How the consumption valuse gets updated in the table MVER

Hi,
Can anyone explain me how the consumption value gets updated in the table?
Would you please be able to confirm that all movement types are considered for updates in table MVER. If not, i would need the movement types that are considered as pertaining to u2018consumptionu2019.
Thanks
Srini

Hi,
Consumption both in material master view and table MVER are updated as soon as the movement is made, ie, real time data.
To see the movements relevant to consumption, use OMJJ to review movement types or table T156. In this table, select Consumpt.postg. field not equal to blank (so blank is excluded).
This should then show all movement types subject to consumption posting. The likely ones to see are below, with majority being G.
(blank)     No consumption update
G     Planned withdrawal (total consumption)
R     Planned, if ref. to reservation, otherwise unplanned
U     Unplanned withdrawal (unplanned consumption)
Thanks.

Similar Messages

  • Consumption values get updated in the table MVER

    Hi,
    Can anyone explain me how the consumption values get updated in the table MVER?
    If you have any doucments,it will be better......
    Thanks
    Srini

    hi,
    When ever you do the GR for the consumption postings, the material gets updated in the respective table...
    You can see the table in SE16 tcode...
    There is ABAP coding linkages, in which all the fields are stored in the forms of tables in the std sap system...
    Hope it helps...
    Regards
    Priyanka.P
    I request you to close the threads once you get the satisfied answers...

  • How the tables are  linked to each other in ERP and CRM?

    Dear All,
    Can anyone provide the info for the below query ?
    "How the tables are  linked to each other in ERP and CRM"
    Quick response is highly appreciated.
    Best Regards
    Succhi

    Dear Buijink      ,
    Thanks for the info.
    Here in this table SMOFTABLES , it is  giving the CRM adopter objects with R/3 tables . But my requirement is  more on corresponding CRM Tables , the data fetching from R/3 tables will store in which CRM tables.To be clear the adopter objects extract the data from different R/3 tables but stores in to which tables?
    Thanks in advance
    Best Regards
    Succhi

  • Field TSABR is not getting updated in MHIS table.

    Hi All,
    The field TSABR (Scheduling Status: New Start Called) is not getting updated in MHIS table.
    Please do tell me how it will get updated.
    What is a logic behind it.
    Many Thanks in advance.
    Regards,
    Sanjay Tiwari

    Hi,
    I checked it my system and that field was getting updated ..
    For calls with status "New start called " will get updated in MHIS and for these call you will  only have the field scheduling status :planned date called " as marked . pls check
    regrds
    pushpa

  • Data is not getting updated in DB table

    hi all
    i am doing IDOC to jdbc scenario
    i am triggering idoc from R/3 and the data is going into DB table
    sender side:       ZVendorIdoc
    receiver side:
    DT_testVendor
      Table
        tblVendor
          action       UPDATE_INSERT
          access      1:unbounded
            cVendorName 1
            cVendorCode 1
         fromdate    1
         todate      1
          Key
            cVendorName  1
    if i trigger idoc for example vendor 2005,2006 and 2010 data is getting updated in the table
    but again if i trigger idoc for same vendor nos data does not get updated in DB table while message is successfull in moni and RWB both
    plz suggest if any change need to be done to update the data
    Regards
    sandeep sharma

    Hi Ravi
    you are right, vendor no is my key field . problem is when i send data again then it should Update the data but it's not updating the data again
    i did on exp with this : i deleted all the record from the table and then  triggered idoc for vendor 2005 , 2006,2010 after this data is updated in the table i deleted the rows for vendor no 2006 and 2010 and kept the row for vendor 2005
    then i again trigered the idoc for vendor no 2005,2006 and 2010 now this should update and it should insert rows for vendor no 2006 and 2010 but i am surprised its not updating the data
    Thanks
    sandeep

  • How do I stop getting updates for games through the app store on my macbook?

    I'm continually getting updates for games (also for the usual stuff, but that's fine), is there a way to edit what updates you get? 
    Thanks!

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • HT1206 How do I stop getting updates for my husbands Itunes account?

    I no longer want to get updates for my husbands Itunes acounnt. How do  I stop getting his updates?

    Deauthorize All, then authorize the active computers.

  • How does ISM02 Field get updated in tcode COR6

    Hi,
    I have a problem where the Field ISM02 is getting updated only for the first partial confirmation and from the next time it is updating 0 in the filed When we run the tcode COR6.
    can any one help me know the functionality or conditions for the field ISM02 to get updated in the table AFRU.
    This problem is happening only when we try to confirm for the Work centers which are not assigned to the production order..

    Hi,
    The example field does not get populated and won't be for two reasons:
    - The Xpmd products don't do it and we want to keep the same XML schema than the others so that FlexPMD reports remain compatible with third party tools (like the PMD Hudson plugin, and XSL script)
    - That would have a high impact on the report size. Imagine that you have 2000+ violations in your report...
    That being said, it will be possible to retrieve the example section from the Flash Builder plugin in the outline view.
    Best regards,
    Xavier

  • How the tables got analyzed?

    new to the work. and have not done the dba work for a few years.
    a couple weeks ago got a cloned production's db to work on in the dev server. the db is 11.2.0.3.
    I found some of the tables got analyzed on 2/15 after the cloned made, which shown as the LAST_ANALYZED in the view DBA_TABLES. But Found no related jobs in dba_jobs.
    how could ?

    Maybe autotask, look for it at dba_scheduler.
    HTH
    Antonio NAVARRO

  • Mat doc not getting updated in AFRU table

    Hi All,
      While doing the confirmation cancellation for the rework order the referance material document is not getting updated in the AFRU table.
      The referance operation set is used for the rework production order and there are no component assigned ,the components to be issued are  entered at the time of confirmation.
    The material document is getting updated in case of confirmation in AFRU table but the same is not getting updated in WABLNR field in case of cancellation of confirmation.
    When I checked MSEG all the material documents are observed with referance to the order number but the same are not displayed in AUFM and AFRU table.
    This behaviour is not obeserved in case of normal production orders. what can be the reason behind the same?
    Regards
    Ankush

    Dear Ankush
    please see FAQ note 540392 question 11.
    11.        Question:
    Despite successful goods movements, the material document is not
    updated in field AFRU-WABLNR. Where do I find the document number?
    Answer:
    As of Release 3.1H, the system provides the reference from
    confirmation to material document via table AFWI. The system still
    only uses AFRU-WABLNR in the case of header confirmations or
    confirmations for an individual operation. With milestone
    confirmations or with separate goods movements, in other words goods
    movements that are posted in the update program or via requests
    (BAPIs, collective entry, mass processing, BDC/PDC), table AFWI is
    always supplied due to technical reasons.
    BR Sabine

  • Not getting updating in a table....

    Hi friends,
    Currently i working on integration of apex with ebs R12.....And i have successfully integrated following the rod west document....
    I created one DB application in my sample schema that is associated with apex 4.0.....
    Application details:
    *) login page(where i will be giving username and password)
    *) page 1 (consist of several form fields, like
    --->name:
    --->module:
    --->projects:
    ----->email:
    the above are the fields, if i put any entries in the above field means, it will get automatically inserting in the report column, which is also in the same page consist of the above fields in the table manner...
    since this report table consist of an edit icon in front, if i clicked the edit icon of an one row means, it will go to another page..
    *) i.e. page 3(consist of the same fields with entries in it automatically corresponding to the each and every row, suppose if i want to update any changes means i can update in it....
    this is my application that i developed it is working well with in the sample schema apex 4.0..
    What i did is i created a new workspace with APPS schema in it...and i have imported my application that i developed in sample schema to APPS schema....
    Since after importing to APPS schema...when i tried to open the application, it is not showing any datas in it...That is due to the tables that are supporting the application is not in APPS schema, so what i did is i have given grant privilege to the respective tables and also i have created a synonym for accessing the table in APPS schema for supporting the application.....
    Now if i tried to put any entries in the form in page 2, it is getting inserting in the report column which is also in the page2....
    But my problem starts here, if i clicked the edit icon symbol in each and every row of the report column it is going to the page 3 which has a respective form fields, but it is not showing any entries in it automatically, and if i tried to put any entry in it, it is not getting updating in the report table......
    why this problem occurred for my application in APPS schema....But my application works very well within the sample schema......why it is not showing any entries in the form automatically soon after i clicked the edit icon in each and every row.....
    i couldn't know what is the real problem behind this..... help me friends,
    Thanks in Advance..
    Regards,
    Harry...

    Goodmorning,
    Have you had a look for notes, Depending on the release and industry sollution you can find several notes on this subject (start looking for message RW 022).
    Annemarie de Bruijn

  • How to do a mass UPDATE on a table that must be kept "online"

    Hello,
    I am using Oracle 10g and would like to know how best to update a very large table (20 million rows) globally (one column in all rows) in such a way as to make the UPDATE as fast as possible and avoiding contention on indices, row locks etc.
    The table has no Foreign Keys, No triggers. I have read about creating temporary tables, filling them, dropping the original and then renaming, but this does not seem reasonable considering that the table must be at all times online.
    I have also tried with a parallel hint but it was slow.
    Any insights greatly appreciated.

    Is this identical to the question you asked Strategy for a fast global UPDATE on a large online table?? Or is there some difference between the two that I'm missing?
    Justin

  • Contracts info is not getting updated in VEDA table

    Hello Firends,
    Please find below my issue in detail:
    I have created two contracts : one created first ( ex:1111) and then wrt to this I created another one (ex:1112),
    When I run the table VEDA , sytem is fetching all the info of the first contract but not the second one's info as shown below,
    contract 1111 has line items 00000,00010,00020,00030
    contract 1112 also has line items 00000,00010,00020,00030
    but when I run VEDA table , sytem is displaying as shown below :
    1111   00000
    1111   00010
    1111   00020
    1111   00030
    1112   00000
    Please provide your valuable inputs,
    Immediate action will be apprecaited,
    Thanks in advance.
    Thanks & Regards
    Suresh Kumar T

    Hello Siva,
    Thanks alot for your inputs but there were many contracts created long back and now I am trying to pull out those with VEDA table where I am unable to do it and also tried with newly created one where I am facing the same problem.
    Thanks & Regards
    Suresh Kumar T

  • Locally check how Endpoint Protection client gets updates

    Hi,
    I'm in the middle of a large deployment of SCEP (ahem) System Center 2012 Endpoint Protection, and I've come across an interesting question. Is it possible to determine the method the local SCEP client used to obtain it's most recent definitions update?
    The background here is that our clients are set to obtain updates from the SCCM server, and only from the Internet as a last resort after 12 hours of failure. However, during one recent deployment, the local team reported a spike in their Internet traffic
    and believe several hundred SCEP clients updated via the Internet. Is it possible to verify this locally from log files on the computer or some other method?
    This is an issue for some of our locations where Internet bandwidth is at a premium, but we have good internal WAN links.
    Kind regards,
    Matt

    Hi,
    We could configure Definition Update sources under Antimalware Policy.
    How to Configure Definition Updates for Endpoint Protection in Configuration Manager
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How often do we get updates?

    What has been the history of Apple putting out updates for the Iphone? How long before we could be expecting one again?

    Apple does not have a set schedule. 2.2 was released in November. 2.1 in September. 2.0 in July, with 2.0.1 and 2.0.2 in between July and September. That may give you an idea.

Maybe you are looking for