How to capture packets and send to a sniffer

I have searched these forums but did not find anything on how to do this. I did this once several years ago but cannot remember how I did it. What I do remember is that I used the "debug" command and SPAN on the 6509 and the designated port where all the traffic passes through to the router and then pointed to the IP of the sniffer. I am using a Cisco 6509(core switch) and 3845 (WAN router) and a Fluke Optiview II and snmp.

Search CCO for that
http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_tech_note09186a008015c612.shtml#topic6
Plenty of examples
Cheers,
Michel

Similar Messages

How can I scan and send a copy to my email

How can I scan and send a copy to my email

Hi madroleumbellum,
I'll need to know the exact model you are asking about. Can you find either the product number or the model number?
Thanks
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

How can I design and send emailers using Adobe Muse?

Hello Geeks,
How can I design and send emailers using this wonderful software called Adobe Muse?

Hi
Are you referring , creating email templates or sending marketing campaigns ?
We cannot create templates as Muse doesn't output HTML optimized for e-mail output.
Regarding email campaigns, you can setup this from hosting platform end.
More details :
https://forums.adobe.com/message/5469744
Re: Is it possible to create email templates using Muse?
Thanks,
Sanjit

How to calculates averages and send to a file?(source code)

how to calculates averages and send to a file?(source code) I need to get started but I don't know where to begin...........the book I have doesn't really say how to handle averages and send to a file.................anybody got suggestions on how to get started? I am a newbie so place in layman's terms.............thanx

To calculate an average: add all of the numbers together and divide by how many numbers you added together.
ex: (1 + 2 + 3 + 10)/4 = 4 (4 is the average)
As for writing them to a file, look over the API for random or sequential access files.

How do I create, and send a group email on my iPhone?

How do I create, and send a group email from my iPhone 4?

How to send group email without additional APP
Just spent an hour on ichat. Long and short....can't send group email. The group name appears in the TO: line, but if you click on the group name, only the first email address is blue..the rest are black and will not get the email. We tired using the CC and BC lines...same result.
However here is one solution:
I sent one email with each of the group (we are only 9 ) in the TO: line. I included my primary email. When it came to the iphone, i moved it to one of the subfolders. (Each account you may have has a list of the inbox at the top and Account at the bottom. ... that is where you can access the subfolder)
I moved the email with all names to that subfolder. I can then, open it ...do a relpy to all and just change the message and subject line. It is cumbersome, but it does work. I really think Apple, a company committed to ease of use, needs to review this flaw. I suspect it may be a bandwidth economy .... and i feel the pain of the providers...but you did create the beast.

Capturing Footage and Sending it out!

I haven't captured footage from an actual tape source in so long, i'm not sure if I have the right stuff. I always get footage from cards or a FireWire cable I'm not sure how to capture from a broadcast camera. Will i need some sort of device that turns a BNC and XLR into Firewire or USB?
I also need to send it back out BNC and XLR also...
Scott

Yup. You need an IO device from AJA, Blackmagic Design or Matrox. You have an iMac? I hope it has Thunderbolt, for if not, you are SOL.
The ONLY device that will turn broadcast video connections into workable (non-DV) video is the AJA IoHD. It has been discontinued, as it only worked with FCP 6 and 7 (now dead products). And when it was made, it was $3500. But a GREAT box for that. If only Apple stuck with moving ahead with FCP instead of side stepping. Maybe you can rent one?
If you only have firewire, the only option is the IoHD. Unless you convert the signals to DV....which would stink as it's the lowest quality SD format out there. For that you can get the ADVC-300 from Canopus.
aja.com
decklink.com

How to ZIP file and send via SMTP in Oracle

Dear All,
I want to send data every month via email where the data i got from view.
The problem is the file is to big, so i should zip it.
the question is How i can perform it with procedure and send it automatically via Job every 1st month
what i've done was i create a procedure to make the file in zip
[quote/]
CREATE OR REPLACE PROCEDURE production.CREATE_EXCEL_DTKPITerminate IS
    vvrun varchar2(3000);
    vsender varchar2(100);
    vrecepient varchar2(100);
vccrecipient varchar2(1000);
    vsubject varchar2(1000);
    vmessage long;
    v_loc varchar2(5);
   NAME:       CREATE_EXCEL
   PURPOSE:
   REVISIONS:
   Ver        Date        Author           Description
   1.0        10/15/2012          1. Created this procedure.
   NOTES:
   Automatically available Auto Replace Keywords:
      Object Name:     CREATE_EXCEL
      Sysdate:         10/15/2012
      Date and Time:   10/15/2012, 9:42:40 , and 10/15/2012 9:42:40
      Username:         (set in TOAD Options, Procedure Editor)
      Table Name:       (set in the "New PL/SQL Object" dialog)
begin
   vsender := '[email protected]';
     vrecepient := '[email protected]';
vccrecipient := '[email protected]';
     vsubject := 'KPI Terminate'||TO_CHAR(SYSDATE,'MM-YYYY');
     vmessage :=
        'MESSAGE .';
     as_xlsx.query2sheet('
     select cmp_company,emp#,name,class,goucode,goudesc,job,job_name,tglkeluar
            ,nac_seq,nac_code,nac_type,nac_begin,nac_desc,reason,reason_code
            from V_KPITerminate
     --insert into blobs(blob_id,blob_name)
     --values (1,as_xlsx.finish);
     SEND_SMTP_PUZZLE_DTKRY(vsender,vrecepient,vccrecipient,vsubject,vmessage,as_xlsx.finish,'DataKPITerm -'||to_char(sysdate,'yyyy')||'.zip');
--as_xlsx.save( 'BASE_DIR3', 'SWT.xls' );
end;
[/quote]
when i execute this, Error ocured
Message       : ORA-29278: SMTP transient error: 421 Service not available
ORA-06512           : at "SYS.UTL_SMTP", line 21
ORA-06512           : at "SYS.UTL_SMTP", line 97
ORA-06512           : at "SYS.UTL_SMTP", line 399
ORA-06512           : at "PU22PROD_123.SEND_SMTP_PUZZLE_DTKRY", line 151
ORA-29294           : A data error occurred during compression or uncompression.
ORA-06512           : at "PU22PROD_123.CREATE_EXCEL_KPITERM", line 60
ORA-06512           : at line 2
cann anyone help?
the data is too big so i prefer it zip.. can anyone help..
the SMTP I use is like this
CREATE OR REPLACE PROCEDURE production.SEND_SMTP_PUZZLE_DTKRY (pSender VARCHAR2,pRecipient VARCHAR2, pCCRecipient VARCHAR2, pSubject VARCHAR2,pMessage LONG,pattach BLOB,pfilename VARCHAR2) IS
v_src_loc BFILE := BFILENAME('BASE_DIR3', 'pajak.xls');
      l_buffer   RAW(54);
      l_amount   BINARY_INTEGER := 54;
     l_pos      INTEGER := 1;
     l_blob     BLOB := EMPTY_BLOB;
     l_blob_len INTEGER;
      v_amount   INTEGER;
      crlf CONSTANT VARCHAR2(2):= CHR(13) || CHR(10);
v_connection_handle UTL_SMTP.CONNECTION;
    v_smtp_host          VARCHAR2(30) := 'mail.mayora.co.id'; --My mail server, replace it with yours.
    v_subject            VARCHAR2(30) := 'Your Test Mail';
    l_message            VARCHAR2(200) := 'This is test mail using UTL_SMTP';
pcc varchar2(50);
i number := 1;
j number := 1;
l_original_blob blob;
l_compressed_blob blob;
BEGIN
   BEGIN
     /*Preparing the LOB from file for attachment. */
     --DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
     --dBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
     --v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
     --DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
     --l_blob_len := DBMS_LOB.getlength(l_blob);
l_original_blob     := pattach;
     l_compressed_blob   := TO_BLOB('1');
UTL_COMPRESS.lz_compress (src => l_original_blob,
                               dst => l_compressed_blob);
--DBMS_LOB.FREETEMPORARY(l_compressed_blob);
l_blob := l_compressed_blob;
     l_blob_len := DBMS_LOB.getlength(l_blob);
     /*UTL_SMTP related coding. */
     v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
     UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
     UTL_SMTP.MAIL(v_connection_handle, psender);
     UTL_SMTP.RCPT(v_connection_handle, precipient);
    if pCCRecipient is not null then
        if(instr(pCCRecipient,',') = 0) then
        utl_smtp.rcpt(v_connection_handle, pCCRecipient);
        else
       while(instr(pCCRecipient,',',i) > 0)
        loop
        pcc := substr(pCCRecipient,i, instr(substr(pCCRecipient,i),',')-1);
        i := i+instr(substr(pCCRecipient,i),',');
        utl_smtp.rcpt(v_connection_handle,pcc);
        end loop;
        pcc := substr(pCCRecipient,i,length(pCCRecipient));
        utl_smtp.rcpt(v_connection_handle,pcc);
        end if;
    end if;
     --UTL_SMTP.RCPT(v_connection_handle, v_cc_email_address);
     UTL_SMTP.OPEN_DATA(v_connection_handle);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'FROM' || ': ' || psender || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'TO' || ': ' || precipient || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'CC' || ': ' || pCCRecipient || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'SUBJECT' || ': ' || pSubject || UTL_TCP.CRLF);
   --MIME header.
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'MIME-Version: 1.0' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         ' boundary= "' || 'BASE_DIR3.SECBOUND' || '"' ||
                         UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     -- Mail Body
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         '--' || 'BASE_DIR3.SECBOUND' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Type: text/plain;' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         ' charset=US-ASCII' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, Pmessage || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     -- Mail Attachment
   UTL_SMTP.WRITE_DATA(v_connection_handle,
                         '--' || 'BASE_DIR3.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Type: application/octet-stream' ||
                         UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         ' filename="' || pfilename || '"' || --My filename
                         UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
   /* Writing the BLOL in chunks */
     WHILE l_pos < l_blob_len LOOP
       DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
       UTL_SMTP.write_raw_data(v_connection_handle,
                              UTL_ENCODE.BASE64_ENCODE(l_buffer));
       UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
       l_buffer := NULL;
       l_pos    := l_pos + l_amount;
    END LOOP;
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     -- Close Email
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         '--' || 'BASE_DIR3.SECBOUND' || '--' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
     UTL_SMTP.CLOSE_DATA(v_connection_handle);
     UTL_SMTP.QUIT(v_connection_handle);
EXCEPTION
    WHEN OTHERS THEN NULL;
    --return 1;
      UTL_SMTP.QUIT(v_connection_handle);
      RAISE;
END;
END;

this is my smtp procedure
CREATE OR REPLACE PROCEDURE PROD.SEND_SMTP_PUZZLE_DTKRY (pSender VARCHAR2,pRecipient VARCHAR2, pCCRecipient VARCHAR2, pSubject VARCHAR2,pMessage LONG,pattach BLOB,pfilename VARCHAR2) IS
v_src_loc BFILE := BFILENAME('BASE_DIR3', 'pajak.xls');
      l_buffer   RAW(54);
      l_amount   BINARY_INTEGER := 54;
     l_pos      INTEGER := 1;
     l_blob     BLOB := EMPTY_BLOB;
     l_blob_len INTEGER;
      v_amount   INTEGER;
      crlf CONSTANT VARCHAR2(2):= CHR(13) || CHR(10);
v_connection_handle UTL_SMTP.CONNECTION;
    v_smtp_host          VARCHAR2(30) := 'mail.mayora.co.id'; --My mail server, replace it with yours.
    v_subject            VARCHAR2(30) := 'Your Test Mail';
    l_message            VARCHAR2(200) := 'This is test mail using UTL_SMTP';
pcc varchar2(50);
i number := 1;
j number := 1;
l_original_blob blob;
l_compressed_blob blob;
BEGIN
   BEGIN
     /*Preparing the LOB from file for attachment. */
     --DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
     --dBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
     --v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
     --DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
     --l_blob_len := DBMS_LOB.getlength(l_blob);
l_original_blob     := pattach;
     l_compressed_blob   := TO_BLOB('1');
UTL_COMPRESS.lz_compress (src => l_original_blob,
                               dst => l_compressed_blob);
--DBMS_LOB.FREETEMPORARY(l_compressed_blob);
l_blob := l_compressed_blob;
     l_blob_len := DBMS_LOB.getlength(l_blob);
     /*UTL_SMTP related coding. */
     v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
     UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
     UTL_SMTP.MAIL(v_connection_handle, psender);
     UTL_SMTP.RCPT(v_connection_handle, precipient);
    if pCCRecipient is not null then
        if(instr(pCCRecipient,',') = 0) then
        utl_smtp.rcpt(v_connection_handle, pCCRecipient);
        else
        while(instr(pCCRecipient,',',i) > 0)
        loop
        pcc := substr(pCCRecipient,i, instr(substr(pCCRecipient,i),',')-1);
        i := i+instr(substr(pCCRecipient,i),',');
        utl_smtp.rcpt(v_connection_handle,pcc);
        end loop;
        pcc := substr(pCCRecipient,i,length(pCCRecipient));
        utl_smtp.rcpt(v_connection_handle,pcc);
        end if;
    end if;
     --UTL_SMTP.RCPT(v_connection_handle, v_cc_email_address);
     UTL_SMTP.OPEN_DATA(v_connection_handle);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'FROM' || ': ' || psender || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'TO' || ': ' || precipient || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'CC' || ': ' || pCCRecipient || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                           'SUBJECT' || ': ' || pSubject || UTL_TCP.CRLF);
     --MIME header.
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'MIME-Version: 1.0' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         ' boundary= "' || 'BASE_DIR3.SECBOUND' || '"' ||
                         UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     -- Mail Body
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         '--' || 'BASE_DIR3.SECBOUND' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Type: text/plain;' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         ' charset=US-ASCII' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, Pmessage || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     -- Mail Attachment
   UTL_SMTP.WRITE_DATA(v_connection_handle,
                         '--' || 'BASE_DIR3.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Type: application/octet-stream' ||
                         UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         ' filename="' || pfilename || '"' || --My filename
                         UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
   /* Writing the BLOL in chunks */
     WHILE l_pos < l_blob_len LOOP
       DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
       UTL_SMTP.write_raw_data(v_connection_handle,
                              UTL_ENCODE.BASE64_ENCODE(l_buffer));
       UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
       l_buffer := NULL;
       l_pos    := l_pos + l_amount;
    END LOOP;
     UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
     -- Close Email
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         '--' || 'BASE_DIR3.SECBOUND' || '--' || UTL_TCP.CRLF);
     UTL_SMTP.WRITE_DATA(v_connection_handle,
                         UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
     UTL_SMTP.CLOSE_DATA(v_connection_handle);
     UTL_SMTP.QUIT(v_connection_handle);
EXCEPTION
    WHEN OTHERS THEN NULL;
    --return 1;
      UTL_SMTP.QUIT(v_connection_handle);
      RAISE;
END;
END;
is there a mistake?

How to capture date and userdi in the alert mail

Hi,
In the alert mail I want to capture the userid, date and time. In the container I can define these variables but I was unable to caputre the values. Iam not using any BPM scenario. Can any body help me in this regard how to capture these values. Thanks in advance.
Thanks & Regards,
Mallikarjun.M

Hi,
Iam using the correct dict type as you mentioned in the above mail. But in my mail it shows that the container elements ZDATE of type SWFXST_DATE, ZTIME of type SWFXST_TIME as not found. I hope this will be solved.
Thanks,
Mallikarjun.M

How to acquire data and send via tcp/ip

well guys i'm having a problem here
i will have a client and a server....
the client will stay at my home doing some kind of monitoring
and i want that my client send this informations to me here in my work
the informations are 6 variables
3 voltages and 3 currents i already did a program for try the communication
and it works.... i used the random number only to see if i was receiving the values
and it works perfectly
now i have to put the real values... i will use a daqMX.. i don't know the exaclty daq.. but is the cheapest... because i don't need too much things...
how could i put the client to make this monitoring and send the data to me??
thanks for the help!

I assume you meant the USB-6215, as there is no 6125.
I would suggest looking over this page: Getting Started with NI-DAQmx: Basic Programming with NI-DAQmx. It contains a wealth of information on using DAQmx.
You can use MAX to create a simulated 6215 so you can create tasks and
then implement your code using the simulated device. This will allow you to write the code and test it without actually having the device. Since the 6215 has only analog inputs I am assuming you're using something like a shunt to measure your 3 currents. As I noted, there are tons of examples that ship with DAQmx - just use
the Example Finder to find them. For what you're doing you can probably
get away with just using the DAQ Assistant Express VI. However, that
Express VI generates dynamic data, which you will need to convert to an
array in order to send it over TCP/IP. This can be done using the
Convert From Dynamic Data VI (in the Express palette).
Attached is a simple example using the DAQ Assistant. The task is configured to get just one sample from each channel. You will need to modify the code if you are getting N samples from each channel (i.e., basically a 2D array). In order to run this VI you will first need to create a simulated 6215 in MAX. Please read the documentation in MAX on how to create simulated devices. The 6215 is in the "M" branch when you get the dialog to select a device.
Attachments:
teste 3-B - server MOD.vi ‏123 KB

How to create idoc and send it frm one sap to another sap

hi,
can anyone tell me the complete procedure of creating the idoc and sending it to another sap r/3
how to create rfc destination, partner profiles, port and outbound parameter and inbound parameter
thanks

Hi Azhar,
Go through the following Links
IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Go through the following Steps for Creating IDoc Via ALE
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
        save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
   select all what ever you want and delete remaining fields.
   save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
   it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
   give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards
Sreeni

Need information for how to capture, transmit and receive a DTMF tone

Hello every body
I would like to implements the DTMF where i need some information that hoe i can
1) Capture the tone mean when i press button 'one' it has to capture and generate a vaoice file.
2) And i need to transmit the same thing to a remote system.
3) At the remote system how i can reveive and identify that the tone is for 'one'.
Thanks to ............. advance
Sreenath Kulkarni

JMF isn't the right tool - it's about handling media streams
You could use it to capture the audio source, then obtain the audio samples,
But you would then have to perfom some signal processing on it to interpret/decode for tone detection
This is what should already be available via the JTAPI API (haven't checked but should do this sort of thing)
ie you should be able to code up an application that receives 'DTMF Tone' events & does whatever you need to do in response
This is what IVR systems do

Need information for how to Capture, Transmit, and Identify a DTMF tone

Hello every body
I would like to implements the DTMF where i need some information that hoe i can
1) Capture the tone mean when i press button 'one' it has to capture and generate a vaoice file.
2) And i need to transmit the same thing to a remote system.
3) At the remote system how i can reveive and identify that the tone is for 'one'.
Thanks to ............. in advance
Sreenath Kulkarni

JMF isn't the right tool - it's about handling media streams
You could use it to capture the audio source, then obtain the audio samples,
But you would then have to perfom some signal processing on it to interpret/decode for tone detection
This is what should already be available via the JTAPI API (haven't checked but should do this sort of thing)
ie you should be able to code up an application that receives 'DTMF Tone' events & does whatever you need to do in response
This is what IVR systems do

How to calculate averages and send to a file?(source code)

Having trouble the book isn't very clear on how to use averages.............could some give me an example of a program..................that gets averages and send to a file..........?

From Deitel and Deitels monster 'How to Program' :
import javax.swing.JOptionPane;
public class Average {
public static void main ( String args[] )
int total, gradeCounter, gradeValue, average;
Swing grade;
total = 0;
gradeCounter = 1;
while ( gradeCounter <= 10 ) { //assuming 10 values
grade = JOption.showInputDialog ( "Enter grade: " ) ;
gradeValue = Integer.parseInt ( grade );
total += gradeValue;
gradeCounter = gradeCounter + 1;
average = total / 10;
JOptionPane.showMessageDialog (
null, "Class Average is" + average, "Class Average",
JOptionPane.INFORMATIOIN_MESSAGE );
System.exit ( 0 );
Import package java.io
Three stream objects are created when you execute , System.in, System.out, System.err
System.out can be directed to send it's output to a file or disk.

Photosmart C7280 -how do I scan and send a document or photo using windows7 home premium?

I have a 7280 photosmart. I am older generation computer illiterate-please can someone tell me how to scan and send a document or photo using windows7 home premium (64)

Hi scotka
I know this is a few weeks ago but I see no one replied. You'll find information on how to scan in the manual (~ pg118). Any hassles just let me know....
http://h10032.www1.hp.com/ctg/Manual/c01102249.pdf
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

How to capture screen and consult captures

Just wondering how to capture my desktop as a snapshot, and where do I find it after ?

command+shift+3 to take a shot of the whole desktop, command+shift+4 to take a shot of a selected portion. It saves to the desktop by default.

How to capture packets and send to a sniffer

Similar Messages

Maybe you are looking for