How do I set up a virtual server with a time capsule?

I am trying to set up a wireless camera in my house to be viewed from away from the house.
I cannot seem to figure out port forwarding/virtual serving on the settings of my time capsule. I had no issues doing it with my old router. Does time capsule have that abilty?
I have Macs and PCs,

I figured it out.

Similar Messages

  • How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

    How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

    Set up your "main" router to use the OpenDNS servers, and the Time Capsule will automatically pick up those settings. No configuration is needed on the Time Capsule.

  • How do I set up a guest network on my Time Capsule?

    how do I set up a guest network on my Time Capsule?

    If that is the case, then......
    Open Macintosh HD > Applications > Utiltiies > AirPort Utility
    Click Manual Setup
    Locate the Guest Network tab located just below the row of icons and click on it
    (If you do not see a Guest Network tab....you likely do not have the Time Capsule connected to a simple modem)
    Enter a check mark next to "Enable Guest Network"
    Type in a name for the Guest Network
    Enter the password and confirm
    Click Update to save your settings and Time Capsule will restart in 25-30 seconds

  • How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

    How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

    Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

  • Setting up an Airport Express with a Time Capsule

    Merry Christmas! I received a new Airport Express for Christmas. My intention is to use it to stream music to my stereo. I have to admit that setting the AE up was not as simple as I had hoped it would be. I do have it working but I would like someone with more experience in this area to validate what I have done.
    My wife and I each have MacBooks and we have a Time Capsule as our base station in the den. I would like to use the AE to stream music to my stereo which is in the living room. I would also like the AE to act as a "booster" to my TC, which I think is called "Extending a wireless network".
    Here are my questions concerning the settings I have used in Airport Utility:
    In TC, under AirPort, and the Wireless tab, I have checked the box for "Allow this network to be extended". Is that necessary?
    In AE, under Airport, and the Wireless tab, there are a number of choices in the pulldown for Wireless Mode. I know I do not want to "create a wireless network" since that is what my TC is for. But all three other choices seem valid for what I want to accomplish -- Participate in a WDS network, Join a wireless network, or Extend a wireless network. I chose Extend a wireless network. I also checked the box under Network Name that says, "Allow wireless clients". Are these settings correct?
    Here's the problem I'm having with things set up as I described above. AirTunes works fine. But if we close either of the MacBooks (put them to sleep) and open them in the living room which is closer to the AE, we seem to lose internet connectivity. When we open a browser or click on a link, it starts to load but then freezes. If I then walk the MacBook into the den, closer to the TC and restart the Airport or put it to sleep and wake it, its fine. Also, if we work long enough in the living room closer to the AE, it will also loose connectivity. I can sit in the den near the TC without any dropping.
    Any suggestions on what the proper Airport Utility settings should be for my TC and AE would be greatly appreciated.

    Your biggest mistake is confusing signal strength with signal quality. The signal indicator indicates strength and nothing else. You need to be using iStumblr to look at SNR (Signal to noise ratio).

  • How do you replace a Virgin wireless router with a time capsule?

    Hi Folks
    i have just bought a brand new 1tb time capsule yesterday and im trying to connect it too my virgin modem and replace the virgin wireless router i already have.....i thought it would be an easy setup of just plugging in the ethernet cable into the time capsule..but this has not worked??..can this be done?? i have restarted all devices too!...i am now clueless!
    the the time capsule has backed up my hard drive (mac book pro) with no problems!
    kind regards
    kathdol

    Are you talking about a separate modem and Virgin router, rather than their wretched 'Superhub' (modem and router combined) - the latter is a whole different can of worms.
    Assuming the former, you should be able to remove the Virgin router and plug your Time Capsule into the modem: you will need to power down the modem and leave it for a few minutes (to forget the MAC address of the Virgin router), then plug in the TC and power up the modem. Make sure that the TC is set to 'Share a public IP number', not 'Distribute a range of IP numbers' or 'Bridge mode'. (If the interface is the same as the Airport Express it's 'Manual Setup'>'Internet' (in the toolbar)>Internet settings.

  • How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

    How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

    You need to get the settings for your email from your email provider and enter them in Internet Accounts (System Preferences). Many of the common systems are already available, all you need is a password and an email address to set them up.

  • How to load data from a virtual cube with services

    Hello all,
    we have set up a virtual cube with service and create a BEx report to get the data from an external database. That works fine. The question is now:
    Is it some how possible to "load" the data from this virtual cube with service (I know that there are not really data...) into an other InfoCube?
    If that is possible, can you please give my some guidance how to set up this scenario.
    Thanks in advance
    Jürgen

    Hi:
    I don't have system before me, so try this.
    I know it works for Remote Cube.
    Right Click on the Cube and Select Generate Export Data Source.
    If you can do this successfully, then go to Source Systems tab and select the BW. Here, Right CLick on select Replicate DataSources.
    Next, go to InfoSOurces, click on Refresh. Copy the name of Virtual Cube and add 8 as a prefix and search for the infosource.
    If you can see it, that means, you can load data from this cube to anywhere you want, just like you do to ODS.
    ELSE.
    Try and see if you can create an InfoSpoke in Virtual Cube. Tran - RSBO.
    Here, you can load to a database table and then, from this table, you can create datasource, etc.
    ELSE.
    Create query and save it as CSV file and load it anywhere you want. This is more difficult.
    Good luck
    Ram Chamarthy

  • How do I connect to a terminal server with my mac book pro

    How do I connect to a terminal server with my mac book pro

    Use the Remote Desktop icon on the tray and make sure to use the Fully Qualified Domain Name (FQDN) on the 'name of server' field.  If that does not work then use the IP address to connect.

  • How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

    How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

    This Apple support document provides good general information on configuring different types of neworks using multiple AirPort routers.
    http://support.apple.com/kb/HT4145
    In particular, you would want to focus on the information regarding a "Roaming Network"

  • How do I set up a Apple TC with a Verizon FIOS wireless modem model  Actiontec 424wi F series.  Does the wifi in the modem have to be shut off and will it effect the FIOS tv?

    How do I set up an Apple TC with a Verizon FIOS wireless modem model MI424wr F.  Does the wifi have to be turned off in the modem and then bridge it to the TC?  Will FIOS tv be effected?

    Your first call should be to Verizon support to ask them if you turn off the wireless on the Actiontec router....will it affect any of the features/functions of the FIOS system?
    If yes, then it would be best to leave the Actiontec router "as is" and connect the Time Capsule using Ethernet in Bridge Mode as a back up device only (wireless is turned off on the Time Capsule).
    If you want to use the dual band (and likely much faster) wireless capability of the Time Capsule, then you should turn off the wireless on the Actiontec device to help prevent wireless interference effects that will likely occur when two wireless routers are in close proximity to each other.
    Again, the Time Capsule would be connected to the Actiontec router using an Ethernet connection from one of the LAN <-> ports on the Actiontec router to the WAN port (circle icon) on the Time Capsule. Configure the Time Capsule in Bridge Mode as well in this type of configuration.
    Bottom line....what Verizon says will pretty much dictate how you can set up the TIme Capsule.

  • How do i set up my apple id with itunes and the appstore?

    How do i set up my apple id with itunes and the appstore?

    iTunes 10 for Mac: Set up an Apple ID account for use in the iTunes Store
    http://support.apple.com/kb/PH1726

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • How do i set up my apple tv with a older tv that has only 1 hdmi outlet? i have the DVR box, the modem, router...

    how do i set up my apple tv with a older panasonic tv that has only 1 hdmi outlet? i have the DVR box, the modem, router...

    you either need a get a new TV with more than 1 HDMI input or find an HDMI switch that is compatible with both the appletv an your DVR.

  • How do I set my mouse to open with a double click

    How do I set mouse to open files with double click instead of right click and enter open option every time ?

    Open with a double-click is the default.
    To get it to work properly, adjust the double-click speed [ Slow <---> Fast ] until your "natural" double-click motion is recognized as a valid Double-click.
    Threshold set too fast and your natural motion will not be seen as a Double click.
    Set too slow and things like an impatient second click for selection will be mistakenly seen as a double-click instead.

Maybe you are looking for

  • Partner in inbound delivery

    Hi, I'm creating an inbound delivery with trx VL31N, I clicked on header button, then I clicked the Partner tab and if I click on Propose alternatives button the system prompts *There are no alternatives available for Vendor X*. I want the system pro

  • Ocfs with standard edition

    Dear all, We need to install 11.2.0.2 RAC on linux rhel Red Hat Enterprise Linux v5.5,x86-64 (64 bit machine) and client needs standard edition. Can I use OCFS with standard edition or do I have to use ASM ? kai

  • Where do I change the dpi settings for creating a jpg in Bridge CS5?

    I upload jpgs to an online site to be viewed in a browser. I've been using Bridge CS5 to batch process the jpgs from high quality pdfs.The settings I see when I do the settings to create the jpgs will only give me Maximum settings and the option to s

  • Where's the "Log Out" button gone? I need to log out NOW in order to access my other in-box - URGENTLY!

    When you make changes, it would be helpful to provide an option NOT to accept them, or at very least, a flag that tells you how to perform the operation that was previously easy. This worked fine with the "message priority" arrows, but the loss of th

  • CUP 5.3 - Role Reaffirmation for roles coming from ERM

    Hi All, our source system for roles in the CUP is the ERM. can i do Role Reaffirmation for those  roles ? because i saw that they don't come with validity dats Thanks Yudit