How to avoid batch numbers without stock in standard searchhelp?

Hi Experts,
Is there any choice to limit search help values for batch number only to batches, which have stock? I don't want to see batches, which have zero stock.
Thanks&regards,
Jirka

yes u can enhance the search help in se11.

Similar Messages

  • How to avoid purchase req and stock transport order to take part in MRP.

    Please suggest how to avoid purchase req and stock transport order to take part in MRP.

    hi,
    check the settings for the MRP type...there you need to show which doc will be taken into considerations...
    SPRO >> MM >> CBP...
    Under CBP check for the MRP settings where it is placed(check under master data settings)...and check for the indicator for PR's and STO's release orders under tab "Additional external req. in the reorder point planning"..
    Regards
    Priyanka.P

  • How display possible batch numbers according material number in cv04n

    Hi All,
    cv04n -->clasifications,  there is fields availables like batch number, material number.
    initially in batch number field not available f4 help, material number f4 help is available.
    my requirement is create f4 help for display possible batch numbers, for this i create zfunction module and done f4 help for batch numbers.
    but first enter material number then display batch numbers whenever click f4  according material number.
    in my zfunction module how i know user which material number entered.
    how display, please give me solution with coding.

    Check following customizing:
    Logistics General --> Batch Management --> Specify Batch Level and Activate Status Management
    If you want to change the batch level, you have to start conversion to activate the change.
    Note that you cannot reset conversion from plant level to a higher level, read the documentation for customizing of
    "Specify Batch Level and Activate Status Management".
    If you want to work with same batches for different materials, you should use "Batch unique at material level".
    Logistics General --> Batch Management --> Batch Number Assignment
    Here you can define how the system should create batch numbers.
    Best Regards, Dirk

  • How to print batch numbers on the AR invoice print out

    Hi Gurus;
    Here is my question; I need to be able to print batch numbers on the print out of AR invoices, I used variable 492 in PLD and I am able to see the batch numbers directly linked with the AR invoice, meaning that I wont be able to see batch numbers that I entered on the Delivery even is the delivery doc was copy to the AR invoice.
    Is there anyway that I can see the batch numbers on the AR invoice print if I entered the batch number on the delivery and then copied that delivery to an invoice??
    My client wants to be able to send their customers and invoice with a batch number but he always follow the process from sales order to delivery and delivery to AR invoice and what this means is that he always entered the batch numbers on the delivery documents.
    Please help me!!!
    Thanks
    Jenny

    If the ad hoc printer mode is not available for the envy, there are some reasonably cheap ways to get a wifi network in your car.   A cheap router from best but will generate the wifi network.  Does not matter if you have Internet or not.  A ifi device will also work, and most/ all of them run on batteries.  Lastly, if you have a smart phone or I phone that generates a wifi hotspot, that may be enough to support the printing function.  ( I need to test my I phone later today to see if that works.)

  • How to avoid decimal numbers?

    Hi Experts,
    I am picking PO Quantity(MENGE) field from RSEG table and displaying in the report output. It is displaying the value has '13.000' , but I need to display the same value has '13' in the report output.
    Just I need to avoid the decimals characters.
    Please help me out, useful answer rewarded with points.
    Thanks,
    Raju

    Hi Raju
    If ur using basic list
    use DECIMALS  addition with WRITE statement
    ex: WRITE rseg-menge DECIMALS 0.
    elseif ur using ALV
    populate the fieldcatalog table with the following parameter & value for that particular field
    parameter : DECIMALS_OUT
    value        :  0  (Zero)
    ex:
    WA_FIELDCAT-DECIMALS_OUT        =  0.
    reward if useful.
    Regards
    Prabumanoharan

  • How Generating Series Of Numbers Without  use Sequences

    i wana use insert table
    i use
    insert table_name (id)
    vaule (( SELECT ROWNUM N FROM dual CONNECT BY LEVEL <= 20))
    but error ORA-01427: single-row subquery returns more than one row

    ali_alkomi wrote:
    ORA-01427: single-row subquery returns more than one row
    insert into FISH_FAMILIES(SCIENCE_NAME,ARABIC_NAME,LATIN_NAME,IS_FAMILY)
    values ( (select distinct FAMILY from FISH_SPECIES) ,(select ARABIC_DESCRIPTION from FISH_SPECIES) ,(select LATIN_DESCRIPTION from FISH_SPECIES),(select distinct IS_FAMILY from FISH_SPECIES
    ))STOP POSTING YOUR SAME QUESTION ON DIFFERENT THREADS!
    how use insert more than query (select)
    If you continue posting the same on both threads, I will lock or delete one of them.

  • Goods receipt without stock

    How to do goods receipt without stock for a stock material? Is there a way to create a material document without stock posting?

    in case you do a goods receipt to a third party order, it is just statistical and does not update your stock figures.

  • Batch Numbers in XL Reporter

    Hi All
    Does anyone know if it's possible to view batch numbers of stocked items using XL Reporter?
    Many thanks
    Hayden

    Hi Hayden,
    XL Reporter is not that user friendly to certain type of report. Batch numbers will be one of the example.
    You had better try Crystal Reports.
    Thanks,
    Gordon

  • How to upload Initial Batch Numbers through DTW?

    Dear All,
    How can we import the Batch Numbers along with the initial quantities of stock into SAP B1 using DTW?
    I understand that we can use "OITW - StockTaking" template to import the initial quantities. Is there any way we can import Batches also at the same time using DTW?
    Regards,
    Bharath S

    Hi Bharath,
    Checked this thread: Re: DTW Stock Taking use a batch

  • Clearing/downdating stock (with batch numbers) error messages

    Hi,
    We are trying to clear down some stocks with batch numbers and have tried MB1A LT01/LT10.  However, we get the following error messages (all individual);
    Deficit of BA Unrestricted-use (Deficit of BA Unrestricted-use 56.855 KG : 4589 BP01 0088 0000199415)
    Storage unit 4000289374 is not consistent with other transfer order data
    Showing zero for stock & cannot clear transfer order
    How can we clear the stocks please?
    Thanks
    Keeley

    Deficit of BA Unrestricted-use  is a pure MM message.
    It just tells you that you have no stock of the mentioned batch 0000199415 of material 4589 in plant BP01 at storage location 0088.
    check in MMBE where or in what status your stock of this batch is, then change the fields in MB1A accordingly.

  • How to find batches for "stock for vendor".

    Hi all,
    My requirement is as follows.
    when we execute MMBE for any material. It will display the stock of material in different Storage locations of the plant with respective matches.
    for example:
    MATERIAL 12345
    PLANT 1234                                                                    4663
    STOCK PROVIDED TO VENDOR                                      1962
                     BATCH1                                                          1960
                     BATCH2                                                               2  (similarly for others given below)
    SCRP
    BATCHES                                                                     QUANTITY
    WHYC
    BATCHES                                                                      QUANTITY.
    I want to know the batches in the stock provided to vendor.
    we can find all batches to material in MSEG and MCH1 tables. but i dont understand how to distinguish between stock provided to vendor and other storage locations.
    hope i am able to explain my problem clearly.
    can anybody help me on this.
    Thanks.

    Hi!
    The vendor consignation stock can be seen in the transaction MB54.
    It is stored in the MKOL table.
    This kind of stock is phisically stored at your storage place, however, it belongs to the vendor, until your company does not pay for it.
    Regards
    Tamás
    Edited by: Tamás Nyisztor on Jul 29, 2008 4:01 PM

  • How to avoid special stock indicator for intercompany sales transitions.

    Hi Friends
    I have an issue Intercompany sales .if I  enter intercompany plant(Delivering plant) in the sales order system is taking special stock indicator and looking for sales order stock.
    If I enter company code plant for sales from unrestricted stock, system is not taking special stock indicator.
    Please advice how to avoid special stock indicator for intercompany sales transitions.
    Thanks in advance.
    SRK

    Ravi,
    Special stock is generally determined by the MRP strategy group in the material master of the plant against which you place your order.  The strateg(ies) contained in the strategy group will determine the SO requirements type, which will in turn determine whether or not the order is 'account assigned' (special stock).  
    It is normal to only have one strategy contained in a strategy group.  However (and I seldom recommend this) SAP will support multiple strategies within one strategy group.  In this case, you could have both MTS and MTO orders against the same plant/material, by manually altering the requirements type in the sales order.  This scenario is usually difficult for a planner, and involves additional manual attention to make everything work.
    I suggest that your first avenue is to change the Strategy group in the material master of the delivering plant to one that supports MTS.  This has a big impact in Controlling and in Production Planning, so ensure that all affected functional groups are aware of what you are doing, and of the resulting changes that they will experience.  The transition from MTO to MTS must be carefully controlled.
    If you are not a PP expert, I suggest you consult with your local PP expert before embarking on this change.
    Best Regards,
    DB49

  • How can I eliminate duplicate Batch Numbers?

    SBO allows serial numbers to be unique, but not batch numbers. The system allows the same batch number to be used for a different part. I have a medical company that requires unique Batch numbers accross the board, regardless of part number. Any suggestions? I tried to do this with a formatted search that would identify a duplicate Batch for me, but my search crashed and burned.
    Here is the Formatted Search I tried to connect to the Batches Setup Form:
    SELECT 'Batch allready used!' FROM IBT1 T0 WHERE T0.[BatchNum] = $[$3.3.0]
    Anyone out there know how to force unique batch numbers?
    Thanks!
    Mike
    Edited by: Mike White on May 7, 2008 7:07 PM

    What I am saying is, I never want a duplicate Batch number even if the parts are different. In your example, Item A could not have the same Batch number as Item B. Unfortinately, SBO allows duplicate batch numbers as long as the part numbers are different.
    The reason for this is two fold. 1) This medical company cannot, never have the same batch number, and 2) reporting from the OIBT and IBT1 tables gets a bit complicated with duplicate batch numbers.
    So my thought is to simply create a formatted search which runs from the Batches Setup Form, checking to see if this Batch Number has allready been used, then replacing the entry if TRUE with something like "Batch Allready Assinged".
    Mike
    Edited by: Mike White on May 7, 2008 7:36 PM

  • How can I move columns in Numbers without distorting the formula in other cells?  In Excel I can cut and paste entire columns and the formula in other cells adjusts accordingly.  When I do it in Numbers, the formula messes up.  How can I do this?

    How can I move columns in Numbers without distorting the formula in other cells?  In Excel I can cut and paste entire columns and the formula in other cells adjusts accordingly.  When I do it in Numbers, the formula messes up.  How can I do this?
    For example: I have formulas in columns D and F that relate to columns C to CU
    If I want to move one column from one position to another (say S to T), the formula loses the colums that was moved, i.e. it doesn't recognize it has moved, rather sees it as deleted...  How can I do this without distorting the formula?

    Thanks for the feedback.
    If I often urge askers to look at the available resources, it's because  a large range of questions asked in the forums are already answered in these documents.
    As they are PDFs, they are easy to search in.
    CAUTION
    Download them while they are available.
    Given what is delivered with iBooks Author, I'm afraid that we will not get such easy to use documents.
    Searching infos in the  iBooks Author documentation available on line is awfully cumbersome and a lot of embedded links are wrongly flagged this way. In the Help files they aren't links but underlined strings.
    It seems that the tool used to generate the web pages was wrongly configured.
    Yvan KOENIG (VALLAURIS, France) dimanche 22 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
    My iDisk is : http://public.me.com/koenigyvan

  • How to set up Batch Management and stock determination ?

    Our client deals in various food articles and wish to use batch management and shelf life functionality.
    Details are
    While doing the goods receipt, batch no. as supplied by vendor will be entered. There is no requirement of batch no. generation. Thus batch no. as supplied by vendor will be used for identifying the stock. It will be also having fix shelf life and will be entered while doing the goods receipt. Now at the time of goods issue for consumption, or stock transfer to other plant system should propose the batch no. for material which will be having earliest expiry date (For ex. on 15.01.2010 we receive the goods with batch no ABC having expiry date as 31.03.2010 and we receive another lot on 20.01.2010 with batch no. XYZ having expiry date on 25.03.2010, then while doing the goods issue for consumption or stock transfer, system should propose the lot with batch no. XYZ and not ABC). How to achieve this?
    As I am new to batch management please provide detail configuration steps for batch management and stock determination. We are not using warehouse management.
    Thanks in advance,
    Satish

    Hi,
    Please refer below link
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOBM/LOBM.pdf
    Regards,
    Nitin Amritkar

Maybe you are looking for