How to add sis programs to N8

Hello, how can I add freeware programs (.sis, not from OVI store) via OVI suite to my N8?

Connect the phone to PC and just Double Click on the .sis File...OVI Suite should launch automatically.. then follow instructions..
Other way is to send the .sis file to your Phone thru' Bluetooth. Open the receved message in the phone.. and it should start Installation.. Follow instructions..

Similar Messages

How to add funded program in report wirter in 4FBUDCON?

Hi!
How can I add the period/month and funded program in the report painter 4FBUDCON? I can't find the any characteristics values of them fromt he basic key figure of HSLT?
Thanks.

Hi Saurabh,
You need to create ABAP program in which you check the values for required process chain in
following table
RSPCLOGCHAIN (Feilds ANALYZED_STATUS LOG_ID)
Depend on values you can trigger next process or you can wait unitil this process chain complete.you need to check status from table using ABAP.
If you are not aware about how to write ABAP program then take help from ABAP Team.
Regards,
Ganesh Bothe

How to add/delete programs.

I am a new mac user and I have just gotten a refurb ibook. It already has itunes on it, but I want to install iLife in order to use imovie. But when I use the install CD it says it can't because I already have a newer version of itunes running. I don't plan to use itunes so I don't care if my ilife is an older version. But I cannot find the way to delete the itunes already loaded so the ilife will install. I cannot find the equivilant of add/remove programs from Windows control panel. Can anyone please help? Obviously, I am FAR from being a computer whiz so any help is MUCH appreciated. Thanks

The other advice posted will help you understand how to install iTunes, but on a Mac, there is no add/remove control panel. The easiest way to get rid of iTunes: open your application folder and drag iTunes to the trash. You can also open the /user/music folder and drag the iTunes folder to the trash. This will get rid of all the music on the computer and the iTunes preference files.
After you install iLife, you can upgrade to the latest version of iTunes.
BTW, isn't there an option early in the iLife installation to choose which components you want to install? If so, just uncheck the iTunes option and install the other components.

How to add zee program to lsmw.

HI all,
how to add the z program to lsmw.....
please can any one specify the process of embedding the
program to lsmw.

Hi Ramya,
if you want to see the result it should run first.
after adding abap program to process chain, activate it.
now right click on process chain start --> display variant --> change selection.
check what is the start condition, if it is nto in immediate then comback
click on edit --> change selection
select immediate --> unchek the periodic values. and save. come back
again click on save. come back.
now schedule your process chain by clikc on clock symbol.
after successfull completion of your process chain you can check in SE16
Regards,
Venkatesh

How to add Abap program in process chain to check the another process chain status and do accordingly

Hello All,
My requirement is related to process chain 1 . I have one process chain in that i have to put abap program in middle of that chain . This program will check the status of one another process chain 2 status ( whether it was completed or it is going on). if it is completed then continue the Process chain 1 to further activity else wait to complete Process chain 2 .
Here i have to use process chain 2 as a parameter.
Kindly provide me solution .
Regards
Saurabh

Hi Saurabh,
You need to create ABAP program in which you check the values for required process chain in
following table
RSPCLOGCHAIN (Feilds ANALYZED_STATUS LOG_ID)
Depend on values you can trigger next process or you can wait unitil this process chain complete.you need to check status from table using ABAP.
If you are not aware about how to write ABAP program then take help from ABAP Team.
Regards,
Ganesh Bothe

How to add Freely programmed input help in FPM Search UIBB?

Hi Experts!
We have a requirement to create search UIBB in which the input field should have a freely programmed input help.
I see that WD_VALUE_HELP parameter can be set to the component name and it displays the freely programmed help as well in the application.
However, I am still digging to implement the search help open and close events of the component.
I have used the Freely programed value help standard demo object " FREE_VALUE_HELP " which shows the value in the help popup however, the selected value is not returned in the input field.
I am also unable to find any Interface as provided for implementing OVS in search UIBB as well...
Please help.

Hi Aliaksandr,
Thanks for your response.
I have checked this WDA application demo_value_help .... but it is a normal WDA application.
However, I want use freely programmed search help in Search UIBB using FPM.
I found that we can provide the component name used as freely programmed search help in the attribute WD_VALUE_HELP of Interface IF_FPM_GUIBB_SEARCH.
https://help.sap.com/saphelp_nw74/helpdata/en/03/f2474b6d9a49f4b5a3ed6f04decf22/content.htm?frameset=/en/56/d151c3ba7b4b2e82068a084cb991f3/frameset.htm
And it displays the search help as well when I do F4 on the field of Search UIBB. But, we need to provide event handler for events - VH_WINDOW_CLOSED and VH_WINDOW_OPENED of the search help component (Component which is provided in WD_VALUE_HELP) some where in the Feeder class, in order to get the selecteed data from the search help, which I am unable to do.
Do you have any idea of such implementation?
Appreciate your response!

How to add one more field in Internal table

Hi Experts
i have declared an internal table
DATA: lt_viqmel_iflos TYPE TABLE OF viqmel_iflos.
viqmel_iflos is a Standared SAP Table,
Now i want to add one more Text field in the internal table only, how to add in program. any one plz help.
<REMOVED BY MODERATOR>
Mohana
Edited by: Alvaro Tejada Galindo on Feb 7, 2008 10:09 AM

you can put this:
types: begin of t_table_viqmel_iflos,
include structure of viqmel_iflos,
new_field type xxxx.
types: end of viqmel_iflos.
DATA: lt_viqmel_iflos TYPE TABLE OF t_table_viqmel_iflos.
Luck.

How to add custom fields to the sap standard program ukm_bp_display

How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?

Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
       partner LIKE but000-partner,
       credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
        INCLUDE STRUCTURE ukm_s_account.
        INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
      Gruppe Vector
        INCLUDE STRUCTURE ukm_s_bp_vector.
      Gruppe OBL = Obligo
      include structure UKM_S_BP_CMS_MALUSDSP_OUT.
        INCLUDE STRUCTURE ukm_s_display_segment.
        INCLUDE STRUCTURE ukm_s_bp_cms.
        INCLUDE STRUCTURE bus000_dat.
*DATA:   icon(4).
      Gruppe RAST (Raster)
DATA:
         rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas

How do you remove/add a program in the Control Panel that does not respond to the command?

Without being installed (by me) this "Dictionary.com" toolbar that appeared and is taking up a whole line of space across the top of my desktop monitor! I followed the procedure on how to remove the toolbar precisely... Start> Control Panel > Add/Remove Programs>
then clicked on the program > Remove which is "Dictionary.com" and the computer would not respond to the command. I cannot get it to respond to any program that I clicked on. When I clicked the "Remove" button , the area or line darkens to a light tan. and I cannot even close the menu.
This very strange and frustrating and I don,t know what to do.
I just want it removed or go away.
Thank you,Jeanette Gonzales

Try to remove some of Firefox plugins or addons, maybe there is Babylon toolbar.

How do I remove an advertising program by the name of SmartSuggestor? I cant find it in the ad ons and I cant find it in my add remove programs on my pc.

I keep getting these stupid ads that are apparently from smartsuggestor but I cant find the program anywhere on my pc then I contacted the company and they tell me that it is a firefox issue yet i cant find it in the firefox settings either. I went into the Smart Suggestor site and the name of the extension/program came up as "No extension Found". I cant find anything that even resembles anything to do with the program at all not in the add remove program through control panel or through the extension plug ins area in firefox and was wondering if anyone else has had the same problem.
I did not download this crap then all of a sudden I am plagued with pop up adds and other sorts of advertising all stemming from this bloody Smart Suggestor. I have got myself a good pc cleaner along with a few Malware removers and also upgraded my security programming but nothing will either find nor rid my pc of this problem. I have downloaded and reinstalled a fresh copy of Firefox and I am still having the same issue, has anyone else gone through this and how can I get rid of this problem?

Do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I need to add a program to my laptop, but I have forgotten my password. How can I reset it?

need to add a program to my laptop, but I have forgotten my password. How can I reset it?

Solution may be found if you search in the "More Like This" section over in the right column.

How to add a code TestIfElse(10) to the Main method of the Program.cs class?

How to add a code TestIfElse(10) to the Main method of the Program.cs class?
Here is my code and I have copied from the Wiley book for Microsoft certification page 14,
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace ifelse_Statement
class Program
static void Main(string[] args);
TestIfElse(10);
public static void TestIfElse(int n);
if(n < 10)
Console.WriteLine("n is less than 10");
else if(n < 20)
Console.WriteLine("n is less than 20");
else if(n < 30)
Console. WriteLine("n is greater than or equal to 30");
Here is the error list I am getting,
Error 1 Method must have a return type C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\switch_Statement\Program.cs
12 13
switch_Statement
Error 2
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\switch_Statement\Program.cs
12 24
switch_Statement
Error 3
Method must have a return type C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
12 9
ifelse_Statement
Error 4
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
12 20
ifelse_Statement
Error 5
Invalid token 'if' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 9
ifelse_Statement
Error 6
Invalid token '10' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 16
ifelse_Statement
Error 7
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 16
ifelse_Statement
Error 8
Invalid token '(' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
18 35
ifelse_Statement
Error 9
A namespace cannot directly contain members such as fields or methods
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
20 10
ifelse_Statement
Error 10
Type or namespace definition, or end-of-file expected
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
30 1
ifelse_Statement
Error 11
The type or namespace name 'n' could not be found (are you missing a using directive or an assembly reference?)
c:\users\pvs\documents\visual studio 2013\projects\lesson01\ifelse_statement\program.cs
16 12
ifelse_Statement
Error 12
'System.Console.WriteLine(string, params object[])' is a 'method' but is used like a 'type'
c:\users\pvs\documents\visual studio 2013\projects\lesson01\ifelse_statement\program.cs
18 26
ifelse_Statement

static void Main(string[] args){
TestIfElse(10);
public static void TestIfElse(int n)
if (n < 10)
Console.WriteLine("n is less than 10");
else if (n < 20)
Console.WriteLine("n is less than 20");
else if (n < 30)
Console.WriteLine("n is greater than or equal to 30");
Fouad Roumieh

How do you add a program to a "Space" in Lion?

I can see how to add a space in Mission Control, but how do you assign a program to a Space within Lion? It carried over my settings from Snow Leopard so there must be a way to change it or add to it. Can anyone find the hidden Space's feature?

Right click on the application icon in the dock. Select "Options" and then Choose to assign it to the particular space that you want (or to all or no spaces).
Cheers,
Rodney

How to create a workflow dealing with customizing program(Add-on program)

Dear ALL,
I am new to workflow and I was assigned to create a workflow related to an customizing program(Dynpro screen).
I know we can refer to some std. template for workflow developing.
However, I don't know how to create a brand new workflow to deal with the add-on program and table.
My major difficulty is how to create a new object:
--How to create the new event to track the operation of add-on program, for example, push 'submit' button.
--How to create method to update the add-on table.
I do hope someone could give me some guidance.
Thank,
Gary

This is a Function Module that triggers an event ob Business Object tht you will create by making a subtype of Business Object. Use Transaction Code SWO1 to do so.
FUNCTION zwf_process_trip.
""Local Interface:
*" IMPORTING
*" VALUE(I_EMP_NUMBER) TYPE PERNR_D
*" VALUE(I_EMP_TRIP) TYPE REINR
INCLUDE <cntn01> .
DATA:i_emp_details TYPE STANDARD TABLE OF p0001, "Employee Details
 wa_request TYPE p0001, "Workarea for Employee details
 v_country_grp TYPE molga, "Country SubGrouping
 v_object_key TYPE sweinstcou-objkey. "Key for the buisness object ZWOBUSTRIP
CONSTANTS: c_bo_trip TYPE swo_objtyp VALUE 'ZWOBUSTRIP',
 c_event_trip TYPE swo_event VALUE 'TripCreate',
 c_infy_type_1 TYPE infty VALUE '0001'.
Event Container declaration
swc_container i_event_cont.
swc_create_container i_event_cont.
Reading the INFO TYPE 0001 to obtain the
Employee details
CALL FUNCTION 'HR_READ_INFOTYPE'
 EXPORTING
 pernr = i_emp_number
 infty = c_infy_type_1
 begda = sy-datum
 endda = sy-datum
 TABLES
 infty_tab = i_emp_details
 EXCEPTIONS
 infty_not_found = 1
 OTHERS = 2.
SY-SUBRC check is not required as the error
handelling will be done by WorkFlow rule
resolution.
CLEAR wa_request.
READ TABLE i_emp_details INTO wa_request INDEX 1.
IF sy-subrc = 0.
Retrieving the Country SubGrouping for the employee
 SELECT SINGLE molga
 FROM t001p
 INTO v_country_grp
 WHERE werks = wa_request-werks
 AND btrtl = wa_request-persk.
ENDIF.
Sending the relevant data to event container
swc_set_element i_event_cont 'EmpId' i_emp_number.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'PersonnelArea' wa_request-werks.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'CountryGrouping' v_country_grp.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'EmpSubGrp' wa_request-persk.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'EmpTripId' i_emp_trip.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
Raising the event to trigger the workflow
v_object_key = i_emp_number.
CALL FUNCTION 'SWE_EVENT_CREATE'
 EXPORTING
 objtype = c_bo_trip
 objkey = v_object_key
 event = c_event_trip
 TABLES
 event_container = i_event_cont
 EXCEPTIONS
 objtype_not_found = 1
 OTHERS = 2.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
COMMIT WORK.
ENDFUNCTION.
SWEL Transaction Code is used to track event linkage.
SWUS is used to test Workflow manually with single test.
Please reward points if useful
Thanks
Arghadip

How to add a Z program in transaction F110

Hi friends,
from Tcode F110 we can get the payment proposal, now i want to add a my own Z program where the payment proposal report is displayed. I am adding a Z report because in standard report G/L account No is missing.
So my question is how to add the G/L Account No
1) Can i add my own Z report, if yes how
2) Or is there any other way of displaying G/L Account No.
Regards,
Amit

Hello Amit,
1. You can add the Z-Program to the F110 trxn.
You must configure the payment program against your Country & Payment Method.
1. Goto trxn FBZP, select "Pymt Methods In Country" button.
2. Select the Country & Pymt Method for which you want to configure the Z-Program. Here you can enter the Z-Program name in the "Pymt Medium Program" box.
Generally the Functional consultant do this. Hope this helps.
BR,
Suhas

How to add sis programs to N8

Similar Messages

Maybe you are looking for