How to configure EP7 to use LDAP users?

We need our EP to use LDAP as our user source exclusively.
Our LDAP can be MS directory service OR iplanet.
Can anybody help give the details how to achieve it?
Points guaranteed. Thanks!

Hi,
To configure your EP to LDAP you need to set the following properties in config tool. Please, refer the following link to know more about this configuration properties.
http://help.sap.com/saphelp_nw70/helpdata/en/63/14f5b51a6eff429f2d8b2063400e82/frameset.htm
Thanks
R.Murali

Similar Messages

How to configure sendmail to use multiple LDAP servers ?

Hi everybody!
I have a sendmail running on Solaris 10 and a LDAP server(192.168.1.9) also running Solaris 10 OS. I have configured the sendmail the following way:
bash-3.00# ldapclient list
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=email,dc=reso,dc=ru
NS_LDAP_BINDPASSWD= {NS1}*********************
NS_LDAP_SERVERS= 192.168.1.9
NS_LDAP_SEARCH_BASEDN= dc=email,dc=domain,dc=ru
NS_LDAP_AUTH= simple
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= sub
NS_LDAP_SEARCH_TIME= 30
NS_LDAP_CACHETTL= 43200
NS_LDAP_PROFILE= default
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_BIND_TIME= 10
I also have another LDAP server (IP 192.168.1.10). It is configured as a replicant of the 192.168.1.9 LDAP server.
The question is how can i configure sendmail to use both LDAP servers ?
The man pages explain how to configure ldapclient to use ONE server and what if want to use two or more? All the settings and the profiles the same.
Thanks in advance =))

Hi!
To add LDAP servers to the Solaris ldapclient, you might use the ldapclient command:
ldapclient manual -v -a defaultServerList="servera.yourdomain.com serverb.yourdomain.com"
But this is only failover, AFAIK the Solaris ldapclient does not perform loadbalancing by itself.
But I am not sure about your sendmail programm. Normally, sendmail has its own configuration
and can be configured to use LDAP e.g. for aliases etc.
Regards!
Rainer

How to configure Firefox to use OpenVPN?

summary: I'm running OpenVPN from a Debian client through a Debian jumpbox/server. After I [start the server, start the client] most IP-based applications (DNS, ping, ssh) seem to work from the client, but client's Firefox cannot connect to http://www.whatismyip.com/ (or any other URI). How to configure Firefox to use the VPN? or otherwise fix the problem? or further debug it?
details:
I have a laptop running debian_version==jessie/sid with Firefox version=33.0 which needs to access a compute cluster. The cluster formerly required only an SSL VPN (enabled by a Firefox plugin) to access, but now has several additional requirements, which I seek to satisfy by running the SSL VPN through a jumpbox running an OpenVPN server. The jumpbox is running a "vanilla" Debian 7.7.
I have been using the laptop successfully for a few years without network problems. Currently I have the laptop connected by wire directly to an ISP-supplied modem/router. With `openvpn` NOT running on the laptop, I see:
* `ifconfig` shows no entry='tun0' (just "the usual" entries for 'eth0', 'lo', 'wlan0'), and shows the expected client IP# bound to 'eth0'.
* I can `ping` my jumpbox/server using its real IP#, but cannot `ping 10.8.0.1`
* I can `ssh` to my jumpbox/server using its real IP#, but cannot `ssh 10.8.0.1`
* `nslookup www.whatismyip.com` gives correct results
* browsing to http://www.whatismyip.com/ shows my client's IP# (as also shown in `ifconfig`)
Both my client/laptop and server/jumpbox setups are quite generic OpenVPN-wise, and are almost exactly as described on the Debian wiki
https://wiki.debian.org/openvpn%20for%20server%20and%20client
me@jumpbox:~$ date ; cat /etc/openvpn/server.conf
Sat Nov 8 16:49:00 EST 2014
port 1194
proto udp
dev tun
ca /etc/openvpn/ca.crt
cert /etc/openvpn/server.crt
key /etc/openvpn/server.key
dh /etc/openvpn/dh1024.pem
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS 8.8.8.8" # google public DNS
keepalive 10 120
comp-lzo
user nobody
group nogroup
persist-key
persist-tun
status openvpn-status.log
verb 3
me@laptop:~$ date ; cat /etc/openvpn/client1.conf
Sat Nov 8 16:51:31 EST 2014
client
dev tun
proto udp
remote ser.ver.IP.num 1194
resolv-retry infinite
nobind
user nobody
group nogroup
persist-key
persist-tun
mute-replay-warnings
ca /etc/openvpn/ca.crt
cert /etc/openvpn/client1.crt
key /etc/openvpn/client1.key
ns-cert-type server
comp-lzo
verb 3
up /etc/openvpn/update-resolv-conf
down /etc/openvpn/update-resolv-conf
My jumpbox/server firewall is currently set to forward everything, using `iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE`:
me@jumpbox:~$ date ; sudo iptables -L
Sat Nov 8 16:42:06 EST 2014
Chain INPUT (policy ACCEPT)
target prot opt source destination
fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain fail2ban-ssh (1 references)
target prot opt source destination
RETURN all -- anywhere anywhere
After I start `openvpn` on first the server and then the client, I see no OpenVPN errors on either the server or the client:
me@jumpbox:~$ sudo openvpn --script-security 2 --config /etc/openvpn/server.conf &
Sat Nov 8 17:48:25 2014 OpenVPN 2.2.1 x86_64-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jun 18 2013
Sat Nov 8 17:48:25 2014 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sat Nov 8 17:48:25 2014 Diffie-Hellman initialized with 1024 bit key
Sat Nov 8 17:48:25 2014 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Sat Nov 8 17:48:25 2014 Socket Buffers: R=[212992->131072] S=[212992->131072]
Sat Nov 8 17:48:25 2014 ROUTE default_gateway=ser.ver.gate.way
Sat Nov 8 17:48:25 2014 TUN/TAP device tun0 opened
Sat Nov 8 17:48:25 2014 TUN/TAP TX queue length set to 100
Sat Nov 8 17:48:25 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Nov 8 17:48:25 2014 /sbin/ifconfig tun0 10.8.0.1 pointopoint 10.8.0.2 mtu 1500
Sat Nov 8 17:48:25 2014 /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.2
Sat Nov 8 17:48:25 2014 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Sat Nov 8 17:48:25 2014 GID set to nogroup
Sat Nov 8 17:48:25 2014 UID set to nobody
Sat Nov 8 17:48:25 2014 UDPv4 link local (bound): [undef]
Sat Nov 8 17:48:25 2014 UDPv4 link remote: [undef]
Sat Nov 8 17:48:25 2014 MULTI: multi_init called, r=256 v=256
Sat Nov 8 17:48:25 2014 IFCONFIG POOL: base=10.8.0.4 size=62, ipv6=0
Sat Nov 8 17:48:25 2014 ifconfig_pool_read(), in='TomRoche,10.8.0.4', TODO: IPv6
Sat Nov 8 17:48:25 2014 succeeded -> ifconfig_pool_set()
Sat Nov 8 17:48:25 2014 IFCONFIG POOL LIST
Sat Nov 8 17:48:25 2014 TomRoche,10.8.0.4
Sat Nov 8 17:48:25 2014 Initialization Sequence Completed
me@laptop:~$ sudo openvpn --script-security 2 --config /etc/openvpn/client1.conf &
Sat Nov 8 17:49:12 2014 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sat Nov 8 17:49:12 2014 Socket Buffers: R=[212992->131072] S=[212992->131072]
Sat Nov 8 17:49:12 2014 NOTE: UID/GID downgrade will be delayed because of --client, --pull, or --up-delay
Sat Nov 8 17:49:12 2014 UDPv4 link local: [undef]
Sat Nov 8 17:49:12 2014 UDPv4 link remote: [AF_INET]jump.box.IP.num:1194
Sat Nov 8 17:49:12 2014 TLS: Initial packet from [AF_INET]jump.box.IP.num:1194, sid=25df7af6 0ece4089
Sat Nov 8 17:49:13 2014 VERIFY OK: depth=1, <my config data/>
Sat Nov 8 17:49:13 2014 VERIFY OK: nsCertType=SERVER
Sat Nov 8 17:49:13 2014 VERIFY OK: depth=0, <my config data/>
Sat Nov 8 17:49:14 2014 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Nov 8 17:49:14 2014 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Nov 8 17:49:14 2014 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Nov 8 17:49:14 2014 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Nov 8 17:49:14 2014 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Sat Nov 8 17:49:14 2014 [TomRoche] Peer Connection Initiated with [AF_INET]jump.box.IP.num:1194
Sat Nov 8 17:49:16 2014 SENT CONTROL [TomRoche]: 'PUSH_REQUEST' (status=1)
Sat Nov 8 17:49:16 2014 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 8.8.8.8,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5'
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: timers and/or timeouts modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: --ifconfig/up options modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: route options modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Sat Nov 8 17:49:16 2014 ROUTE_GATEWAY lap.top.gate.way/255.255.255.0 IFACE=eth0 HWADDR=la:pt:op:MAC:ad:dr
Sat Nov 8 17:49:16 2014 TUN/TAP device tun0 opened
Sat Nov 8 17:49:16 2014 TUN/TAP TX queue length set to 100
Sat Nov 8 17:49:16 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Nov 8 17:49:16 2014 /sbin/ip link set dev tun0 up mtu 1500
Sat Nov 8 17:49:16 2014 /sbin/ip addr add dev tun0 local 10.8.0.6 peer 10.8.0.5
Sat Nov 8 17:49:16 2014 /etc/openvpn/update-resolv-conf tun0 1500 1542 10.8.0.6 10.8.0.5 init
dhcp-option DNS 8.8.8.8
Sat Nov 8 17:49:16 2014 /sbin/ip route add lap.top.IP.num/32 via lap.top.gate.way
Sat Nov 8 17:49:16 2014 /sbin/ip route add 0.0.0.0/1 via 10.8.0.5
Sat Nov 8 17:49:16 2014 /sbin/ip route add 128.0.0.0/1 via 10.8.0.5
Sat Nov 8 17:49:16 2014 /sbin/ip route add 10.8.0.1/32 via 10.8.0.5
Sat Nov 8 17:49:16 2014 GID set to nogroup
Sat Nov 8 17:49:16 2014 UID set to nobody
Sat Nov 8 17:49:16 2014 Initialization Sequence Completed
I then see the following on my client:
* `ifconfig` shows a new entry=`tun0`, which looks correct
* I can `ping` the server using either its real IP# or `10.8.0.1`
* I can `ssh` to the server using either its real IP# or `10.8.0.1`
* `nslookup www.whatismyip.com` gives correct results
... but I get no connection if I open a new instance of Firefox and browse to http://www.whatismyip.com/ :-( "Looking up www.whatismyip.com..." succeeds quickly but the status line continues to display "Connecting to www.whatismyip.com..." until the attempt times out. I also get the same behavior (connection timeout) if I open a new instance of Chrome, or if I browse to http://www.whatismyip.com/ with a Firefox opened prior to starting OpenVPN. FWIW I get the same behavior browsing to any URI, including (e.g.) Google.
This is a major problem for me! For the SSL VPN to work, I need to start a Firefox and run it (since the SSL VPN's vendor only supports it on Linux via a Firefox plugin) to access a particular remote-access website. Furthermore I need the SSL VPN to run through the jumpbox/OpenVPN. (Don't ask, it's a long, sad story ...)
Is there something I must do to configure Firefox to use the VPN? Or is there some other way to fix this?
Alternatively, what should I do to further debug the problem? It just seems odd to me that the other services work (e.g., `nslookup`, `ssh`) but Firefox does not. That being said, both Firefox and Chrome fail in this usecase, so the problem might be generic to web browsers.
your assistance is appreciated, Tom Roche <[email protected]>

You're kidding. You have to go through that rigamarole just to put your bookmarks on your own server? Where's the simple FTP option?
Also, the above-linked article has a broken link. The link to the weaveserver (which is what you have to set up on your own server) is no good, and there is no obvious replacement. There are plenty of Weave-related repositories here:
http://hg.mozilla.org/labs
but it's not clear what you need.

How to configure sap to use gmail as smtp server?

Hi experts,
I need to know how to configure gmail as my smtp server. In the scot transaction I don't see anywhere where to specify whether it is a ssh connection, ports for secure smtp, username, password.
Does anyone know how to configure sap to use gmail as the smtp server?
I've seen some similar threads about this, but they are of no help. Although they are classified as answered, in most cases the reason they are answered is because the person who made the query dropped the cause trying to make it work. I'd like to know for sure is this is possible or not.

Hi Camilo,
You can't set up gmail as your smtp server to handle this. gmail is an email server which generally are based on POP protocol. now for SAP to send mail to gmail, you would need one SMTP capable server which can relay those message received from SAP to configured email address.
As of WAS 6.10 SAP kernel supports SMTP without more components. i.e e-mails can be sent (or received) from the SAP system to each SMTP-compatible mail server. see SAP note 455140 for more details.
Hope this clarifies your doubt.
http://en.wikipedia.org/wiki/SMTP_server
Regards,
Debasis.

How to configure router to use ip pool on the aaa server for vpn clients

how to configure router to use ip pool on the aaa server for vpn clients . i want to use vpn clients to connect to the router. authenticate using the aaa server username databse and also use the ip pool cretaed on the aaa server. i am not able to find the command on the router pointing to use the pool created on the aaa server. can u some one help me with this command.
sebastan

Hello Sebastan,
what do you use as AAA server (e.g. ACS with TACACS+ or RADIUS) ?
Regards,
GNT

How to only synchronize one specific LDAP user group with SAP?

Hi,
Hopefully this is the correct forum to post this in. I want to have continuous one-way synchronization of users from my LDAP server to my SAP central system. I've started configure in SAP using transaction SM59 and LDAP. Can I somewhere set that only one specific LDAP user group shall be transferred to SAP (they do not need to be assigned to any specific group, profile, role in SAP) - or should this be done on the LDAP server side (or is it at all possible)?
Correct me if I'm wrong, but the User Group field in the report RSLDAPSYNC_USER only concerns SAP user groups right? This would therefore not be sufficient since I want to select the users to synchronize based on user groups in the directory.
Thanks, Oscar

We've used a repository constant to specify the LDAP filter for reading users / groups from the LDAP target.
E.g. LDAP_FILTER_USERS (&(objectCategory=person)(objectClass=user))
Then we also have a constant for the LDAP_STARTING_POINT
For our AD Group Initial Load we filter according to these settings:
LDAP_FILTER_GROUPS = (objectclass=group)
LDAP_STARTING_POINT_GROUPS = ou=IDMManagedGroups,ou=Groups,dc=cfstest,dc=le,dc=ac,dc=uk
The above example only reads AD groups starting at the specified OU
Then in a Job From LDAP Pass the LDAP URL looks like this:
LDAP://%$rep.LDAP_HOST%:%$rep.LDAP_PORT%/%$rep.LDAP_STARTING_POINT_GROUPS%?*?SUB?%$rep.LDAP_FILTER_GROUPS%
I hope this helps
Paul

HOW-TO specify database credentials in LDAP user

Hi:
I want to know how can i specify oracle database credentials (oracle database usernname) that one specific user will use to connect to the database for instance when using Oracle Forms.
I saw in OID some "tags" like orcluserv1, etc... is this ? how can i do it ?
For instance i want that:
LDAP user Database user
user00001 dbuserA
user00002 dbuserA
user00003 dbuserA
user00004 dbuserB
user00005 dbuserB
So ldap user00001 will connect to the database with dbuserA ..
Thanks in advance,
Ricardo

Hi Ashish:
I've succesfully created an user with OIDDAS and assign it a "resource acess information" of type OracleDB.
So, when creating this user i specified the username in db that this user will use to access database. Until now, it's all perfect. But, where's this information is stored ?
I've access OID Manager and see that user is create in the Entry Management, but the DB information is not stored in any of the properties of this user.
This is a problem, because I want to make an APP that will use DBMS_LDAP pack to create user dynamically, so I have to know what attributes/classes/properties that user needs for assign it to a specific DB user.
Can you help ?
Thanks The information is stored in an Oracle Specific container called 'cn=oracleContext' in the default subscriber.
You can use the DBMS_LDAP_UTL package (shipped in iAS 902) to query these Resource Access Descriptors. Directly
storing these from PL/SQL is not presently supported. OIDDAS is the only interface through which you can get this done.

How to get Request object and LDAP user

Hi All,
How to get Request object, coz i want to see the out put of this code
IUser myUser = request.getUser();
String uid=myUser.getUid();
I want to get only LDAP user from the server, for that i am having code but i think this code is returning me all user from the server.
com.sap.security.api.IUser user = null;
try {
      IUserFactory userFactory = UMFactory.getUserFactory();
     IUserSearchFilter searchFilter = userFactory.getUserSearchFilter();
ISearchResult searchResult = userFactory.searchUsers(searchFilter);
   int count = 0;
    List list = new ArrayList();
     while (searchResult.hasNext()) {
                  count++;
                   String uniqueid = (String) searchResult.next();
                    user = userFactory.getUser(uniqueid);
                    list.add(user.getUniqueName());
This code is giving me all user from the server LDAP and as well as portal user.
But i want only LDAP.
Please help me out. It's urgent.
Regards,
Deepak

Hi
use the following code
//Request
IWDRequest = WDProtocolAdapter.getProtocolAdapter().getRequestObject();
//User
IWDClientUser = WDClientUser.getCurrentUser();
Regards
Ayyapparaj

How to configure traps when using snmpv3 for Airwave and controller communication

Requirement:
Airwave monitoring or managing controllers, using SNMPv3 for communication.
Solution:
Usage of SNMP v3 for communication over SNMP V2c is increasing rapidly for its enhanced security. Like wise, SNMP v3 informs are also more secured compare to SNMP v2c traps.
SNMP v3 informs work differently, when compared to SNMP v2c traps. As, informs would need a received receipt from the trap receiver. Therefore it requires more configuration from Airwave side as well.
Configuration:
We need to configure the SNMP v3 inform user on Airwave, under device setup --> communication as shown below:
We need to use the same user name to configure on the controller as well, as shown below:
Controller GUI > Configuration > under management > SNMP > Trap recievers:
Verification
After the configuration, we could see the traps(Informs) showing on the Airwave GUI, System --> Syslogs & Traps, as shown below:
We could also see in the packet capture taken from Airwave, that the controller is sending the Traps and Airwave is Acknowledging them as shown below:
In the above example, .116 is the Airwave IP and .231 is the controller IP.

My first question is how to create Sync-Async bridge in XI without using BPM.
Just make a search on SDN, there is blog which mentiones how to do Sync_Async bridge without BPM (for JMS)
"how to route this Interface mapping in Integration directory as in this case there is no backend call....its just the Java
mapping inside an Interface mapping"
Include the Interface mapping in the appropriate Interface Determination in ID for a particular set of source and target.
and third I m trying to call an IDOC which is populated with the response of the Java mapping....but how to route it in
Integration Directory ??
same as mentioned for Q2....in Interface Determination....if it is a Sync call then the Request & Response Mapping will be in same Interface Mapping and then in same Interface Determination......it is the normal way.....I hope that i have not missed/ overlooked something from your queries!
Regards,
Abhishek.

How to configure memory snapshots used in /HMUSA?

Dear experts,
Does anybody know how to configure memory snapshots? I want to call the /HMUSA and have a look at the snapshot using the Memory Inspector. But I would like to get a itemized list of the memory used, for example for the TTAB buffer I would like to know which process or transaction has used certain amount of memory in this buffer. Thanks in advance.
PS: I am using a system for test purpose and I am the only one using this system (it's not a system used in a real company, and I have an administrator account).

Hi Sam,
Please review the following note, as it might help you!!!
Tuning Output Post Processor (OPP) to Improve Performance (Doc ID 1399454.1)
R12: How to Configure the Account Analysis Report for Large Reports (Doc ID 737311.1)
Thanks &
Best Regards,

How to get to learn using TestStand User Interfaces

I am starting to work with TestStand and I was looking into using the User Interface. I know that a couple of examples are provided and that there is a couple of sections of literature on the subject, but there does not appear to be a very helpful (get started from scratch) type of documentation that I can find. Does such a thing exist? If not, what is the best way to get started?
Solved!
Go to Solution.

You can currently do this in the Full-Featured UI without any modifications. It's kind of a hack though:
So assume that an execution is running. The user clicks the Break button and wants to rerun a step with different parameters. So now your execution is paused somewhere below the step. Right click the step and select: Set Next Step to Cursor. Now in the Variable window look for the variable that is being passed as a parameter to that step. Say for instance Locals.Foo is being passed to your VI. Change the value of it and click the Resume button. This also assumes that you are passing either Locals or FileGlobals to your VI. You may have to have Administrator privileges to do this.
If this isn't good enough then there are ways to accomplish what you want in a cleaner manner.
One way is to build your sequence file such that if a certain condition occurs then retry with new values or values from a file which can be changed by the user. This is what I would recommend because it will be the cleanest and the easiest.
Another way is to build into your UI like you are asking about. The problem with this is at a certain point the user will click Break or a Stop button that you have put on there. This will stop the execution at some point (who knows exactly what point unless you write code to specify a point). Then they would have a pop up or something that would allow them to select a step. Then for each step you'll have to have some code or a parser or something that will determine the parameters and valid values they can be and ask the user for those. This is all doable but would be quite a task. You will have a long ways to go in understanding the TestStand API in order to accomplish this. In fact there would be so many API calls with numerous ways to attack this problem.
Whichever way you choose to go you will always have the TestStand forums or NI support.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

How to find the Tcodes used by user

Hi
Can anybody help me to find out the way to check which t.codes or programmes one user had run till his last logon.
Regards
Manvir

Hi,
You can also find in st03n.
1. Open st03n --> expert mode
2. Double click on the period(today,week/month) to find the tcodes used by the user in that period.
3. Now expert dialog mode will be displayed in the left corner. Please select transaction profile
4. Double click on the same, you will find the all the results in right side dialog. click on find and enter user name.
5. Now again double click on the user. You can see all the transactions used by user.
Regards,
Gowrinadh

How to configure human workflow using embedded ldap in standalone weblogic

I am trying to use embedded ldap to select users for a human workflow. I have created an application server instance using soa server details but the realm field in human workflow remains empty.
Please let me know what would be right steps.

Can you provide more details about the context of where this happens? Are you selecting users in the Organization editor in BPM studio? Is this on 11.1.1.3 or 11.1.1.4?

How to configure LR2 to use all installed RAM?

Hoping to find some answers here about a problem I'm having with Lightroom 2.7. First let me give you some details about the computer I'm running LR on.
PowerMac G5 1.8Ghz single PowerPC CPU
8 Gb RAM
Mac OS X 10.5.8
Lightroom 2.7
Photoshop CS4
The OS acknowledges that there is 8 Gb of RAM installed, but in Photoshop, I am unable to assign any more than 3072Mb of RAM as that's all that's being seen by PS as "available". I can't find a configuration in LR to adjust how much RAM the software can be assigned.
I was looking around for a fix on this yesterday and saw a mentioning of running the software in 64-bit mode, but I am unable to find where that is enabled/disabled. Can anyone steer me in the direction I need to go or am I just S.O.L and bought a bunch of RAM I can't use in Photoshop and Lightroom like I bought it for?
Thanks.

I expected this, actually. The version of OS X that ran on most G5s was not "64-bit clean." Meaning, only some aspects of the system were 64-bit, but it was not complete from user app to kernel. So you don't get full advantage of 64-bit.
Lr can see 4Gb of address space and use that. It will request as much or as little of that as it requires. Since you have so much physical memory it can do this without causing the rest of the system to swap.

How can configure weblogic for use Hibernate

Hello everybody, my question is how can I configureit weblogic for use hibernate.
I'm using JDeveloper 11g but I did not show any error when I run my jsp page, the page shows me all, but it is as if it never made the connection. the data of my table are empty.
Thanks for your answers.

thanks for answer. The jar was wrong, now I get not error, but also does not show me anything on my board ADF. seems to not connect. this is what I get in your log JDeveloper:
C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\Middleware\jdeveloper\modules\features\adf.share_11.1.1.jar;;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\Intel\DMIX;C:\Archivos de programa\Java\jdk1.6.0\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xmx512m -Djbo.34010=false -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1 -Doracle.home=C:\Oracle\Middleware\jdeveloper -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1\config\oracle\jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<06-02-2009 10:50:27 AM VET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\antlr-2.7.6.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\asm.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\cglib-2.1.3.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\commons-collections-3.2.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\commons-logging-1.0.4.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\dom4j-1.6.1.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\hibernate3.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jdom.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jta.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jtds-1.2.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\log4j-1.2.14.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\mysql-connector-java-3.1.7-bin.jar;C:\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<06-02-2009 10:50:28 AM VET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<06-02-2009 10:50:28 AM VET> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008
WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008
WebLogic Server Temporary Patch for CR381265 Wed Oct 08 10:15:58 PDT 2008
WebLogic Server Temporary Patch for CR380913 Wed Oct 15 13:24:22 PDT 2008
WebLogic Server Temporary Patch for CR381739 Tue Oct 21 14:06:14 IST 2008
WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<06-02-2009 10:50:29 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<06-02-2009 10:50:29 AM VET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<06-02-2009 10:50:29 AM VET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<06-02-2009 10:50:32 AM VET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<06-02-2009 10:50:36 AM VET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<06-02-2009 10:50:36 AM VET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<06-02-2009 10:50:37 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<06-02-2009 10:50:37 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<06-02-2009 10:50:38 AM VET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "FAMILIA_KAWAIDA.mshome.net", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
<06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "FAMILIA_KAWAIDA", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
<06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "localhost", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
<06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 201.222.105.26:7101 for protocols iiop, t3, ldap, snmp, http.>
<06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 16953 ms.
DefaultServer started.
[Running application TVB on Server Instance DefaultServer...]
---- Deployment started. ---- Feb 6, 2009 10:50:43 AM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2009-02-06 10:50:43.64: Writing WAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB\TVB-TVB-webapp
2009-02-06 10:50:43.687: Wrote WAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB\TVB-TVB-webapp
2009-02-06 10:50:43.906: Writing EAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB
2009-02-06 10:50:43.921: Wrote EAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB
Deploying Application...
<06-02-2009 10:50:47 AM VET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application TVB is not versioned.>
06-02-2009 10:50:47 AM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
ADF Library non-OC4J post-deployment (millis): 16
06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
ADVERTENCIA: A duplicate definition for the feature "AdfDvtGraph" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
ADVERTENCIA: A duplicate definition for the feature "AdfDvtGauge" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
ADVERTENCIA: A duplicate definition for the feature "AdfRichPivotTable" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
Application Deployed Successfully.
Elapsed time for deployment: 26 seconds
---- Deployment finished. ---- Feb 6, 2009 10:51:09 AM
Run startup time: 26766 ms.
[Application TVB deployed to Server Instance DefaultServer]
Target URL -- http://127.0.0.1:7101/TVB-TVB-context-root/faces/seguridad/grupo.jspx
06-02-2009 10:51:17 AM oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImpl setLifecycleContextBuilder
ADVERTENCIA: ADFc: Sustituyendo la implementación del ciclo de vida de la página de ADF por 'oracle.adfinternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
06-02-2009 10:51:17 AM oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass
INFO: Marco portátil JMX inicializado con el SPI de plataforma "class oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl"
06-02-2009 10:51:17 AM oracle.adfinternal.controller.util.model.AdfmInterface initialize
INFO: ADFc: BindingContext está presente, utilizando las API de ADFm para DataControlFrames.
06-02-2009 10:51:17 AM oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider <init>
INFO: ADFc: Almacenamiento de recursos de metadatos de MDS en la caché del controlador ACTIVADO.
06-02-2009 10:51:17 AM oracle.adf.controller.internal.metadata.MetadataService$Bootstrap add
INFO: ADFc: Cargando metadatos de inicialización de '/WEB-INF/adfc-config.xml'.
thanks in advance for your response.

How to configure EP7 to use LDAP users?

Similar Messages

Maybe you are looking for