How to configure Internet connection?

I've just installed Solaris 10 x86.
It did not detect and configure the ethernet card, which is connected to a DSL router. How do I set this LAN?

You need to identify the ethernet card. The name of the device depends on the type of card. Once you have the name of the device you can use the ifconfig (see man pages) to configure it. Usually,
ifconfig devnam plumb
ifconfig devnam dhcp
will get the interface up and running from your router, then you will need to add the domain name servers to
/etc/resolv.conf
and
copy /etc/nsswitch.dns to /etc/nsswitch.conf
to get the naming services working.
It may be neccessary to add a default route to your router using something like
route add default 192.168.0.1

Similar Messages

How to Configure internet channel to a relay SMTP server

Hi men,
My problem is How to Configure internet channel(or outbound mail) sending to a relay SMTP server. I want to test my spam software.
I have search and read Sun Messaging Administration document but haven't fought the guide.
./imsimta version
Sun Java(tm) System Messaging Server 7.0-0.04 32bit (built Jun 20 2008)
Thank and Regards,
Duc Tien.

tien86 wrote:
My problem is How to Configure internet channel(or outbound mail) sending to a relay SMTP server. I want to test my spam software. You can use the daemon channel keyword with the tcp_local channel e.g.
! tcp_local
tcp_local smtp nomx multiple remotehost inner switchchannel identnonenumeric \
pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth loopcheck \
daemon relay.yourdomain.com
tcp-daemonIf the relay SMTP server only has an A record then use "nomx" instead of "mx".
http://msg.wikidoc.info/index.php/Mx%2C_nomx%2C_nodns%2C_defaultmx%2C_randommx%2C_nonrandommx%2C_nameservers%2C_defaultnameservers_Channel_Options
The "multiple" keyword instead of "single_sys" helps performance by increasing the number of emails per connection when sending to a relay system.
http://msg.wikidoc.info/index.php/Multiple%2C_addrsperfile%2C_single%2C_single_sys_Channel_Options
Regards,
Shane.

How to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?

Hi, I would be very grateful if someone could tell me how to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?
The thing is that as I have a dynamic IP address, everytime I restart the internet connection my IP address changes. I sometimes need it to change, so I need to restart the connection. I don't know another way to restart the connection than restarting the whole Time Capsule.
Thanks!!
PD: the computer I use is Windows based, using the Airport Utility for Windows, but I also have a MacBook Pro I could use and an iPhone too.

The utility in windows is very like Mac so the screenshots are from Mac as I don't have windows available now.
How this works depends on the setup of the TC.. which you did not tell us.. you cannot change anything if you do not have the TC as the main router in the network.
So on the internet tab you need to share a public IP address.
On the next tab where you set IP address.
Click the renew IP address.
It might work.. and it might not.. the problem is you are not disconnecting the network.. sometimes the hard disconnection is required before the address will renew..
What about unplugging the WAN port.. then click renew the IP which will fail.. then plug the wan back in again.
In the end it is easier and faster to power cycle the TC.

Reg: How to Configure internet for solaris 10 in x86 32 bit

Hi,
I am new to Sun Solaris can any one help me detailed step of how to configure internet for standalone pc. Thanks in Advance
Thanx
MA

OK, the classical way:
Open a terminal.
Type
ifconfig -a
ifconfig -a plumb
ifconfig -a
Note the differences, it will plumb ALL available interfaces this way. So, now you can see, which device is your network card.
Then perform a
ifconfig <interface> unplumb
for all the newly interfaces (aka those, that were new in the last ifconfig -a output).
Then, the simple way:
cd /etc
vi hostname.<interface-driver-name>0 (example: hostname.rge0, the driver would be rge, the instance is 0, and rge0 would have been displayed as an available interface in the last ifconfig command). Add the name of the host into this file.
Then
vi /etc/inet/hosts
and add the pair of IP-address and hostname.
If needed:
vi /etc/inet/netmasks
if you have a sub-divided network, and you need a differenbt subnet mask...
Then:
vi /etc/defaultrouter
and add the name or ip-adress of the gateway... (name only, if you have that name also in the /etc/inet/hosts file!)
Also:
vi /etc/nodename
and add the name of your host into that file, so that the system knows, who it is... ;-)
And: For the DNS you can then add the infos into:
/etc/resolv.conf
For example:
nameserver 192.168.2.1
or some such...
Then, as the last but one step:
ls /etc/nsswitch.*
and:
cd /etc
cp nsswitch.<what you need> nsswitch.conf (should be .files here!)
And the reboot... ;-)
HTH!
Matthias
P.S.: There might be some GUI, but I'm an old-timer, so I prefer the command-line version of things...

How to configure informix connection pool in sun-one appserver 7

Hello,
Anybody knows , How to configure informix connection pool properties in sun-one appserver 7?
Thanks in advance.

Actually,it couldn't get some advice in here.But now,I known how to configure it,I expended 2 days to search and test it.Follow :
jdbc class:com.informix.jdbcx.IfxDataSource
serverName=(INFORMIXSERVER)
portNumber=1526(default)
IfxIFXHOST=(host ip)
databaseName=(your dbname)
user=(your username)
password=(your pwd)
attention:configure right transaction and userthreads in your informix sever
Hope helpful to someone!

How to configure Internet settings on Iphone 4, os 4.3

Hey I got replacement handset from apple store...But the problem is I lost my internet and mms settings ....How to configure internet and mms in os 4.3??Hey I got replacement handset from apple store...But the problem is I lost my internet and mms settings ....How to configure internet and mms in os 4.3??

There are none unless it's built in to the Skype app.

How to configure BT connection from PDA?

Hello :)
PDA cannot find the ActiveSync service, though Windows Mobile Device Center 6.1 is running, and COM port is configured appropriately.
PDA HTC P3300 Artemis-WinMob 5.0, USB Bluettoth adapter, last version 7.10.10
in IVT BlueSoleil works fine
Manual *"How to configure a connection from the PDA (Windows Mobile 6) to the Windows Mobile Device Center"* not help
Windows 7 64bit

My HTC Windows Mobile 6.1 phone (not your model) in combination with Windows7 x64 and Windows Mobile Device Center works just fine for me with Bluetooth stack v7.10.10 (T). Ensure that you use the suitable x64 bit version of the Windows Mobile Device Center.
Here are my links:
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
http://www.microsoft.com/downloads/details.aspx?FamilyId=4F68EB56-7825-43B2-AC89-2030ED98ED95&displaylang=en

Configure internet connection - how to use compute...

Hi All,
Just received a new Nokia phone with GPS and installed OVI suite.
I tried to figure out how to use my computer inter setting to get content for my phone (maps etc..).
The OVI suite doesn't detect my internet connection used on my computer but always tries to connect using my phone.
There exists the manual option but I don't know which setting to fill in: "access point", "user name" and password.
These seems like a very simple thing, but I didn't figure it out.
On my computer I have a LAN connection and wireless connection. Don't know why OVI suite doesn't detect these automatically.
Thanks for any suggestions.
Bart
ps: I already learned from my internet searches that OVI suite is no fun to use.

For any content other than Maps.. Download it on to your PC.. Then connect the phone to install it... For Maps... connect your phone to PC using the USB cable (PC Suite Mode).. Launch OVI Suite and go to Maps in its Menu. After some time the Phone will set up and when the OVI Suite connects to the Maps server you will see the list of countries.. Select the Maps you want and follow instruction on the screen.. It will be downloaded and installed on the phone in due time. It will not use the Phone internet but the PC's internet connection...
BTW which phone do you have ?
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

How to configure internet proxy for portlet builder

Hi All,
We have downloaded the portlet builder from developer.bea.com. But while trying
to access xmethods for adding web service, it can't access as the internet connection
is thru proxy.
Can anybody pls tell me how to configure the internet proxy with this portlet
builder ?
TIA,
Sudarson

Hi, I got the same problem...I try to configure a web service with Portal Builder
7.0 in Bea E-Business Control Center... But I can not proceed cause there is no
hint for a proxy... Have you found a solution?
"sudarson" <[email protected]> wrote:
>
Hi All,
We have downloaded the portlet builder from developer.bea.com. But while
trying
to access xmethods for adding web service, it can't access as the internet
connection
is thru proxy.
Can anybody pls tell me how to configure the internet proxy with this
portlet
builder ?
TIA,
Sudarson

How to share internet connection over wifi to an ethernet decive using airport express?

Hi i have a device that it can only be connected to the internet via ethernet in a diferent room (and far) where my primary internet connection is. I have my network configured like this: cable modem >>> connected via ethernet >>> to airport time capsule >>> connectes via wi fi >>> to airport express last generation "n" >>> connected via ethernet cable to device. The problem is that i'm not having internet conection in my ethernet connected device. Anyone know if I have to configure something in some special way or if i'm doing something wrong?
Thanks
Guido

It should work fine..
To figure this out, check if the Express is connected by wireless properly and getting an IP.. you will see that in airport utility.
Make sure you are set to either extend or join the wireless network. The Express should then pass an IP to the "device".
No luck start over.. reset everything to factory.
If the TC is older model use 7.6.1 firmware.. it works much better for extend wireless.
Use short names.. 2-20 characters no spaces and pure alphanumeric.
Then set the Express again in extend wireless mode.
It is pretty easy in v6 airport utility. Look at the posts from Bob Timmons on how to extend wireless.. he must have answered those question a thousand times in the last few years.
Here is one I did. https://discussions.apple.com/message/24161378#24161378

How to share Internet connection from Leopard to iPhone 3G?

Hi!
How do you share Internet connection from Leopard to iPhone 3G?
So far I've managed to create a network and I joined my iPhone to the network. But when I turn on Internet Sharing from Leopard, iPhone's Safari won't use the connection. It either starts to use EDGE/3G or says that it isn't connected to the Internet...
What went wrong?

I have managed to get it work, but only when I completely turn my desktop computer's firewall off. To do this, select the Security icon in System Preferences, then click the Firewall tab. Next, select the 'Allow all incoming connections' option. I wish there was a way to configure individual ports so that I didn't have to leave my firewall wide open, but I haven't figured out how to do that so far.

How share ADSL Internet connection to all machines without RRAS but using Windows Server DHCP and DNS

Hello!
I have this scenario on my small network with 10 PCs (connecting from outside to inside my network):
1) Modem with ADSL connection
2) Wireless Router with public IP on WAN interface
3) Switch
4) Server 2012 with DC/DHCP/DNS (with 2 NICs) and others servers/desktops machines
I want to share internet to servers and desktops.
I was able to share internet by 2 methods searching on google, but I am not satisfied with them:
First method - Using the Wireless Router and its DHCP Server
I turned on the DHCP inside the Wireless Router. All machines will get an IP and be able to go to Internet, but I don’t have the ability to control the DHCP and DNS in the router
how I would like to have, because the server DHCP and DNS must be turned off on Windows Server.
Second method - Using the Windows Server RRAS NAT, DHCP and DNS server
I have 2 NICs on the server:
NIC1 - CONNECTED TO SWITCH
IP: 192.168.1.1
MSK: 255.255.255.0
GTW:192.168.1.1
DNS:192.168.1.1
NIC2 - CONNECTED TO WIRELESS ROUTER
(the LAN IP of the wireless router is 172.16.0.1)
IP: 172.16.0.2
MSK: 255.255.0.0
GTW: 172.16.0.1
DNS: 172.16.0.1
After installing and setting the RRAS with NAT at the Server, the internet began to work on all machines but at some times the internet stop to load some
random webpages, and if you hit a couple of times the F5 button, the webpage open sometimes, but very, very slow.
I saw other people in foruns saying that RRAS is not very good, and could cause weird things at internet connection, so, now I think the internet is horrible
because of RRAS. After notice that internet is bad I tested it connecting a cable direct to the lan ports of the Wireless Router, and the internet works fast and perfect.
What is the best thing to do in my case to maintain Windows Server DHCP and DNS turned on and Internet be shared without loss of quality?
Thank you!

Hi,
please deploy according to this network topology. please turn off DHCP from router and use internal NAT function to share internet. Detailed configurations:
Router part:
LAN address: 192.168.1.1/24
DHCP part:
scope name : site name
address pool: 192.168.1.3-192.168.1.254
scope options:
router:192.168.1.1
DNS server:192.168.1.2
DNS part:
configure a forwarder to point to the public DNS address such as 8.8.8.8
with these settings, you can maintain Windows Server DHCP and DNS turned on and Internet be shared via hardware router.
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to set Internet connection in solaris for DataOne Service in India?

I am using a P4 system with Inter Board D945GTP and i have a internet connection from BSNL. I wold like to connect internet to Solaris express Developer Edition 2/07
Help me!
bye
P.Sathish Kumar

In India one need to configure pppoe for connecting BSNL DataONE broadband. So here is a reference quick guide to setup pppoe for BSNL DataONE
SUNW ppp packages should be already available for you. If you didn't install, you need the following packages. Install them from Solaris CD.
Packages
SUNWpppd - Solaris PPP Device Drivers.
SUNWpppdr - Solaris PPP configuration files.
SUNWpppdt - Solaris PPP Tunneling.
SUNWpppdu - Solaris PPP daemon and utilities.There will be a file myisp.tmpl in /etc/ppp/peers directory. Copy the file to a filename /etc/ppp/peers/bsnl
~# cp /etc/ppp/peers/myisp.tmpl /etc/ppp/peers/bsnl
Note the conventions used here
USERNAME       - is your BSNL id eg (userid)
PASSWORD       - provided by bsnl (*****)
INTERFACENAME - is your ethernet card name eg (bge0, hme0....) Edit /etc/ppp/peers/bsnl file using an editor. The uncommented section should look like the following:
Where INTERFACE should be your ethernet interface name and USERNAME is your broadband user name.
connect "/usr/bin/chat -f /etc/ppp/myisp-chat" # dial into ISP.<br>
sppptun
plugin pppoe.so
connect "/usr/lib/inet/pppoec INTERFACE"
user USERNAME           # my account name at my ISP
remotename bsnl # name of the ISP; for pap-secrets
noauth                  # do not authenticate the ISP's identity (client)
noipdefault             # assume no IP address; get it from ISP
defaultroute            # install default route; ISP is Internet gateway
updetach                # log errors and CONNECT string to invoker
noccp                   # ISP doesn't support free compressionNow there are two configuration files that needs to be updated.
/etc/ppp/pap-secrets
/etc/ppp/chap-secretsIn these two files add the entry as follows
USERNAME        bsnl    PASSWORDWhere USERNAME is your broadband username and PASSWORD is you broadband password. Your configuration is almost completed. Now for connecting:
#/usr/sbin/sppptun plumb pppoe INTERFACENAME
#/usr/sbin/sppptun plumb pppoed INTERFACENAME
#/usr/bin/pppd debug call bsnlYou need to specify dns server to resolve dns names. Create a file in /etc with name /etc/resolv.conf and copy the nameserver info. For example:
echo nameserver 61.1.96.71 > /etc/resolv.confNote: The IP specified here is BSNL nameserver. Please ask your BSNL operator for exact dns address. Or else you can use the opendns.com server IP.
cp /etc/nsswitch.dns /etc/nsswitch.conf Make a backup copy so that you can copy back when needed.
cp /etc/resolv.conf /etc/resolv.conf.bsnlIn case you are still not able to resolv dns name, check if dns/client service is running or not.
svcs -a | grep dns/clientIf not enable
svcadm enable dns/clientIf not online, try starting
svcadm restart dns/client
or
svcadm refresh dns/clientHere is a simple script that can help you for connecting after configuring PPPoE.
#!/usr/bin/bash
ifconfig bge0 plumb
pkill -9 pppd
/usr/sbin/sppptun plumb pppoe bge0
/usr/sbin/sppptun plumb pppoed bge0
sleep 5
/usr/bin/pppd debug call bsnl
echo nameserver 208.67.222.222 > /etc/resolv.conf
echo nameserver 208.67.220.220 >> /etc/resolv.conf
echo nameserver 61.1.96.71 >> /etc/resolv.conf
cp /etc/nsswitch.dns /etc/nsswitch.conf
svcadm restart dns/clientRegards
Britto

How to configure Internet over BT?

Hi,
I have bought a SonyEricsson m600i, and I'm trying have internet over bluetooth on my phone with a EP-2101\A1 (This comes with Toshiba 3.00 driver, I downloaded 4.00 driver - for XP SP2).
I don't know if anyone has the same setup of phone AND bt stack...
I have been trying almost every setting to make them connected, but I think, EP-2101 needs a NEW driver.
Please have a look at this picture: I can make COM connection, but I can't make a NETWORK connection (DISCONNECTED BT on the picture!!)between my things:
http://wolf.miki.hu/status.jpg
Does anyone have any idea how to establish NETWORK connection between my SE m600 and my EP2101\A1 BT?

Hello
If the paring between your PC and mobile phone is successfully you must add your mobile phone as new modem. This option you can find under Phone and modem options > Modems tab you can find it under Control Panel.
After that you must create new dial up connection and as modem choose your BT mobile phone. With right number you will be able to establish the connection and use it for Internet.
I have done this on this way for a long, long time. I hope that i didnt write something wrong. Please let me know if you will have success!
Good luck!!!

How to get internet connection from Airport Express to a PC?

I recently bought an Airport Express to get internet connection from my new MAC COMPUTER TO ANOTHER PC which is located in another room. For unknown reason, I could not get the other PC to work. Any idea how to fix it so that I can get internet connection for my PC? Many thanks for your expert assistance.

Currently, the Airport Express (not the Airport Express Extreme router) is acting as a base station via Ethernet to a cable modem.
I guess that it would be correct to assume that your new Mac can connect wirelessly to the AirPort Express base station, and access the Internet that way.
I am not sure if my 41/2 year old HP(Hewlect Packard) PC - (with AMD Athlon 64 3400 processor) which I am unable to get internet connection now is Wi-Fi capable.
You said "Prior to using the new Airport Express,I was using the Linksys wireless G router and have a wireless adapter sitting on top of my PC.". The wireless adapter would be Wi-Fi certified (they normally are). Is it a USB adapter? Please post back with the exact model.
Question: do I still need to use the adapter or not? Or the new Airport Express is enough to send internet signal to the PC?
A Wi-Fi adapter would act as a wireless network card for a PC, and should communicate wirelessly with an AirPort Express base station without a problem (providing that the chosen security/encryption is supported on both sides). Since the wireless adapter apparently was OK (with the Linksys router), you should be able to continue using it. Any other (built-in) wireless capability ought to be externally visible at the PC as a PCI card with an antenna.
Does the (Windows?) PC operating system detect any wireless networks? Is your AirPort Express on this list (even if you cannot connect or access the Internet)?
Jan

How to configure Internet connection?

Similar Messages

Maybe you are looking for