaggies in 3D Renderings?

    I'm noticing Jaggies in a rendering done with Image Based Light at the edges of bright reflections.  Obviously I'd rather not have such jaggies. I have the feeling that the problem is because the light is so bright that the rendering is ending up wit

  • How do you monitor your systems?

    I'd like to be able to monitor my Ironport systems to be able to see * SMTP up/down on each interface * active recipient queue size * CPU/RAM/Disk use (as a %) * number of connections in last 5 minutes * ...In fact some of the data from the system st

  • I-Trigue 3600 in combination with a stereo

    I want to connect my PC with an I-trigue 3600 system to my old stereo as an extra audio output (no input from the stereo system to the PC or 3600 required). I can connect the output to the 2 small creative speakers to the stereo: stereo works fine in

  • Printer control in smartform

    I'm trying to use a command in a smartform to set a printer control. What I do is: - I choose the node containing the text I want to alter. In this case it's the MAIN window. - I right-click on it and I select create->flow logic->command - In the gen

  • Master Group in segmentation

    Hi, How and why is Master Group used. I understand about the Target Group, but not about Master Group. Regards, Monica