How Route List work?

Hey,
I would like to add 2 MGCP gateway in a Router list.
But, How CUCM knows if specif gateway is up? By Network conectivity, E1 port status or both?
thanks.

Hi Jean,
I just captured the snapshot from cisco document.
Route List allows Cisco CallManager to hunt through a list of Route Groups in a configured order of preference. A Route List consists of an ordered list of Route Groups. Route Lists expand the Route Groups concept and allow the user to order and prioritize your route groups. Multiple Route Lists can point to the same Route Groups. A Route List chooses a path for call routing and points to prioritized Route Groups.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800949f0.shtml
regds,
aman

Similar Messages

How do I Get My Router to Work With iChat ? FAQ 2

Replaces iCh: FAQ 2 How to get my router to work with iChat?
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have.
Routers seem to fall into two categories
Those that work straight from the box. See Apple Doc 93333
NOTE
This Doc has not been updated since Jan 04
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255).
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
DMZ Demilitarised Zone
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN)
NAT Sometimes called NAPT and related to Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You will need to set an incoming IP address (Usually 0.0.0.0 for any outside server), a port that data will arrive on, the Inside computers IP address (your computer) and the port it will deal with the data on and the protocol it will use.
iChat uses TCP and UDP so some devices will need the settings done twice, once for each protocol.
See Apple Doc 93208 for more information.
Note:
Note 1 should read:
1. All iChat AV traffic is UDP except for ports 5190 and 5298, which need to be open for both TCP and UDP; and 5220, 5222, which need to be open for TCP only.
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678. When you click on the invite window the process moves to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP
Wireless
Here you will have to read around but this Apple Doc 58514 might be a good starting place.
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my pesonal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding.
Ralph
G4 Dual 1Ghz MDD with extra HDs X3. Mac OS X (10.4.3) Have you read the iChat FAQs ?? They have moved to Users Tips

Replaces iCh: FAQ 2 How to get my router to work with iChat?
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have.
Routers seem to fall into two categories
Those that work straight from the box. See Apple Doc 93333
NOTE :This Doc has not been updated since Jan 04
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
DMZ Demilitarised Zone
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN)
NAT Sometimes called NAPT and related to Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You will need to set an incoming IP address (Usually 0.0.0.0 for any outside server), a port that data will arrive on, the Inside computers IP address (your computer) and the port it will deal with the data on and the protocol it will use.
iChat uses TCP and UDP so some devices will need the settings done twice, once for each protocol.
See Apple Doc 93208 for more information.
Note:
Note 1 should read:
1. All iChat AV traffic is UDP except for ports 5190 and 5298, which need to be open for both TCP and UDP; and 5220, 5222, which need to be open for TCP only.
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678. When you click on the invite window the process moves to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP
Wireless
Here you will have to read around but this Apple Doc 58514 might be a good starting place.
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my pesonal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding.
With thanks to Macmuse.
Ralph
G4 Dual 1Ghz MDD with extra HDs X3. Mac OS X (10.4.3) Have you read the iChat FAQs ?? They have moved to Users Tips<</a>/span>

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

How does this Linked List work?

Hi.
I wonder how this linked list work
import java.util.Scanner;
public class LinkedList {
    public static void main(String[] args) {
        Scanner in = new Scanner(System.in);
        Elem front = null;    // First element of list.
        Elem back = null;    // Last element of list.
        while (in.hasNext()) {
            String word = in.next();
            Elem e = new Elem();     // Create a new list element.
            e.data = word;           // Set the data field.
            if (front == null) {
                front = e;            // Back element will be set below.
            } else {
                back.next = e;       // Link last elem to new element.
            back = e;
        System.out.println("*** Print words in order of entry");
        Elem curr = front;
        while (curr != null) {
            System.out.println(curr.data);
            curr = curr.next;
class Elem {
    public Elem next;    // Link to next element in the list.
    public String data; // Reference to the data.
}Does anyone know how this allocates memory?
I feel strange because it's just front = e
and back = e
but it never says anything like front.next = back or something..
Can anyone help me on this?

Does anyone know how this allocates memory?Memory is allocated on this line:            Elem e = new Elem();     // Create a new list element.
I feel strange because it's just front = e
and back = e
but it never says anything like front.next = back or something..Well, it doesn't need to. Setting .next is taken care of after the initial element is added. It never explicitly says front.next = back because front.next is set when the second element is added. It's set implicitly, on this line:                back.next = e;       // Link last elem to new element.It's implicit in that at that point front and back point to the same element.

How to maintain time spec.of operations in routing and work centers

Dear consultants,
We dont have any time specifications in routing or work center ..
we just create an order and the execution of the production involves many operations....
now we want to be specific about the time of operations as the need is to track the operations.( In the sense which of the operations are delayed).....
How and where should i do these in the routing and workcenters..
Please explain in detail....
Karthick

Hi Karthick,
In your work center in basic data page you maintain std. value key eg: SAP1, this has Setup Machine & Labor fields. In the default values page you specify the unit of measure Eg: HR
Now when you add this work center in your routing operation page, you will find Setup Machine & labor, here you maintain the time required for each of the process.
Now while doing confirmation via co11n, you inform the user to specify the time actually spent on each of the activity. In OPK4 for order type - plant combination you can specify a few defaults such as propose the value etc.
Hope the above is clear.
Regards,
Vivek

How does it work the reading (list) function on a mac?

Hello there,
Well, I was wondering how does it work, I mean, What's necessary to get this funtion work.. When you're reading something you see that there's is an options it lets you to get in a reading mode but sometimes some web pages won't let you do that
Why?
How does it work?
Shortcuts:
To show reading mode (shift + comand + R)
To show the list bookmarks (shift + cmd + L)
Thank you very much

Then there's something going on with Safari on your Mac.
Try troubleshooting Safari extensions and third party plugins.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

How to get the wireless router to work when i change to new modem and internet connection

I already set up my wireless router in my macbook but then moved to a new house and basically have a new internet connection. My internet connection is fine when i connect the ethernet cable form the modem to my macbook. But when i plugged in the wireless router, my computer sees it but will not connect to the internet. I lost my installation CD and i tried to re-install using the dowloaded installation but it goes into error saying i can't re-install if i don't change back to default.. anyway, maybe the solution is simple but it eludes me so please help!
In summary:
1. same macbook
2. same wireless router
3. same internet provider but new connection and modem (since i moved to a different house)
how do i get my wireless router to work? thanks!!!

Who is your Internet Service Provider(ISP)?
If you have a cable connection then follow this link and if you have a DSL connection then follow this link to configure your router.

How do I get my router to work with my new modem?

Since the mods deleted my other post, so no one could see it and think anything bad about linksys's customer service, I will just have to ask a dumb noob question. I am not an IT professional, I am just a regular, non-technical kind of guy. I tried to follow the little guides that they have here, but they leave out too many steps for someone like me, who never does this kind of thing. Or at least, I have to assume that it does, cause it still does not work after I have tried the guide to my router, several times. I have to say that I am at my wits end with this stuff, since my whole home network is down. My router is a WRT54GS V7. But in an attempt to solve my problem, I updated to the latest firmware. My modem is a Motorola 2210-02. My ISP is AT&T. I have tried to get help from them, they do not care. I had to buy a new modem cause their other siemens speedstream 4100B died. So can anyone tell me, step by step, what to do to make my home network up and running again? Sorry about the rant, and the clear frustration, but I can not get any help from anywhere. So this is my last resort.

As your ISP is an DSL Provider, to configure your Router with the DSL Provider there are certain rules which you need to follow to configure your router to work with the DSL Provider..
Connect the Modem to the Linksys router on the Internet Port and then connect your computer to the Router on the LAN Port 1. Login to the Router setup and below you need to change the "Local IP address", By default its 192.168.1.1 so you need to change it to 192.168.5.1 and click on Save Settings....
Once you are done with the settings, you need to power cycle your network. Unplug the power from the Router and Modem, wait for 30 sec and then plug the power to the Modem first and when all the lights are solid on your modem then plug the power to the Linksys router..
Now check if you are Online from your Wired Computer.

Route-List not using 2nd Route-Group when PRI cable is removed from H323 gw

CCM 4.1.3sr3b
Router - 2811 - 12.4.4T2
1 site with 2 gateways, gw1 and gw2
RL has both gateways as RG's.
If gw1 has its PRI cable removed, CCM RL will not pass call into gw2 - Not working.
If gw1 is turned of/Ethernet removed RL will wait the h323 timeout before passing call to gw2 - Working OK.
Is this how H323 works if the PRI is down ?
I know MGCP would work but is not an option.
I would have thought that the H323 gw1 would report that there are no resources available in the cause code and the CCM when then use the second choice in the RL.
Now, this is a service parameter "Stop Routing on User Busy Flag*" which is set to true, but this only relates to intercluster trunks.
I've tried playing with the few voice hunt command on the router with no luck.
Any advice or pointers.
Thanks

Yes, saw this next to the user busy flag, but the help says this about "Stop routing on unallocated number"
"This parameter determines routing behavior for intercluster trunk calls to an unalloc ted number. An unallocated number represents a dialed directory number that does not exist in a Cisco cluster. Valid values specify True or False. When the parameter is set to True and a call that is being routed to a remote Cisco cluster through a route list is released by a remote Cisco CallManager because of the unallocated number, a local Cisco CallManager will stop routing the call to a next device in the route list. When the parameter is set to False, the local Cisco CallManager will route the call to the next device."
Again, it talks about intercluster links, I will try on Monday.
Thanks

TS3274 Not for sure if wireless broadband router is working I have downloaded Itunes on computer I don't think I can coonect to Wi-Fi; any suggestions

How would I know if my Wireless Broadband router is working? I get a list oif Network to choose but then I am asked to put in IP address when not connected to the computer. If I am connected to the computer the computer I am assuming IP address shows but even though I have downloaded Ituned to the computer; I cannot retrieve Itunes or App Storeon the IPAD.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Switched from DSL to CABLE. WRT54G Wireless Router stopped working.

When I switched from DSL to CABLE, my WRT54G Wireless Router stopped working. I am not able to access the router page (192.168.1.1) Also, when I use the set up CD for re-installation, the wizard aborts in the middle saying it can not connect.
I appreciate any help to resolve this problem.
P.S. The router acts like a one-port wired router.

Here is my favorite method for resetting a router to factory defaults, and trying to get it working again.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

Back To My Mac to a Time Capsule through a 3Com Router not working

I have a Mac Book Pro (10.5.7), Time Capsule (7.4.1), 3Com Office Connect Wireless Router (3CRWDR101A-75), a trial subscription to Mobile Me and a 2.5G iPhone (2.2.1).
I have been unable to get BTTM from my Mac on a remote wireless connection to my Time Capsule working - hence this post.
The set up of the Time Capsule was quite straightforward (as I would have expected from Apple) and I quickly established local and remote iCal / Address Book sync between my Mac, www.me.com and my iPhone. I have enabled and am the 2.4 and 5GHz bands on the Time Capsule and the wireless air interface on the 3Com router has been turned off. All of internet and email services on my Mac work well locally and Time Machine work. So far so good.
However, I am unable to 'see' my Time Capsule in Finder from any WiFi network that is not my home network. When at home I have full access to Time Capsule's disk.
My 3Com Office Router 3CRWDR101A-75 is not on the list of supported routers (nor is any other 3Com Router) but it does provide UPnP and NAT as required according to Mobile Sync notes including http://support.apple.com/kb/HT1552 and http://support.apple.com/kb/HT1552. Despite my best efforts, I have been unable to find out from Apple's MobileMe support if there are any minimum requirements for any router to work with Back To My Mac so can't check to see if my 3Com router will ever work with BTTM or not.
Does anyone have any similar experience with setting up a 3Com Office Connect router to work with Back to My Mac?
Do I need to check / Can I check if my Time Capsule has been registered with the Mobile Me servers?
Do I need to enable any specific ports on my 3Com Office Connect router?
Basic settings:
Time Capsule: green light - all OK
AirPort Utility>Internet: Connection Sharing: Off (Bridge Mode)
AirPort Utility>Advanced>Mobile me: account set up
AirPort Utility>Advanced>IPv6: IPv6 mode = Node, at the request of Apple Mobile Me support
System Preferences>Mobile Me>BackToMy Mac: On (green light).
3Com Office Connect Router: DCHP server: On
3Com Office Connect Router: Firewall level: High (default)
3Com Office Connect Router: Disable NAT: Off (default)
3Com Office Connect Router: Enable Universal Plug & Play: On
3Com Office Connect Router: Enable IPSEC-NAT pass through: ON, at the request of Apple Mobile me support
Com Office Connect Router: DMZ: enable 1-to-1 NAT: Off (default)
Any ideas?
Thanks.

Quick update on troubleshooting BTTM (or rather Back To My Time Capsule)...
Surprising;y, no 3Com products listed in http://support.apple.com/kb/TS1304. 3Com tech support stated that no OfficeConnect products have been qualified against BTTM and my specific router does not support IPv6 over IPv4 encapsulation.
MobileMe support were not able to help, citing the fact that I had an unsupported router.
I have made no change to my modem/router config since first posted but since an upgrade of my TC to 7.4.2 I have been able to use BTTM with my TC (bridge mode) and my OfficeConnect modem/router (802.11b WiFi disabled).
I have made limited testing from other remote locations from my MBP and also proved that it worked over a 3G/UMTS connection on the UK's 02 network also
MobileMe still reporting uPnP / NAT problem on my MBP when working remotely though.
http://discussions.apple.com/message.jspa?messageID=9733258 confirms that this has been solved and, apart from the anomalous Mobileme status message, I can agree.
Good news so now do not need to swap out my 3Com router. Also shows that this 3Com product does meet BTTM connectivity requirements.
Message was edited by: Elise49
Message was edited by: Elise49

How to list the abap programs order by updated date in ECD

Hi experts,
how to list the abap programs order by updated date in ECD?
thanks.

I wrote a custom program for displaying Z* development work into an ALV report. 2500 character limit prevents me from posting, message me your email and I'll send you source code.
Edited by: Brad Gorlicki on Feb 18, 2010 11:25 PM

Is RTMT can monitor when the first Route Group of a Route List is not used ?

Hi everyone,
I want to find how monitor this event in RTMT without success. I hope someone will have an idea to suggest !
My problem :
I have one Route List (RL_Remote) wich is used to route calls between two sites. This Route List has two Route Group :
- the first is a SIP trunk connected to my remote site (RG_SIP)
- the second is a local route group wich used PSTN (RG_PSTN) [BACKUP]
Is it possible that RTMT sends me an alarm when calls are routing via RL_Remote but are not using RG_SIP ?
In fact, I want to receive an alarm as soon as the Backup Route Group (RG_PSTN in my example) is used.
Thanks for your help !
Have a nice day,
Franck-Emanuel

More or less correct yes:
Core Issue
This issue can occur if an available route is not found in the indicated route list.
If the call fails on the current gateway, Cisco CallManager attempts to extend the call to the next route in the route list. This occurs until it reaches the last route. If the call cannot be completed with the last gateway, the Route List Exhausted event is logged.
These are possible reasons for a failure on the current gateway:
Unallocated number, such as a non-existing destination
Busy user
Out of bandwidth
Gateway fails to respond to the call setup request
The user receives alerts similar to this in the Real-Time Monitoring Tool (RTMT):
Most Recent Alert Raised: At 09:19:27 on 12/21/2005 on cluster CALLMANAGER1-Cluster. Number of RouteListExhausted events exceed 0 within 60 minutes.
There are at least five RouteListExhausted events (up to 30) received during the monitoring interval from 09:07:27, 12/21/2005 to 10:07:27, 12/21/2005.
https://supportforums.cisco.com/docs/DOC-29032

T1/E1 redundancy in Route List

Hi All:
Can some one please help me to resolve the issue?
I have 2 route groups in a route list for a Dial pattern, but for testing purpose when I shut down one controller , it DOES NOT go automatically to 2nd route group.
RL_Toronto
--à RG-Tor ----T1 with 24 channel in NM-HDV
à RG-Ottawa -----T1 with 24 channel in NM-HDV
9.[2-9]XXXXXX -- RL_Toronto
I tested each route group individually, it is working perfectly, however when I give it as redundant and shut down one of the controller ( eg: When RG_Tor –T1 down, it should go to RG_Ottawa T1) but it is not taking the redundant T1 for backup.
Any suggestion would be much appreciated

Well, are these gateways MGCP or H.323? Sounds like they may be H.323. If
so, you have some options. There is a Call Manager service parameter you
could look into: "Stop Routing on User Busy" and "Stop routing on
unallocated number". They are set to true by default, you can set them to
false and force the CUCM to hunt through the route list.
You could also opt to leverage the following gateway configuration instead
of modifying the service parameters. I prefer the gateway config myself:
no dial-peer outbound status-check pots
HTH.
Regards,
Bill
Please remember to rate helpful posts.

How Route List work?

Similar Messages

Maybe you are looking for