How should I specify the JSESSIONID in URL?

Hi, friends.
I've got a client wich I use instead of browser.
Could you please prompt me how should I specify JSESSIONID in url, when connecting to server to use previously created session if I already know the ID?
I tried [my_url]?JSESSIONID=[ID] but in servlet when I call req.getRequestedSessionId() is returns null.

Use a semi-colon
[my_url];JSESSIONID=[ID]?param1=xxx etc ...

Similar Messages

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How can I specify the PARTITION name at the time of data load?

Hi,
I have a table with 4 partitions. By using SQL*Loader I'm going to load data into the same. While inserting the records it should go to the 2nd partition only.
Where should i specify the Partition name?
Please clarify me with sample code.
Thanks.

Assuming that the partition is empty before the load, I would load the data into a temp table with the same structure as the partitioned table. After all the data is successfully loaded, exchange the partition of the table with the temp table using 'alter table ... exchange partition...'
Another question is, how is your table partitioned?
Message was edited by:
Jens Petersen

How can I specify the path in Form Builder 9.0

Hi, everyone,
could anybody tell me how can I specify the path in Form Buidler 9.0? there is problems when I want to attach library in form builder. thanks to Kuldeep RAwat and Natalia Vidal, I know I should specify the path, but I still don't know how to specify, how can I do?
besides, when I run a form, sometime there will be a warnig:
Please acknowledge message
what's that meaning?
thank you very much for your great help

Shay Shmeltzer thank you very much for your so quickly response. I have modified the file and my form can run now!
but, when I open my form, it always suggest me:
FRM-10102: Cannot attach PL/SQL library TalbotStandard. This library attachment will be lost if the module is saved.
so everytime I open my form, I must attach the library manully. I don't know the reason. do you know that or anybody else knows that? thank you very much!
have a good weekend :-)

How can we specify the number of decimals to be printed

How can we specify the number of decimals to be printed
such as "%5.2d" in C.
Can anyone help me

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

HT1277 how do i specify the default mail account

how do i specify the default mail account if i have more than one accounts?
Not to worry i have found the setting, thanks
Message was edited by: Teli Proto

hmmm.. I've been complaining about this to the engineers for over a year. The storage location should be chooseable as should there also be a backup feature (as in Addressbook and iCal).
for those that want to change this... it would be cool for someone to write a non cryptic, complete 1,2,3 stepped procedure.
That is.. exactly what do you change to what in the mail user preference file? And what do you use to change it.. text edit? "[ ]" heretofor = folder
I would like to change my Mail storage location to the my [Documents] . Using Text Edit, I went into my user [Library], to [Preferences] and opened the com.apple.mail.plist and changed all the ~/Library/mail storage locations to ~/Documents/Mail
lastly I moved the [Mail] that was in the [Library] to my [Documents].
Didn't work. Restarting Mail got me into the guided set a new account (and as far as I can see there IS no way of not taking the guided set up as alledged above). There must be something, some built-in direction other than in the [Preferences] defaulting mail to be saved in the [Library] folder
If someone has done this and been successful.. a 1,2,3.. list would be apprecaited... and please don't leave any details out. Thanks
dual core Intel G5 Mac OS X (10.4.5) Pismo powerbook specialist

How do I specify the JRE i wish to use to Run an Application.

Hi Everyone;
Please bear with me if you read this before.
I have installed java 1.3.1 and java 1.4.1 in that order.
The JRE used by default is java 1.4.1
How do I specify the JRE I wish to use to Run an Application from a command prompt.
Example:
Java -something org.jboss.Main
help ??
Stephen

I was a lil embarrassed. I told my supervisor that the installation of java overwrites the JRE and that's that.
My supervisor took 10 minutes and went through it and found java.exe in the System32 file.
The java.exe file is found in guess where "C:/WINNT/System32/" folder how nice. C:/WINNT/System32/ is in the path. Not only that it's the first entry in the path. So when I execute java it is not using java.exe any one of the java files that I got from the java website.
So I don't have any control over the version.
Oh well;
That's life. That's 1 for my supervisor.
Stephen

How should we get the out put file-name same as in put file-name in file to

Hi frnds,
having hundreds of files in the sender system with different names, how should we get the out put file-name in the receiver system same as the in put file-name in file to file scenario ?
Thanks in advance.
truly,
snrvakiti.

Hi,
In Receiver File Adapter you can set under 'Adapter-Specific Message Properties'
check Use Adapter-Specific Message Properties
check Fail on Missing Adapter Message Properties
Check File Name
Have a look at this link, [File_to_File|http://allsapnetweavernotes.blogspot.com/2008/09/how-can-i-access-filename-from-fileftp.html]
Regards,
P.Rajesh

How do i specify the port form where i want to send the mails

i have smtp server which by default has proxy at port 25.So i want to send the mails through some other port.So how can i specify the exact port in the bean(i am using a bean to send email) so that all the mails through that port.my machine is having public ip.so what i do is Properties prop = new Properties();
prop.put("mail.smtp.host",hostname);but how do i specify the port name coz this sends the mail at port 25 by default.

prop.put("mail.smtp.port",portnumber)

How should I set the iMac display in normal mode

how should I set the iMac display in normal mode

Not certain if this is what you're asking, but the normal setup would be System Preferences>Displays>Disply tab and select 'Best for display'.

To create apple US account i followed all the steps including none in the payment option. i dont have US address how should i fill the fields.

to create apple US account i followed all the steps including none in the payment option. i dont have US address how should i fill the fields.

You need to be in a country to use its store - if you are not in the US with a US billing address then you cannot use the US store.
From the US store's terms of use :
The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.

How should I understand the parameters/argument values in the {} and [] right after a function?

Hi,
How should I understand the parameters/argument values in the {} and [] right after a function?
For instance the {[Name="control"]}[Content] part in the
control=Excel.CurrentWorkbook(){[Name="control"]}[Content]
and also the [Control]{0} part in the periodctrl=control[Control]{0}.
Thanks.
Regards,

The "[]" operator in M is like the "." operator in C-like languages, if that helps. It takes an aggregate value with named components and it selects one of those components. In the case of the record "Foo", "Foo[Bar]"
returns the field named Bar. In the case of the table "Baz", "Baz[Quux]" returns the column named Quux.
Similarly, the "{}" operator in M does subscripting of lists -- like the "[]" operator in C-like languages. If "Foo" is a list, then "Foo{0}" returns the first element of the list, "Foo{1}" returns the second
element of the list, and so on.
In the case of tables, it's also possible to use "{}" with a record argument, in which case it will return the row which matches the record criteria -- provided there is exactly one. So if "Foo" is a table, then "Foo{[Bar = 1]}"
will return the row for which the Bar column has a value of 1.
Many of the data access functions in Power Query return what we call "navigation tables". Sql.Database, for instance, returns a table with columns named Name, Schema, Object, Kind and Data. Each table in the database has a single entry in this
navigation table. When we index into the table with "table{[Schema="dbo", Object="table"]}", we're selecting the single row that matches those criteria. This gives us a record. We then want to pick the "Data" field of
that record, which contains the actual table data. That's why there's typically a "[Data]" at the end of expressions which fetch data from the SQL table.

How can I specify the attribute AU_SIZE in OUI

Hello,
How can I specify the AU_SIZE when i create the disk group for OCR and Voting disk when i install the GI home.
Basically i want to create the Disk group with AU_SIZE as 4MB when i create it Via OUI.I know I can edit the attributes when i do using ASMCA.But not sure about OUI.
Please can someone guide me ?
Regards
Joe

Hi Joe,
Did you mean that i will need to move the OCR/voting **** to another diskgroup -> drop the one created during installtion -> recrerate the diskgroup with AU_SIZE as desired Yes.. you must move OCR, VOTING and ASM SPFILE to another diskgroup and recreate the diskgroup.
Doc said : Oracle recommends that the allocation unit (AU) size for a disk group be set to 4 megabytes (MB).
I do not see benefits to configure the AU SIZE 4MBytes for diskgroup that will store only Clusterware Files.
The voting files are stored directly on ASM Disk (i.e not use AU SIZE). The OCR File and ASM SPFILE use AU SIZE, but are not frequently accessed (low I/O) and files are too small to configure AU to 4MBytes.
Set AU SIZE makes a difference when you do need high I/O throughput. i.e: Used to Diskgroup that will store Datafiles.
I recommend you read my point of view how to store VOTING Files, OCR and ASM SPFILE on ASM.
Re: 3rd voting disk on nfs share
Regards,
Levi Pereira

How should I change the following SELECT QUERY?

Requirement:
There are checks in the program for material group 2, z93 AND z94 which should be skipped if the sales org = 'JP40'.
sales organisation is taken from the layout(SE51) dictionary fields (MODULE POOL PROGRAM)
The select query is:
select single matnr
                  into t_mvke-matnr "dummy
                  from mvke
                  where matnr = t_9000-matnr
                    and vkorg = vbak-vkorg
                    and vtweg = vbak-vtweg
                    and mvgr2 in (c_z93,c_z94).
How should I skip the material group c_z93, c_z94 only for JP40(vbak-vkorg) sales organisation, except JP40 material group should be there for other sales org. but for JP40 material group should be skipped.
What would be the select query or should I give any kind of IF conditions before select query.
Please help me out.

Hi Rani K
You can try like
IF VBAK-VKORG = 'JP40'.
select single matnr
into t_mvke-matnr "dummy
from mvke
where matnr = t_9000-matnr
and vkorg = vbak-vkorg
and vtweg = vbak-vtweg.
ELSE.
select single matnr
into t_mvke-matnr "dummy
from mvke
where matnr = t_9000-matnr
and vkorg = vbak-vkorg
and vtweg = vbak-vtweg
and mvgr2 in (c_z93,c_z94).
ENDIF.
Thanks
Gaurav

How should I specify the JSESSIONID in URL?

Similar Messages

Maybe you are looking for