How to add catalyst-old on an up-to-date Arch using xf86-video-ati?

This is my main problem right now and this don't seem simple at all ...
Could you explain me how to do that ?

Uninstall the free driver, downgrade xorg, install catalyst from aur. See the Ati bar and grill thread for details.
Last edited by Mr.Elendig (2010-03-06 20:57:27)

Similar Messages

How to add a new custom paper size? I am using a HP Deskjet 1000 J 110a printer.

How to add a new custom paper size? I am using a HP Deskjet 1000 J 110a printer. I am using Windows XP home edition. The Custom option itself is not appearing in the process of selecting paper sizes in Printing preferences. I have installed this printer just today, but I bought it eight months back in Dubai. Could there be chance that since I purchased it in Dubai and I am using it in India, the software's not functioning properly.
Can you please help me with this problem immediately? Reply soon...

Hi RajeshPujara,
Please refer the link below to know the paper size supported by this printer.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02231304&tmp_task=prodinfoCategory&cc=us&dlc=en...
May I know the size of paper you are trying to print.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

[SOLVED]Swapping from xf86-video-ati driver to catalyst

Hey everyone,
So as the title implies, I need some help on this. I tried doing a pacman -R xf86-video-ati, then setting my xorg over to vesa as the driver prior to installing the catalyst driver. That part went fine. Installed catalyst which updated my xorg accordingly. Rebooted, and X won't load. So per ATI's instructions, I removed the catalyst driver, reloaded, did a new xorg - configure and worked my way back to xf86-video-ati.
I would really like to get catalyst going. Where did I screw up on my first attempt? I saw somewhere on the forum that you can actually get 3d working with the xf86 driver, but I forgot to bookmark that thread lol. Here's a copy of my current xorg if it helps at all.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "extmod"
Load "FGL.renamed.libglx"
Load "dbe"
Load "FGL.renamed.libdri"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 380 300 # mm
Identifier "Monitor0"
VendorName "SPT"
ModelName "X9WG-NagaV"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "760G [Radeon 3000]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by dissentiate (2009-12-27 05:41:59)

dissentiate wrote:Is there something in particular about 1.7 version that might work for me?
It's not Xorg that is the issue. It's the Catalyst drivers, they only support up to Xorg 1.6.
So you will have to downgrade Xorg in order to use them.
I'm using the xf86-video-ati drivers myself on Xorg 1.7 with a HD4850, 2D works fine. Xv and especially 3D is a no-go so far, but my system has been running for just a day now, so i'm still setting up lots of things.
In the new kernel (2.6.32) there is KMS support for the Radeon HD3xxx and HD4xxx series. I'm hoping that will get the drm module working (fails to initialize over here), and i'm hoping that will bring me at least Xv support, so I can watch videos properly. The open-source ati driver does support it.
So if you can wait for that kernel to move from testing to core, that's what I would do before jumping into the Xorg 1.6 and Catalyst "jungle".
[Edit]
I got Xv working by disabling KMS tries by the kernel, using "nomodeset" in my kernel boot line.
OpenGL attempts (even glxgears) crashes
Last edited by Ultraman (2009-12-24 01:35:23)

How to add a certificate to IIS global "Server Certificates" list using PowerShell?

Hi, been surfing the web for an example on how to add a certificate to the "global" IIS "Server Certificates" list using PowerShell but to no luck. I already have code in place on how to tie / associate a specific website with a specific cert but not how
to add the new .cer file using the "Complete Certificate Request..." wizard using PowerShell.... I dont expect the final code to become published but if someone had an idea on howto integrate / get an entry point on where to interact between the "Server Certificate"
list in IIS and POSH I would be super happy! :|
I am runnign IIS on a Windows 2008R2 x64 Standard Edition if that helps..... of course, I would saddle for an CLI if there is no other way, but POSH is of course the way to go! :)
Thanks for the help in advance guys, take care!
br4tt3

Hi and thanks for the suggestions!
Although it comes close, the suggested code example points on howto import / incorporate .pfx files - I am getting fed by .cer files which I need to add into the IIS console using POSH.
I tried explore the IIS.CertObj object but was not able to work out if this one could be used for importing / adding .cer files into IIS! However, launching the following command from a POSH console with Import-Module Webadministration already
loaded into that shell;
$certMgr = New-Object -ComObject IIS.CertObj returns the following error message:
New-Object : Cannot load COM type IIS.CertObj
From an IIS perspective I have the following components installed;
[X] Web Server (IIS)                                    Web-Server
    [X] Web Server                                      Web-WebServer
        [ ] Common HTTP Features                        Web-Common-Http
            [ ] Static Content                          Web-Static-Content
            [ ] Default Document                        Web-Default-Doc
            [ ] Directory Browsing                      Web-Dir-Browsing
            [ ] HTTP Errors                             Web-Http-Errors
            [ ] HTTP Redirection                        Web-Http-Redirect
            [ ] WebDAV Publishing                       Web-DAV-Publishing
        [X] Application Development                     Web-App-Dev
            [ ] ASP.NET
Web-Asp-Net
            [X] .NET Extensibility                      Web-Net-Ext
            [ ] ASP
Web-ASP
            [ ] CGI
Web-CGI
            [ ] ISAPI Extensions                        Web-ISAPI-Ext
            [ ] ISAPI Filters                           Web-ISAPI-Filter
            [ ] Server Side Includes                    Web-Includes
        [ ] Health and Diagnostics                      Web-Health
            [ ] HTTP Logging                            Web-Http-Logging
            [ ] Logging Tools                           Web-Log-Libraries
            [ ] Request Monitor                         Web-Request-Monitor
            [ ] Tracing
Web-Http-Tracing
            [ ] Custom Logging                          Web-Custom-Logging
            [ ] ODBC Logging                            Web-ODBC-Logging
        [X] Security
Web-Security
            [ ] Basic Authentication                    Web-Basic-Auth
            [ ] Windows Authentication                  Web-Windows-Auth
            [ ] Digest Authentication                   Web-Digest-Auth
            [ ] Client Certificate Mapping Authentic... Web-Client-Auth
            [ ] IIS Client Certificate Mapping Authe... Web-Cert-Auth
            [ ] URL Authorization                       Web-Url-Auth
            [X] Request Filtering                       Web-Filtering
            [ ] IP and Domain Restrictions              Web-IP-Security
        [ ] Performance                                 Web-Performance
            [ ] Static Content Compression              Web-Stat-Compression
            [ ] Dynamic Content Compression             Web-Dyn-Compression
    [X] Management Tools                                Web-Mgmt-Tools
        [X] IIS Management Console                      Web-Mgmt-Console
        [X] IIS Management Scripts and Tools            Web-Scripting-Tools
        [ ] Management Service                          Web-Mgmt-Service
        [ ] IIS 6 Management Compatibility              Web-Mgmt-Compat
            [ ] IIS 6 Metabase Compatibility            Web-Metabase
            [ ] IIS 6 WMI Compatibility                 Web-WMI
            [ ] IIS 6 Scripting Tools                   Web-Lgcy-Scripting
            [ ] IIS 6 Management Console                Web-Lgcy-Mgmt-Console
    [X] FTP Server                                      Web-Ftp-Server
        [X] FTP Service                                 Web-Ftp-Service
        [X] FTP Extensibility                           Web-Ftp-Ext
    [ ] IIS Hostable Web Core                           Web-WHC
More or less the one thing that I am trying to get up and running is an automated FTPS solution - I just use the IIS console to be able to troubleshoot / compare how things scripted from POSH interacts in the MMC representation. The error I am getting
might be that I am lacking some IIS components to be in place to be able to automate some parts of the IIS - as suggested by the IIS.CertObj object listed in the example..... I will get back if I can track down which component needs to be added to be
able to reference the IIS.CertObj object.
Br4tt3 signing out...
br4tt3

How to add a loader to an image gallery loading content using only actionscript

hi i am loading all thumbs and images in a container on a single frame using action script..but the size of the swf becomes 1.2 mb so i want to add a loader to it...the loader i am trying to add counts the frames but my file has just one frame so the loader doesnot show up..
here is the script of my gallery..and the timeline has just one frame...
import mx.transitions.Tween;
import mx.transitions.easing.*;
this.createEmptyMovieClip("container",1);
var imagesNumber:Number = 18;
var scrolling:Boolean = true;
for (i=1; i<=imagesNumber; i++) {
container.attachMovie("thumb"+i,"thumb"+i+"_mc",i);
myThumb_mc = container["thumb"+i+"_mc"];
if (i==1)
myThumb_mc._x = (0.0)*myThumb_mc._width;
else
myThumb_mc._x = ((1.2*i)-1.2)*myThumb_mc._width;
myThumb_mc._y = (Stage.height-myThumb_mc._height)/2;
myThumb_mc._alpha = 100;
myThumb_mc.largerImage = i;
myThumb_mc.onRollOver = function() {
this._alpha = 60;
myThumb_mc.onRollOut = function() {
this._alpha = 100;
myThumb_mc.onRelease = function() {
this._alpha=100;
for (i=1; i<=imagesNumber; i++) {
var myClip = container["thumb"+i+"_mc"];
myClip.enabled = false;
scrolling = false;
_root.attachMovie("image"+this.largerImage,"large_mc",2);
large_mc._x = (Stage.width-large_mc._width)/2;
large_mc._y = (Stage.height-large_mc._height)/2;
new Tween(large_mc, "_alpha", Strong.easeOut, 0, 100, 0.5, true);
new Tween(container,"_alpha",Strong.easeOut,100,50,0.5,true);
large_mc.onRelease = function() {
scrolling = true;
var myFadeOut = new Tween(large_mc, "_alpha", Strong.easeOut, 100, 0, 0.5, true);
new Tween(container,"_alpha",Strong.easeOut,50,100,0.5,true);
myFadeOut.onMotionFinished = function() {
for (i=1; i<=imagesNumber; i++) {
var myClip = container["thumb"+i+"_mc"];
myClip.enabled = true;
large_mc.removeMovieClip();
container.onEnterFrame = function() {
if (scrolling){
this._x += Math.cos((-_root._xmouse/Stage.width)*Math.PI)*20;
if (this._x>0) {
this._x = 0;
if (-this._x>(this._width-Stage.width)) {
this._x = -(this._width-Stage.width);
anyone knows how to add a loadre to this...?
thanks..

Check these links for tutorials on loading images
http://www.kirupa.com/developer/flashcs3/loading_image_as3_pg1.htm
http://tutorials.flashmymind.com/2009/02/loading-multiple-images/

How to add some days to the current system date

can anyone help how to add some days to the current date i.e if today is 3-12-2007 and if v add 15 more days then the output should be 18-12-2007

RajeshChandan wrote:
First of all thanks a lot ,and coming to the question i dont mean to change the sysdate instead i want to write a prg. where after entering the current date it should effect with the no.of days that i have given but not the system date .if u can answer please reply for thisAh, I see. In that case, you can use an instance of GregorianCalendar and use it's add(...) method to add days, months, years etc. to it.
http://java.sun.com/javase/6/docs/api/java/util/GregorianCalendar.html
Good luck.

How do I copy old Time Machine back-up data onto my new (second) back up drive?

I recently bought a second back-up drive for use with my MacBook Pro (running 10.9.4).
I'm successfully backing up my computer to both drives on a regular basis using Time Machine. (a Seagate drive and a Western Digital drive respectively)
I was wondering if there's an easy way to add the old back-up files from the old drive to the new drive as well. That is to say, I wish I had all the data that precedes my new back-up drive on BOTH drives. There's plenty of space on the new drive.
Again, I'm already running Time Machine successfully to both drives, is it perhaps as easy as connecting both drives to my computer and copying the older dated back-up files over to the newer drive within the Backups.backupdb folder for my profile?
Thanks for any help!

Although the documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
This technique will only work if the volume you're copying to is the same size, or larger than, the one you're copying from.
First, open the Time Machine preference pane and click the Options button. You may have to unlock the settings first by clicking the padlock icon in the lower left corner of the window. Authenticate as an administrator.
Delete the volume you're going to copy from the list of backup destinations. Then turn Time Machine OFF.
Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. All existing data on the destination volume will be erased.
If the volume you're copying was encrypted by Time Machine, you may have to unlock it first. Click the Unlock button in the toolbar of the Disk Utility window.
Turn Time Machine back ON and select the new volume as a backup destination. You can also continue to use the old volume, if you wish. The two will be alternated when both are available.
CAUTION: If the volume you're copying is corrupt, as shown by Repair Disk or Verify Disk in Disk Utility, then that corruption will be copied to the new drive. Don't copy data from a corrupt volume on a malfunctioning drive. Put the drive aside and don't use it until you're sure you'll no longer need the data. Then securely erase it and take it to a recycling center. Do the same if the Restore operation fails with "disk errors."

How to push a perticular request from PSA to Data target using DTP in BI

Hello all.
I have mulitple requests in PSA & wanted to move only perticular requests (Randomly, say first request & last request ) to data target using DTP in BI 7.0. How can we do this.. ? Is there any option in DTP (BI 7.0)for selective loading of requests from PSA to Data Target..
Thanks in advance..
Cheers,
sami.

Hi,
It is possible by using 'zero fetch' in DTP
If you want only the recent req to be loaded.
1. In PSA, change the status of the recent request to red
2. Do a zero fetch
that is processing mode - No data transfer; delta status in source: fetched
With this processing mode you execute a delta without transferring data.
3. change the particular request status back to green
4. Run a delta load
Regards,
Priya.D

Does anyone know how to add my old iphone to my newly set up iphone 4 cloud account?

I have an old I phone and would like to add all the info to my icloud account does anyone know how I can do this?

Welcome to the Apple Community.
Log into your iCloud account at settings > iCloud using the same account details and enable the services you want to use.

How to add an old time projector effect to a title

Hello, I want to add a date to a beginning of an old home movie film that looks like it was being projected through a projector. In other words would like to have scratches and the like show up in the date to go with the rest of the films old look. Wondering if someone could someone please point me in the right direction. I've also posted the question in the Motion Forum. thanks for the help

Here is a link for a free FCP plug-in for an aged film look. I've used it before with great results!
http://www.cgm-online.com/eiperle/cgmaged_film_lee.html

How do I delete old credit card info in order to use a new i tunes card?

How do I delete my old credit card number on my IPod touch in order to use a new I tune cards with money on it ?
Please help!

on itunes go to the store tab and payment information and edit it
click on none and apply
for there click on the itunes giftcards and redeem a card with a code on it to add the money to ur account

How to add text vertically into a Word margin with C# (using namespace: Microsoft.Office.Interop.Word)

I need to add text vertically in a word document outside the margins. How can I do this with Microsoft.Office.Interop.Word and C#?
Leonard Swarczinski Software Developer Postal Center International

Hi Leonard,
According to your description, do you want to add text vertically into Page Header/Footer? I wrote a sample for you.
using Microsoft.Office.Core;
using Microsoft.Office.Interop.Word;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace AddTextToWord
class Program
static void Main(string[] args)
CreateNewDocument();
Console.ReadLine();
private static void CreateNewDocument()
Object oMissing = System.Reflection.Missing.Value;
Microsoft.Office.Interop.Word.Application oWord;
Microsoft.Office.Interop.Word.Document oDoc;
oWord = new Microsoft.Office.Interop.Word.Application();
oWord.Visible = true;
oDoc = oWord.Documents.Add(ref oMissing, ref oMissing, ref oMissing, ref oMissing);
String HeaderText = "Hello everyone!";
WdParagraphAlignment wdAlign = WdParagraphAlignment.wdAlignParagraphCenter;
AddHeader1(oWord, HeaderText, wdAlign);
private static void AddHeader1(Application WordApp, string HeaderText, WdParagraphAlignment wdAlign)
Object oMissing = System.Reflection.Missing.Value;
WordApp.ActiveWindow.View.Type = WdViewType.wdOutlineView;
WordApp.ActiveWindow.View.SeekView = WdSeekView.wdSeekPrimaryHeader;
Microsoft.Office.Interop.Word.Shape textBox = WordApp.ActiveDocument.Shapes.AddTextbox(MsoTextOrientation.msoTextOrientationVertical, 150, 10, 40, 40);
textBox.TextFrame.TextRange.Text = HeaderText;
WordApp.ActiveWindow.View.SeekView = WdSeekView.wdSeekMainDocument;
If I misunderstood or anything wrong, please let me know and you can get more information from below articles.
Office development in Visual Studio
http://msdn.microsoft.com/en-us/office/hh133430.aspx
Abhout: AddTextbox Method
http://msdn.microsoft.com/en-us/library/office/aa171543(v=office.11).aspx
How to: Programmatically Insert Text into Word Documents
http://msdn.microsoft.com/en-us/library/vstudio/6b9478cs.aspx

How to add Sales Employee Details in Customer Master Data

Hello Gurus,
The requirement is that my client is in manufacturing and sales. And they have different sales person assigned (like territory manager and accounts support) for respective customers. My clients needs to have the name of the territory manager available somewhere in CMD so that the end user is aware about the sales support representative. How we can configure it? If yes, will we use LSMW or MASS to upload the data. Please suggest. And we dont have a HR module in Place, so do we use T COde VPE1 (or PAL1) and then asign it parnter function or is there someway else. Eg - My customer number is 1000, in the same master number, details of sales employee with the phone numbers and email address should appear.
Regards

Hey thank you Warren for your quick reply.
So If I am right, the only option to add sales employee is in partner function tab.
Moreover, will we use LSMW to add the data or T code MAss will work.
And we dont have HR module in place, so I guess we will not be able to use. T- code Like PAL1

How to add primary key for table with existing data?

The table is occupied data already. There was no primary key before, so for every column, there are some duplicate values.
I want to add a new column, which should be of the datatype integer, and can automatically increment, starting from 001. I tried this in Oracle SQL Developer, but it says "ORA-01758: table must be empty to add mandatory (NOT NULL) column". How can I do it? Thanks!

Hello, don't call the column ID, that could be an ID relating to anything. Perhaps be a little more specific like emp_id .
Then to update it:
UPDATE Employee emp
SET emp_id = (
SELECT row_num
 FROM (
SELECT ROWID,
 ROW_NUMBER() OVER (ORDER BY ROWID) row_num
 FROM Employee emp2) emp2
WHERE emp.ROWID = emp2.ROWID);That will assign a new EMP_ID for each, beginning at 1.
Then:
ALTER TABLE Employee MODIFY emp_id NOT NULL;
ALTER TABLE Employee ADD CONSTRAINT EMP_PK PRIMARY KEY (EMP_ID);Then create a sequence for future population of the Employee table:
CREATE SEQUENCE emp_seq START WITH <maximum value of emp_id + 1>;

How to add header line in a file from XI system using file adapters

Hi All,
I need to add header line (Column names) in a file coming from XI system.
I am using file adapters.
Thanks & Regards,
Gaurav Mittal

The Receiver File Adapter is configured, using the following settings:
1) Choose File Content Conversion as the Message Protocol.
2) You give the addHeaderLine parameter as 1
3) For the fieldSeparator parameter you need to give field separator for both list and substructure (referring to the data type above). For eg: it may be a , (comma) for substructure in a comma separated file.
4) The endSeparator parameter needs to given for substructure only. For eg: it may be a nl (new line)
5) Give the file name, the directory and the Construction mode. Activate all the settings. Receiver File Adapter with F.C.C. is configured.
please visit the blog.
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2

How to add catalyst-old on an up-to-date Arch using xf86-video-ati?

Similar Messages

Maybe you are looking for