How do I insert the SIM card in the I phone 6 I have managed to open it but can not get it back in

How do I insert SIM card in i phone 6 I have used the key and taken draw out but can not get sim back in

Probably doesn't have anything you haven't already tried (i.e., push) Remove the SIM card from your iPhone or iPad - Apple Support

Similar Messages

  • I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.

    I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.  
    Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem.   I still can not eject.   When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
    How do I solve this problem?

    Hi again Hal
    Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
    You have also tried resetting the PRAM as I suggestion in your other thread...?
    See resetting the PRAM > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • With iOS 7.0.2 I lost many apps from my screen.  They are in the Apps store under "updates."  I can open them but can't get them back onto the desktop for easy access.

    How can I get my Apps back on my iPhone screen?  Many disappeared when I updated to i0S 7.0.2.  I can open them from the Apps store where they are listed in Updates.  But I can't get them back on my desktop for easy access.

    Try restoring the iPhone from backup.

  • When opening firefox pop up says firefox is already running close window or restart computer this is happening all the time and i have no windows open so i can not get on the internet

    When i switch my laptop on then double click Firefox to go on the internet a pop up appears more often than not saying Firefox is already running you have to close existing window or restart your computer, i have nothing at all running so i have to restart the computer only to find the same thing happens again and again. I updated Firefox to newest version about 2 months ago and this was happening now and again but it seems to be happening all the time now. It is just luck sometimes that it lets me launch the internet.

    Hi There before i posted on this site i did all sorts of scans including malware scans. Today i got on internet no problem last night i tried the pop up appeared about 6 times i gave up. I have someone coming to look at my laptop today if they discover anything i will post the findings. Many Thanks Dancingflame

  • I exited iMovie and lost my project.  I am able to find it in Finder, under the Movies tab, but can not get it back to a project in iMovie.  Is there a way to restore it?

    Please help!  I exited iMovie and lost my project that I've been working on for days... I am able to find it in "Finder" under iMovie Projects... but I am unable to open it as a Project in iMovie.  I am using iMovie '11, with no time machine, and I'm on a MacBook Pro.

    I fully sympathise with you, as I recently experienced the same issue (as have many others).
    Projects always appear as normal in Finder in the Home folder Movies/iMovie Projects (or on an external disk at the top level in Movies/iMovie Projects). Nothing looks untoward there.
    However, when iMovie is opened again after an editing session, the most recent project worked on does not appear in the listing of projects in iMovie's Project Library - although it is still listed in the Finder folder . This happens for no apparent reason - no unexpected quits, freezes, or crashes, and nothing else out of the ordinary. iMovie is simply not recognizing the project. It can't even be opened by double-clicking on the project in Finder.
    Here are a number of links to other topics on this issue (there may be others I've missed):
    https://discussions.apple.com/message/21370074#21370074
    https://discussions.apple.com/message/21297057#21297057
    https://discussions.apple.com/message/21296973#21296973
    https://discussions.apple.com/message/21157327#21157327
    https://discussions.apple.com/message/21177008#21177008
    https://discussions.apple.com/thread/4748933?start=0&tstart=0
    https://discussions.apple.com/message/21157079#21157079
    Sorry to bombard you with all these links, but as you will see there are others here reporting the same problem. No solution has been forthcoming unfortunately.
    Be sure to provide feedback to Apple - in iMovie's menu click on iMovie > Provide iMovie Feedback, then complete the online form.
    John

  • I am unable to get past the Terms and Conditions in the new update. I have hit agree several times but can not get past that part. What do I do next?

    I am unable to get past the terms and conditions part of the upgrade. I have hit agree several times. What do I do?

    Scroll down to the bottom of the terms and conditions, then the Agree button will light up and you can proceed.

  • How do I install the sim card in the iphone 4s?

    how do I install the sim card in the iphone 4s?

    See here: http://support.apple.com/kb/ht5163
    It talks about removing the SIM but the process is the same for putting it in.

  • Can i insert a sim card in the Ipad model A1395

    CAN I INSERT A SIM CARD IN THE IPAD MODEL A 1395

    No it is the Wi-Fi only model...
    http://www.everymac.com/systems/apple/ipad/specs/apple-ipad-2-wi-fi-specs.html

  • HT201407 I just received my new iPhone 5c and cannot open it to insert the SIM card.  The instruction say to "slide to open" but I cannot open it!  Please help!

    I just received my new iPhone 5c and cannot open it to insert the SIM card.  The instructions say to "slide the back off" the phone but I cannot get it to open.  Please help? 

    Huh...? Where did you get it? And what instructions are you looking at? The instructions do NOT tell you to slide the back off. The back doesn't come off. The Sim slot is on the right side of the phone. You use the tool that came with it or a paper clip to eject the SIM tray and put your Nano-SIM in it.

  • Will the sim card in the N97 fit in the N8?

    Hey guys just a silly little Q dose the sim card from the N97 fit in the N8?? i ask this as my N97 is playing up after 7mth and has been sent off to get fixed and I wasnt ofters a replacement phone (thanks for the no service allphone) so I need a phone to use while my phone is getting fixed so I thought I would buy the N8. So can I use my sim in it??? i dont know much about it lol... I am with vodaphone if that helps lol... thanks so mucn for your help guys......
    Solved!
    Go to Solution.

    @ebany10
    Welcome to the forum!
    Yes, it does fit with one proviso that it hasn't been cut down and fitted in adaptor at some stage:
    http://www.nokia.co.uk/support/product-support/n8-00/nokia-n8-how-to/get-familiar-with-your-device/m...
    Happy to have helped forum with a Support Ratio = 42.5

  • HT1688 I have a damaged I-Phone and I need the contents of my calendar off of it. I did not have Mobile me at the time.  Can I swap out the sim card from the broken phone to a new phone and recover this calendar?

    I have an older I-Phone (3G) that for some reason the body of the phone has split in two.  This phone was a business phone and it had a lot of important information on it. I have a second phone that is also a 3G.  On the broken phone there is a lot of important information that I need in my calendar. Im not worried about anything else but the calendar.  I didn't have the Mobile Me account at that time or I would be having this problem. Does anybody know if I can ust switch out the sim cards. I just need to recover the old calendar, so im hoping that the calendar will transfer when I switch the sim card into the good 3G. If that doesn't work does anybody know of anyway that I can retrieve this information off of this phone?

    Nothing is stored on the sim card on an iPhone.  If you backed up to your computer the backup will contain your calendar events.  Otherwise, if your phone isn't functioning there is no way to back up or extract your calendar at this point.

  • I have just upgraded my Ipad2 to the latest operating system and on restarting it is some foreign language and is asking for the sim card number when I don't have a sim card. What do I do?

    I have just upgraded my Ipad2 to the latest operating system and on restarting it is some foreign language and is asking for the sim card number when I don't have a sim card. What do I do?

    i have to apologize up front for the cheeky response. but i just couldnt resist. if your ipad is speaking in tongues. i would call a priest and perform an exorcism on it first.

  • The iphone 3GS dosen't accept the SIM card and the WIFI and Bluetooth is hidden..Please give me answer ..

    the iphone 3GS dosen't accept the SIM card and the WIFI and Bluetooth is hidden..Please give me answer ..

    is the iphone sim locked to another network?

  • I don't have the sim card for the htc thunderbolt, will i be able to update to ics?

    I dont have the sim card for the htc thunderbolt, will i be able to update to ics without it or do i need it?

    Yep, it wouldn't even look for an update without the SIM card.

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

Maybe you are looking for

  • Assigning User to a Group.

    Hi All, We have installed EP 7.0. We need to add the user "xxx" to the group "SAP_HR_LSO_DEVELOPMANAGER". We searched for the user "xxx" and click on modify button to edit the Assigned groups. But the Add button is disabled for the Admin. How to enab

  • Using FCP for live video feed

    Hi, I'm currently shooting with the new HVX200 Panasonic camera. We're using a small, 7" hand-held HD monitor to use for focus-pulling, but I'd like to be able to use a computer monitor or laptop for a live video feed. (director's monitor) We've cons

  • Can we Edit #BOX_BODY# Substitution String?

    In apex 4.02 all templates #BOX_BODY# substitution string are used, I need to modified that string. Outer #BOX_BODY# if I add anything like Font size, table format and anyting html function not accepted that template string. Can any one help for this

  • Director crashing in Mavericks Mac OS 10.9

    I currently sell a product created in Director 11.5 for Mac and I am getting reports of the projector crashing. Is there a solution or an update to Director? I would be interested in finding out from others if Director 12 crashes as well. The app pol

  • Workflow question - SWWWIHEAD TABLE

    Hello Workflow Gurus,    Is there anyway I can get the current work item ID given the fact that I have the top work item ID. Right now I am using table SWWWIHEAD but I am facing runtime issues. I was using the function module SAP_WAPI_WORKITEMS_TO_OB