How to activate myself system

Hello:
I have a very basic question. We just installed our BW 3.5 and I am trying to learn how to create an infocube copy. I read that we need a data mart interface in the myself system to transfer data, but I can't find myself system on the source systems tree. Any help is appreciated.

Hi,
It is surprising to know that you donot have Self system as one of the source. Becasue system creates it automatically . So I hope, sombody might have deleted it. You better contact your Basis guy and ask him to create it. We can follow the same steps that we do in the creation of R/3 as source system .
With rgds,
Anil Kumar Sharma . P

Similar Messages

How to activate Retail system

Hello guys,
I need some urgent solution about how to activate EA-Retail extension set!!
I went to SPRO to activate. there it shows it is active... but in SPRO still plants are as Plant( which should change to Site)
also I can't run any Retail system tcode (Like MM41, MM42 etc.)
Please advise with the steps?
Thanks in Advance!

Hi Madhusudan,
Please refer Note 897714 - Activating Retail Short Text Replacement,this will solve your problem.
Reward points if helpful.
Regards,
Sam

How to Create Myself System?

Hi,
We are using BW 3.5 system and have an infosource that loads its data from itself. So we need to establish Myself Source System.
But in rsa1 trx, our source system is set as a Datamart, which is supposed to be "Myself System".
How do we change our source system from datamart to myself system? Or is there any way to create new myself system?
Kindly suggest.
Regards,
Chintan

hi CS,
A BW system can be used as a source system to supply data to the same system or to another BW system.
When it is used as a source system to supply data to itself it is known as myself source system. All the data sources are available in datamart application component.
MYSELF is a special source system and you do not have to create it. Choosing a BW type source system (Create Source system option) will allow you to connect another BW system as source.
When you create datasource based on current source system (for example XML datasource or export datasource) it automatically mentions MYSELF source system.
The name of myself source system is the logical system name that your client has been assigned (in SCC4).
for more details, search SDN
with hopes
ARS

How to activate the IS-Retail in ECC 6.0 R/3 system

Dear Guru's...........
Can any one tell me how to activate the IS-Retail in ECC 6.0 R/3 system.
I have IDES system in my home I donu2019t know how to activate retail settings.
Please suggest me how to do that.
Regards
dnr

Dear DNR,
SPRO --> IMG --> Activate SAP ECC Extensions (Or, T. Code: SFW5)
Go to Tab: Industry Business Function
Select Business Function Set: ISR_RETAIL - SAP Retail
A new line will be appeared below.
Current Status will be OFF. Click within Field: Current Status. It will pop-up a list. Select "X - ON".
Important: I've read somewhere - Once Activated, cannot Roll-back.
Best Regards,
Amit
Note: For more, go to - http://help.sap.com
Follow the menu tree: SAP for Industries/SAP for Retail
Click on the link for "SAP industry Specific Components"
Choose the document "Business Function Set Retail"
Also,
Check https://websmp103.sap-ag.de/erp-upgrade --> mySAP ERP 2005: Updated upgrade FAQs, there you will find the list of Industry solutions which are supported by mySAP ERP.
https://websmp103.sap-ag.de/~sapidb/011000358700006168472006/
You must this thread in to [Forum: SAP Enhancement Packages|/community [original link is broken]; OR [Forum: Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP); as Nowhere, it is related to SAP SD.

How to de-activate source system in BI system...?

How to de-activate source system in BI system...?
Regs,
Naren..

Hi,
I feel we cant de activate the source system. Either we can aceive to do any of the following method:
1. Delete the source system
2. Remove the RFC Destination.
3. Remove the authorization to load the data.
I dont know why you are asking to deactivate the system. Coz this will not cuase any problem to you for any testing in the landscape. One more thing if you will do any of the above three activity, then Basic guys only rollback the actual situation.
So please be confident before doing this task.
Regards,
Vivek V

I am having trouble installing photoshop Lightroom. I have the S/N #... I need it to be confirmed and activated so i can receive an email to activate the system to my computer. I am not sure how to go about doing so.

I am having trouble installing photoshop Lightroom. The program is installed and has some sections blocked off. I have the S/N #... I need it to be confirmed and activated so i can receive an email to activate the system to my computer. I am not sure how to go about doing so.

If you have a serial number, you simply need to enter it into the proper fields.
Since you don't say what version of Lightroom, and what sections are "blocked off", let me guess that you have Lightroom CC, and you need to enter the serial number to turn it into Lightroom 6. Here are the instructions: Adobe Photoshop Lightroom Help | Serialize Lightroom CC trial to activate as Lightroom 6
And if that's not the right assumption, then please give us the details.

How to activate netweaver in ECC 6.0 EHP6 system

Dear friends,
We are using EHP6 IDES server, in that i want to use net weaver , please let me confirm my points.
1) How to activate netweaver in ECC 6 with EHP6 server.
2)how to create link for that server access from browser .
3)How to activate webdynpro .
Please provide me step by step procedure for activating NetWeaver in EHP6 server

1 - You don't activate Netweaver in an ECC system. Netweaver is a technology platform and products are based on that.
2 - Configure Web GUI. Refer to this blog - http://scn.sap.com/docs/DOC-29485
3 - If your question is about activating Web Dynpro services then read this link
Activating Web Dynpro Services - Search - SAP Library
Regards
RB

How to activate HTTP port in R3 system?

Hi All
In SMICM transaction i am not getting Http port. I think its not activated.
Can anyone please tell me how to activate HTTP port in R3.
Please help me?
Regards
Sowmya

Hi,
You just have to set the profile parameters that are described in the documentation that you should have read.
Regards,
Olivier

MySelf system

We have done a copy of one of our BI systems. After the copy we changed logical system name, and ran BDLS to reflect this.
But..now the MySelf system still points towards the system we copied from! The technical name has changed, but when I try to activate it I get the logon screen from the old system!
How can I change this?
-AD

Hi,
So chang it to new IP address. I hope, then on wards the things work properly with new system.
With rgds,
Anil Kumar Sharma .P

How to Activate the Table which Doesn't Exist - Can I create Table in SE11

Hi Gurus,
I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of the SAP Component, I get the following error message ( usr\sap\trans\log ) :
Phase Import_Proper
>>>
SAPAIBIIP7.BID
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
<<<
Now, I checked Domain WRMA_KAPPL in SE11 and it diplays that it is partially active :
" The obeject is marked partially active for the following reasons :
   Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
   be adjusted to this change. To adjust the dependent objects, you must perform the following actions
   the next time you activate this object.
                    - SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
My question is - how to activate this SYNP Time Stamp.. ?
                      - Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
                        TCode..
Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
Thanks,
Regards,
- Ishan
>> Ok, Now I forcefully activated the Domain and then all the 5 Data Elements in SE11 ...now I have error
     that table WRMA_S_RESULT_DATA and WRMA_TT_UPDTAB_DSO Could not be activated...
     ..And in SE11 > Input the first / Second Table > Excute > Output : Table Does not Exist !!!
      - Now, How do I activate something which does not exist in the first place ?
    Any Input about this ?
Thanks,
Regards,
- Ishan
Edited by: ISHAN P on Jun 19, 2008 3:44 PM

Read note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
The error occurs in Release BI_CONT 703 Support Package 9.
If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
1. Use transaction RSA1 to call the Data Warehousing Workbench.
2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1. You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display". Proceed as follows if the InfoObject is still not active:
3. Go to BI Content activation.
4. Select "Object Types".
5. Open the "InfoObjects" tree and select "Objects".
6. Search for the InfoObject 0TCTLSTCHG and select it.
7. Transfer the object and activate it.
These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
Jacek Fornalczyk

How to activate the ATP buckets in APO?

Hi,
We are in the process of changing the ATP buckets in our APO system.
I know the Path in the configuration:
Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
On the left side you will get three sections:
Global Settings
ATP Buckets (Active)
ATP Buckets (Planned)
I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
Any ideas are highly appreciated.
Thanks,
Mahesh

Hi,
To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
The details are as beneath:
Use
If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
Features
The system activates the bucket parameters in the following situations:
Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
·        Creating the active planning version for a client using transaction /SAPAPO/MVM
If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
·        Initializing SAP liveCache for all clients using transaction LC10
In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
·        Executing the report /SAPAPO/OM_ATP_REBUILD_TS
The system only rebuilds the ATP time series here.
In this case, the SAP liveCache administrator must execute the following steps:
                            a.      Shut down SAP liveCache.
                            b.      Replace the com-file registration:
                                                  i.       At command line level, go to the SAP subdirectory of the SAP liveCache installation.
                                                ii.       Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
                                               iii.       Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
                                               iv.       Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
                            c.      Launch SAP liveCache.
                            d.      Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
                            e.      Shut down SAP liveCache.
                              f.      Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
                            g.      Launch SAP liveCache.
Regards
Vinod

How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!

How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!

Whilst I appreciate your responding - I do not think this helps with what I was enquiring (at least not without further explanations anyways).
I am aware of, and do use, the function - System Preferences > Keyboard > Text - for various replacements like (tm), (c), etc .... and also for fractions like 1/2, 1/4, 1/3.
However, my question was in relation to SUPERSCRIPTS for dates / numbers - namely, superscripting numerical suffixes for things like 1st, 2nd, 3rd, 4th,
So - please help - HOW do I set this up ? If indeed it is possible without System Preferences > Keyboard > Text ???

Acrobat 9 Pro Extended: How to activate logfiles?

Dear members
Does someone now how to activate or read out logfiles of a 3DPDF conversion?
I would like to convert Catia V5 data via command line, but cannot find or activate logs...
Currently I'm only using the OLE objects "AcroExch.AVDoc" and "AcroExch.App". In the API reference at livedocs.adobe.com there is nothing about it.
Thanks in advance for your help.
Regards
hanseat82

That's clear, we are calling the Acrobat over OLE via Perl, scrap:
use Win32::OLE;
$infile = $ARGV[0];
$outfile = $ARGV[1];
$NOSAVE = -1;
$PDSAVEFULL = 1;
## Create Objects
$avdoc_obj = Win32::OLE->new('AcroExch.AVDoc') || die "new: $!";
$app_obj = Win32::OLE->new('AcroExch.App') || die "new: $!";
## Open Inputfile
$avdoc_obj->Open($infile, $infile);
## Get PDF Document as Object from Inputfile
$pddoc_obj = $avdoc_obj->GetPDDoc();
And I found the Java code from you, Adobe:
#            catch (ConversionException e)
#                System.out.println(e.getErrorCode());
#                System.out.println(e.getConversionLog());
Can you give me name me the import module of class "ConversionException" or in general how to go on with that?
Thanks and regards
hanseat

How to activate video calling from account page?

On a new computer Windows 8.1 can sign into my Skype for Desktop Account using skype name and password. Also have same email address as before. Account page comes up but dont know how to activate Skype so I can video call. Tried to instal Skype & got as far as Save Skype to File box, clicked on this, then was expecting to see Run Installer but nothing happened. Was previously using Windows XP. Have the original Skype download filed. Plus several more where I have been attempting to resolve this problem. Am all ´skyped up´ but cannot use it !!
Absolutely desperate have been trying to remedy this for ages. can anyone help please. Thanks Deborah
Solved!
Go to Solution.

Well, if it hasn't successfully installed yet, then you won't be able to uninstall it. So with that in mind, if you are able to uninstall it then that would explain why you can't install it again. The program won't let you install it if it's already been installed. So if you'd like to try again you can uninstall it and reinstall from one of the files you downloaded.
So, the first step would be to see if it is currently installed. To do this, right click the Start button in the bottom right corner while in Windows desktop. You will see a context menu pop up. From there, choose Control Panel, and within Control Panel choose Uninstall a program. You will see a list of currently installed programs.
If you see Skype in the list, uninstall it. If you don't, then don't worry about it - it's not installed. Now try to install it again.
With regard to User Account Control, don't worry about that at all. It is safe to click Yes, and once you do that should initiate the installation process. User Account Control (UAC) is a warning that something want approval from a computer administrator, which gives it access to parts of the computer it would not have otherwise. You probably don't want to give administrator access to programs you do not trust, but Skype is made by Microsoft so there is nothing to worry about.
Let me know if this helps you, or if you have any more questions. Good luck!
P.S. You said the Skype installation file came from your XP computer - that may be a problem in itself. When you download Skype from the website there is a pretty good chance that it checks the version of your operating system before downloading, meaning that if you downloaded it on a Windows XP computer you may have downloaded a Windows XP version that will not work on Windows 8.1. So, if you are using a file you downloaded from that computer, just download it again from the new one. You can use the link I put in the first post.

How to activate planning version

hi,
sap gurus,
in which t.code we will create planing version for product allocation.
please explain how to activate planning version in product allocation. when we go T.CODE MC93
there the planning version 'A00' showing active instead of '000' which works as a updation when ever requried.
regards

Dear,
A00 is active version
What we need to do is create inactive version say 001 or 010 anything and forcast sales plan or production plan
Creat sales plan in MC87 and then goto MC88 make this inactive plan to active plan which system automatically takes to A00
Logistics u2192 Production u2192 SOP u2192 Planning u2192 Version Managementu2192 MC78 Copy
So here in the Source Version Provide the SOP version that you have created,
In the Target Version give Version A00
Hope clear to you.
Regards,
R.Brahmankar

How to activate myself system

Similar Messages

Maybe you are looking for