How to configure stereo outs to mono via Mainstage?

I'm currently running Mainstage through my Presonus FireStudio Project. The outputs are linked together (i.e. 1-2, 3-4, 5-6), but i need to separate the stereo tracks into mono in order to run one track to monitors and a completely separate track to speakers. Also, when i select a track to go through a certain out like 1-2, it seems to not mean a thing because I can plug the speakers into any other out (like 3-4 or 5-6) and I still get signal. Why is this?

Ah! Thank you, Sir! It was so simple!
The applet control panel for my mixer had all the outputs linked!
Would you also happen to know if Mainstage can route certain tracks to solely the headphone jack in my AI? I'm using the Presonus FireStudio Project AI.

Similar Messages

How to configure header out put preview in Sales Order

Hi ,
i have couple of questions.....
1,How to configure header out put preview?
2.Step by step procedure to configure handling units
Points for right answer
Lekha

Hi,
You can use the FM ..RV_MESSAGE_UPDATE..
Thanks
Naren

How to configure group policy for emet via a command line

I have been tasked with installing emet on 50 servers that I only have access to with our patching server (so I can't remote in and open the gpedit gui). I can get it to install, but now the problem that I'm facing is I need to enable 6 of the group policies
for emet. Is there a way to do this while installing it? or a way to do it after the install?

cmd line you need to deal with is in the C:\Program Files (x86)\EMET 4.1 folder
specifically emet_conf --refresh would tell the systems to pull in the settings from a GPO they have already applied.
In a non - SCCM environment I would probably recommend using group policy preferences and create a task scheduler item on your servers that runs emet_conf --import
\\fileserver\settingsfile.xml on some sort of automated basis. Then you can just configure a client like you need and run the emet_conf --export
\\fileserver\settingsfile.xml whenever you need to change a mitigation etc and the clients will pick up on the change on their next run of the task scheduler item.
In general installing on servers isn't a great idea and is not the intended use case for emet however if you are DoD/Gov then DISA has mandated it so won't argue there. There's also the people that still have Internet access from servers so then it
would make sense in that environment as well.
CSS Security Support Engineer (FCS/MBSA/WUA/Incident Response/FOPE) Check out my blog http://blogs.technet.com/kfalde or better yet check out http://technet.com/wiki and start contributing :)

How to configure RFC

Dear Expert,
I have make a program in VB . Through VB when I connect SAP . My Login Pad comes.then I give user name & password . But its give RFC error and say check CPIC.
So please help me how I Configure RFC link in SAP via sm59 . Please tell me step by step.
So that I come in sap via my this VB program.
Thanks
manu

Hi Manu,
Here I am giving example of connection Non SAP ( Informatica system) to SAP system. For this,
You need to type logical system name in RFC destination field. You can give the logical system name of non-sap system in SAP thorugh tcode BD54.
Then You need to select the connection type. As it is non-sap it wont be R3.It will be T ( Start an external program via TCp/IP).
Also you need to register the program id filed in Informatica & select radio button regiatered server program
Hope this helps.

How to configure Time Capsule to add another 2GB of storage via USB External Hard Drive?

Hi All, I've recently added an external 2GB hard drive via USB to my 1GB Time Capsule as I had reached capacity. Time Capsule recognises the new 2GB hard drive so I know I have got that at least that bit right! But... I cant seem to figure out how to configure TC to add the extra 2GB to the current 1GB it already has for a total of 3GB? Under 'Select Disk' I can select either one or the other but I can't find a way to 'merge' them both. So a couple of questions:
- Is this even possible?
- If I have to keep them seperate, is there way to select different folders to back up to the different drives? E.g. back up all my music files to one of disk and all my movie files to another? I tried it but is seems like the options apply to time capsule regardless of the drive I select.
Any assistance you can provide would be most appreciated.
Regards, Justin

- Is this even possible?
Sorry, but no. You will not be able to combine the drives as one as the Time Capsule does not offer any type of RAID function.
- If I have to keep them seperate, is there way to select different folders to back up to the different drives? E.g. back up all my music files to one of disk and all my movie files to another? I tried it but is seems like the options apply to time capsule regardless of the drive I select.
Not directly with Time Machine (TM). You would need another backup solution, and then, run two separate backups (with the specific folders of interest); one on each HDD.

How to view 'stereo' vs 'mono' in GarageBand 10.0.2?

How to view 'stereo' vs 'mono' in GarageBand 10.0.2?
Thanks

Tjed wrote:
Could that have something to do with why I got no sound out of the external monitors (speaker)?
it's possible, if for instance the track was set to channel 1 (mono) and you were sending a signal on channel 2 (or any other channel your interface might offer), but you may want to start a new thread with this issue providing all background info for it

Need help. 2012 mac mini 5.1 digital audio not working only stereo out. How can I get 5.1 digital audio?

I have a 2012 mac mini with a mini toss link to toss link cable connected to an a/v reciever (Sunfire, grand theater 3) capable of dolby digital and dts. I am not getting 5.1 digital audio only stereo audio. Midi setup format 48000 hz 2ch-16 bit integer. In speaker configuration stereo is the only option all others are grayed out. How can I get this to work? Please help.

You should set up as 24bit integer. Toslink does not support
multi-channel encoded over a 16bit link. Just not enough
bits available.

How to find out logs related to which server, If i have 2 WFE's in the farm. How to configure logs path?

Hi,
I got this doubt, when searching logs on the servers. I have 2 WFE's in my farm, I got an error from enduser. So in which WFE server i need to check the logs.
How to configure logs path. Is it is possible to specify logs path on our own instead of 14 hive folder.
Badri

That is a really bad idea, especially with idle disconnects and other unreliability of CIFS.
You should instead check out the command
Merge-SPLogFiles which will allow you to combine ULS logs from multiple servers into a single file.
You can certainly specify your own path, but the path must be available on all servers. For example, if you specified D:\Logs, D:\Logs must exist on all SharePoint servers within the farm.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

Hello, since nobdy else has replied...
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

How to configure OCS mail to send out s

dear all,
i have OCS R2 on Linux AS. i can send send/recive emials localy but we need to start send/recive email outside the domian to send to hotmail, yahoo...etc.
i search alot and tried to configer the SMTP relay server but i am still not able to send emails outside domain
plz help me with the steps needed
regards

Hello,
Even i am facing the same problem as yours. I have no idea how to configure ocs to send mails out.Can you tell me if u got the solution . thank you

Stereo Out -mono/stereo - Input 1/2-

I've got a couple of projects open and just need some advice on something that I've just noticed.
On the channel strip it has.
Input 1
Stereo Out
Two independent columns
Mono circle
Okay, I thought that because the the mono circle is there, there would be one single fader gauge/column?
When I press the circle to get to get the double circle stereo, the gauge itself doesn't change, but stays the same. What changes is the Input 1 to Input 1 -2. I would have thought the gauge would change in accordance with whether it be mono or stereo? Or does the Input change from 1 to 1 -2, represent this?
Likewise, on another channel strip
Input 1-2
Stereo Out
Single column
Stereo double circle
When I click the double circles the gauge just stays as it is (single column) whether it be mono or stereo circles. the input changes from Input 1 (mono) to Input 1-2 (stereo).
I think I'm just confused by this.
Any help would be great help.

ekaton wrote:
I've got a couple of projects open and just need some advice on something that I've just noticed.
On the channel strip it has.
Input 1
Stereo Out
Two independent columns
Mono circle
Input 1, mono circle: the input is mono but "stereo" mono, signal in the middle.
Okay, I thought that because the the mono circle is there, there would be one single fader gauge/column?
No, only if the strip also has a mono output.
When I press the circle to get to get the double circle stereo, the gauge itself doesn't change, but stays the same. What changes is the Input 1 to Input 1 -2. I would have thought the gauge would change in accordance with whether it be mono or stereo? Or does the Input change from 1 to 1 -2, represent this?
No, it has to do with the complete signal flow. Mono in>mono out: single gauge. anything in, stereo out: double gauge.
Likewise, on another channel strip
Input 1-2
Stereo Out
Single column
Stereo double circle
When I click the double circles the gauge just stays as it is (single column) whether it be mono or stereo circles. the input changes from Input 1 (mono) to Input 1-2 (stereo).
I think I'm just confused by this.
That is because it is confusing. It would be Logical and Reasonable if the gauge doubled up in that scenario. The channel strip has no inserts on it?
Any help would be great help.
I am not sure if this is any help and therefore great help. I'll check out what I just said (I am not completely sure) in L9 later.

HT4259 how to configure extended network via ethernet

how to configure an extended network via ethernet

I assume that the Express is new, so that it still has the factory default settings.
Connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the AirPort Express
Power up the Extreme and Express if they are not already powered up
Open Macintosh HD > Applications > Utiltities > AirPort Utility
Click on the tab in the upper left hand corner of the window that reads Other AirPort Base Stations (1)
Click on the AirPort Express xxxxxx
Wait a minute or two while AirPort Utility analyzes the network and then announces that the Express will be configured to extend your network
Enter a name for the AirPort Express and click Next
Wait 2-3 minutes while AirPort Utility configures the Express and the Express restarts
When you see the message that setup is complete, click Done
That's it.

I just got a fc7 yamaha expression pedal and can't figure out how to configure it with mainstage or logic.

I just got a fc7 yamaha expression pedal and can't figure out how to configure it with mainstage or logic. I'm using a Gio pedal.

Hi
You will need to map the "Expression Pedal" to the Waa pedal. There are several ways you could do it, here's one:
In Layout Mode, add a Pedal Screen control, and Assign it to the in-coming MIDI from the GiO.
In Edit mode, select the Screen Control, and click the "Map Parameter" button. While this is active click on the Wah pedal in the PedalBoard plugin. Turn off 'Map Parameter".
CCT

How to configure canon ir 2250 to send scans to emails via exchange server 2010

Hello
I have one question:
How to configure canon ir 2250 to send scans to emails via exchange server 2010?

Hi,
Based on my research, the member limit of a distribution list depends on the scalability and performance of your environment:
http://blogs.technet.com/b/exchange/archive/2009/02/19/3407003.aspx
Thanks,
Angela Shi
TechNet Community Support

Went to use my contacts and they are all gone! Changed iCloud accounts on Saturday, performed a backup and then synced my music only on iTunes via a PC. How do I find out if my contacts were really stored on iCloud? If so, how do I get them back?

Went to use my contacts and they are all gone! Changed iCloud accounts on Saturday, performed a backup and then synced my music only on iTunes via a PC. How do I find out if my contacts were really stored on iCloud? If so, how do I get them back?

Log into icloud.com and then click on the Contacts icon. If the list is empty, then it's gone.

How to configure stereo outs to mono via Mainstage?

Similar Messages

Maybe you are looking for