How do I maintain storage location for Planned Orders in APO
Dear all,
Can you help us in maintaining storage location for planned orders in APO. The storage location from material master need to be updated in product master of APO and the same shall be automatically picked from product master during Supply Network Planning run.
Material master CIF is live.
We have got the following content error in CIF consistency check. How ever this is nt goging to harm any thing, but we would like to maintain in both R/3 and APO.
Error:
Plant and storage location in SAP APO: 2004
Plant and storage location in SAP R/3: 2004 FGPA
Thanks in advance
Ram Mohan Rao Kolanupaka
Instead of maintaining additional master data, i would rather use CCR user exits to switch off comparison of planned order at storage location level if the APO storage location is blank. This way you would not have to make changes to PPMs everytime a new scale out of the solution happens.
In SE18 check the user exit /SAPAPO/CIF_DELTA3 (interface RELEVANT_FOR_COMPARE_ORDHEAD)
If it is not possible to switch off this comparison then I guess changing master data is the next step. Do explore with a developer though about the first option.
Similar Messages
-
Where and how to find the storage locatation for the consignment stock
where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no - werks - batch
xxx sg11 - 200352ac
table : mchb
material no - werks -lgort - batch
xxx sg11 sg10 200352ac
xxx sg11 gs11 200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN -
How BOM and routing is selected for Planned order and Production order?
Hi,
Can any1 plz tell me how BOM and routing is selected for a planned order and production order. ?Hello Mathisuthan,
BOM and Routing selection for the planned order and production order through production version, If u have more than one BOM and more than one Routing then u can maintain this information as Production Version in the system.
Production version you maintained
MM01/MM02 -- MRP4--- Production version
Or you can create Production Versions in Mass also with Transaction Code "C223"
In the case no production version maintained/created for the material, then system by default will pick the first BOM and routing.
I hope this information helpful to you.
Regards
Umesh Mali -
How to find out manual deletion of planned orders in APO.
Planned orders are created on multiple bom levels when we call CTP from GATP for sales orders. For particular sales order there is no planned ordere at lower level. Dependent requirement is there which is uncovered.
I want to find somebody has deleted this planned order manually in apo. How to find out the same?
Regards,
SantoshHi Santosh,
If you suspect that the planned order was created but later on deleted manually, there is a cross check you can do to determine that.
In case of MATP, System uses the higher level Planned Order number to create the Dependent Demand at the lower level and only when this dependent demand is covered by a planned order it assigns the corresponding planned order number to it. So if you see the dependent demand number with same number as the higher level planned order for which it was created, you can be sure that a planned order was not created to cover the dependent demand that you see uncovered.
If the dependant demand number is not same as the planned order at higher level, then the planned order to cover the dependent demand was deleted.
I guess CTP also works the same way. If you're unsure about this, test it out.
Hope it helps.
Regards,
Mohan -
How do I control storage location for iPhoto, iDVD and iMovie
My primary drive is getting full and I note that my User file has all of the iPhoto images, iDVD projects and iMovie projects. I want to take these collections off the main drive and place them on one of my external hard drives to open up space on my primary drive (the one with the Applications, etc.) How do I control where my images and movies are filed when I use the above applications? I do not recall designating any save function to this folder or drive. How can I save these files in a location on my external drives in tthe future? If I move these images and movies from my User file, will that cause a problem for iPhoto or iMovie or iDVD in finding the files in the future as I use these applications?
Hi
They are using three different concepts - VERY UNLIKE APPLE to do like this !
• iPhoto saves in a iPhoto library and there can be more than one - using the alt-key during up-start let's You to select which one You want to use and on Main Hard Disk at Root level in Photo folder.
• iDVD - Save an iDVD Project file (sort of folder) where You want to find it.
• iMovie - saves Event's and Project's in iMovie Event's resp Project's folders AND ONE MUST NOT alter or move anything in them or location of them - Moving Event's and Project's MUST BE DONE inside the iMovie Application !
So while one can move iMovie Event's and Project's to another Mac - the needed Photos (and audio from iTunes) will be missing and very hard to get iMovie on second Mac to find and recognice.
Yours (also confused - and moving step by step into the OLD FinalCut realm - Where everything makes SENSE !)
Bengt W -
Hi everyone,
I have 2x physical servers running Hyper-V 2012 R2. Each hosts several virtual machines. The VHDs of the VMs are stored on several dedicated physical disks to have a performance boost. For exampe if VM A has two VHDs attached I made sure that the VHDs are
on different physical disks to have them not slow-down each other in case of intensive disk accesses.
So far so good. I was looking forward to the replication-feature. The idea is to have the two physical servers have their primary running VMs being replicated to the other physical server and vice-versa. I was hoping to have the chance to choose for each
individual VM where the replicated VHD will be stored. But instead I can only see the one location/path which is configured in Hyper-V Manager when I activate the replication-feature on the server.
Is there by any chance a way how to select the storage location for each VHD/VM if using the replication-feature of Hyper-V 2012 R2?
Thanks in advance.
Cheers,
SebastianSecondly, you could replicate different VMs to different storage locations to perform some of the disk balancing you are trying to perform. Lastly, you could copy the vhd file to a different location
before starting the VM.
.:|:.:|:. tim
Hi Tim,
thanks for the reply. Sorry, but I had some other tasks to take care of, so I wasn't paying enough attention to this thread.
The part I quoted from your reply sounds exactly like the action I'd like to perform, but as you pointed out before this should not be possible.
How can I perform the action (replicating each VM to a storage location) as you mentioned secondly? To sum it up again:
2x physical machines carrying severel HDDs
8+ VMs spread to run on the 2x servers
when setting up replication I can only set the storage-location from server A on B and vice versa B on A
Thanks again for your reply.
Cheers,
Sebastian -
How to find out the plants and storage location for a given company code
hi
How to find out the plants and storage location for a given company codeHi
Check for Assignem,ent of Plant & compnay code in OX18
& for Combination of Plant & Storage location in OX09
The total org structure can be viewed in EC01 - Click on Structure -> navigation
& Continue, Click on the Compnay code & the wole structure can be viewed
Thanks & Regards
Kishore -
Storage Locations from Planning
Hi Gurus,
I want to avoid some storage locations from Planning, if any dependent requirements come specif for those storage locations I want no procrurement proposals to be made. how to do that.
Please suggest.
SriniDear Srini
1) In MMSC transaction there is a setting -MRP select 1 storage location stock excluded from MRP
2) In MRP View 2 or in Bom item Maintain the Production storage location fied with is specific storage location.Your sceanrio will work
pl reward points if useful
Prabakaran K -
Open a storage location for a material
Hi,
how can I open a storage location for a material ?
Is also possible to do it automatically ?
RegardsA storage location is customizing, this is in general open to take any material.
depending on the customizing setting for Auto.create storage location you allow SAP to add the storage location view to your material master automatically with the first movement of a material to a storage location or not.
if you dont allow that, then you have to maintain the storage location view in material master manually for each storage location before you can post a movement for this material in a certain storage location. -
Maintain Storage Location Description in Multiple Languages
Dear Experts,
I need to maintain Storage Location Description in both EN and DE (Denmark) Languages.
Kindly suggest me whether this is possible?
If yes, please let me know how can we do this.
I have tried doing this but I could maintain in only one language (either EN of DE)
Regards
ShashidharHi Jurgen,
That was really helpful.
My issue is, when I login with DE Language, I want to see the German Description for both Storage Location and Plants
When I login with EN, need the descriptions to be in English.
Is this possible?
Regards
Shashidhar -
How to change the storage location in Lightroom 3.6.?
How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
Kind regards, KarinWould you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
What if I name them f.i. like ...
2013-09-11_Austria_1_mountain.jpeg
2013-09-11_Austria_2_mountain.jpeg
2013-09-11_Austria_3_valley.jpeg
I would NOT do this. I would not change the file name.
I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
However, let's look at the big picture. I think there are three different methods of organizing
Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
Some combination of 1 and 2
You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
.. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
So I have to create two folders - one with the originals and one with the edited exported photos?
No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
Wow, you really need to think about: Why are you using Lightroom?
Could you explain this to me? Why are you using Lightroom?
If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
It is starting to sound to me like Lightroom is not the right software for you.
Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload. -
Re: Creation of storage location for halb which was not assigned primarily
Creation of storage location for halb, every thing processed with raw materials for production orders reg fert and even settled. Later a storage location is to be created for halb. When I created storage location for halb and when I want to post initial stock through MB1C I am getting error saying material type and storage location not maintained. Can any one solve my problem. Thanks in advance.
Hi Vachanala,
Are the material masters of your materials extended to the new storage location / have you defined automatic creation (for movement) in customizing (SPRO > Material Manegement > Inventory management & PI > Automatic movements > Create Storage Location Automatically)?
If the material masters are not extended you can't book those materials to that SL.
BR
Csaba
<b>material master</b>
http://help.sap.com/saphelp_46c/helpdata/en/ff/515ee849d811d182b80000e829fbfe/frameset.htm
<b>automatic creation of storage data</b>
http://help.sap.com/saphelp_46c/helpdata/en/a5/6330f243a211d189410000e829fbbd/frameset.htm -
How can i add STORAGE LOCATION field which is not...............
hi,
sap gurus,
good morning to all,
how can i add STORAGE LOCATION field which is not in the standard tables namely
KOMP, KOMK, and KOMG.
how to include it in our FIELDS FROM FIELD CATALOGUE.
if we include this field is there any impact on the standard tables.
plz let me know this.
bcz
we are selling our products in two ways
(1). one is straight from factory ie direct sales from factory
if customer asks for excise invoice then we will sell thru factory and keeping freight in mind we will
deliver him which ever is economical either rail or road.
before coming to second case of selling the goods
we will do STOCK TRANSPORT ORDER from plant to different storage locations.
if we did STO thru road we have to sell the goods thru road only.
if we did STO thru rail we have to sell the goods thru rail route only.
(2). if the customer is not asking any excise invoice then we will send the goods thru depo/storage
location which is not registered under excise.
if the goods came by road then it will be delivered by road only.
if the goods came by rail then it will be delivered by rail only.
my logic here is
basing on the
storage location, transportation types, and distance i want to create condition record
that captures exact frieght at the sales order level.
confirm whether i am right or wrong.
regards,
balaji.t
09990019711.Hi,
It is not recommended to add new fields to any SAP standard tables. It disturbs the whole SAP functionality.
But if you have no choice expcept to change the standard tables to meet your requirement - then you need an access key to modify the object, which is available from the market place.
Nevertheless, the better option is to create a 'Z' table with the required fields and use that accordingly.
Changing standard tables will have serious impact when you apply patches or do an upgrade on the existing functionality.
REWARD POINTS IF HELPFUL
Regards
Sai -
Maintain Storage Location in IS Retail
Hello everyone,
I'm newbie in IS retail... i want to ask about storage location in DC or site... if we create DC and store, we can't transport it with tcode stms, but we must transport itu using wbte tcode... my question is i want to maintain storage location, i go to the menu : financial accc (new) --> material management --> maintain storage location, is that right? and then if i want to transport that sotrage location, i user the stms tcode or wbte and wbti tcode?
Hope your replies soon guys, really need your help...
Regards
Kenzo00Hi Kenz,
First, you have to create Reference DC and Site to simplify the process. When you copy, the following data is copied from the reference site;
(1) General site data
(2) Calendar
(3) Valuation / Inventory Management
(4) Listing
(5) Requirement Planning
(6) Distribution
(7) POS Interface
(8) Layout
After creation, you have to carry out Site Export and Import using transaction code WBTE
Here, you can execute above transaction codes in background or in foreground.
Then system creates one file BTRA in path: /usr/sap/trans/tmp in the exported system.
Log on to the target system to Import the site using transaction code WBTI
Before importing you need to move the file from Export system to Import system under the same path.
Execute it in Test mode and see any errors, then remove the tick of test run and execute to Import the site.
Regards - Muralidhara -
How to change the storage location using BAPI_OUTB_DELIVERY_CHANGE
Hi !
I want to do batch split in the delivery using BAPI_OUTB_DELIVERY_CHANGE.
Can anyone tell me how to pass/change the storage location of each batch item.
Is there any other BAPI that can do the batch split and populate the storage location also for the split batches?
Regards,
Firoz.Hi all,
BAPI_OUTB_DELIVERY_CHANGE can be used to do batch split and updating storage loaction against each item of an outbond delivey.
I have done that in the folllowing way:
1 > Firstly i have updated the storage location for each delivery item using 'BAPI_OUTB_DELIVERY_CHANGE' passing some mininal parameters.
Fetch the item details from LIPS table based on the outbound delivery and pass the corresponding fields to item_data, item_control and item_data_spl parameters and passed into intenal table li_lips.
Loop at li_lips inti lw_lips.
lw_item_data-deliv_numb = lw_lips-vbeln.
lw_item_data-deliv_item = lw_lips-posnr.
lw_item_data-material = lw_lips-matnr.
lw_item_data-fact_unit_nom = lw_lips-umvkz.
lw_item_data-fact_unit_denom = lw_lips-umvkn.
lw_item_data-base_uom = lw_lips-meins.
lw_item_data-sales_unit = lw_lips-vrkme.
lw_item_control-deliv_numb = lw_lips-vbeln.
lw_item_control-deliv_item = lw_lips-posnr.
lw_item_data_spl-deliv_numb = lw_lips-vbeln.
lw_item_data_spl-deliv_item = lw_lips-posnr.
lw_item_data_spl-pick_denial = 'X'.
lw_item_data_spl-stge_loc = v_lgort.
"(This would be your Storage Location which you want to be updated)
Appending work areas into internal table to pass as parameter
APPEND lw_item_data_lgort TO li_item_data_lgort .
Appending work areas into internal table to pass as parameter
APPEND lw_item_control_lgort TO li_item_control_lgort.
Appending work areas into internal table to pass as parameter
APPEND lw_item_data_spl_lgort TO li_item_data_spl_lgort.
endloop.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb = v_delivery_no.
lw_header_control-deliv_numb = v_delivery_no.
lw_header_tech_control-upd_ind = 'U'.
Calling BAPI to change the Storage location
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
EXPORTING
header_data = lw_header_data
header_control = lw_header_control
delivery = v_delivery_no
techn_control = lw_header_tech_control
TABLES
item_data = li_item_data
item_control = li_item_control
return = li_return_change
item_data_spl = li_item_data_spl.
Calling BAPI to committ the task
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
2> Then i have used the same BAPI again 'BAPI_OUTB_DELIVERY_CHANGE' to do the batch split/update batch only(if required) and change the Actual Delivered Quantity.
Here you have to pass the same thing along with actual delivery qauntity and different batches to do batch split.
Here it is assumed that Batch numbers, actual delivered quantity are coming from an internal table i_lqua.
Looping through Internal table to get Bin details
LOOP AT i_lqua INTO w_lqua .
Clearing work area before use
CLEAR : lw_item_data, lw_lips, lw_item_control, lw_item_data_spl.
Reading table comparing metrial number
READ TABLE li_lips INTO lw_lips
WITH KEY matnr = w_lqua-matnr BINARY SEARCH.
If read is successful, passing values from table
IF sy-subrc EQ 0.
Passing the delivery details into Item level table
lw_item_data-deliv_numb = lw_lips-vbeln.
lw_item_data-deliv_item = lw_lips-posnr.
lw_item_data-material = lw_lips-matnr.
lw_item_data-batch = w_lqua-charg.
lw_item_data-dlv_qty = w_lqua-verme.
lw_item_data-dlv_qty_imunit = w_lqua-verme.
lw_item_data-base_uom = w_lqua-meins.
lw_item_data-hieraritem = lw_lips-posnr.
lw_item_data-usehieritm = 1.
lw_item_data-fact_unit_nom = lw_lips-umvkz.
lw_item_data-fact_unit_denom = lw_lips-umvkn.
lw_item_data-sales_unit = lw_lips-vrkme.
lw_item_control-deliv_numb = lw_lips-vbeln.
lw_item_control-deliv_item = lw_lips-posnr.
lw_item_control-chg_delqty = 'X'.
lw_item_data_spl-deliv_numb = lw_lips-vbeln.
lw_item_data_spl-deliv_item = lw_lips-posnr.
lw_item_data_spl-stge_loc = w_lqua-lgort.
lw_item_data_spl-pick_denial = 'X'
Appending work area into internal table to pass as parameter
APPEND lw_item_data TO li_item_data.
Appending work area into internal table to pass as parameter
APPEND lw_item_control TO li_item_control.
Appending work area into internal table to pass as parameter
APPEND lw_item_data_spl TO li_item_data_spl.
Clearing work areas after use
CLEAR : lw_item_data, w_lqua,lw_item_data_spl,lw_item_control,
lw_vbpok, lw_lips.
ENDIF.
ENDLOOP.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb = v_delivery_no.
lw_header_control-deliv_numb = v_delivery_no.
lw_header_tech_control-upd_ind = 'U'.
Calling BAPI to change the Batch/Batch-Split/Delivery Quantity
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
EXPORTING
header_data = lw_header_data
header_control = lw_header_control
delivery = v_delivery_no
techn_control = lw_header_tech_control
TABLES
item_data = li_item_data
item_control = li_item_control
return = li_return_change
item_data_spl = li_item_data_spl.
Calling BAPI to committ the task
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
This is the only way which i found as better way to do the Batch split and updating storage location togetherly.
I hope this code will help you.
Maybe you are looking for
-
My new computer will not recognize my iPod Nano. The Nano was used on the old computer. I also have an iPod Touch and this is recognized.
-
CSS runs at user log on with UAC, wants to restore keys, requires non-existant user as admin.
I am not sure exactly when this happened, but I am pretty sure it happened after the last system update that I accepted from Lenovo. Now, every time I log on to Vista (Ultimate, SP1) I get a UAC prompt, then when I accept, I end up with an OK dialog
-
I bought my iPod Touch 4G mid year and have used it for non-music related functions on various versions of iOS4 without "too" much aggro. I have 3 PC's (2 x Desktop Windows 7) (1 x Notebook XP) iTues (latest) installed on 1 of the Win7 Desktops and t
-
How to add sum in dynamic alv ?
hello , i create dynamic alv , by using FIELD-SYMBOLS , but my columns are char type , and the SUM an SUBTOTAL not work . how i can tern the internal table that build with char columns to be numeric (like BSIK-WRBTR)?
-
PC user w/ Audio wma files and Itunes MPEG-4 audio files in separate folder
My husband has an mp3 player that uses the wma format, so we have a lot of songs in the audio folder. Initially I simply transferred all of them into the itunes folder and they were converted to mpeg-4 format. Now as more files have been added to the