How to determin who/what set application status "UNAVAILABLE"?

Hello Experts,
I've had users reporting that Application is unavailable during normal business hours... Surely, when I've received those reports it was back to normal. Is it being logged anywhere who (user) or what (process) set an application status "UNAVALIABLE"?
From what I can tell, the only job was running during that time was a Data Auditing job (created by Manage Data Audit option).
I have also noticed that from time to time (when Auditing job is running) I receive the following error message trying to access Manage Data Audit:
"Job name : http://outlooksoft.kaplaninc.com/osoft/Admin/AuditAdmin.aspx
Detail : No accessible overloaded LogHandler.WriteLog can be called without a narrowing conversion. "
Eventually, the error goes away and I can access Data Audit page.
Thanks in advance for any info.
Akim

Audit is the one which can provide you the information what process was putting the appset offline.
You have to be aware that only the Admin processes are able to put the appset offline. And the admin processes are refering to entire appset not only for one application.
So usually this happen when an administrator was creating a copy of application or it is playing into another application just for test.
The bad thing it is that admin actions into that application is disturbing also the users using the applications from the same appset.
That's the reason because this should not happen into production environment.
Any Admin process for any application from an appset :
Process dimension,
Modify Application.
Full Optimize,
can make the appset to be offline.
So my expectation is that actually nobody is doing something wrong into your current application but you have an admin users doing tests into an application from the same appset and this is creating the application to be sometimes offline.
I hope this will help you.
Regards
Sorin Radulescu

Similar Messages

How to determine who is connected via AFP in WORKGROUP

I am running a WORKGROUP configuration leopard server on a MP early 2008. Using the server widget I can tell if there are users connected but I have not figured out how to determine Who is connected and how to contact them if I want to reboot the server. Moreover, how do I determine what users are doing? The AFP log is turned off in this config and I can't get it to come on. From the command line I could use serveradmin to find out who is connected but in the workgroup config it is not clear if it is OK to run serveradmin since the GUI counterpart "Server Aministrator" is forbidden unless you upgrade to the advanced config. Does anybody know if the CLI serveradmin is OK to use in the WORKGROUP config or know any other way to determine who connected via AFP and SMB and what files they have open? This semms like a terrible security risk without knowing who is doing what.
Thanks
-Chris

Just in case others have the same question, I have determined that the CLI tools can be used to query the file services without any apparent detrimental effects while using our leopard server 10.5.3 in a workgroup configuration. Hence the names of AFP users can be determined from the command line by:
sudo serveradmin command afp:command = getConnectedUsers | grep name
and the smb users can be found with:
sudo serveradmin command smb:command = getConnectedUsers | grep name
Hope that helps
-csl

What setting/application is causing N97 (20.0.027)...

Hello,
I have a Nokia N97 RM-505 black with firmware v20.0.27
Before updating to 20.0.27, I reset the phone with the so called 3 finger salute:
(shift, space, backspace, power button to start), then formatted mass memory, then deleted anything deletable
on c/e drives, then reset to factory setting, and applied 20.0.27 without problems.
I have a lot of applications installed on it, mostly free or purchased from handango
(I don't use ovi store since they don't let me download what I bought for backup).
It took several days to install the applications, I also downloaded a lot of maps to the phone,
as well as mp3s.
The phone worked beautifully, with all installed apps it had around 45MB free,
and responded reasonably quickly.
the problems started when I attempted to restart the phone, it got stuck on
the white startup screen with the blue nokia (so called white screen of death).
After having to do a hard reset and reinstall all several times (not fun),
I googled for a solution (removing/replacing batter and restarting didn't work
after hundreds of attempts. Finally I found a consistent workaround on this forum.
Namely:
1. Make sure phone is not fully charged (at most 2 bars)
2. Shutdown phone
3. Disconnect usb cable, and remove battery
4. Replace battery
5. Reconnect usb cable until you see not only the blue nokia but the animated charging icon on top
(you may have to disconnect and reconnect the usb cable several times for it to show up,
if you don't see it I found it helpful to disconnect the cable from both sides on subsequent attempts)
6. Once you see the charging icon, quickly press and hold the phone power button
(it may not vibrate like you're used to)
until you see the shaking hands connecting people animation and the phone starts
7. tada, you may now use the phone
If it wasn't for 1 downside, I could almost live with this workaround since I have chargers both at home at work,
the downside is that when you do this the phone will be stuck in portrait mode.
Keep in mind that even on 20.0.27 (in fact on all version of the firmware) and even
on the original store bought factory settings phone with nothing installed,
starting the phone while it's charging may cause it will sometimes get stuck in portrait mode.
(forcing you to restart after disconnecting the usb cable)
The difference is when using starting N97 while charging as a workaround for
the white screen of death issue, the phone is guranteed to be stuck in portrait mode,
instead of it only occasionally happening.
In any case, hoping to break the cycle, I took a full backup with ovi Suite 2.0.1.35.
(All checkboxes checked including applications and data).The backup is around 7GB.
I am hoping to do a hard reset (shift, space, backspace, power button),
then format mass memory,
then restore the backup in hopes that I will be able to boot up the phone
without it crashing.
I'm worried about doing this since I've never restored an ovi suite backup before,
I'm also worried because the ovi suite has been very poorly coded to begin with.
2.x is better than the prehistoric 1.X the phone came with
(try opening ovi app maanger on 1.x with 20+ apps installed)
but still even 2.x is beta quality at best,
and it returns strange error codes when i sync contacts.
I have the following questions:
1. Will following the above restore procedure restore all my applications,
music and map data ? has anyone tried it ?
2. There is a distinct possibility that the white screen of death issue will not be resolved
by the restore, in which case I badly need some method to determine what
setting and/or what application is causing the WSOD to begin with.
Preferably some sort of bootup or system log ? Is there even such a thing ?
Keep in mind that when the phone is turned off, and the usb cable is connected,
and the phone is charging mass memory is visible on the PC it is connected to in
windows explorer. Strangely, that is the only time when the sys/system/private
folder content are also visible.
In any case If I can determine what application (if any) is causing the issue,
I'd be happy to give up using it and uninstalling it,
(it beats having a $2000 brick).
3. Is there some method to apply the power on while charging workaround described above,
without having the device get stuck in portrait mode ?
I should mention I also opened a ticket with Nokia support with the same 3 questions,
but I have my fingers crossed, and expect them to simply ignore the questions,
and ask me to either reset it or take it back to the service center. I also requested,
that on some future firmware they consider having some key combination,
to allow starting the phone in (safe mode) with no extra apps or installations on bootup.
I also suggested a visible detailed. bootup log on the root mass memory folder to allow
troubleshooting such issues (if they're worried it can affect performance,
it can be enabled by an option). I don't expect either option to be implemented though.
Nevertheless I would say the WSOD is currently the number one problem with N97 today,
it's a complete showstopper.
The only other issue I suffered after the 20.0.27 upgrade was the stuck lock issue,
where if you click the power button,
and selct lock phone and keys, it is impossible to unlock the phone with the keyguard key on the side of the phone
(it just doesn't do anything). but that has a workaround (have someone call your phone,
then swipe the bottom line right to left to unlock (the top line left to right answers the call).
Cheers and if you've read all of this, thank you for your patience.
Hani
Solved!
Go to Solution.

I think you may be referring to my workaround, as posted here (and various other forums):-
/discussions/board/message?board.id=smartphones&thread.id=179596
I've posted a few times about this. It's not an exact science, and having done it several times since this posting, I've realised that it is not necesary to actually "see" the charging icon. I really only mentioned it so you would recognise what's happening.
The fact is that, with the phone switched off, and then plugged into either the mains power supply, or the PC, by the USB cable, the screen on the phone shows white, as it starts to charge. Whether or not the "charging" icon starts to flash depends on the state of charge of the battery. If it is already full, then the white screen will go off after a while, as the phone doesn't need to be charged. If the battery needs charging, then then flashing icon will show.
This is all largely irrelevant . I only tried this "charging" thing in the first place to distract the phone from whatever problem is stopping it from going through its normal boot process. I thought if I could get the processor doing something else at the time I pressed the power button, it might just pass straight by the boot problem. Given the fact that it has been successful, my guessed logic seems to have been near the mark.
All this logic comes from many years of supporting PC systems. As has been said, this is only a workaround. The reason I've had to do this, is because I've had to do it many times since installing firmware V20.
Now, I have an unbranded UK model, code 0585162. I waited ages for V20, and, in the end, changed the code to get the euro V20. Since the UK V20 has been released, I've been wondering what the difference is, if anything, between the versions.
So today, as I do with my PCs every now and again, I had a good clearout of my phone, and rebuilt it from scratch, using the proper UK V20. I do this with Windows PCs every now and again. It gets rid of all the partially installed and uninstalled apps, temporary files, etc etc.
To prepare, I connected my phone to my PC via USB, and copied the whole of the E drive onto the PC. I gathered together all my downloaded .sis files, .wgz files etc, and made a list of all installed apps to make sure I had all the downloaded installation files.
I "backed up" my phone using PC Suite. I also use Ovi Suite sometimes, but I find PC Suite better, simpler, more technically reliable for "techy" tasks. When you do a backup, you are asked what you want to backup. Since all my music and photos are already on my PC, I don't need to back them up. Similarly my Contacts and Calendar are on the PC. For me the important thing to backup is my phone Settings. By only backing up the Settings, the backup is very quick.
Having made sure I had all my original stuff safely stored on my PC, I then reinstalled the Firmware release V20.
First I did factory reset *#7370#
Then I formatted the E drive.
Then I ran NSU to look for, then reinstall the UK V20 frirmware.
I then did another *#7370#, to be sure.
Then I restored the Settings from my backup
Then I copied the old E drive contents back from the PC (having deleted all the stuff I really didn't need)
And finally I reinstalled all my downloaded apps.
It's only been 24 hours, but so far my phone hasn't frozen at the white screen with the Nokia logo.
Fingers crossed.
As I said earlier, as with PCs, its good, every now and again, to reformat the hard disk and do a fresh install of Windows, then re-install your apps. My laptop seems to be slowly grinding to a halt, so I'm about to do the same for it.
More fingers crossed.
Message Edited by 2bad on 29-Nov-2009 09:55 PM

How to provide authorization to set the statuses in Design registration

Hi All,
For HTOR transaction type CRMDRGO status profile has been configured. So based on this status profile the user can set any of the statuses which are there in CRMDRGO.Here the requirement is the user should not be able to set few statuses whicha are there in the CRMDRGO. Means for some of the statuses the user shouldn't have the authorization to set.For this I have created one authorization code and i have configured in CRMDRGO.How can i achieve this requirement.can anybody help me out regarding this.Thanks in advance....
Regards,
Laxman.P

In webUI GET_V for this attribute, make the available values as desired by restricting some values for a certain usergroup or role or on a certain value of a certain Authorization Object.

How to determine who has a PDF file open?

I generate a daily report in PDF format and place the file on a shared server. The problem arises when I attempt to delete the file (in order to replace with the new version) and someone has the file open. I end up with two versions of file on she share drive. The only way to determine which is the current file is due to the date I place at the end of the file name.
Is there a way to determine who has the file open? This would eliminate confusion amongst my peers.
Thank you.

This is not a feature of Acrobat. You may be able to look at the server logs.

How do I determine who/what device is connected to my home wifi?

Need to see who is connected to my home wifi and how much usage.

As EG said, when you put in your username and password on the Comcast gateway (Default username: adminpassword: password ) on that very first page you'll see in orange :"Connected Devices" which will show any device connected to your wi-fi. Click on "View Connected Devices" for more information. You obviously should not see more devices than you have in your household. If you click on "Edit" you'll be able to name each device. If there's something you don't recognize just click on the "X" and it'll be gone. If this is a problem change your network key password by clicking "Connection" and then "Wi-Fi" from that home page. There you can click on "Edit" and change your network password to keep them out. There is no way with the Comcast firmware you can see the usage from each device.

How to determine the timeout setting?

I read all the items about the time out. I created a javascript function which informs you that you only have 5 (after that 1) minutes before logout. But in the profile file the setting for http timeout 180 and the rz11 setting icm/keep_alive_timeout is set to 60. But when waitng for 180 seconds I can still go on with the application. No timeout occur.
How can I determine the real timeout so I can use this in the setting for the Javascript (reading it for the system and concatenate into the javascript statement)!
With regards,
Frank Roels

Hai Frank,
You can follow the methodology described by thomas in this blog.
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1063. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
When I have opened this blog now it was not opened properly(Formating lost),Make sure that u read it properly.
Regard,
venkatesh.

How to determine who performed the last full database dump before cumulative dump

Hello,
ASE 15.7 SP100 allows cumulative backups, and if cumulative dump is tried before a full dump, ASE shows this error:
You cannot execute an incremental dump before a full database dump.
From my experiments, it seems that it does not matter how the full dump is performed (by native isql, or by a 3rd party API). As long as a full dump is done on a database, ASE seems to be keeping track of all the changed pages since the last full dump. So this means that you can perform a full dump using a 3rd party API, and then on isql, if you run a cumulative dump command, the cumulative dump succeeds, which is based on the last full dump by another library!
So, my question is: is there any way to programmatically determine how (by native isql or 3rd party) the last full backup was performed? I believe $SYBASE_HOME/ASE-15_0/dumphist contains this info, but it requires 'enable dump history' to be set first, and I am looking for a solution which does not involve checking a disk file.
Thanks,
Ali

Dear Mr Razib,
I have not explored the feature but ASE autiding might provide you the possibility to access information on past database dumps via SQL.
Apart from that - I am not aware of an SQL interface to the dumphist file (would be nice to have, I agree)
Enabling dump history is definitley highly recommended (in my opinion) .
There is yet another feature which might help you to prevent an DBA from dumping databases and transactions to various locations.
When you create a DUMP CONFIGURATION and additionally set parameter
enforce dump configuration
ASE will prevent normal (free style) DUMP commands but enforce the use of an existing dump configuration. The mechanism is not fool proof (nothing prevents from creating yet another dump configuration on the fly) - but at least something.
With kind regards
Tilman Model-Bosch

How to determine active enhancement set

Hi there,
I have enhanced a SAP component and I have added a customer specific button. In the event handler of this button I would like to know which enhancement set is currently active.
Is it possible to determine this information somehow?
Thanks,
Karsten

Hello Karsten
If there are no custom implementations of BADI COMPONENT_LOADING, then it will be as indicated by Naresh in the previous reply, a query to table BSPWD_EHSET_ASGN with the client in the where clause should do. This is precisely what is done in the default implementation of BADI COMPONENT_LOADING, in method GET_ACTIVE_ENHANCEMENT_SET.
If there is a custom implementation of BADI COMPONENT_LOADING then each user can have his own enhancement set assigned. Method GET_ACTIVE_ENHANCEMENT_SET of the custom implementation of the BADI would return the active enhancement set.
Best Regards
Luis Rivera

How to determine query used in Inventory Status (Available-to-Promise) List

Hi,
I'm trying to create a query that will give me commited qty per item per day. I tried checking table used in the Inventory Status(Available-to-Promise) by enabling systmen information under view buth the SAP is giving me "form=154 Item100000054 Pane3 ......... " Can somebody explain or guide me on how i can create the query.
Regards

Hi,
Welcome you post on the forum.
Do you need a query report or a formatted search query?
Thanks,
Gordon

How to determine on what segment a point is in

i have line segments that are connected and assuming that i can get the points of the segments, how do i know on what segment the point is in?

import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.*;
public class ProximityTest extends JPanel {
    Color[] colors = { Color.red, Color.green.darker(), Color.blue };
    Line2D.Double[] lines;
    Point probe;
    Point offset = new Point(5,20);
    JLabel lineLabel;
    JLabel distLabel;
    public ProximityTest() {
        lines = new Line2D.Double[3];
        lines[0] = new Line2D.Double(50,50,350,250);
        lines[1] = new Line2D.Double(50,350,375,150);
        lines[2] = new Line2D.Double(100,50,150,350);
        probe = new Point();
        addMouseMotionListener(mml);
    protected void paintComponent(Graphics g) {
        super.paintComponent(g);
        Graphics2D g2 = (Graphics2D)g;
        g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                            RenderingHints.VALUE_ANTIALIAS_ON);
        for(int j = 0; j < lines.length; j++) {
            g2.setPaint(colors[j]);
            g2.draw(lines[j]);
        g2.setPaint(Color.red);
        g2.fill(new Ellipse2D.Double(probe.x-2,probe.y-2,4,4));
    private void checkProximity() {
        int index = -1;
        double min = Double.MAX_VALUE;
        for(int j = 0; j < lines.length; j++) {
            double distance = lines[j].ptSegDist(probe);
            if(distance < min) {
                min = distance;
                index = j;
        lineLabel.setForeground(colors[index]);
        distLabel.setText(String.format("%.1f", min));
    private JPanel getLast() {
        lineLabel = new JLabel("line");
        distLabel = new JLabel(" ");
        Dimension d = distLabel.getPreferredSize();
        d.width = 45;
        distLabel.setPreferredSize(d);
        JPanel panel = new JPanel(new GridBagLayout());
        GridBagConstraints gbc = new GridBagConstraints();
        gbc.insets = new Insets(2,2,2,2);
        gbc.anchor = GridBagConstraints.WEST;
        gbc.weightx = 1.0;
        panel.add(new JLabel(), gbc);
        gbc.weightx = 0;
        panel.add(new JLabel("closest"), gbc);
        panel.add(lineLabel, gbc);
        panel.add(distLabel, gbc);
        gbc.weightx = 1.0;
        panel.add(new JLabel(), gbc);
        return panel;
    public static void main(String[] args) {
        ProximityTest test = new ProximityTest();
        JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(test);
        f.getContentPane().add(test.getLast(), "Last");
        f.setSize(400,400);
        f.setLocation(200,200);
        f.setVisible(true);
    private MouseMotionListener mml = new MouseMotionAdapter() {
        public void mouseMoved(MouseEvent e) {
            Point p = e.getPoint();
            probe.setLocation(p.x-offset.x, p.y-offset.y);
            checkProximity();
            repaint();
}

How to determine who has activated Office 365 ProPlus?

Is there a way to see who a copy of Office 365 ProPlus has been activated by, without logging into the user's Office 365 portal? Does this get tracked in some report, or some registry key? Thanks.

Hi,
In the current forum, we mainly support Office Client Applications, since we are talking about the activation question about Office 365, I suggest you post the question in Office 365 Community to get the proper support:
http://community.office365.com/en-us/f/default.aspx
We may need to contact the customer service to get more information about the activation questions:
http://support2.microsoft.com/gp/customer-service-phone-numbers/en-us
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How To Determine from what modifier line a pricing attribute is called

Hello,
We would like to know from what modifier line a pricing attribute is called.
When creating the attribute mapping you have the global record structure to your disposal,
however do you also have the opportunity to determine the modifier line id.
We would like to create some modifiers with some pricing attributes (using attribute mapping)
and those pricing attributes should return different results based on the modifier they are attached to.
Many thanks!
rgds
Leen
Edited by: user798765 on Apr 13, 2010 6:25 AM

The only one I know is using java version 1.4:
http://java.sun.com/j2se/1.4/docs/api/java/lang/Throwable.html#getStackTrace()

How can I tell what setting was used to create a received PDF?

I get PDFs all the time and I can't find a way of knowing if the PDF was created using Press Quality, Standard, Smallest File size other than just looking at it and zooming in.
Is there a menu item or trick that will tell me how this PDF was created?

The image was almost 9 inches by 7 inches at 300 ppi and I reduced it to about 3 inches wide in my document. I almost never blow-up images unless they can take it without losing resolution.
Maybe I'm not looking in the right place. I went to preflight > sheetfed offset, clicked on Analyze and got lots of readings. The one that said "Resolution of color and grayscale images is less than 150 ppi. This might be insufficient for proper print results." is the one that threw me.
It's too bad that I just can't read how the file was created. Most of clients I deal with make PDFs and never look at the settings they use. I'm in the printing business.
I've just been looking at the PDFs sent to me and zooming in to see if they'll hold up but I'd really like something more accurate.

How to see who/what is on my router.. please?

Thanks for looking.
I would like to view what ips / ssid's are on both sides of my router. for example, the LAN side and the WAN side.
i'd like to do this for both the existing AE "n" and "g"
Thanks tons
Tom

Just another related question to this. When I look
at the wireless clients it also says signal and
noise. The numbers are -53 and -92 respectively.
What do these numbers mean and what range should
these be in? Thanks.
It's the measure of the power of your transmitter, for both signal and interference. Here's a quote from one website:
dBm (dB milliWatt)
A signal strength or power level; 0 dBm is defined as 1 mW (milliWatt) of power into a terminating load such as an antenna or power meter. Small signals are negative numbers (e.g. -83 dBm). For example, typical 802.11b WLAN cards have +15 dBm (32mW) of output power. They also spec a -83 dBm RX sensitivity (minimum RX signal level required for 11Mbps reception). Additionally, 125 mW is 21 dBm, and 250 mW is 24 dBm.
Disclaimer: This really isn't my field, and I'm not enough of (read: not at all) an engineer to tell you what a "good" signal strength ought to be from an 802.11n router. However, dB is a logarithmic scale. A difference of 10 dB = 10-fold difference, a difference of 20 dB = 100-fold, etc. So in comparing your signal to noise numbers (-53 to -92), you've got a spread of ~40, or 10^4 difference, so it's not like you have a lot of interference and degradation of your signal compared to background. FWIW, my mini connected to our AEBN reads out at about -42/-89 (about 15 feet from the router), our MacPro at -45/-92 (about 10 feet and under a desk) and our MacBook at -30/-96 (about 6 feet from the router). Larger (more positive) numbers = stronger.
Intel Mini, Mac Pro, MacBook C2D Mac OS X (10.4.8)
Vista and XP running under Parallels

How to determin who/what set application status "UNAVAILABLE"?

Similar Messages

Maybe you are looking for