How to connect hp j6450 to wireless

I CANT GET IT TO CONNECT WIRELESS AND IM NOT ABLE TO USE THE SCANNER ANY HELP WOULD BE GREATLY APPRECIATED THANKS
This question was solved.
View Solution.

What router?  What operating system?
To connect to the router, on the front of the printer: Setup > Network > Wireless Setup Wizard.  Once the printer is connected to the router (your wireless network), we can work on connecting your computer, whatever it is.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • How to connect my iPad to wireless dest 3511e all in one HP printer

    How to connect my wireless printer to my iPad HP dest jet 3511e all in one SN [Personal Information Removed]

    Hi Alicerief,
    Welcome to the HP Support Forums. I understand that you would like to know how to print from your iPad to your Deskjet 3511 printer.
    Your printer is AirPrint and ePrint capable so you should be able to use either method to print once your printer is connected to your wireless network. The instructions on connecting your printer to your wireless network can be found in your user guide. You can designate it as a wireless printer during the setup as detailed in the section "Traditional wireless connection" on page 32.  If you have already installed your printer onto your computer using a USB connection, the instructions to switch to a wireless connection can also be found on page 32 in the section titled "Change from a USB connection to a wireless network". 
    I have included several reference documents for you. The first one reviews printing from an Apple mobile device to your printer. I have also included the document on how to setup ePrint and customize the printer's ePrint email address. There are two mobile apps available from HP that will allow you to send print jobs to your printer, the HP ePrint mobile app and the HP All-in-One Printer Remote app. The AiO app will also allow you to scan from your printer to your iPad. I have included the FAQ documents for both apps.
    HP Deskjet 3510 e-All-in-One Series User Guide
    http://h10032.www1.hp.com/ctg/Manual/c03471705.pdf
    Printing from an Apple Mobile Device
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02796271
    Setting Up a Custom Email Address for ePrint
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02940150
    HP ePrint Mobile App FAQs
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01923321
    HP All-in-One Printer Remote Mobile App FAQs
    https://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03561640
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to connect via bluetooth with wireless printer

    how to connect my macbook pro via bluetooth with epson all in one wireless TX600FW

    Bluetooth between iOS devices and computers is only for Internet tethering, nothing else.
    See: http://support.apple.com/kb/ht3647

  • How to Connect Wii and Xbox360 wirelessly with SBC Home Portal

    Greetings. Need help on hardware to connect Wii and Xbox360 wirelessly to SBC Home portal modem.  Distance between connect points are about 50 feet plus and separated by floors and walls.  What would work to acheive the connection?  Thanks in advance for the help.
    Sparrky

    Configure the X-BOX & WII using the wireless connection same as in wireless router .....
    Check the connections status on both the devices & see if you are online or not ....

  • How to Connect a USB-to-Wireless printer to a Wireless Network without a PC

    Some printers from HP do not have a Wireless Setup Wizard built into the front panel for connecting to a network.  These models install to a computer through a USB connection and the software then sends the wireless information across the USB cable to the printer.  However, you may not always have a computer present and still need to connect these printers to a wireless network.  You can use a wireless device, such as an iPad, to do this.  For the example below I have used an iPad and a Deskjet 3510 series printer.
    The first step is to make sure your printer is broadcasting a network (Ad-Hoc).  To do this, turn the printer on and press the wireless button or turn wireless off, then on in the Setup menu. Connect the iPad (or other wireless device) to the wireless signal being broadcast by the printer.
    Once the iPad is connected to the printer as a network connection, open the Web Browser on the iPad.  Type 192.168.223.1 in the address bar and go to that site.  The printer's status page should load and look similar to the image below.
    Click on the Network tab at the top of the Status page.  You may get a prompt warning about being redirected to an HTTPS site.  Click Ok on the message box to continue.  When you click OK, you may get a warning regarding the certificate or server identity.  Select the option that lets you continue.  The wording will vary from browser to browser, but there should be an option to continue anyway.
    Network status page should now be loaded at this point.  Select Wireless Setup Wizard to start the wireless network setup and click Next.
     When next is selected, it should list the available wireless networks.  Select your network from this list and select next.  When the network is selected, it should be highlighted.
    Enter the network’s password, if any, and select next.
     A message should be received indicating the name and if security is enabled.  The message below that should indicate the settings were saved successfully.  If it says the settings were saved successfully with an error, the network setup is more than likely functioning.  Select Ok at the bottom.
    After selecting OK, select Status to verify the printer is connected successfully.  It may take a few minutes for the wireless light on the printer to stop flashing.  Once it is a solid blue, the printer should be on the network and functioning.
    Once this is completed, then you will be able to reconnect to your normal wireless signal (Wireless Router) for internet access.  Now both the iPad and printer are on the same Home Network.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.
    This question was solved.
    View Solution.

    Hope this helps.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • How to connect Photosmart C4795 to Wireless Network - Mac OSX 10.8.4

    I am desperately confused here!  When I bought the printer 2-ish years ago I was able to set it up and have it connected to my network no problem.  Since then I have moved and updated my OS to Mountain Lion and lost my installation CD.  As of now, this is where things stand.
    When I turned the printer on and connected it to my iMac via the USB cable, the computer found it and installed it with no issues.  I can print with no issues when the USB cable is plugged in.  
    Using the printers built in display, I have run the HP Network Configuration and the Wireless Network Test.  The printer can see my network, but it won't connect to it.  I have no bloody idea where I need to go to enter my network password so the printer can get online.  
    I've manually downloaded the HP Driver found at http://support.apple.com/kb/DL907  and that put the HP Utility on my computer (which was already there) but I don't see any place in the utility software that would let me enter my network password or even configure network settings for the printer. 
    My router is an Apple Airport Extreme, and the firmware is up to date.  Everything on my computer seems to be up to date.  I just cannot for the life of me figure out how to get this thing online.  Any help would be greatly appreciated =)

    Yup, there is no way to install your printer using OS X 10.8, sorry.
    However, there are alternatives.  Here is the easiest way:
    1. On the front of the printer: Setup [Scan] > Wireless > Restore Defaults.
    2. In the same Wireless menu, start WPS Pushbutton.
    3. On your Mac go to Applications > Utilities > Airport Utility.  Choose your Airport and click Edit.
    4. In the menu bar at the top of your screen go to Base Station > Add WPS Printer.
    5. Choose the FIrst Attempt mode, then Continue.
    Now your printer should be connected to your wireless network.  Next, go to System Prefs > Print & Scan, click the '+' sign to add your printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How to connect to ethernet and wireless on AirPort Time Capsule?

    New 2TB AirPort Time Capsule.  I have a Motorola SurfBoard modem (modem only).  The AirPort is replacing a Wireless N router.  The wireless setup was a breeze, but ethernet ports do not work when AirPort is configured for DHCP (or DHCP and NAT).  If I change it to Bridge all of my eNet devices work perfectly, but then I don't have wireless.  I could not find any documentation on how to configure this correctly.  I called Apple Care, but they were unable to help at all.  Apple Care told me to bring the AirPort back to the Apple store to test it.  Has anyone successfully setup the new AirPort Time Capsule to replace a wireless router?

    Hi,
    So about 24 hours after getting mine to work it suddenly stopped.
    None of the above resetting procedures worked.
    Then a really goofy thing happened. I was in AirPort Utility and I had just received the error message that the set up did not work as I was trying to hard reset everything and start over for the 3rd or 4th time.
    Just then my Wi-Fi only iPad chimed with an incoming text message. The time capsule was flashing amber which would indicate that it had not set up a network. AirPort Utility was showing that an unknown error had occurred and that I should try again. Despite this my iPad 2 was showing a good connection to the wireless network that I had tried to create in AirPort Utility but which it told me me had failed.
    I then clicked the wifi thing on the tool bar, it connected to my network and all was good.
    My 2 cents? This should still be in beta as Airport Utility and the new TC are not working as they should. I'm in 10.7.5 and 6.1.4 and the latest AU.

  • How to connect sony bravia tv wirelessly to internet using apple airport

    Hi. I cannot connect my Sony Bravia smart TV wirelessly to internet via my Apple Airport Extreme wireless setup. The TV status is network connection OK, but fails to connect to internet. Apple Laptop connects OK via wireless Can anyone help please.

    Hello chowpotluri, thank you for your message. Welcome to SONY Community!
    Follow these steps to access the YUPPTV app from the Internet Video menu:
    1. Using the supplied remote, press the Home button.
    2. Select Internet Video.
    NOTE: If the Internet Video option is missing, Select Refresh Internet Content from the Network section of the menu and repeat step one.
    3. Select YuppTV.
    NOTE: YuppTV requires a device registration. Follow the steps on the screen to register the account. Visit the YuppTVwebsite for account information and answers to usage questions.
    Hopefully this post helps you. 
     

  • How to connect Slingbox to AEBS wirelessly?

    I recently switched from a Netgear wireless router to the AEBS. We have a mixed network with both PC's and Mac's. The only issue I currently have with the AE is that I can't use the Slingbox. The Slingbox is not in the same room with the AE - I had connected to the old Netgear router with a Netgear wireless game adapter. The AEBS does not recognize the Netgear WGE111. The internet light just blinks. Netgear talked to Netgear but it isn't talking to Apple.
    I am using WPA. I am on Leopard.
    I have changed the AEBS to use the 192 range of IP's that Netgear likes. No joy.
    I've seen discussions here about connecting the Slingbox but not with a wireless adapter. If someone knows of a wireless adapter that the AE will let in the network, I'd like to know. The Netgear comes with configuration software, but unless I can connect to it, it's not very useful.
    Thanks for any suggestions.

    ... but the Netgear website implies it can be done with WPA.
    Here's the manufacturer's reference, I found, that says it doesn't: 54 MBPS WIRELESS GAME ADAPTER
    Did you find a different reference?

  • How to connect to optimum tv wirelessly

    my goal is for it to be free I don't want to buy some special wire or transmitter so I hope you can help i tryed optimum limk but it doesnt support mac

    my computer on my tv when i say free i mean i dont want to buy anything to make this prosses work
    I'm sorry there is no magic to make this work without some cables and adapters for a wired connection or a transmitter/receiver for a wireliss connection.  The only way this could ever possibly be free is if you already have the appropriate devices.  Otherwise nothing is free.
    If you decide on a wired connection  you need to specify  your video port is (mini-dvi, mini-diplayport/thunderbolt).  Then you need an adapter for that to HDMI.
    For wireless there McTiVia and Veebeam.

  • How to connect Apple TV to wireless network needing two passwords?

    The device will connect initially just fine, and I type in the first password and it connects. The issue with the network is that after typing in the initial password you need to open a web browser to type in a second password, kind of like some hotels require you to do. I read somewhere that you can call the internet provider and have them add your MAC/wifi address for your Apple TV straight into the network for connection, so my apartment manager called the internet provider to do so, but claims they won't do such a thing.
    Anyone have a different solution? Connection through a computer or external device? I don't have a clue what else could be possible since my computer/phone can see my Apple TV but the Apple TV can't see other devices because it's not actually connected to the internet. I'm out of options!
    Help is much appreciated, thank you!!!

    https://www.google.dk/search?client=opera&q=internet+sharing+in+osx&sourceid=ope ra&ie=UTF-8&oe=UTF-8
    it take a bit of skills and knowledge to setup
    so read up on it and give it a go
    or give up
    or ask somebody you know who got some skills to show you

  • How to connect epson workforce 610 wireless printer

    I had it printing one time, and somehow info got lost in settings Print and Scan. I thought I put back right info but now it doesn't print at all. Any info would help.

    Hello:
    Your printer is supported in OS X 10.8.  Read this article, I think it will help you:
    http://support.apple.com/kb/PH11143
    Barry

  • How to connect wifi panasonic tz40 camera to imac

    Does anyone know how to connect a lumix tz40 wirelessly to an iMac.

    No joy there.spent 3 hours talking to lumix  tech,then to apple.it is something to do with shared folders.lumix cannot find the shared folder,getting scraps of info around the net.it is obviously a problem as lumix has introduced firmware update for macs,but that does not work for me.
    Thanks anyway

  • How to connect my iphone to a wireless speaker

    how to connect my iphone to a wireless speaker logitech Z515

    Are you trying to connect over Bluetooth?
    Matt
    Message was edited by: Matthew Morgan

  • How to connect my i phone to wireless printer

    how to connect my i phone to wireless printer

    You would have to have one of the few HP printers that support airprint:
    iOS: AirPrint 101
    Or you could find an app that provides this feature.

Maybe you are looking for

  • Very urgent help - for update field1 nowait across databaselink

    Hi, We have a form that uses select for update field1 nowait for a table that is accessed across a database link. When we try to do this the form errors out giving frm-92101 error. If I comment out the for update statement then it works fine. I know

  • Newly-added field  missing in the field catalog  for NR00

    I  am about to creat condition record for condition type NR00 free goods . I need to make some customizing to meet our requirement .So  I changed  the field catalog for the condition table by adding a new field BWAST  (purchasing document type) . Aft

  • Convert the Flat file format to XSTRING.

    hi experts,                 I need to convert the flat file(.txt,.pdf....) to an internal table as the XSTRING.

  • Date formating in scripts

    hi experts, I want to print date in dd.mm.yyyy format in script. I have used SET DATE MASK command in script... But i am getting ddmmyyy format without any seperators. plz tell me what can be done. regards. sm

  • Pricing (VK) Services for Object

    Looking to add Services for Object to pricing transaction VK12. Is there an object specific to pricing? How can this be accomplished? I have read documentation on creating services for object for custom code, but this is a standard transaction so it